; microsoft_edge version: 101.0.1210.32
CLASS MACHINE
  CATEGORY !!microsoft_edge
    KEYNAME "Software\Policies\Microsoft\Edge"

    CATEGORY !!Other_Category
      POLICY !!PromptOnMultipleMatchingCertificates_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V100
        #endif
        EXPLAIN !!PromptOnMultipleMatchingCertificates_Explain
        VALUENAME "PromptOnMultipleMatchingCertificates"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!ApplicationGuard_Category
      POLICY !!ApplicationGuardContainerProxy_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V84
        #endif
        EXPLAIN !!ApplicationGuardContainerProxy_Explain

        PART !!ApplicationGuardContainerProxy_Part  EDITTEXT
          VALUENAME "ApplicationGuardContainerProxy"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!ApplicationGuardFavoritesSyncEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V90
        #endif
        EXPLAIN !!ApplicationGuardFavoritesSyncEnabled_Explain
        VALUENAME "ApplicationGuardFavoritesSyncEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!ApplicationGuardPassiveModeEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V94
        #endif
        EXPLAIN !!ApplicationGuardPassiveModeEnabled_Explain
        VALUENAME "ApplicationGuardPassiveModeEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!ApplicationGuardTrafficIdentificationEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V91
        #endif
        EXPLAIN !!ApplicationGuardTrafficIdentificationEnabled_Explain
        VALUENAME "ApplicationGuardTrafficIdentificationEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!ApplicationGuardUploadBlockingEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!ApplicationGuardUploadBlockingEnabled_Explain
        VALUENAME "ApplicationGuardUploadBlockingEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!GoogleCast_Category
      POLICY !!EnableMediaRouter_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!EnableMediaRouter_Explain
        VALUENAME "EnableMediaRouter"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!ShowCastIconInToolbar_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ShowCastIconInToolbar_Explain
        VALUENAME "ShowCastIconInToolbar"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Experimentation_Category
      POLICY !!FeatureFlagOverridesControl_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!FeatureFlagOverridesControl_Explain

        PART !!FeatureFlagOverridesControl_Part  DROPDOWNLIST
          VALUENAME "FeatureFlagOverridesControl"
          ITEMLIST
            NAME !!FeatureFlagOverridesControl_CommandLineOverridesEnabled_DropDown VALUE NUMERIC 2
            NAME !!FeatureFlagOverridesControl_OverridesEnabled_DropDown VALUE NUMERIC 1
            NAME !!FeatureFlagOverridesControl_OverridesDisabled_DropDown VALUE NUMERIC 0
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!HTTPAuthentication_Category
      POLICY !!AuthSchemes_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!AuthSchemes_Explain

        PART !!AuthSchemes_Part  EDITTEXT
          VALUENAME "AuthSchemes"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DisableAuthNegotiateCnameLookup_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DisableAuthNegotiateCnameLookup_Explain
        VALUENAME "DisableAuthNegotiateCnameLookup"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!EnableAuthNegotiatePort_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!EnableAuthNegotiatePort_Explain
        VALUENAME "EnableAuthNegotiatePort"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!BasicAuthOverHttpEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!BasicAuthOverHttpEnabled_Explain
        VALUENAME "BasicAuthOverHttpEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!AuthServerAllowlist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!AuthServerAllowlist_Explain

        PART !!AuthServerAllowlist_Part  EDITTEXT
          VALUENAME "AuthServerAllowlist"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!AuthNegotiateDelegateAllowlist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!AuthNegotiateDelegateAllowlist_Explain

        PART !!AuthNegotiateDelegateAllowlist_Part  EDITTEXT
          VALUENAME "AuthNegotiateDelegateAllowlist"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!AllowCrossOriginAuthPrompt_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!AllowCrossOriginAuthPrompt_Explain
        VALUENAME "AllowCrossOriginAuthPrompt"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!WindowsHelloForHTTPAuthEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V90
        #endif
        EXPLAIN !!WindowsHelloForHTTPAuthEnabled_Explain
        VALUENAME "WindowsHelloForHTTPAuthEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Identity_Category
      POLICY !!ImplicitSignInEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!ImplicitSignInEnabled_Explain
        VALUENAME "ImplicitSignInEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!OneAuthAuthenticationEnforced_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!OneAuthAuthenticationEnforced_Explain
        VALUENAME "OneAuthAuthenticationEnforced"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!OnlyOnPremisesImplicitSigninEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V94
        #endif
        EXPLAIN !!OnlyOnPremisesImplicitSigninEnabled_Explain
        VALUENAME "OnlyOnPremisesImplicitSigninEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!EdgeDefaultProfileEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V101
        #endif
        EXPLAIN !!EdgeDefaultProfileEnabled_Explain

        PART !!EdgeDefaultProfileEnabled_Part  EDITTEXT
          VALUENAME "EdgeDefaultProfileEnabled"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!WAMAuthBelowWin10RS3Enabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!WAMAuthBelowWin10RS3Enabled_Explain
        VALUENAME "WAMAuthBelowWin10RS3Enabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!NativeMessaging_Category
      POLICY !!NativeMessagingBlocklist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NativeMessagingBlocklist_Explain

        PART !!NativeMessagingBlocklist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\NativeMessagingBlocklist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NativeMessagingAllowlist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NativeMessagingAllowlist_Explain

        PART !!NativeMessagingAllowlist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\NativeMessagingAllowlist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NativeMessagingUserLevelHosts_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NativeMessagingUserLevelHosts_Explain
        VALUENAME "NativeMessagingUserLevelHosts"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!ContentSettings_Category
      POLICY !!DefaultCookiesSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultCookiesSetting_Explain

        PART !!DefaultCookiesSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultCookiesSetting"
          ITEMLIST
            NAME !!DefaultCookiesSetting_AllowCookies_DropDown VALUE NUMERIC 1
            NAME !!DefaultCookiesSetting_BlockCookies_DropDown VALUE NUMERIC 2
            NAME !!DefaultCookiesSetting_SessionOnly_DropDown VALUE NUMERIC 4
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultFileSystemReadGuardSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!DefaultFileSystemReadGuardSetting_Explain

        PART !!DefaultFileSystemReadGuardSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultFileSystemReadGuardSetting"
          ITEMLIST
            NAME !!DefaultFileSystemReadGuardSetting_BlockFileSystemRead_DropDown VALUE NUMERIC 2
            NAME !!DefaultFileSystemReadGuardSetting_AskFileSystemRead_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultFileSystemWriteGuardSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!DefaultFileSystemWriteGuardSetting_Explain

        PART !!DefaultFileSystemWriteGuardSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultFileSystemWriteGuardSetting"
          ITEMLIST
            NAME !!DefaultFileSystemWriteGuardSetting_BlockFileSystemWrite_DropDown VALUE NUMERIC 2
            NAME !!DefaultFileSystemWriteGuardSetting_AskFileSystemWrite_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultImagesSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultImagesSetting_Explain

        PART !!DefaultImagesSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultImagesSetting"
          ITEMLIST
            NAME !!DefaultImagesSetting_AllowImages_DropDown VALUE NUMERIC 1
            NAME !!DefaultImagesSetting_BlockImages_DropDown VALUE NUMERIC 2
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultInsecureContentSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!DefaultInsecureContentSetting_Explain

        PART !!DefaultInsecureContentSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultInsecureContentSetting"
          ITEMLIST
            NAME !!DefaultInsecureContentSetting_BlockInsecureContent_DropDown VALUE NUMERIC 2
            NAME !!DefaultInsecureContentSetting_AllowExceptionsInsecureContent_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultJavaScriptSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultJavaScriptSetting_Explain

        PART !!DefaultJavaScriptSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultJavaScriptSetting"
          ITEMLIST
            NAME !!DefaultJavaScriptSetting_AllowJavaScript_DropDown VALUE NUMERIC 1
            NAME !!DefaultJavaScriptSetting_BlockJavaScript_DropDown VALUE NUMERIC 2
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultJavaScriptJitSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!DefaultJavaScriptJitSetting_Explain

        PART !!DefaultJavaScriptJitSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultJavaScriptJitSetting"
          ITEMLIST
            NAME !!DefaultJavaScriptJitSetting_AllowJavaScriptJit_DropDown VALUE NUMERIC 1
            NAME !!DefaultJavaScriptJitSetting_BlockJavaScriptJit_DropDown VALUE NUMERIC 2
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultPluginsSetting_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V77_V87
        #endif
        EXPLAIN !!DefaultPluginsSetting_Explain

        PART !!DefaultPluginsSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultPluginsSetting"
          ITEMLIST
            NAME !!DefaultPluginsSetting_BlockPlugins_DropDown VALUE NUMERIC 2
            NAME !!DefaultPluginsSetting_ClickToPlay_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultPopupsSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultPopupsSetting_Explain

        PART !!DefaultPopupsSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultPopupsSetting"
          ITEMLIST
            NAME !!DefaultPopupsSetting_AllowPopups_DropDown VALUE NUMERIC 1
            NAME !!DefaultPopupsSetting_BlockPopups_DropDown VALUE NUMERIC 2
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultNotificationsSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultNotificationsSetting_Explain

        PART !!DefaultNotificationsSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultNotificationsSetting"
          ITEMLIST
            NAME !!DefaultNotificationsSetting_AllowNotifications_DropDown VALUE NUMERIC 1
            NAME !!DefaultNotificationsSetting_BlockNotifications_DropDown VALUE NUMERIC 2
            NAME !!DefaultNotificationsSetting_AskNotifications_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultGeolocationSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultGeolocationSetting_Explain

        PART !!DefaultGeolocationSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultGeolocationSetting"
          ITEMLIST
            NAME !!DefaultGeolocationSetting_AllowGeolocation_DropDown VALUE NUMERIC 1
            NAME !!DefaultGeolocationSetting_BlockGeolocation_DropDown VALUE NUMERIC 2
            NAME !!DefaultGeolocationSetting_AskGeolocation_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultWebBluetoothGuardSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultWebBluetoothGuardSetting_Explain

        PART !!DefaultWebBluetoothGuardSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultWebBluetoothGuardSetting"
          ITEMLIST
            NAME !!DefaultWebBluetoothGuardSetting_BlockWebBluetooth_DropDown VALUE NUMERIC 2
            NAME !!DefaultWebBluetoothGuardSetting_AskWebBluetooth_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultWebUsbGuardSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultWebUsbGuardSetting_Explain

        PART !!DefaultWebUsbGuardSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultWebUsbGuardSetting"
          ITEMLIST
            NAME !!DefaultWebUsbGuardSetting_BlockWebUsb_DropDown VALUE NUMERIC 2
            NAME !!DefaultWebUsbGuardSetting_AskWebUsb_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultWebHidGuardSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V100
        #endif
        EXPLAIN !!DefaultWebHidGuardSetting_Explain

        PART !!DefaultWebHidGuardSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultWebHidGuardSetting"
          ITEMLIST
            NAME !!DefaultWebHidGuardSetting_BlockWebHid_DropDown VALUE NUMERIC 2
            NAME !!DefaultWebHidGuardSetting_AskWebHid_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!ShowPDFDefaultRecommendationsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!ShowPDFDefaultRecommendationsEnabled_Explain
        VALUENAME "ShowPDFDefaultRecommendationsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!AutoSelectCertificateForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!AutoSelectCertificateForUrls_Explain

        PART !!AutoSelectCertificateForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\AutoSelectCertificateForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!CookiesAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!CookiesAllowedForUrls_Explain

        PART !!CookiesAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\CookiesAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!CookiesBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!CookiesBlockedForUrls_Explain

        PART !!CookiesBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\CookiesBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!CookiesSessionOnlyForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!CookiesSessionOnlyForUrls_Explain

        PART !!CookiesSessionOnlyForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\CookiesSessionOnlyForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!FileSystemReadAskForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!FileSystemReadAskForUrls_Explain

        PART !!FileSystemReadAskForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\FileSystemReadAskForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!FileSystemReadBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!FileSystemReadBlockedForUrls_Explain

        PART !!FileSystemReadBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\FileSystemReadBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!FileSystemWriteAskForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!FileSystemWriteAskForUrls_Explain

        PART !!FileSystemWriteAskForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\FileSystemWriteAskForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!FileSystemWriteBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!FileSystemWriteBlockedForUrls_Explain

        PART !!FileSystemWriteBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\FileSystemWriteBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!SpotlightExperiencesAndRecommendationsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!SpotlightExperiencesAndRecommendationsEnabled_Explain
        VALUENAME "SpotlightExperiencesAndRecommendationsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!ImagesAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ImagesAllowedForUrls_Explain

        PART !!ImagesAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ImagesAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ImagesBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ImagesBlockedForUrls_Explain

        PART !!ImagesBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ImagesBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!InsecureContentAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!InsecureContentAllowedForUrls_Explain

        PART !!InsecureContentAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\InsecureContentAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!InsecureContentBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!InsecureContentBlockedForUrls_Explain

        PART !!InsecureContentBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\InsecureContentBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!IntranetFileLinksEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V95
        #endif
        EXPLAIN !!IntranetFileLinksEnabled_Explain
        VALUENAME "IntranetFileLinksEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!JavaScriptAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!JavaScriptAllowedForUrls_Explain

        PART !!JavaScriptAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\JavaScriptAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!JavaScriptBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!JavaScriptBlockedForUrls_Explain

        PART !!JavaScriptBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\JavaScriptBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!JavaScriptJitAllowedForSites_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!JavaScriptJitAllowedForSites_Explain

        PART !!JavaScriptJitAllowedForSites_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\JavaScriptJitAllowedForSites"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!JavaScriptJitBlockedForSites_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!JavaScriptJitBlockedForSites_Explain

        PART !!JavaScriptJitBlockedForSites_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\JavaScriptJitBlockedForSites"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!LegacySameSiteCookieBehaviorEnabled_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V80_V94
        #endif
        EXPLAIN !!LegacySameSiteCookieBehaviorEnabled_Explain

        PART !!LegacySameSiteCookieBehaviorEnabled_Part  DROPDOWNLIST
          VALUENAME "LegacySameSiteCookieBehaviorEnabled"
          ITEMLIST
            NAME !!LegacySameSiteCookieBehaviorEnabled_DefaultToLegacySameSiteCookieBehavior_DropDown VALUE NUMERIC 1
            NAME !!LegacySameSiteCookieBehaviorEnabled_DefaultToSameSiteByDefaultCookieBehavior_DropDown VALUE NUMERIC 2
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!LegacySameSiteCookieBehaviorEnabledForDomainList_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!LegacySameSiteCookieBehaviorEnabledForDomainList_Explain

        PART !!LegacySameSiteCookieBehaviorEnabledForDomainList_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\LegacySameSiteCookieBehaviorEnabledForDomainList"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PluginsAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V77_V87
        #endif
        EXPLAIN !!PluginsAllowedForUrls_Explain

        PART !!PluginsAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PluginsAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PluginsBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V77_V87
        #endif
        EXPLAIN !!PluginsBlockedForUrls_Explain

        PART !!PluginsBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PluginsBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PopupsAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PopupsAllowedForUrls_Explain

        PART !!PopupsAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PopupsAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PopupsBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PopupsBlockedForUrls_Explain

        PART !!PopupsBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PopupsBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NotificationsAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NotificationsAllowedForUrls_Explain

        PART !!NotificationsAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\NotificationsAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NotificationsBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NotificationsBlockedForUrls_Explain

        PART !!NotificationsBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\NotificationsBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!SerialAllowAllPortsForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!SerialAllowAllPortsForUrls_Explain

        PART !!SerialAllowAllPortsForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\SerialAllowAllPortsForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!SerialAllowUsbDevicesForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!SerialAllowUsbDevicesForUrls_Explain

        PART !!SerialAllowUsbDevicesForUrls_Part  EDITTEXT
          VALUENAME "SerialAllowUsbDevicesForUrls"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!WebUsbAllowDevicesForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!WebUsbAllowDevicesForUrls_Explain

        PART !!WebUsbAllowDevicesForUrls_Part  EDITTEXT
          VALUENAME "WebUsbAllowDevicesForUrls"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!WebUsbAskForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!WebUsbAskForUrls_Explain

        PART !!WebUsbAskForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\WebUsbAskForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!WebUsbBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!WebUsbBlockedForUrls_Explain

        PART !!WebUsbBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\WebUsbBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!WebHidAskForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V100
        #endif
        EXPLAIN !!WebHidAskForUrls_Explain

        PART !!WebHidAskForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\WebHidAskForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!WebHidBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V100
        #endif
        EXPLAIN !!WebHidBlockedForUrls_Explain

        PART !!WebHidBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\WebHidBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!KioskMode_Category
      POLICY !!KioskAddressBarEditingEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V87
        #endif
        EXPLAIN !!KioskAddressBarEditingEnabled_Explain
        VALUENAME "KioskAddressBarEditingEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!KioskDeleteDownloadsOnExit_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V87
        #endif
        EXPLAIN !!KioskDeleteDownloadsOnExit_Explain
        VALUENAME "KioskDeleteDownloadsOnExit"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!KioskSwipeGesturesEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V101
        #endif
        EXPLAIN !!KioskSwipeGesturesEnabled_Explain
        VALUENAME "KioskSwipeGesturesEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Manageability_Category
      POLICY !!MAMEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V89
        #endif
        EXPLAIN !!MAMEnabled_Explain
        VALUENAME "MAMEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!PasswordManager_Category
      POLICY !!PasswordManagerEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PasswordManagerEnabled_Explain
        VALUENAME "PasswordManagerEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PasswordManagerBlocklist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V99
        #endif
        EXPLAIN !!PasswordManagerBlocklist_Explain

        PART !!PasswordManagerBlocklist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PasswordManagerBlocklist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PasswordProtectionWarningTrigger_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PasswordProtectionWarningTrigger_Explain

        PART !!PasswordProtectionWarningTrigger_Part  DROPDOWNLIST
          VALUENAME "PasswordProtectionWarningTrigger"
          ITEMLIST
            NAME !!PasswordProtectionWarningTrigger_PasswordProtectionWarningOff_DropDown VALUE NUMERIC 0
            NAME !!PasswordProtectionWarningTrigger_PasswordProtectionWarningOnPasswordReuse_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PasswordProtectionLoginURLs_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PasswordProtectionLoginURLs_Explain

        PART !!PasswordProtectionLoginURLs_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PasswordProtectionLoginURLs"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PasswordProtectionChangePasswordURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PasswordProtectionChangePasswordURL_Explain

        PART !!PasswordProtectionChangePasswordURL_Part  EDITTEXT
          VALUENAME "PasswordProtectionChangePasswordURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!PasswordMonitorAllowed_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!PasswordMonitorAllowed_Explain
        VALUENAME "PasswordMonitorAllowed"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PasswordGeneratorEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!PasswordGeneratorEnabled_Explain
        VALUENAME "PasswordGeneratorEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrimaryPasswordSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!PrimaryPasswordSetting_Explain

        PART !!PrimaryPasswordSetting_Part  DROPDOWNLIST
          VALUENAME "PrimaryPasswordSetting"
          ITEMLIST
            NAME !!PrimaryPasswordSetting_Automatically_DropDown VALUE NUMERIC 0
            NAME !!PrimaryPasswordSetting_WithDevicePassword_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Performance_Category
      POLICY !!StartupBoostEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!StartupBoostEnabled_Explain
        VALUENAME "StartupBoostEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!EfficiencyMode_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!EfficiencyMode_Explain

        PART !!EfficiencyMode_Part  DROPDOWNLIST
          VALUENAME "EfficiencyMode"
          ITEMLIST
            NAME !!EfficiencyMode_AlwaysActive_DropDown VALUE NUMERIC 0
            NAME !!EfficiencyMode_NeverActive_DropDown VALUE NUMERIC 1
            NAME !!EfficiencyMode_ActiveWhenUnplugged_DropDown VALUE NUMERIC 2
            NAME !!EfficiencyMode_ActiveWhenUnpluggedBatteryLow_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!ScreenCapture_Category
      POLICY !!ScreenCaptureAllowedByOrigins_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!ScreenCaptureAllowedByOrigins_Explain

        PART !!ScreenCaptureAllowedByOrigins_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ScreenCaptureAllowedByOrigins"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!WindowCaptureAllowedByOrigins_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!WindowCaptureAllowedByOrigins_Explain

        PART !!WindowCaptureAllowedByOrigins_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\WindowCaptureAllowedByOrigins"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!TabCaptureAllowedByOrigins_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!TabCaptureAllowedByOrigins_Explain

        PART !!TabCaptureAllowedByOrigins_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\TabCaptureAllowedByOrigins"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!SameOriginTabCaptureAllowedByOrigins_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!SameOriginTabCaptureAllowedByOrigins_Explain

        PART !!SameOriginTabCaptureAllowedByOrigins_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\SameOriginTabCaptureAllowedByOrigins"
          VALUEPREFIX ""
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!PrivateNetworkRequestSettings_Category
      POLICY !!InsecurePrivateNetworkRequestsAllowed_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V92
        #endif
        EXPLAIN !!InsecurePrivateNetworkRequestsAllowed_Explain
        VALUENAME "InsecurePrivateNetworkRequestsAllowed"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!InsecurePrivateNetworkRequestsAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V92
        #endif
        EXPLAIN !!InsecurePrivateNetworkRequestsAllowedForUrls_Explain

        PART !!InsecurePrivateNetworkRequestsAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\InsecurePrivateNetworkRequestsAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Proxy_Category
      POLICY !!ProxyMode_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ProxyMode_Explain

        PART !!ProxyMode_Part  DROPDOWNLIST
          VALUENAME "ProxyMode"
          ITEMLIST
            NAME !!ProxyMode_ProxyDisabled_DropDown VALUE "direct"
            NAME !!ProxyMode_ProxyAutoDetect_DropDown VALUE "auto_detect"
            NAME !!ProxyMode_ProxyPacScript_DropDown VALUE "pac_script"
            NAME !!ProxyMode_ProxyFixedServers_DropDown VALUE "fixed_servers"
            NAME !!ProxyMode_ProxyUseSystem_DropDown VALUE "system"
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!ProxyServer_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ProxyServer_Explain

        PART !!ProxyServer_Part  EDITTEXT
          VALUENAME "ProxyServer"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!ProxyPacUrl_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ProxyPacUrl_Explain

        PART !!ProxyPacUrl_Part  EDITTEXT
          VALUENAME "ProxyPacUrl"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!ProxyBypassList_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ProxyBypassList_Explain

        PART !!ProxyBypassList_Part  EDITTEXT
          VALUENAME "ProxyBypassList"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!ProxySettings_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ProxySettings_Explain

        PART !!ProxySettings_Part  EDITTEXT
          VALUENAME "ProxySettings"
          MAXLEN 1000000
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!SleepingTabs_Category
      POLICY !!SleepingTabsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsEnabled_Explain
        VALUENAME "SleepingTabsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SleepingTabsTimeout_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsTimeout_Explain

        PART !!SleepingTabsTimeout_Part  DROPDOWNLIST
          VALUENAME "SleepingTabsTimeout"
          ITEMLIST
            NAME !!SleepingTabsTimeout_5Minutes_DropDown VALUE NUMERIC 300
            NAME !!SleepingTabsTimeout_15Minutes_DropDown VALUE NUMERIC 900
            NAME !!SleepingTabsTimeout_30Minutes_DropDown VALUE NUMERIC 1800
            NAME !!SleepingTabsTimeout_1Hour_DropDown VALUE NUMERIC 3600
            NAME !!SleepingTabsTimeout_2Hours_DropDown VALUE NUMERIC 7200
            NAME !!SleepingTabsTimeout_3Hours_DropDown VALUE NUMERIC 10800
            NAME !!SleepingTabsTimeout_6Hours_DropDown VALUE NUMERIC 21600
            NAME !!SleepingTabsTimeout_12Hours_DropDown VALUE NUMERIC 43200
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!SleepingTabsBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsBlockedForUrls_Explain

        PART !!SleepingTabsBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\SleepingTabsBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!SmartScreen_Category
      POLICY !!SmartScreenEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!SmartScreenEnabled_Explain
        VALUENAME "SmartScreenEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewSmartScreenLibraryEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V95
        #endif
        EXPLAIN !!NewSmartScreenLibraryEnabled_Explain
        VALUENAME "NewSmartScreenLibraryEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PreventSmartScreenPromptOverride_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PreventSmartScreenPromptOverride_Explain
        VALUENAME "PreventSmartScreenPromptOverride"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PreventSmartScreenPromptOverrideForFiles_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PreventSmartScreenPromptOverrideForFiles_Explain
        VALUENAME "PreventSmartScreenPromptOverrideForFiles"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenAllowListDomains_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!SmartScreenAllowListDomains_Explain

        PART !!SmartScreenAllowListDomains_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\SmartScreenAllowListDomains"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!SmartScreenForTrustedDownloadsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V78
        #endif
        EXPLAIN !!SmartScreenForTrustedDownloadsEnabled_Explain
        VALUENAME "SmartScreenForTrustedDownloadsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenPuaEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!SmartScreenPuaEnabled_Explain
        VALUENAME "SmartScreenPuaEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenDnsRequestsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!SmartScreenDnsRequestsEnabled_Explain
        VALUENAME "SmartScreenDnsRequestsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!DefaultSearchProvider_Category
      POLICY !!DefaultSearchProviderEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderEnabled_Explain
        VALUENAME "DefaultSearchProviderEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!DefaultSearchProviderName_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderName_Explain

        PART !!DefaultSearchProviderName_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderName"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderKeyword_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderKeyword_Explain

        PART !!DefaultSearchProviderKeyword_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderKeyword"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderSearchURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderSearchURL_Explain

        PART !!DefaultSearchProviderSearchURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderSearchURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderSuggestURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderSuggestURL_Explain

        PART !!DefaultSearchProviderSuggestURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderSuggestURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderEncodings_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderEncodings_Explain

        PART !!DefaultSearchProviderEncodings_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\DefaultSearchProviderEncodings"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderImageURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderImageURL_Explain

        PART !!DefaultSearchProviderImageURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderImageURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderImageURLPostParams_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderImageURLPostParams_Explain

        PART !!DefaultSearchProviderImageURLPostParams_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderImageURLPostParams"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPageSearchBox_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!NewTabPageSearchBox_Explain

        PART !!NewTabPageSearchBox_Part  DROPDOWNLIST
          VALUENAME "NewTabPageSearchBox"
          ITEMLIST
            NAME !!NewTabPageSearchBox_bing_DropDown VALUE "bing"
            NAME !!NewTabPageSearchBox_redirect_DropDown VALUE "redirect"
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Startup_Category
      POLICY !!ShowHomeButton_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ShowHomeButton_Explain
        VALUENAME "ShowHomeButton"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!HomepageLocation_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!HomepageLocation_Explain

        PART !!HomepageLocation_Part  EDITTEXT
          VALUENAME "HomepageLocation"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!HomepageIsNewTabPage_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!HomepageIsNewTabPage_Explain
        VALUENAME "HomepageIsNewTabPage"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewTabPageAllowedBackgroundTypes_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!NewTabPageAllowedBackgroundTypes_Explain

        PART !!NewTabPageAllowedBackgroundTypes_Part  DROPDOWNLIST
          VALUENAME "NewTabPageAllowedBackgroundTypes"
          ITEMLIST
            NAME !!NewTabPageAllowedBackgroundTypes_DisableImageOfTheDay_DropDown VALUE NUMERIC 1
            NAME !!NewTabPageAllowedBackgroundTypes_DisableCustomImage_DropDown VALUE NUMERIC 2
            NAME !!NewTabPageAllowedBackgroundTypes_DisableAll_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!NewTabPageLocation_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NewTabPageLocation_Explain

        PART !!NewTabPageLocation_Part  EDITTEXT
          VALUENAME "NewTabPageLocation"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPageSetFeedType_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V79_V92
        #endif
        EXPLAIN !!NewTabPageSetFeedType_Explain

        PART !!NewTabPageSetFeedType_Part  DROPDOWNLIST
          VALUENAME "NewTabPageSetFeedType"
          ITEMLIST
            NAME !!NewTabPageSetFeedType_News_DropDown VALUE NUMERIC 0
            NAME !!NewTabPageSetFeedType_Office_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!RestoreOnStartup_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!RestoreOnStartup_Explain

        PART !!RestoreOnStartup_Part  DROPDOWNLIST
          VALUENAME "RestoreOnStartup"
          ITEMLIST
            NAME !!RestoreOnStartup_RestoreOnStartupIsNewTabPage_DropDown VALUE NUMERIC 5
            NAME !!RestoreOnStartup_RestoreOnStartupIsLastSession_DropDown VALUE NUMERIC 1
            NAME !!RestoreOnStartup_RestoreOnStartupIsURLs_DropDown VALUE NUMERIC 4
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!RestoreOnStartupURLs_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!RestoreOnStartupURLs_Explain

        PART !!RestoreOnStartupURLs_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\RestoreOnStartupURLs"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NewTabPageCompanyLogo_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V79_V85
        #endif
        EXPLAIN !!NewTabPageCompanyLogo_Explain

        PART !!NewTabPageCompanyLogo_Part  EDITTEXT
          VALUENAME "NewTabPageCompanyLogo"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPageContentEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V91
        #endif
        EXPLAIN !!NewTabPageContentEnabled_Explain
        VALUENAME "NewTabPageContentEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewTabPageHideDefaultTopSites_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NewTabPageHideDefaultTopSites_Explain
        VALUENAME "NewTabPageHideDefaultTopSites"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewTabPageManagedQuickLinks_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V79
        #endif
        EXPLAIN !!NewTabPageManagedQuickLinks_Explain

        PART !!NewTabPageManagedQuickLinks_Part  EDITTEXT
          VALUENAME "NewTabPageManagedQuickLinks"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPagePrerenderEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!NewTabPagePrerenderEnabled_Explain
        VALUENAME "NewTabPagePrerenderEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewTabPageQuickLinksEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V91
        #endif
        EXPLAIN !!NewTabPageQuickLinksEnabled_Explain
        VALUENAME "NewTabPageQuickLinksEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!TyposquattingChecker_Category
      POLICY !!TyposquattingCheckerEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!TyposquattingCheckerEnabled_Explain
        VALUENAME "TyposquattingCheckerEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Printing_Category
      POLICY !!PrintingEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PrintingEnabled_Explain
        VALUENAME "PrintingEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrintingAllowedBackgroundGraphicsModes_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V89
        #endif
        EXPLAIN !!PrintingAllowedBackgroundGraphicsModes_Explain

        PART !!PrintingAllowedBackgroundGraphicsModes_Part  DROPDOWNLIST
          VALUENAME "PrintingAllowedBackgroundGraphicsModes"
          ITEMLIST
            NAME !!PrintingAllowedBackgroundGraphicsModes_any_DropDown VALUE "any"
            NAME !!PrintingAllowedBackgroundGraphicsModes_enabled_DropDown VALUE "enabled"
            NAME !!PrintingAllowedBackgroundGraphicsModes_disabled_DropDown VALUE "disabled"
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PrintingBackgroundGraphicsDefault_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V89
        #endif
        EXPLAIN !!PrintingBackgroundGraphicsDefault_Explain

        PART !!PrintingBackgroundGraphicsDefault_Part  DROPDOWNLIST
          VALUENAME "PrintingBackgroundGraphicsDefault"
          ITEMLIST
            NAME !!PrintingBackgroundGraphicsDefault_enabled_DropDown VALUE "enabled"
            NAME !!PrintingBackgroundGraphicsDefault_disabled_DropDown VALUE "disabled"
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PrintingPaperSizeDefault_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!PrintingPaperSizeDefault_Explain

        PART !!PrintingPaperSizeDefault_Part  EDITTEXT
          VALUENAME "PrintingPaperSizeDefault"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!UseSystemPrintDialog_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!UseSystemPrintDialog_Explain
        VALUENAME "UseSystemPrintDialog"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrintHeaderFooter_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PrintHeaderFooter_Explain
        VALUENAME "PrintHeaderFooter"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!DefaultPrinterSelection_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultPrinterSelection_Explain

        PART !!DefaultPrinterSelection_Part  EDITTEXT
          VALUENAME "DefaultPrinterSelection"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!PrintPreviewUseSystemDefaultPrinter_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PrintPreviewUseSystemDefaultPrinter_Explain
        VALUENAME "PrintPreviewUseSystemDefaultPrinter"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrinterTypeDenyList_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!PrinterTypeDenyList_Explain

        PART !!PrinterTypeDenyList_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PrinterTypeDenyList"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PrintRasterizationMode_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V90
        #endif
        EXPLAIN !!PrintRasterizationMode_Explain

        PART !!PrintRasterizationMode_Part  DROPDOWNLIST
          VALUENAME "PrintRasterizationMode"
          ITEMLIST
            NAME !!PrintRasterizationMode_Full_DropDown VALUE NUMERIC 0
            NAME !!PrintRasterizationMode_Fast_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PrintRasterizePdfDpi_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!PrintRasterizePdfDpi_Explain

        PART !!PrintRasterizePdfDpi_Part  NUMERIC
          VALUENAME "PrintRasterizePdfDpi"
          MIN 0 MAX 2000000000
        END PART
      END POLICY

      POLICY !!PrintingWebpageLayout_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!PrintingWebpageLayout_Explain

        PART !!PrintingWebpageLayout_Part  DROPDOWNLIST
          VALUENAME "PrintingWebpageLayout"
          ITEMLIST
            NAME !!PrintingWebpageLayout_portrait_DropDown VALUE NUMERIC 0
            NAME !!PrintingWebpageLayout_landscape_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PrintPostScriptMode_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!PrintPostScriptMode_Explain

        PART !!PrintPostScriptMode_Part  DROPDOWNLIST
          VALUENAME "PrintPostScriptMode"
          ITEMLIST
            NAME !!PrintPostScriptMode_Default_DropDown VALUE NUMERIC 0
            NAME !!PrintPostScriptMode_Type42_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PrintStickySettings_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V98
        #endif
        EXPLAIN !!PrintStickySettings_Explain

        PART !!PrintStickySettings_Part  DROPDOWNLIST
          VALUENAME "PrintStickySettings"
          ITEMLIST
            NAME !!PrintStickySettings_EnableAll_DropDown VALUE NUMERIC 0
            NAME !!PrintStickySettings_DisableAll_DropDown VALUE NUMERIC 1
            NAME !!PrintStickySettings_DisablePdf_DropDown VALUE NUMERIC 2
            NAME !!PrintStickySettings_DisableWebpage_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Extensions_Category
      POLICY !!ExtensionInstallBlocklist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionInstallBlocklist_Explain

        PART !!ExtensionInstallBlocklist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ExtensionInstallBlocklist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ExtensionInstallAllowlist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionInstallAllowlist_Explain

        PART !!ExtensionInstallAllowlist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ExtensionInstallAllowlist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ExtensionInstallForcelist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionInstallForcelist_Explain

        PART !!ExtensionInstallForcelist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ExtensionInstallForcelist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ExtensionInstallSources_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionInstallSources_Explain

        PART !!ExtensionInstallSources_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ExtensionInstallSources"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ExtensionAllowedTypes_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionAllowedTypes_Explain

        PART !!ExtensionAllowedTypes_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ExtensionAllowedTypes"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ExtensionSettings_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionSettings_Explain

        PART !!ExtensionSettings_Part  EDITTEXT
          VALUENAME "ExtensionSettings"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!BlockExternalExtensions_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!BlockExternalExtensions_Explain
        VALUENAME "BlockExternalExtensions"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    POLICY !!AADWebSiteSSOUsingThisProfileEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!AADWebSiteSSOUsingThisProfileEnabled_Explain
      VALUENAME "AADWebSiteSSOUsingThisProfileEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AccessibilityImageLabelsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!AccessibilityImageLabelsEnabled_Explain
      VALUENAME "AccessibilityImageLabelsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AddressBarEditingEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!AddressBarEditingEnabled_Explain
      VALUENAME "AddressBarEditingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AddressBarMicrosoftSearchInBingProviderEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!AddressBarMicrosoftSearchInBingProviderEnabled_Explain
      VALUENAME "AddressBarMicrosoftSearchInBingProviderEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AdsSettingForIntrusiveAdsSites_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!AdsSettingForIntrusiveAdsSites_Explain

      PART !!AdsSettingForIntrusiveAdsSites_Part  DROPDOWNLIST
        VALUENAME "AdsSettingForIntrusiveAdsSites"
        ITEMLIST
          NAME !!AdsSettingForIntrusiveAdsSites_AllowAds_DropDown VALUE NUMERIC 1
          NAME !!AdsSettingForIntrusiveAdsSites_BlockAds_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!AdsTransparencyEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V100
      #endif
      EXPLAIN !!AdsTransparencyEnabled_Explain
      VALUENAME "AdsTransparencyEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowDeletingBrowserHistory_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AllowDeletingBrowserHistory_Explain
      VALUENAME "AllowDeletingBrowserHistory"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowFileSelectionDialogs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AllowFileSelectionDialogs_Explain
      VALUENAME "AllowFileSelectionDialogs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowGamesMenu_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!AllowGamesMenu_Explain
      VALUENAME "AllowGamesMenu"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowPopupsDuringPageUnload_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V78_V87
      #endif
      EXPLAIN !!AllowPopupsDuringPageUnload_Explain
      VALUENAME "AllowPopupsDuringPageUnload"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowSurfGame_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!AllowSurfGame_Explain
      VALUENAME "AllowSurfGame"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowSyncXHRInPageDismissal_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V79_V99
      #endif
      EXPLAIN !!AllowSyncXHRInPageDismissal_Explain
      VALUENAME "AllowSyncXHRInPageDismissal"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowTokenBindingForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!AllowTokenBindingForUrls_Explain

      PART !!AllowTokenBindingForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AllowTokenBindingForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!AllowTrackingForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!AllowTrackingForUrls_Explain

      PART !!AllowTrackingForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AllowTrackingForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!AlternateErrorPagesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!AlternateErrorPagesEnabled_Explain
      VALUENAME "AlternateErrorPagesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AlwaysOpenPdfExternally_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AlwaysOpenPdfExternally_Explain
      VALUENAME "AlwaysOpenPdfExternally"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AmbientAuthenticationInPrivateModesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!AmbientAuthenticationInPrivateModesEnabled_Explain

      PART !!AmbientAuthenticationInPrivateModesEnabled_Part  DROPDOWNLIST
        VALUENAME "AmbientAuthenticationInPrivateModesEnabled"
        ITEMLIST
          NAME !!AmbientAuthenticationInPrivateModesEnabled_RegularOnly_DropDown VALUE NUMERIC 0
          NAME !!AmbientAuthenticationInPrivateModesEnabled_InPrivateAndRegular_DropDown VALUE NUMERIC 1
          NAME !!AmbientAuthenticationInPrivateModesEnabled_GuestAndRegular_DropDown VALUE NUMERIC 2
          NAME !!AmbientAuthenticationInPrivateModesEnabled_All_DropDown VALUE NUMERIC 3
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!AppCacheForceEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V84_V96
      #endif
      EXPLAIN !!AppCacheForceEnabled_Explain
      VALUENAME "AppCacheForceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ApplicationLocaleValue_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ApplicationLocaleValue_Explain

      PART !!ApplicationLocaleValue_Part  EDITTEXT
        VALUENAME "ApplicationLocaleValue"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!AudioCaptureAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AudioCaptureAllowed_Explain
      VALUENAME "AudioCaptureAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AudioCaptureAllowedUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AudioCaptureAllowedUrls_Explain

      PART !!AudioCaptureAllowedUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AudioCaptureAllowedUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!AudioProcessHighPriorityEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!AudioProcessHighPriorityEnabled_Explain
      VALUENAME "AudioProcessHighPriorityEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AudioSandboxEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!AudioSandboxEnabled_Explain
      VALUENAME "AudioSandboxEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutoImportAtFirstRun_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AutoImportAtFirstRun_Explain

      PART !!AutoImportAtFirstRun_Part  DROPDOWNLIST
        VALUENAME "AutoImportAtFirstRun"
        ITEMLIST
          NAME !!AutoImportAtFirstRun_FromDefaultBrowser_DropDown VALUE NUMERIC 0
          NAME !!AutoImportAtFirstRun_FromInternetExplorer_DropDown VALUE NUMERIC 1
          NAME !!AutoImportAtFirstRun_FromGoogleChrome_DropDown VALUE NUMERIC 2
          NAME !!AutoImportAtFirstRun_FromSafari_DropDown VALUE NUMERIC 3
          NAME !!AutoImportAtFirstRun_DisabledAutoImport_DropDown VALUE NUMERIC 4
          NAME !!AutoImportAtFirstRun_FromMozillaFirefox_DropDown VALUE NUMERIC 5
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!AutoLaunchProtocolsComponentEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!AutoLaunchProtocolsComponentEnabled_Explain
      VALUENAME "AutoLaunchProtocolsComponentEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutoLaunchProtocolsFromOrigins_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!AutoLaunchProtocolsFromOrigins_Explain

      PART !!AutoLaunchProtocolsFromOrigins_Part  EDITTEXT
        VALUENAME "AutoLaunchProtocolsFromOrigins"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!AutoOpenAllowedForURLs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!AutoOpenAllowedForURLs_Explain

      PART !!AutoOpenAllowedForURLs_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AutoOpenAllowedForURLs"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!AutoOpenFileTypes_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!AutoOpenFileTypes_Explain

      PART !!AutoOpenFileTypes_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AutoOpenFileTypes"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!AutofillAddressEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AutofillAddressEnabled_Explain
      VALUENAME "AutofillAddressEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutofillCreditCardEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AutofillCreditCardEnabled_Explain
      VALUENAME "AutofillCreditCardEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutomaticHttpsDefault_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!AutomaticHttpsDefault_Explain

      PART !!AutomaticHttpsDefault_Part  DROPDOWNLIST
        VALUENAME "AutomaticHttpsDefault"
        ITEMLIST
          NAME !!AutomaticHttpsDefault_DisableAutomaticHttps_DropDown VALUE NUMERIC 0
          NAME !!AutomaticHttpsDefault_UpgradeCapableDomains_DropDown VALUE NUMERIC 1
          NAME !!AutomaticHttpsDefault_AlwaysUpgrade_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!AutoplayAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!AutoplayAllowed_Explain
      VALUENAME "AutoplayAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutoplayAllowlist_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!AutoplayAllowlist_Explain

      PART !!AutoplayAllowlist_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AutoplayAllowlist"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!BackgroundModeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BackgroundModeEnabled_Explain
      VALUENAME "BackgroundModeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BackgroundTemplateListUpdatesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!BackgroundTemplateListUpdatesEnabled_Explain
      VALUENAME "BackgroundTemplateListUpdatesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BingAdsSuppression_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!BingAdsSuppression_Explain
      VALUENAME "BingAdsSuppression"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BlockThirdPartyCookies_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BlockThirdPartyCookies_Explain
      VALUENAME "BlockThirdPartyCookies"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!FavoritesBarEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!FavoritesBarEnabled_Explain
      VALUENAME "FavoritesBarEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BrowserAddProfileEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BrowserAddProfileEnabled_Explain
      VALUENAME "BrowserAddProfileEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BrowserGuestModeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BrowserGuestModeEnabled_Explain
      VALUENAME "BrowserGuestModeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BrowserLegacyExtensionPointsBlockingEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!BrowserLegacyExtensionPointsBlockingEnabled_Explain
      VALUENAME "BrowserLegacyExtensionPointsBlockingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BrowserNetworkTimeQueriesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BrowserNetworkTimeQueriesEnabled_Explain
      VALUENAME "BrowserNetworkTimeQueriesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BrowserSignin_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BrowserSignin_Explain

      PART !!BrowserSignin_Part  DROPDOWNLIST
        VALUENAME "BrowserSignin"
        ITEMLIST
          NAME !!BrowserSignin_Disable_DropDown VALUE NUMERIC 0
          NAME !!BrowserSignin_Enable_DropDown VALUE NUMERIC 1
          NAME !!BrowserSignin_Force_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!BrowsingDataLifetime_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!BrowsingDataLifetime_Explain

      PART !!BrowsingDataLifetime_Part  EDITTEXT
        VALUENAME "BrowsingDataLifetime"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!BuiltInDnsClientEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BuiltInDnsClientEnabled_Explain
      VALUENAME "BuiltInDnsClientEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!CECPQ2Enabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!CECPQ2Enabled_Explain
      VALUENAME "CECPQ2Enabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!CORSNonWildcardRequestHeadersSupport_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!CORSNonWildcardRequestHeadersSupport_Explain
      VALUENAME "CORSNonWildcardRequestHeadersSupport"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!CertificateTransparencyEnforcementDisabledForCas_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!CertificateTransparencyEnforcementDisabledForCas_Explain

      PART !!CertificateTransparencyEnforcementDisabledForCas_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\CertificateTransparencyEnforcementDisabledForCas"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!CertificateTransparencyEnforcementDisabledForLegacyCas_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!CertificateTransparencyEnforcementDisabledForLegacyCas_Explain

      PART !!CertificateTransparencyEnforcementDisabledForLegacyCas_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\CertificateTransparencyEnforcementDisabledForLegacyCas"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!CertificateTransparencyEnforcementDisabledForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!CertificateTransparencyEnforcementDisabledForUrls_Explain

      PART !!CertificateTransparencyEnforcementDisabledForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\CertificateTransparencyEnforcementDisabledForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!ClearBrowsingDataOnExit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!ClearBrowsingDataOnExit_Explain
      VALUENAME "ClearBrowsingDataOnExit"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ClearCachedImagesAndFilesOnExit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!ClearCachedImagesAndFilesOnExit_Explain
      VALUENAME "ClearCachedImagesAndFilesOnExit"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ClickOnceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!ClickOnceEnabled_Explain
      VALUENAME "ClickOnceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!CollectionsServicesAndExportsBlockList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!CollectionsServicesAndExportsBlockList_Explain

      PART !!CollectionsServicesAndExportsBlockList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\CollectionsServicesAndExportsBlockList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!CommandLineFlagSecurityWarningsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!CommandLineFlagSecurityWarningsEnabled_Explain
      VALUENAME "CommandLineFlagSecurityWarningsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ComponentUpdatesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ComponentUpdatesEnabled_Explain
      VALUENAME "ComponentUpdatesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ConfigureDoNotTrack_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ConfigureDoNotTrack_Explain
      VALUENAME "ConfigureDoNotTrack"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ConfigureFriendlyURLFormat_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!ConfigureFriendlyURLFormat_Explain

      PART !!ConfigureFriendlyURLFormat_Part  DROPDOWNLIST
        VALUENAME "ConfigureFriendlyURLFormat"
        ITEMLIST
          NAME !!ConfigureFriendlyURLFormat_PlainText_DropDown VALUE NUMERIC 1
          NAME !!ConfigureFriendlyURLFormat_TitledHyperlink_DropDown VALUE NUMERIC 3
          NAME !!ConfigureFriendlyURLFormat_WebPreview_DropDown VALUE NUMERIC 4
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ConfigureKeyboardShortcuts_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!ConfigureKeyboardShortcuts_Explain

      PART !!ConfigureKeyboardShortcuts_Part  EDITTEXT
        VALUENAME "ConfigureKeyboardShortcuts"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!ConfigureOnPremisesAccountAutoSignIn_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ConfigureOnPremisesAccountAutoSignIn_Explain

      PART !!ConfigureOnPremisesAccountAutoSignIn_Part  DROPDOWNLIST
        VALUENAME "ConfigureOnPremisesAccountAutoSignIn"
        ITEMLIST
          NAME !!ConfigureOnPremisesAccountAutoSignIn_Disabled_DropDown VALUE NUMERIC 0
          NAME !!ConfigureOnPremisesAccountAutoSignIn_SignInAndMakeDomainAccountNonRemovable_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ConfigureOnlineTextToSpeech_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ConfigureOnlineTextToSpeech_Explain
      VALUENAME "ConfigureOnlineTextToSpeech"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ConfigureShare_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!ConfigureShare_Explain

      PART !!ConfigureShare_Part  DROPDOWNLIST
        VALUENAME "ConfigureShare"
        ITEMLIST
          NAME !!ConfigureShare_ShareAllowed_DropDown VALUE NUMERIC 0
          NAME !!ConfigureShare_ShareDisallowed_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ConfigureViewInFileExplorer_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!ConfigureViewInFileExplorer_Explain

      PART !!ConfigureViewInFileExplorer_Part  EDITTEXT
        VALUENAME "ConfigureViewInFileExplorer"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!CrossOriginWebAssemblyModuleSharingEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V95_V98
      #endif
      EXPLAIN !!CrossOriginWebAssemblyModuleSharingEnabled_Explain
      VALUENAME "CrossOriginWebAssemblyModuleSharingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!CustomHelpLink_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!CustomHelpLink_Explain

      PART !!CustomHelpLink_Part  EDITTEXT
        VALUENAME "CustomHelpLink"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DNSInterceptionChecksEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!DNSInterceptionChecksEnabled_Explain
      VALUENAME "DNSInterceptionChecksEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DefaultBrowserSettingEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_ONLY_V77
      #endif
      EXPLAIN !!DefaultBrowserSettingEnabled_Explain
      VALUENAME "DefaultBrowserSettingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DefaultSearchProviderContextMenuAccessAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!DefaultSearchProviderContextMenuAccessAllowed_Explain
      VALUENAME "DefaultSearchProviderContextMenuAccessAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DefaultSensorsSetting_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!DefaultSensorsSetting_Explain

      PART !!DefaultSensorsSetting_Part  DROPDOWNLIST
        VALUENAME "DefaultSensorsSetting"
        ITEMLIST
          NAME !!DefaultSensorsSetting_AllowSensors_DropDown VALUE NUMERIC 1
          NAME !!DefaultSensorsSetting_BlockSensors_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DefaultSerialGuardSetting_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!DefaultSerialGuardSetting_Explain

      PART !!DefaultSerialGuardSetting_Part  DROPDOWNLIST
        VALUENAME "DefaultSerialGuardSetting"
        ITEMLIST
          NAME !!DefaultSerialGuardSetting_BlockSerial_DropDown VALUE NUMERIC 2
          NAME !!DefaultSerialGuardSetting_AskSerial_DropDown VALUE NUMERIC 3
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DefinePreferredLanguages_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!DefinePreferredLanguages_Explain

      PART !!DefinePreferredLanguages_Part  EDITTEXT
        VALUENAME "DefinePreferredLanguages"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DelayNavigationsForInitialSiteListDownload_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V84
      #endif
      EXPLAIN !!DelayNavigationsForInitialSiteListDownload_Explain

      PART !!DelayNavigationsForInitialSiteListDownload_Part  DROPDOWNLIST
        VALUENAME "DelayNavigationsForInitialSiteListDownload"
        ITEMLIST
          NAME !!DelayNavigationsForInitialSiteListDownload_None_DropDown VALUE NUMERIC 0
          NAME !!DelayNavigationsForInitialSiteListDownload_All_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DeleteDataOnMigration_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!DeleteDataOnMigration_Explain
      VALUENAME "DeleteDataOnMigration"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DeveloperToolsAvailability_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DeveloperToolsAvailability_Explain

      PART !!DeveloperToolsAvailability_Part  DROPDOWNLIST
        VALUENAME "DeveloperToolsAvailability"
        ITEMLIST
          NAME !!DeveloperToolsAvailability_DeveloperToolsDisallowedForForceInstalledExtensions_DropDown VALUE NUMERIC 0
          NAME !!DeveloperToolsAvailability_DeveloperToolsAllowed_DropDown VALUE NUMERIC 1
          NAME !!DeveloperToolsAvailability_DeveloperToolsDisallowed_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DiagnosticData_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_ONLY_V86
      #endif
      EXPLAIN !!DiagnosticData_Explain

      PART !!DiagnosticData_Part  DROPDOWNLIST
        VALUENAME "DiagnosticData"
        ITEMLIST
          NAME !!DiagnosticData_Off_DropDown VALUE NUMERIC 0
          NAME !!DiagnosticData_RequiredData_DropDown VALUE NUMERIC 1
          NAME !!DiagnosticData_OptionalData_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DirectInvokeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!DirectInvokeEnabled_Explain
      VALUENAME "DirectInvokeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!Disable3DAPIs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!Disable3DAPIs_Explain
      VALUENAME "Disable3DAPIs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DisableScreenshots_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DisableScreenshots_Explain
      VALUENAME "DisableScreenshots"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DiskCacheDir_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DiskCacheDir_Explain

      PART !!DiskCacheDir_Part  EDITTEXT
        VALUENAME "DiskCacheDir"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DiskCacheSize_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DiskCacheSize_Explain

      PART !!DiskCacheSize_Part  NUMERIC
        VALUENAME "DiskCacheSize"
        MIN 0 MAX 2000000000
      END PART
    END POLICY

    POLICY !!DisplayCapturePermissionsPolicyEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!DisplayCapturePermissionsPolicyEnabled_Explain
      VALUENAME "DisplayCapturePermissionsPolicyEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DnsOverHttpsMode_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!DnsOverHttpsMode_Explain

      PART !!DnsOverHttpsMode_Part  DROPDOWNLIST
        VALUENAME "DnsOverHttpsMode"
        ITEMLIST
          NAME !!DnsOverHttpsMode_off_DropDown VALUE "off"
          NAME !!DnsOverHttpsMode_automatic_DropDown VALUE "automatic"
          NAME !!DnsOverHttpsMode_secure_DropDown VALUE "secure"
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DnsOverHttpsTemplates_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!DnsOverHttpsTemplates_Explain

      PART !!DnsOverHttpsTemplates_Part  EDITTEXT
        VALUENAME "DnsOverHttpsTemplates"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DoNotSilentlyBlockProtocolsFromOrigins_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!DoNotSilentlyBlockProtocolsFromOrigins_Explain

      PART !!DoNotSilentlyBlockProtocolsFromOrigins_Part  EDITTEXT
        VALUENAME "DoNotSilentlyBlockProtocolsFromOrigins"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DownloadDirectory_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DownloadDirectory_Explain

      PART !!DownloadDirectory_Part  EDITTEXT
        VALUENAME "DownloadDirectory"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DownloadRestrictions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DownloadRestrictions_Explain

      PART !!DownloadRestrictions_Part  DROPDOWNLIST
        VALUENAME "DownloadRestrictions"
        ITEMLIST
          NAME !!DownloadRestrictions_DefaultDownloadSecurity_DropDown VALUE NUMERIC 0
          NAME !!DownloadRestrictions_BlockDangerousDownloads_DropDown VALUE NUMERIC 1
          NAME !!DownloadRestrictions_BlockPotentiallyDangerousDownloads_DropDown VALUE NUMERIC 2
          NAME !!DownloadRestrictions_BlockAllDownloads_DropDown VALUE NUMERIC 3
          NAME !!DownloadRestrictions_BlockMaliciousDownloads_DropDown VALUE NUMERIC 4
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!EdgeAssetDeliveryServiceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!EdgeAssetDeliveryServiceEnabled_Explain
      VALUENAME "EdgeAssetDeliveryServiceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeCollectionsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!EdgeCollectionsEnabled_Explain
      VALUENAME "EdgeCollectionsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeDiscoverEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!EdgeDiscoverEnabled_Explain
      VALUENAME "EdgeDiscoverEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeEnhanceImagesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!EdgeEnhanceImagesEnabled_Explain
      VALUENAME "EdgeEnhanceImagesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeFollowEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!EdgeFollowEnabled_Explain
      VALUENAME "EdgeFollowEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeShoppingAssistantEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!EdgeShoppingAssistantEnabled_Explain
      VALUENAME "EdgeShoppingAssistantEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EditFavoritesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!EditFavoritesEnabled_Explain
      VALUENAME "EditFavoritesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EnableDeprecatedWebPlatformFeatures_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V86
      #endif
      EXPLAIN !!EnableDeprecatedWebPlatformFeatures_Explain

      PART !!EnableDeprecatedWebPlatformFeatures_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\EnableDeprecatedWebPlatformFeatures"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!EnableDomainActionsDownload_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V84
      #endif
      EXPLAIN !!EnableDomainActionsDownload_Explain
      VALUENAME "EnableDomainActionsDownload"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EnableOnlineRevocationChecks_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!EnableOnlineRevocationChecks_Explain
      VALUENAME "EnableOnlineRevocationChecks"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EnableSha1ForLocalAnchors_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V85_V91
      #endif
      EXPLAIN !!EnableSha1ForLocalAnchors_Explain
      VALUENAME "EnableSha1ForLocalAnchors"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EnhanceSecurityMode_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!EnhanceSecurityMode_Explain

      PART !!EnhanceSecurityMode_Part  DROPDOWNLIST
        VALUENAME "EnhanceSecurityMode"
        ITEMLIST
          NAME !!EnhanceSecurityMode_StandardMode_DropDown VALUE NUMERIC 0
          NAME !!EnhanceSecurityMode_BalancedMode_DropDown VALUE NUMERIC 1
          NAME !!EnhanceSecurityMode_StrictMode_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!EnhanceSecurityModeBypassListDomains_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!EnhanceSecurityModeBypassListDomains_Explain

      PART !!EnhanceSecurityModeBypassListDomains_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\EnhanceSecurityModeBypassListDomains"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!EnhanceSecurityModeEnforceListDomains_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!EnhanceSecurityModeEnforceListDomains_Explain

      PART !!EnhanceSecurityModeEnforceListDomains_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\EnhanceSecurityModeEnforceListDomains"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!EnterpriseHardwarePlatformAPIEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!EnterpriseHardwarePlatformAPIEnabled_Explain
      VALUENAME "EnterpriseHardwarePlatformAPIEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EnterpriseModeSiteListManagerAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!EnterpriseModeSiteListManagerAllowed_Explain
      VALUENAME "EnterpriseModeSiteListManagerAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ExemptDomainFileTypePairsFromFileTypeDownloadWarnings_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!ExemptDomainFileTypePairsFromFileTypeDownloadWarnings_Explain

      PART !!ExemptDomainFileTypePairsFromFileTypeDownloadWarnings_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\ExemptDomainFileTypePairsFromFileTypeDownloadWarnings"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!ExperimentationAndConfigurationServiceControl_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ExperimentationAndConfigurationServiceControl_Explain

      PART !!ExperimentationAndConfigurationServiceControl_Part  DROPDOWNLIST
        VALUENAME "ExperimentationAndConfigurationServiceControl"
        ITEMLIST
          NAME !!ExperimentationAndConfigurationServiceControl_FullMode_DropDown VALUE NUMERIC 2
          NAME !!ExperimentationAndConfigurationServiceControl_ConfigurationsOnlyMode_DropDown VALUE NUMERIC 1
          NAME !!ExperimentationAndConfigurationServiceControl_RestrictedMode_DropDown VALUE NUMERIC 0
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ExplicitlyAllowedNetworkPorts_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V91
      #endif
      EXPLAIN !!ExplicitlyAllowedNetworkPorts_Explain

      PART !!ExplicitlyAllowedNetworkPorts_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\ExplicitlyAllowedNetworkPorts"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!ExternalProtocolDialogShowAlwaysOpenCheckbox_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!ExternalProtocolDialogShowAlwaysOpenCheckbox_Explain
      VALUENAME "ExternalProtocolDialogShowAlwaysOpenCheckbox"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!FamilySafetySettingsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!FamilySafetySettingsEnabled_Explain
      VALUENAME "FamilySafetySettingsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!FetchKeepaliveDurationSecondsOnShutdown_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V90
      #endif
      EXPLAIN !!FetchKeepaliveDurationSecondsOnShutdown_Explain

      PART !!FetchKeepaliveDurationSecondsOnShutdown_Part  NUMERIC
        VALUENAME "FetchKeepaliveDurationSecondsOnShutdown"
        MIN 0 MAX 5
      END PART
    END POLICY

    POLICY !!ForceBingSafeSearch_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ForceBingSafeSearch_Explain

      PART !!ForceBingSafeSearch_Part  DROPDOWNLIST
        VALUENAME "ForceBingSafeSearch"
        ITEMLIST
          NAME !!ForceBingSafeSearch_BingSafeSearchNoRestrictionsMode_DropDown VALUE NUMERIC 0
          NAME !!ForceBingSafeSearch_BingSafeSearchModerateMode_DropDown VALUE NUMERIC 1
          NAME !!ForceBingSafeSearch_BingSafeSearchStrictMode_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ForceCertificatePromptsOnMultipleMatches_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ForceCertificatePromptsOnMultipleMatches_Explain
      VALUENAME "ForceCertificatePromptsOnMultipleMatches"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceEphemeralProfiles_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ForceEphemeralProfiles_Explain
      VALUENAME "ForceEphemeralProfiles"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceGoogleSafeSearch_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ForceGoogleSafeSearch_Explain
      VALUENAME "ForceGoogleSafeSearch"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceLegacyDefaultReferrerPolicy_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V81_V88
      #endif
      EXPLAIN !!ForceLegacyDefaultReferrerPolicy_Explain
      VALUENAME "ForceLegacyDefaultReferrerPolicy"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceMajorVersionToMinorPositionInUserAgent_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!ForceMajorVersionToMinorPositionInUserAgent_Explain

      PART !!ForceMajorVersionToMinorPositionInUserAgent_Part  DROPDOWNLIST
        VALUENAME "ForceMajorVersionToMinorPositionInUserAgent"
        ITEMLIST
          NAME !!ForceMajorVersionToMinorPositionInUserAgent_Default_DropDown VALUE NUMERIC 0
          NAME !!ForceMajorVersionToMinorPositionInUserAgent_ForceDisabled_DropDown VALUE NUMERIC 1
          NAME !!ForceMajorVersionToMinorPositionInUserAgent_ForceEnabled_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ForceNetworkInProcess_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V78_V83
      #endif
      EXPLAIN !!ForceNetworkInProcess_Explain
      VALUENAME "ForceNetworkInProcess"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceSync_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!ForceSync_Explain
      VALUENAME "ForceSync"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceSyncTypes_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!ForceSyncTypes_Explain

      PART !!ForceSyncTypes_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\ForceSyncTypes"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!ForceYouTubeRestrict_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ForceYouTubeRestrict_Explain

      PART !!ForceYouTubeRestrict_Part  DROPDOWNLIST
        VALUENAME "ForceYouTubeRestrict"
        ITEMLIST
          NAME !!ForceYouTubeRestrict_Off_DropDown VALUE NUMERIC 0
          NAME !!ForceYouTubeRestrict_Moderate_DropDown VALUE NUMERIC 1
          NAME !!ForceYouTubeRestrict_Strict_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!FullscreenAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!FullscreenAllowed_Explain
      VALUENAME "FullscreenAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!GloballyScopeHTTPAuthCacheEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!GloballyScopeHTTPAuthCacheEnabled_Explain
      VALUENAME "GloballyScopeHTTPAuthCacheEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!GoToIntranetSiteForSingleWordEntryInAddressBar_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!GoToIntranetSiteForSingleWordEntryInAddressBar_Explain
      VALUENAME "GoToIntranetSiteForSingleWordEntryInAddressBar"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HSTSPolicyBypassList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!HSTSPolicyBypassList_Explain

      PART !!HSTSPolicyBypassList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\HSTSPolicyBypassList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!HardwareAccelerationModeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!HardwareAccelerationModeEnabled_Explain
      VALUENAME "HardwareAccelerationModeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HeadlessModeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!HeadlessModeEnabled_Explain
      VALUENAME "HeadlessModeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HideFirstRunExperience_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!HideFirstRunExperience_Explain
      VALUENAME "HideFirstRunExperience"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HideInternetExplorerRedirectUXForIncompatibleSitesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!HideInternetExplorerRedirectUXForIncompatibleSitesEnabled_Explain
      VALUENAME "HideInternetExplorerRedirectUXForIncompatibleSitesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HideRestoreDialogEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V100
      #endif
      EXPLAIN !!HideRestoreDialogEnabled_Explain
      VALUENAME "HideRestoreDialogEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HubsSidebarEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!HubsSidebarEnabled_Explain
      VALUENAME "HubsSidebarEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportAutofillFormData_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportAutofillFormData_Explain
      VALUENAME "ImportAutofillFormData"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportFavorites_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportFavorites_Explain
      VALUENAME "ImportFavorites"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportBrowserSettings_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!ImportBrowserSettings_Explain
      VALUENAME "ImportBrowserSettings"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportCookies_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportCookies_Explain
      VALUENAME "ImportCookies"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportExtensions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportExtensions_Explain
      VALUENAME "ImportExtensions"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportHistory_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportHistory_Explain
      VALUENAME "ImportHistory"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportHomepage_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportHomepage_Explain
      VALUENAME "ImportHomepage"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportOpenTabs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!ImportOpenTabs_Explain
      VALUENAME "ImportOpenTabs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportPaymentInfo_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportPaymentInfo_Explain
      VALUENAME "ImportPaymentInfo"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportSavedPasswords_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportSavedPasswords_Explain
      VALUENAME "ImportSavedPasswords"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportSearchEngine_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportSearchEngine_Explain
      VALUENAME "ImportSearchEngine"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportShortcuts_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportShortcuts_Explain
      VALUENAME "ImportShortcuts"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportStartupPageSettings_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V91
      #endif
      EXPLAIN !!ImportStartupPageSettings_Explain
      VALUENAME "ImportStartupPageSettings"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InAppSupportEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!InAppSupportEnabled_Explain
      VALUENAME "InAppSupportEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InPrivateModeAvailability_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!InPrivateModeAvailability_Explain

      PART !!InPrivateModeAvailability_Part  DROPDOWNLIST
        VALUENAME "InPrivateModeAvailability"
        ITEMLIST
          NAME !!IncognitoModeAvailability_Enabled_DropDown VALUE NUMERIC 0
          NAME !!IncognitoModeAvailability_Disabled_DropDown VALUE NUMERIC 1
          NAME !!IncognitoModeAvailability_Forced_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!InsecureFormsWarningsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!InsecureFormsWarningsEnabled_Explain
      VALUENAME "InsecureFormsWarningsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!IntensiveWakeUpThrottlingEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!IntensiveWakeUpThrottlingEnabled_Explain
      VALUENAME "IntensiveWakeUpThrottlingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationCloudNeutralSitesReporting_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!InternetExplorerIntegrationCloudNeutralSitesReporting_Explain

      PART !!InternetExplorerIntegrationCloudNeutralSitesReporting_Part  EDITTEXT
        VALUENAME "InternetExplorerIntegrationCloudNeutralSitesReporting"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationCloudSiteList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!InternetExplorerIntegrationCloudSiteList_Explain

      PART !!InternetExplorerIntegrationCloudSiteList_Part  EDITTEXT
        VALUENAME "InternetExplorerIntegrationCloudSiteList"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationCloudUserSitesReporting_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!InternetExplorerIntegrationCloudUserSitesReporting_Explain

      PART !!InternetExplorerIntegrationCloudUserSitesReporting_Part  EDITTEXT
        VALUENAME "InternetExplorerIntegrationCloudUserSitesReporting"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationComplexNavDataTypes_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!InternetExplorerIntegrationComplexNavDataTypes_Explain

      PART !!InternetExplorerIntegrationComplexNavDataTypes_Part  DROPDOWNLIST
        VALUENAME "InternetExplorerIntegrationComplexNavDataTypes"
        ITEMLIST
          NAME !!InternetExplorerIntegrationComplexNavDataTypes_IncludeNone_DropDown VALUE NUMERIC 0
          NAME !!InternetExplorerIntegrationComplexNavDataTypes_IncludeFormDataOnly_DropDown VALUE NUMERIC 1
          NAME !!InternetExplorerIntegrationComplexNavDataTypes_IncludeHeadersOnly_DropDown VALUE NUMERIC 2
          NAME !!InternetExplorerIntegrationComplexNavDataTypes_IncludeFormDataAndHeaders_DropDown VALUE NUMERIC 3
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationEnhancedHangDetection_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V84
      #endif
      EXPLAIN !!InternetExplorerIntegrationEnhancedHangDetection_Explain

      PART !!InternetExplorerIntegrationEnhancedHangDetection_Part  DROPDOWNLIST
        VALUENAME "InternetExplorerIntegrationEnhancedHangDetection"
        ITEMLIST
          NAME !!InternetExplorerIntegrationEnhancedHangDetection_Disabled_DropDown VALUE NUMERIC 0
          NAME !!InternetExplorerIntegrationEnhancedHangDetection_Enabled_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationLevel_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!InternetExplorerIntegrationLevel_Explain

      PART !!InternetExplorerIntegrationLevel_Part  DROPDOWNLIST
        VALUENAME "InternetExplorerIntegrationLevel"
        ITEMLIST
          NAME !!InternetExplorerIntegrationLevel_None_DropDown VALUE NUMERIC 0
          NAME !!InternetExplorerIntegrationLevel_IEMode_DropDown VALUE NUMERIC 1
          NAME !!InternetExplorerIntegrationLevel_NeedIE_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationLocalFileAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!InternetExplorerIntegrationLocalFileAllowed_Explain
      VALUENAME "InternetExplorerIntegrationLocalFileAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationLocalFileExtensionAllowList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!InternetExplorerIntegrationLocalFileExtensionAllowList_Explain

      PART !!InternetExplorerIntegrationLocalFileExtensionAllowList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\InternetExplorerIntegrationLocalFileExtensionAllowList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationLocalFileShowContextMenu_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!InternetExplorerIntegrationLocalFileShowContextMenu_Explain
      VALUENAME "InternetExplorerIntegrationLocalFileShowContextMenu"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationLocalSiteListExpirationDays_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!InternetExplorerIntegrationLocalSiteListExpirationDays_Explain

      PART !!InternetExplorerIntegrationLocalSiteListExpirationDays_Part  NUMERIC
        VALUENAME "InternetExplorerIntegrationLocalSiteListExpirationDays"
        MIN 0 MAX 90
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationReloadInIEModeAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!InternetExplorerIntegrationReloadInIEModeAllowed_Explain
      VALUENAME "InternetExplorerIntegrationReloadInIEModeAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationSiteList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!InternetExplorerIntegrationSiteList_Explain

      PART !!InternetExplorerIntegrationSiteList_Part  EDITTEXT
        VALUENAME "InternetExplorerIntegrationSiteList"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationSiteListRefreshInterval_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!InternetExplorerIntegrationSiteListRefreshInterval_Explain

      PART !!InternetExplorerIntegrationSiteListRefreshInterval_Part  NUMERIC
        VALUENAME "InternetExplorerIntegrationSiteListRefreshInterval"
        MIN 30 MAX 2000000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationSiteRedirect_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!InternetExplorerIntegrationSiteRedirect_Explain

      PART !!InternetExplorerIntegrationSiteRedirect_Part  DROPDOWNLIST
        VALUENAME "InternetExplorerIntegrationSiteRedirect"
        ITEMLIST
          NAME !!InternetExplorerIntegrationSiteRedirect_Default_DropDown VALUE NUMERIC 0
          NAME !!InternetExplorerIntegrationSiteRedirect_AutomaticNavigationsOnly_DropDown VALUE NUMERIC 1
          NAME !!InternetExplorerIntegrationSiteRedirect_AllInPageNavigations_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationTestingAllowed_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V86_V94
      #endif
      EXPLAIN !!InternetExplorerIntegrationTestingAllowed_Explain
      VALUENAME "InternetExplorerIntegrationTestingAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationWindowOpenHeightAdjustment_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!InternetExplorerIntegrationWindowOpenHeightAdjustment_Explain

      PART !!InternetExplorerIntegrationWindowOpenHeightAdjustment_Part  NUMERIC
        VALUENAME "InternetExplorerIntegrationWindowOpenHeightAdjustment"
        MIN 0 MAX 2000000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationWindowOpenWidthAdjustment_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!InternetExplorerIntegrationWindowOpenWidthAdjustment_Explain

      PART !!InternetExplorerIntegrationWindowOpenWidthAdjustment_Part  NUMERIC
        VALUENAME "InternetExplorerIntegrationWindowOpenWidthAdjustment"
        MIN 0 MAX 2000000000
      END PART
    END POLICY

    POLICY !!InternetExplorerModeEnableSavePageAs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!InternetExplorerModeEnableSavePageAs_Explain
      VALUENAME "InternetExplorerModeEnableSavePageAs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerModeTabInEdgeModeAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!InternetExplorerModeTabInEdgeModeAllowed_Explain
      VALUENAME "InternetExplorerModeTabInEdgeModeAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerModeToolbarButtonEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!InternetExplorerModeToolbarButtonEnabled_Explain
      VALUENAME "InternetExplorerModeToolbarButtonEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!IntranetRedirectBehavior_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!IntranetRedirectBehavior_Explain

      PART !!IntranetRedirectBehavior_Part  DROPDOWNLIST
        VALUENAME "IntranetRedirectBehavior"
        ITEMLIST
          NAME !!IntranetRedirectBehavior_Default_DropDown VALUE NUMERIC 0
          NAME !!IntranetRedirectBehavior_DisableInterceptionChecksDisableInfobar_DropDown VALUE NUMERIC 1
          NAME !!IntranetRedirectBehavior_DisableInterceptionChecksEnableInfobar_DropDown VALUE NUMERIC 2
          NAME !!IntranetRedirectBehavior_EnableInterceptionChecksEnableInfobar_DropDown VALUE NUMERIC 3
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!IsolateOrigins_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!IsolateOrigins_Explain

      PART !!IsolateOrigins_Part  EDITTEXT
        VALUENAME "IsolateOrigins"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!LocalBrowserDataShareEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!LocalBrowserDataShareEnabled_Explain
      VALUENAME "LocalBrowserDataShareEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!LocalProvidersEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!LocalProvidersEnabled_Explain
      VALUENAME "LocalProvidersEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MSAWebSiteSSOUsingThisProfileAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!MSAWebSiteSSOUsingThisProfileAllowed_Explain
      VALUENAME "MSAWebSiteSSOUsingThisProfileAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ManagedFavorites_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ManagedFavorites_Explain

      PART !!ManagedFavorites_Part  EDITTEXT
        VALUENAME "ManagedFavorites"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!ManagedConfigurationPerOrigin_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V90
      #endif
      EXPLAIN !!ManagedConfigurationPerOrigin_Explain

      PART !!ManagedConfigurationPerOrigin_Part  EDITTEXT
        VALUENAME "ManagedConfigurationPerOrigin"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!ManagedSearchEngines_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ManagedSearchEngines_Explain

      PART !!ManagedSearchEngines_Part  EDITTEXT
        VALUENAME "ManagedSearchEngines"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!MathSolverEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V91
      #endif
      EXPLAIN !!MathSolverEnabled_Explain
      VALUENAME "MathSolverEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MaxConnectionsPerProxy_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!MaxConnectionsPerProxy_Explain

      PART !!MaxConnectionsPerProxy_Part  NUMERIC
        VALUENAME "MaxConnectionsPerProxy"
        MIN 0 MAX 2000000000
      END PART
    END POLICY

    POLICY !!MediaRouterCastAllowAllIPs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!MediaRouterCastAllowAllIPs_Explain
      VALUENAME "MediaRouterCastAllowAllIPs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MetricsReportingEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V88
      #endif
      EXPLAIN !!MetricsReportingEnabled_Explain
      VALUENAME "MetricsReportingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MicrosoftEdgeInsiderPromotionEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!MicrosoftEdgeInsiderPromotionEnabled_Explain
      VALUENAME "MicrosoftEdgeInsiderPromotionEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MicrosoftOfficeMenuEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V100
      #endif
      EXPLAIN !!MicrosoftOfficeMenuEnabled_Explain
      VALUENAME "MicrosoftOfficeMenuEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!NativeWindowOcclusionEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V84
      #endif
      EXPLAIN !!NativeWindowOcclusionEnabled_Explain
      VALUENAME "NativeWindowOcclusionEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!NavigationDelayForInitialSiteListDownloadTimeout_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V84
      #endif
      EXPLAIN !!NavigationDelayForInitialSiteListDownloadTimeout_Explain

      PART !!NavigationDelayForInitialSiteListDownloadTimeout_Part  NUMERIC
        VALUENAME "NavigationDelayForInitialSiteListDownloadTimeout"
        MIN 0 MAX 2000000000
      END PART
    END POLICY

    POLICY !!NetworkPredictionOptions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!NetworkPredictionOptions_Explain

      PART !!NetworkPredictionOptions_Part  DROPDOWNLIST
        VALUENAME "NetworkPredictionOptions"
        ITEMLIST
          NAME !!NetworkPredictionOptions_NetworkPredictionAlways_DropDown VALUE NUMERIC 0
          NAME !!NetworkPredictionOptions_NetworkPredictionWifiOnly_DropDown VALUE NUMERIC 1
          NAME !!NetworkPredictionOptions_NetworkPredictionNever_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!NonRemovableProfileEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!NonRemovableProfileEnabled_Explain
      VALUENAME "NonRemovableProfileEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!OverrideSecurityRestrictionsOnInsecureOrigin_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!OverrideSecurityRestrictionsOnInsecureOrigin_Explain

      PART !!OverrideSecurityRestrictionsOnInsecureOrigin_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\OverrideSecurityRestrictionsOnInsecureOrigin"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!PDFSecureMode_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V100
      #endif
      EXPLAIN !!PDFSecureMode_Explain
      VALUENAME "PDFSecureMode"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!PaymentMethodQueryEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!PaymentMethodQueryEnabled_Explain
      VALUENAME "PaymentMethodQueryEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!PersonalizationReportingEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!PersonalizationReportingEnabled_Explain
      VALUENAME "PersonalizationReportingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!PinningWizardAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!PinningWizardAllowed_Explain
      VALUENAME "PinningWizardAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ProactiveAuthEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V90
      #endif
      EXPLAIN !!ProactiveAuthEnabled_Explain
      VALUENAME "ProactiveAuthEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!PromotionalTabsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!PromotionalTabsEnabled_Explain
      VALUENAME "PromotionalTabsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!PromptForDownloadLocation_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!PromptForDownloadLocation_Explain
      VALUENAME "PromptForDownloadLocation"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!QuicAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!QuicAllowed_Explain
      VALUENAME "QuicAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!QuickViewOfficeFilesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V90
      #endif
      EXPLAIN !!QuickViewOfficeFilesEnabled_Explain
      VALUENAME "QuickViewOfficeFilesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RedirectSitesFromInternetExplorerPreventBHOInstall_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!RedirectSitesFromInternetExplorerPreventBHOInstall_Explain
      VALUENAME "RedirectSitesFromInternetExplorerPreventBHOInstall"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RedirectSitesFromInternetExplorerRedirectMode_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!RedirectSitesFromInternetExplorerRedirectMode_Explain

      PART !!RedirectSitesFromInternetExplorerRedirectMode_Part  DROPDOWNLIST
        VALUENAME "RedirectSitesFromInternetExplorerRedirectMode"
        ITEMLIST
          NAME !!RedirectSitesFromInternetExplorerRedirectMode_Disable_DropDown VALUE NUMERIC 0
          NAME !!RedirectSitesFromInternetExplorerRedirectMode_Sitelist_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!RelatedMatchesCloudServiceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!RelatedMatchesCloudServiceEnabled_Explain
      VALUENAME "RelatedMatchesCloudServiceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RelaunchNotification_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!RelaunchNotification_Explain

      PART !!RelaunchNotification_Part  DROPDOWNLIST
        VALUENAME "RelaunchNotification"
        ITEMLIST
          NAME !!RelaunchNotification_Recommended_DropDown VALUE NUMERIC 1
          NAME !!RelaunchNotification_Required_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!RelaunchNotificationPeriod_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!RelaunchNotificationPeriod_Explain

      PART !!RelaunchNotificationPeriod_Part  NUMERIC
        VALUENAME "RelaunchNotificationPeriod"
        MIN 3600000 MAX 2000000000
      END PART
    END POLICY

    POLICY !!RelaunchWindow_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!RelaunchWindow_Explain

      PART !!RelaunchWindow_Part  EDITTEXT
        VALUENAME "RelaunchWindow"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!RemoteDebuggingAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!RemoteDebuggingAllowed_Explain
      VALUENAME "RemoteDebuggingAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RendererAppContainerEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!RendererAppContainerEnabled_Explain
      VALUENAME "RendererAppContainerEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RendererCodeIntegrityEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!RendererCodeIntegrityEnabled_Explain
      VALUENAME "RendererCodeIntegrityEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RequireOnlineRevocationChecksForLocalAnchors_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!RequireOnlineRevocationChecksForLocalAnchors_Explain
      VALUENAME "RequireOnlineRevocationChecksForLocalAnchors"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ResolveNavigationErrorsUseWebService_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ResolveNavigationErrorsUseWebService_Explain
      VALUENAME "ResolveNavigationErrorsUseWebService"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RestrictSigninToPattern_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!RestrictSigninToPattern_Explain

      PART !!RestrictSigninToPattern_Part  EDITTEXT
        VALUENAME "RestrictSigninToPattern"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!RoamingProfileLocation_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!RoamingProfileLocation_Explain

      PART !!RoamingProfileLocation_Part  EDITTEXT
        VALUENAME "RoamingProfileLocation"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!RoamingProfileSupportEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!RoamingProfileSupportEnabled_Explain
      VALUENAME "RoamingProfileSupportEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RunAllFlashInAllowMode_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V88
      #endif
      EXPLAIN !!RunAllFlashInAllowMode_Explain
      VALUENAME "RunAllFlashInAllowMode"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SSLErrorOverrideAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SSLErrorOverrideAllowed_Explain
      VALUENAME "SSLErrorOverrideAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SSLErrorOverrideAllowedForOrigins_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V90
      #endif
      EXPLAIN !!SSLErrorOverrideAllowedForOrigins_Explain

      PART !!SSLErrorOverrideAllowedForOrigins_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SSLErrorOverrideAllowedForOrigins"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SSLVersionMin_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SSLVersionMin_Explain

      PART !!SSLVersionMin_Part  DROPDOWNLIST
        VALUENAME "SSLVersionMin"
        ITEMLIST
          NAME !!SSLVersionMin_TLSv1_DropDown VALUE "tls1"
          NAME !!SSLVersionMin_TLSv1_1_DropDown VALUE "tls1.1"
          NAME !!SSLVersionMin_TLSv1_2_DropDown VALUE "tls1.2"
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!SandboxExternalProtocolBlocked_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!SandboxExternalProtocolBlocked_Explain
      VALUENAME "SandboxExternalProtocolBlocked"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SaveCookiesOnExit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!SaveCookiesOnExit_Explain

      PART !!SaveCookiesOnExit_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SaveCookiesOnExit"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SavingBrowserHistoryDisabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SavingBrowserHistoryDisabled_Explain
      VALUENAME "SavingBrowserHistoryDisabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ScreenCaptureAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!ScreenCaptureAllowed_Explain
      VALUENAME "ScreenCaptureAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ScrollToTextFragmentEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!ScrollToTextFragmentEnabled_Explain
      VALUENAME "ScrollToTextFragmentEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SearchSuggestEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SearchSuggestEnabled_Explain
      VALUENAME "SearchSuggestEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SecurityKeyPermitAttestation_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SecurityKeyPermitAttestation_Explain

      PART !!SecurityKeyPermitAttestation_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SecurityKeyPermitAttestation"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SendIntranetToInternetExplorer_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SendIntranetToInternetExplorer_Explain
      VALUENAME "SendIntranetToInternetExplorer"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SendSiteInfoToImproveServices_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V88
      #endif
      EXPLAIN !!SendSiteInfoToImproveServices_Explain
      VALUENAME "SendSiteInfoToImproveServices"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SensorsAllowedForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!SensorsAllowedForUrls_Explain

      PART !!SensorsAllowedForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SensorsAllowedForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SensorsBlockedForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!SensorsBlockedForUrls_Explain

      PART !!SensorsBlockedForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SensorsBlockedForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SerialAskForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!SerialAskForUrls_Explain

      PART !!SerialAskForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SerialAskForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SerialBlockedForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!SerialBlockedForUrls_Explain

      PART !!SerialBlockedForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SerialBlockedForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SetTimeoutWithout1MsClampEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!SetTimeoutWithout1MsClampEnabled_Explain
      VALUENAME "SetTimeoutWithout1MsClampEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ShadowStackCrashRollbackBehavior_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!ShadowStackCrashRollbackBehavior_Explain

      PART !!ShadowStackCrashRollbackBehavior_Part  DROPDOWNLIST
        VALUENAME "ShadowStackCrashRollbackBehavior"
        ITEMLIST
          NAME !!ShadowStackCrashRollbackBehavior_Disable_DropDown VALUE NUMERIC 0
          NAME !!ShadowStackCrashRollbackBehavior_DisableUntilUpdate_DropDown VALUE NUMERIC 1
          NAME !!ShadowStackCrashRollbackBehavior_Enable_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!SharedArrayBufferUnrestrictedAccessAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!SharedArrayBufferUnrestrictedAccessAllowed_Explain
      VALUENAME "SharedArrayBufferUnrestrictedAccessAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SharedLinksEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!SharedLinksEnabled_Explain
      VALUENAME "SharedLinksEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ShowMicrosoftRewards_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!ShowMicrosoftRewards_Explain
      VALUENAME "ShowMicrosoftRewards"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ShowOfficeShortcutInFavoritesBar_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ShowOfficeShortcutInFavoritesBar_Explain
      VALUENAME "ShowOfficeShortcutInFavoritesBar"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ShowRecommendationsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!ShowRecommendationsEnabled_Explain
      VALUENAME "ShowRecommendationsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SignedHTTPExchangeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!SignedHTTPExchangeEnabled_Explain
      VALUENAME "SignedHTTPExchangeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SitePerProcess_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SitePerProcess_Explain
      VALUENAME "SitePerProcess"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SiteSafetyServicesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!SiteSafetyServicesEnabled_Explain
      VALUENAME "SiteSafetyServicesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SmartActionsBlockList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!SmartActionsBlockList_Explain

      PART !!SmartActionsBlockList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SmartActionsBlockList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SpeechRecognitionEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!SpeechRecognitionEnabled_Explain
      VALUENAME "SpeechRecognitionEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SpellcheckEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SpellcheckEnabled_Explain
      VALUENAME "SpellcheckEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SpellcheckLanguage_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SpellcheckLanguage_Explain

      PART !!SpellcheckLanguage_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SpellcheckLanguage"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SpellcheckLanguageBlocklist_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!SpellcheckLanguageBlocklist_Explain

      PART !!SpellcheckLanguageBlocklist_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SpellcheckLanguageBlocklist"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!StricterMixedContentTreatmentEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V81_V84
      #endif
      EXPLAIN !!StricterMixedContentTreatmentEnabled_Explain
      VALUENAME "StricterMixedContentTreatmentEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SuppressUnsupportedOSWarning_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SuppressUnsupportedOSWarning_Explain
      VALUENAME "SuppressUnsupportedOSWarning"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SyncDisabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SyncDisabled_Explain
      VALUENAME "SyncDisabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SyncTypesListDisabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!SyncTypesListDisabled_Explain

      PART !!SyncTypesListDisabled_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SyncTypesListDisabled"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!TLS13HardeningForLocalAnchorsEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V81_V85
      #endif
      EXPLAIN !!TLS13HardeningForLocalAnchorsEnabled_Explain
      VALUENAME "TLS13HardeningForLocalAnchorsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TLSCipherSuiteDenyList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!TLSCipherSuiteDenyList_Explain

      PART !!TLSCipherSuiteDenyList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\TLSCipherSuiteDenyList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!TabFreezingEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V79_V86
      #endif
      EXPLAIN !!TabFreezingEnabled_Explain
      VALUENAME "TabFreezingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TargetBlankImpliesNoOpener_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!TargetBlankImpliesNoOpener_Explain
      VALUENAME "TargetBlankImpliesNoOpener"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TaskManagerEndProcessEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!TaskManagerEndProcessEnabled_Explain
      VALUENAME "TaskManagerEndProcessEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TotalMemoryLimitMb_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!TotalMemoryLimitMb_Explain

      PART !!TotalMemoryLimitMb_Part  NUMERIC
        VALUENAME "TotalMemoryLimitMb"
        MIN 1024 MAX 2000000000
      END PART
    END POLICY

    POLICY !!TrackingPrevention_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!TrackingPrevention_Explain

      PART !!TrackingPrevention_Part  DROPDOWNLIST
        VALUENAME "TrackingPrevention"
        ITEMLIST
          NAME !!TrackingPrevention_TrackingPreventionOff_DropDown VALUE NUMERIC 0
          NAME !!TrackingPrevention_TrackingPreventionBasic_DropDown VALUE NUMERIC 1
          NAME !!TrackingPrevention_TrackingPreventionBalanced_DropDown VALUE NUMERIC 2
          NAME !!TrackingPrevention_TrackingPreventionStrict_DropDown VALUE NUMERIC 3
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!TranslateEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!TranslateEnabled_Explain
      VALUENAME "TranslateEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TravelAssistanceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!TravelAssistanceEnabled_Explain
      VALUENAME "TravelAssistanceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TripleDESEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!TripleDESEnabled_Explain
      VALUENAME "TripleDESEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!U2fSecurityKeyApiEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!U2fSecurityKeyApiEnabled_Explain
      VALUENAME "U2fSecurityKeyApiEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!URLAllowlist_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!URLAllowlist_Explain

      PART !!URLAllowlist_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\URLAllowlist"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!URLBlocklist_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!URLBlocklist_Explain

      PART !!URLBlocklist_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\URLBlocklist"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!UserAgentClientHintsEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V86_V93
      #endif
      EXPLAIN !!UserAgentClientHintsEnabled_Explain
      VALUENAME "UserAgentClientHintsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!UserAgentReduction_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!UserAgentReduction_Explain

      PART !!UserAgentReduction_Part  DROPDOWNLIST
        VALUENAME "UserAgentReduction"
        ITEMLIST
          NAME !!UserAgentReduction_Default_DropDown VALUE NUMERIC 0
          NAME !!UserAgentReduction_ForceDisabled_DropDown VALUE NUMERIC 1
          NAME !!UserAgentReduction_ForceEnabled_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!UserDataDir_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!UserDataDir_Explain

      PART !!UserDataDir_Part  EDITTEXT
        VALUENAME "UserDataDir"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!UserDataSnapshotRetentionLimit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!UserDataSnapshotRetentionLimit_Explain

      PART !!UserDataSnapshotRetentionLimit_Part  NUMERIC
        VALUENAME "UserDataSnapshotRetentionLimit"
        MIN 0 MAX 5
      END PART
    END POLICY

    POLICY !!UserFeedbackAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!UserFeedbackAllowed_Explain
      VALUENAME "UserFeedbackAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!VerticalTabsAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!VerticalTabsAllowed_Explain
      VALUENAME "VerticalTabsAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!VideoCaptureAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!VideoCaptureAllowed_Explain
      VALUENAME "VideoCaptureAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!VideoCaptureAllowedUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!VideoCaptureAllowedUrls_Explain

      PART !!VideoCaptureAllowedUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\VideoCaptureAllowedUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!VisualSearchEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!VisualSearchEnabled_Explain
      VALUENAME "VisualSearchEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WPADQuickCheckEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!WPADQuickCheckEnabled_Explain
      VALUENAME "WPADQuickCheckEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebAppInstallForceList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!WebAppInstallForceList_Explain

      PART !!WebAppInstallForceList_Part  EDITTEXT
        VALUENAME "WebAppInstallForceList"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!WebCaptureEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!WebCaptureEnabled_Explain
      VALUENAME "WebCaptureEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebComponentsV0Enabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V80_V84
      #endif
      EXPLAIN !!WebComponentsV0Enabled_Explain
      VALUENAME "WebComponentsV0Enabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebDriverOverridesIncompatiblePolicies_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V84
      #endif
      EXPLAIN !!WebDriverOverridesIncompatiblePolicies_Explain
      VALUENAME "WebDriverOverridesIncompatiblePolicies"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebRtcAllowLegacyTLSProtocols_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!WebRtcAllowLegacyTLSProtocols_Explain
      VALUENAME "WebRtcAllowLegacyTLSProtocols"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebRtcLocalIpsAllowedUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!WebRtcLocalIpsAllowedUrls_Explain

      PART !!WebRtcLocalIpsAllowedUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\WebRtcLocalIpsAllowedUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!WebRtcLocalhostIpHandling_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!WebRtcLocalhostIpHandling_Explain

      PART !!WebRtcLocalhostIpHandling_Part  DROPDOWNLIST
        VALUENAME "WebRtcLocalhostIpHandling"
        ITEMLIST
          NAME !!WebRtcLocalhostIpHandling_AllowAllInterfaces_DropDown VALUE "default"
          NAME !!WebRtcLocalhostIpHandling_AllowPublicAndPrivateInterfaces_DropDown VALUE "default_public_and_private_interfaces"
          NAME !!WebRtcLocalhostIpHandling_AllowPublicInterfaceOnly_DropDown VALUE "default_public_interface_only"
          NAME !!WebRtcLocalhostIpHandling_DisableNonProxiedUdp_DropDown VALUE "disable_non_proxied_udp"
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!WebRtcRespectOsRoutingTableEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V94
      #endif
      EXPLAIN !!WebRtcRespectOsRoutingTableEnabled_Explain
      VALUENAME "WebRtcRespectOsRoutingTableEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebRtcUdpPortRange_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!WebRtcUdpPortRange_Explain

      PART !!WebRtcUdpPortRange_Part  EDITTEXT
        VALUENAME "WebRtcUdpPortRange"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!WebSQLInThirdPartyContextEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V97_V100
      #endif
      EXPLAIN !!WebSQLInThirdPartyContextEnabled_Explain
      VALUENAME "WebSQLInThirdPartyContextEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebWidgetAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!WebWidgetAllowed_Explain
      VALUENAME "WebWidgetAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebWidgetIsEnabledOnStartup_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!WebWidgetIsEnabledOnStartup_Explain
      VALUENAME "WebWidgetIsEnabledOnStartup"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WinHttpProxyResolverEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V84
      #endif
      EXPLAIN !!WinHttpProxyResolverEnabled_Explain
      VALUENAME "WinHttpProxyResolverEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WindowOcclusionEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!WindowOcclusionEnabled_Explain
      VALUENAME "WindowOcclusionEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

  END CATEGORY

  CATEGORY !!microsoft_edge_recommended
    KEYNAME "Software\Policies\Microsoft\Edge\Recommended"

    CATEGORY !!HTTPAuthentication_Category
      POLICY !!WindowsHelloForHTTPAuthEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V90
        #endif
        EXPLAIN !!WindowsHelloForHTTPAuthEnabled_Explain
        VALUENAME "WindowsHelloForHTTPAuthEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Identity_Category
      POLICY !!SignInCtaOnNtpEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V99
        #endif
        EXPLAIN !!SignInCtaOnNtpEnabled_Explain
        VALUENAME "SignInCtaOnNtpEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!ContentSettings_Category
      POLICY !!RegisteredProtocolHandlers_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!RegisteredProtocolHandlers_Explain

        PART !!RegisteredProtocolHandlers_Part  EDITTEXT
          VALUENAME "RegisteredProtocolHandlers"
          MAXLEN 1000000
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!PasswordManager_Category
      POLICY !!PasswordManagerEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PasswordManagerEnabled_Explain
        VALUENAME "PasswordManagerEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PasswordRevealEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V87
        #endif
        EXPLAIN !!PasswordRevealEnabled_Explain
        VALUENAME "PasswordRevealEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PasswordMonitorAllowed_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!PasswordMonitorAllowed_Explain
        VALUENAME "PasswordMonitorAllowed"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Performance_Category
      POLICY !!StartupBoostEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!StartupBoostEnabled_Explain
        VALUENAME "StartupBoostEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!EfficiencyMode_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!EfficiencyMode_Explain

        PART !!EfficiencyMode_Part  DROPDOWNLIST
          VALUENAME "EfficiencyMode"
          ITEMLIST
            NAME !!EfficiencyMode_AlwaysActive_DropDown VALUE NUMERIC 0
            NAME !!EfficiencyMode_NeverActive_DropDown VALUE NUMERIC 1
            NAME !!EfficiencyMode_ActiveWhenUnplugged_DropDown VALUE NUMERIC 2
            NAME !!EfficiencyMode_ActiveWhenUnpluggedBatteryLow_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!SleepingTabs_Category
      POLICY !!SleepingTabsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsEnabled_Explain
        VALUENAME "SleepingTabsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SleepingTabsTimeout_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsTimeout_Explain

        PART !!SleepingTabsTimeout_Part  DROPDOWNLIST
          VALUENAME "SleepingTabsTimeout"
          ITEMLIST
            NAME !!SleepingTabsTimeout_5Minutes_DropDown VALUE NUMERIC 300
            NAME !!SleepingTabsTimeout_15Minutes_DropDown VALUE NUMERIC 900
            NAME !!SleepingTabsTimeout_30Minutes_DropDown VALUE NUMERIC 1800
            NAME !!SleepingTabsTimeout_1Hour_DropDown VALUE NUMERIC 3600
            NAME !!SleepingTabsTimeout_2Hours_DropDown VALUE NUMERIC 7200
            NAME !!SleepingTabsTimeout_3Hours_DropDown VALUE NUMERIC 10800
            NAME !!SleepingTabsTimeout_6Hours_DropDown VALUE NUMERIC 21600
            NAME !!SleepingTabsTimeout_12Hours_DropDown VALUE NUMERIC 43200
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!SleepingTabsBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsBlockedForUrls_Explain

        PART !!SleepingTabsBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\Recommended\SleepingTabsBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!SmartScreen_Category
      POLICY !!SmartScreenEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!SmartScreenEnabled_Explain
        VALUENAME "SmartScreenEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewSmartScreenLibraryEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V95
        #endif
        EXPLAIN !!NewSmartScreenLibraryEnabled_Explain
        VALUENAME "NewSmartScreenLibraryEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenForTrustedDownloadsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V78
        #endif
        EXPLAIN !!SmartScreenForTrustedDownloadsEnabled_Explain
        VALUENAME "SmartScreenForTrustedDownloadsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenPuaEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!SmartScreenPuaEnabled_Explain
        VALUENAME "SmartScreenPuaEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenDnsRequestsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!SmartScreenDnsRequestsEnabled_Explain
        VALUENAME "SmartScreenDnsRequestsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!DefaultSearchProvider_Category
      POLICY !!DefaultSearchProviderEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderEnabled_Explain
        VALUENAME "DefaultSearchProviderEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!DefaultSearchProviderName_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderName_Explain

        PART !!DefaultSearchProviderName_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderName"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderKeyword_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderKeyword_Explain

        PART !!DefaultSearchProviderKeyword_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderKeyword"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderSearchURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderSearchURL_Explain

        PART !!DefaultSearchProviderSearchURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderSearchURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderSuggestURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderSuggestURL_Explain

        PART !!DefaultSearchProviderSuggestURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderSuggestURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderEncodings_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderEncodings_Explain

        PART !!DefaultSearchProviderEncodings_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\Recommended\DefaultSearchProviderEncodings"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderImageURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderImageURL_Explain

        PART !!DefaultSearchProviderImageURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderImageURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderImageURLPostParams_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderImageURLPostParams_Explain

        PART !!DefaultSearchProviderImageURLPostParams_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderImageURLPostParams"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPageSearchBox_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!NewTabPageSearchBox_Explain

        PART !!NewTabPageSearchBox_Part  DROPDOWNLIST
          VALUENAME "NewTabPageSearchBox"
          ITEMLIST
            NAME !!NewTabPageSearchBox_bing_DropDown VALUE "bing"
            NAME !!NewTabPageSearchBox_redirect_DropDown VALUE "redirect"
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Startup_Category
      POLICY !!ShowHomeButton_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ShowHomeButton_Explain
        VALUENAME "ShowHomeButton"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!HomepageLocation_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!HomepageLocation_Explain

        PART !!HomepageLocation_Part  EDITTEXT
          VALUENAME "HomepageLocation"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!HomepageIsNewTabPage_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!HomepageIsNewTabPage_Explain
        VALUENAME "HomepageIsNewTabPage"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewTabPageLocation_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NewTabPageLocation_Explain

        PART !!NewTabPageLocation_Part  EDITTEXT
          VALUENAME "NewTabPageLocation"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPageSetFeedType_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V79_V92
        #endif
        EXPLAIN !!NewTabPageSetFeedType_Explain

        PART !!NewTabPageSetFeedType_Part  DROPDOWNLIST
          VALUENAME "NewTabPageSetFeedType"
          ITEMLIST
            NAME !!NewTabPageSetFeedType_News_DropDown VALUE NUMERIC 0
            NAME !!NewTabPageSetFeedType_Office_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!RestoreOnStartup_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!RestoreOnStartup_Explain

        PART !!RestoreOnStartup_Part  DROPDOWNLIST
          VALUENAME "RestoreOnStartup"
          ITEMLIST
            NAME !!RestoreOnStartup_RestoreOnStartupIsNewTabPage_DropDown VALUE NUMERIC 5
            NAME !!RestoreOnStartup_RestoreOnStartupIsLastSession_DropDown VALUE NUMERIC 1
            NAME !!RestoreOnStartup_RestoreOnStartupIsURLs_DropDown VALUE NUMERIC 4
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!RestoreOnStartupURLs_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!RestoreOnStartupURLs_Explain

        PART !!RestoreOnStartupURLs_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\Recommended\RestoreOnStartupURLs"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NewTabPageManagedQuickLinks_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V79
        #endif
        EXPLAIN !!NewTabPageManagedQuickLinks_Explain

        PART !!NewTabPageManagedQuickLinks_Part  EDITTEXT
          VALUENAME "NewTabPageManagedQuickLinks"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPagePrerenderEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!NewTabPagePrerenderEnabled_Explain
        VALUENAME "NewTabPagePrerenderEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!TyposquattingChecker_Category
      POLICY !!TyposquattingCheckerEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!TyposquattingCheckerEnabled_Explain
        VALUENAME "TyposquattingCheckerEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Printing_Category
      POLICY !!PrintHeaderFooter_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PrintHeaderFooter_Explain
        VALUENAME "PrintHeaderFooter"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrintPreviewUseSystemDefaultPrinter_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PrintPreviewUseSystemDefaultPrinter_Explain
        VALUENAME "PrintPreviewUseSystemDefaultPrinter"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrintingWebpageLayout_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!PrintingWebpageLayout_Explain

        PART !!PrintingWebpageLayout_Part  DROPDOWNLIST
          VALUENAME "PrintingWebpageLayout"
          ITEMLIST
            NAME !!PrintingWebpageLayout_portrait_DropDown VALUE NUMERIC 0
            NAME !!PrintingWebpageLayout_landscape_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Extensions_Category
      POLICY !!ControlDefaultStateOfAllowExtensionFromOtherStoresSettingEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V101
        #endif
        EXPLAIN !!ControlDefaultStateOfAllowExtensionFromOtherStoresSettingEnabled_Explain
        VALUENAME "ControlDefaultStateOfAllowExtensionFromOtherStoresSettingEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    POLICY !!AADWebSiteSSOUsingThisProfileEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!AADWebSiteSSOUsingThisProfileEnabled_Explain
      VALUENAME "AADWebSiteSSOUsingThisProfileEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AlternateErrorPagesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!AlternateErrorPagesEnabled_Explain
      VALUENAME "AlternateErrorPagesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ApplicationLocaleValue_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ApplicationLocaleValue_Explain

      PART !!ApplicationLocaleValue_Part  EDITTEXT
        VALUENAME "ApplicationLocaleValue"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!AutofillAddressEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AutofillAddressEnabled_Explain
      VALUENAME "AutofillAddressEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutofillCreditCardEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AutofillCreditCardEnabled_Explain
      VALUENAME "AutofillCreditCardEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutomaticHttpsDefault_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!AutomaticHttpsDefault_Explain

      PART !!AutomaticHttpsDefault_Part  DROPDOWNLIST
        VALUENAME "AutomaticHttpsDefault"
        ITEMLIST
          NAME !!AutomaticHttpsDefault_DisableAutomaticHttps_DropDown VALUE NUMERIC 0
          NAME !!AutomaticHttpsDefault_UpgradeCapableDomains_DropDown VALUE NUMERIC 1
          NAME !!AutomaticHttpsDefault_AlwaysUpgrade_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!BackgroundModeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BackgroundModeEnabled_Explain
      VALUENAME "BackgroundModeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BlockThirdPartyCookies_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BlockThirdPartyCookies_Explain
      VALUENAME "BlockThirdPartyCookies"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!FavoritesBarEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!FavoritesBarEnabled_Explain
      VALUENAME "FavoritesBarEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ClearBrowsingDataOnExit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!ClearBrowsingDataOnExit_Explain
      VALUENAME "ClearBrowsingDataOnExit"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ClearCachedImagesAndFilesOnExit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!ClearCachedImagesAndFilesOnExit_Explain
      VALUENAME "ClearCachedImagesAndFilesOnExit"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DownloadDirectory_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DownloadDirectory_Explain

      PART !!DownloadDirectory_Part  EDITTEXT
        VALUENAME "DownloadDirectory"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DownloadRestrictions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DownloadRestrictions_Explain

      PART !!DownloadRestrictions_Part  DROPDOWNLIST
        VALUENAME "DownloadRestrictions"
        ITEMLIST
          NAME !!DownloadRestrictions_DefaultDownloadSecurity_DropDown VALUE NUMERIC 0
          NAME !!DownloadRestrictions_BlockDangerousDownloads_DropDown VALUE NUMERIC 1
          NAME !!DownloadRestrictions_BlockPotentiallyDangerousDownloads_DropDown VALUE NUMERIC 2
          NAME !!DownloadRestrictions_BlockAllDownloads_DropDown VALUE NUMERIC 3
          NAME !!DownloadRestrictions_BlockMaliciousDownloads_DropDown VALUE NUMERIC 4
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!EdgeAssetDeliveryServiceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!EdgeAssetDeliveryServiceEnabled_Explain
      VALUENAME "EdgeAssetDeliveryServiceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeDiscoverEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!EdgeDiscoverEnabled_Explain
      VALUENAME "EdgeDiscoverEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeShoppingAssistantEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!EdgeShoppingAssistantEnabled_Explain
      VALUENAME "EdgeShoppingAssistantEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HubsSidebarEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!HubsSidebarEnabled_Explain
      VALUENAME "HubsSidebarEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportAutofillFormData_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportAutofillFormData_Explain
      VALUENAME "ImportAutofillFormData"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportFavorites_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportFavorites_Explain
      VALUENAME "ImportFavorites"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportBrowserSettings_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!ImportBrowserSettings_Explain
      VALUENAME "ImportBrowserSettings"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportCookies_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportCookies_Explain
      VALUENAME "ImportCookies"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportExtensions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportExtensions_Explain
      VALUENAME "ImportExtensions"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportHistory_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportHistory_Explain
      VALUENAME "ImportHistory"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportOpenTabs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!ImportOpenTabs_Explain
      VALUENAME "ImportOpenTabs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportPaymentInfo_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportPaymentInfo_Explain
      VALUENAME "ImportPaymentInfo"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportSavedPasswords_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportSavedPasswords_Explain
      VALUENAME "ImportSavedPasswords"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportSearchEngine_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportSearchEngine_Explain
      VALUENAME "ImportSearchEngine"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportShortcuts_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportShortcuts_Explain
      VALUENAME "ImportShortcuts"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportStartupPageSettings_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V91
      #endif
      EXPLAIN !!ImportStartupPageSettings_Explain
      VALUENAME "ImportStartupPageSettings"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationReloadInIEModeAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!InternetExplorerIntegrationReloadInIEModeAllowed_Explain
      VALUENAME "InternetExplorerIntegrationReloadInIEModeAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerModeToolbarButtonEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!InternetExplorerModeToolbarButtonEnabled_Explain
      VALUENAME "InternetExplorerModeToolbarButtonEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!LocalBrowserDataShareEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!LocalBrowserDataShareEnabled_Explain
      VALUENAME "LocalBrowserDataShareEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!LocalProvidersEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!LocalProvidersEnabled_Explain
      VALUENAME "LocalProvidersEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MSAWebSiteSSOUsingThisProfileAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!MSAWebSiteSSOUsingThisProfileAllowed_Explain
      VALUENAME "MSAWebSiteSSOUsingThisProfileAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ManagedSearchEngines_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ManagedSearchEngines_Explain

      PART !!ManagedSearchEngines_Part  EDITTEXT
        VALUENAME "ManagedSearchEngines"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!NetworkPredictionOptions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!NetworkPredictionOptions_Explain

      PART !!NetworkPredictionOptions_Part  DROPDOWNLIST
        VALUENAME "NetworkPredictionOptions"
        ITEMLIST
          NAME !!NetworkPredictionOptions_NetworkPredictionAlways_DropDown VALUE NUMERIC 0
          NAME !!NetworkPredictionOptions_NetworkPredictionWifiOnly_DropDown VALUE NUMERIC 1
          NAME !!NetworkPredictionOptions_NetworkPredictionNever_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!RedirectSitesFromInternetExplorerRedirectMode_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!RedirectSitesFromInternetExplorerRedirectMode_Explain

      PART !!RedirectSitesFromInternetExplorerRedirectMode_Part  DROPDOWNLIST
        VALUENAME "RedirectSitesFromInternetExplorerRedirectMode"
        ITEMLIST
          NAME !!RedirectSitesFromInternetExplorerRedirectMode_Disable_DropDown VALUE NUMERIC 0
          NAME !!RedirectSitesFromInternetExplorerRedirectMode_Sitelist_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ResolveNavigationErrorsUseWebService_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ResolveNavigationErrorsUseWebService_Explain
      VALUENAME "ResolveNavigationErrorsUseWebService"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SearchSuggestEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SearchSuggestEnabled_Explain
      VALUENAME "SearchSuggestEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ShowMicrosoftRewards_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!ShowMicrosoftRewards_Explain
      VALUENAME "ShowMicrosoftRewards"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SiteSafetyServicesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!SiteSafetyServicesEnabled_Explain
      VALUENAME "SiteSafetyServicesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SmartActionsBlockList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!SmartActionsBlockList_Explain

      PART !!SmartActionsBlockList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\Recommended\SmartActionsBlockList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SyncDisabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SyncDisabled_Explain
      VALUENAME "SyncDisabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TranslateEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!TranslateEnabled_Explain
      VALUENAME "TranslateEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TravelAssistanceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!TravelAssistanceEnabled_Explain
      VALUENAME "TravelAssistanceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!VisualSearchEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!VisualSearchEnabled_Explain
      VALUENAME "VisualSearchEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

  END CATEGORY


CLASS USER
  CATEGORY !!microsoft_edge
    KEYNAME "Software\Policies\Microsoft\Edge"

    CATEGORY !!Other_Category
      POLICY !!PromptOnMultipleMatchingCertificates_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V100
        #endif
        EXPLAIN !!PromptOnMultipleMatchingCertificates_Explain
        VALUENAME "PromptOnMultipleMatchingCertificates"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!ApplicationGuard_Category
      POLICY !!ApplicationGuardContainerProxy_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V84
        #endif
        EXPLAIN !!ApplicationGuardContainerProxy_Explain

        PART !!ApplicationGuardContainerProxy_Part  EDITTEXT
          VALUENAME "ApplicationGuardContainerProxy"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!ApplicationGuardFavoritesSyncEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V90
        #endif
        EXPLAIN !!ApplicationGuardFavoritesSyncEnabled_Explain
        VALUENAME "ApplicationGuardFavoritesSyncEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!ApplicationGuardPassiveModeEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V94
        #endif
        EXPLAIN !!ApplicationGuardPassiveModeEnabled_Explain
        VALUENAME "ApplicationGuardPassiveModeEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!ApplicationGuardTrafficIdentificationEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V91
        #endif
        EXPLAIN !!ApplicationGuardTrafficIdentificationEnabled_Explain
        VALUENAME "ApplicationGuardTrafficIdentificationEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!ApplicationGuardUploadBlockingEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!ApplicationGuardUploadBlockingEnabled_Explain
        VALUENAME "ApplicationGuardUploadBlockingEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!GoogleCast_Category
      POLICY !!EnableMediaRouter_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!EnableMediaRouter_Explain
        VALUENAME "EnableMediaRouter"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!ShowCastIconInToolbar_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ShowCastIconInToolbar_Explain
        VALUENAME "ShowCastIconInToolbar"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Experimentation_Category
      POLICY !!FeatureFlagOverridesControl_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!FeatureFlagOverridesControl_Explain

        PART !!FeatureFlagOverridesControl_Part  DROPDOWNLIST
          VALUENAME "FeatureFlagOverridesControl"
          ITEMLIST
            NAME !!FeatureFlagOverridesControl_CommandLineOverridesEnabled_DropDown VALUE NUMERIC 2
            NAME !!FeatureFlagOverridesControl_OverridesEnabled_DropDown VALUE NUMERIC 1
            NAME !!FeatureFlagOverridesControl_OverridesDisabled_DropDown VALUE NUMERIC 0
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!HTTPAuthentication_Category
      POLICY !!AuthSchemes_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!AuthSchemes_Explain

        PART !!AuthSchemes_Part  EDITTEXT
          VALUENAME "AuthSchemes"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DisableAuthNegotiateCnameLookup_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DisableAuthNegotiateCnameLookup_Explain
        VALUENAME "DisableAuthNegotiateCnameLookup"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!EnableAuthNegotiatePort_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!EnableAuthNegotiatePort_Explain
        VALUENAME "EnableAuthNegotiatePort"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!BasicAuthOverHttpEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!BasicAuthOverHttpEnabled_Explain
        VALUENAME "BasicAuthOverHttpEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!AuthServerAllowlist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!AuthServerAllowlist_Explain

        PART !!AuthServerAllowlist_Part  EDITTEXT
          VALUENAME "AuthServerAllowlist"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!AuthNegotiateDelegateAllowlist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!AuthNegotiateDelegateAllowlist_Explain

        PART !!AuthNegotiateDelegateAllowlist_Part  EDITTEXT
          VALUENAME "AuthNegotiateDelegateAllowlist"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!AllowCrossOriginAuthPrompt_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!AllowCrossOriginAuthPrompt_Explain
        VALUENAME "AllowCrossOriginAuthPrompt"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!WindowsHelloForHTTPAuthEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V90
        #endif
        EXPLAIN !!WindowsHelloForHTTPAuthEnabled_Explain
        VALUENAME "WindowsHelloForHTTPAuthEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Identity_Category
      POLICY !!ImplicitSignInEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!ImplicitSignInEnabled_Explain
        VALUENAME "ImplicitSignInEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!OneAuthAuthenticationEnforced_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!OneAuthAuthenticationEnforced_Explain
        VALUENAME "OneAuthAuthenticationEnforced"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!OnlyOnPremisesImplicitSigninEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V94
        #endif
        EXPLAIN !!OnlyOnPremisesImplicitSigninEnabled_Explain
        VALUENAME "OnlyOnPremisesImplicitSigninEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!EdgeDefaultProfileEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V101
        #endif
        EXPLAIN !!EdgeDefaultProfileEnabled_Explain

        PART !!EdgeDefaultProfileEnabled_Part  EDITTEXT
          VALUENAME "EdgeDefaultProfileEnabled"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!WAMAuthBelowWin10RS3Enabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!WAMAuthBelowWin10RS3Enabled_Explain
        VALUENAME "WAMAuthBelowWin10RS3Enabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!NativeMessaging_Category
      POLICY !!NativeMessagingBlocklist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NativeMessagingBlocklist_Explain

        PART !!NativeMessagingBlocklist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\NativeMessagingBlocklist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NativeMessagingAllowlist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NativeMessagingAllowlist_Explain

        PART !!NativeMessagingAllowlist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\NativeMessagingAllowlist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NativeMessagingUserLevelHosts_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NativeMessagingUserLevelHosts_Explain
        VALUENAME "NativeMessagingUserLevelHosts"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!ContentSettings_Category
      POLICY !!DefaultCookiesSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultCookiesSetting_Explain

        PART !!DefaultCookiesSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultCookiesSetting"
          ITEMLIST
            NAME !!DefaultCookiesSetting_AllowCookies_DropDown VALUE NUMERIC 1
            NAME !!DefaultCookiesSetting_BlockCookies_DropDown VALUE NUMERIC 2
            NAME !!DefaultCookiesSetting_SessionOnly_DropDown VALUE NUMERIC 4
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultFileSystemReadGuardSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!DefaultFileSystemReadGuardSetting_Explain

        PART !!DefaultFileSystemReadGuardSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultFileSystemReadGuardSetting"
          ITEMLIST
            NAME !!DefaultFileSystemReadGuardSetting_BlockFileSystemRead_DropDown VALUE NUMERIC 2
            NAME !!DefaultFileSystemReadGuardSetting_AskFileSystemRead_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultFileSystemWriteGuardSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!DefaultFileSystemWriteGuardSetting_Explain

        PART !!DefaultFileSystemWriteGuardSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultFileSystemWriteGuardSetting"
          ITEMLIST
            NAME !!DefaultFileSystemWriteGuardSetting_BlockFileSystemWrite_DropDown VALUE NUMERIC 2
            NAME !!DefaultFileSystemWriteGuardSetting_AskFileSystemWrite_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultImagesSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultImagesSetting_Explain

        PART !!DefaultImagesSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultImagesSetting"
          ITEMLIST
            NAME !!DefaultImagesSetting_AllowImages_DropDown VALUE NUMERIC 1
            NAME !!DefaultImagesSetting_BlockImages_DropDown VALUE NUMERIC 2
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultInsecureContentSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!DefaultInsecureContentSetting_Explain

        PART !!DefaultInsecureContentSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultInsecureContentSetting"
          ITEMLIST
            NAME !!DefaultInsecureContentSetting_BlockInsecureContent_DropDown VALUE NUMERIC 2
            NAME !!DefaultInsecureContentSetting_AllowExceptionsInsecureContent_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultJavaScriptSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultJavaScriptSetting_Explain

        PART !!DefaultJavaScriptSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultJavaScriptSetting"
          ITEMLIST
            NAME !!DefaultJavaScriptSetting_AllowJavaScript_DropDown VALUE NUMERIC 1
            NAME !!DefaultJavaScriptSetting_BlockJavaScript_DropDown VALUE NUMERIC 2
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultJavaScriptJitSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!DefaultJavaScriptJitSetting_Explain

        PART !!DefaultJavaScriptJitSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultJavaScriptJitSetting"
          ITEMLIST
            NAME !!DefaultJavaScriptJitSetting_AllowJavaScriptJit_DropDown VALUE NUMERIC 1
            NAME !!DefaultJavaScriptJitSetting_BlockJavaScriptJit_DropDown VALUE NUMERIC 2
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultPluginsSetting_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V77_V87
        #endif
        EXPLAIN !!DefaultPluginsSetting_Explain

        PART !!DefaultPluginsSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultPluginsSetting"
          ITEMLIST
            NAME !!DefaultPluginsSetting_BlockPlugins_DropDown VALUE NUMERIC 2
            NAME !!DefaultPluginsSetting_ClickToPlay_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultPopupsSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultPopupsSetting_Explain

        PART !!DefaultPopupsSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultPopupsSetting"
          ITEMLIST
            NAME !!DefaultPopupsSetting_AllowPopups_DropDown VALUE NUMERIC 1
            NAME !!DefaultPopupsSetting_BlockPopups_DropDown VALUE NUMERIC 2
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultNotificationsSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultNotificationsSetting_Explain

        PART !!DefaultNotificationsSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultNotificationsSetting"
          ITEMLIST
            NAME !!DefaultNotificationsSetting_AllowNotifications_DropDown VALUE NUMERIC 1
            NAME !!DefaultNotificationsSetting_BlockNotifications_DropDown VALUE NUMERIC 2
            NAME !!DefaultNotificationsSetting_AskNotifications_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultGeolocationSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultGeolocationSetting_Explain

        PART !!DefaultGeolocationSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultGeolocationSetting"
          ITEMLIST
            NAME !!DefaultGeolocationSetting_AllowGeolocation_DropDown VALUE NUMERIC 1
            NAME !!DefaultGeolocationSetting_BlockGeolocation_DropDown VALUE NUMERIC 2
            NAME !!DefaultGeolocationSetting_AskGeolocation_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultWebBluetoothGuardSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultWebBluetoothGuardSetting_Explain

        PART !!DefaultWebBluetoothGuardSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultWebBluetoothGuardSetting"
          ITEMLIST
            NAME !!DefaultWebBluetoothGuardSetting_BlockWebBluetooth_DropDown VALUE NUMERIC 2
            NAME !!DefaultWebBluetoothGuardSetting_AskWebBluetooth_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultWebUsbGuardSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultWebUsbGuardSetting_Explain

        PART !!DefaultWebUsbGuardSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultWebUsbGuardSetting"
          ITEMLIST
            NAME !!DefaultWebUsbGuardSetting_BlockWebUsb_DropDown VALUE NUMERIC 2
            NAME !!DefaultWebUsbGuardSetting_AskWebUsb_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!DefaultWebHidGuardSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V100
        #endif
        EXPLAIN !!DefaultWebHidGuardSetting_Explain

        PART !!DefaultWebHidGuardSetting_Part  DROPDOWNLIST
          VALUENAME "DefaultWebHidGuardSetting"
          ITEMLIST
            NAME !!DefaultWebHidGuardSetting_BlockWebHid_DropDown VALUE NUMERIC 2
            NAME !!DefaultWebHidGuardSetting_AskWebHid_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!ShowPDFDefaultRecommendationsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!ShowPDFDefaultRecommendationsEnabled_Explain
        VALUENAME "ShowPDFDefaultRecommendationsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!AutoSelectCertificateForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!AutoSelectCertificateForUrls_Explain

        PART !!AutoSelectCertificateForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\AutoSelectCertificateForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!CookiesAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!CookiesAllowedForUrls_Explain

        PART !!CookiesAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\CookiesAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!CookiesBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!CookiesBlockedForUrls_Explain

        PART !!CookiesBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\CookiesBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!CookiesSessionOnlyForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!CookiesSessionOnlyForUrls_Explain

        PART !!CookiesSessionOnlyForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\CookiesSessionOnlyForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!FileSystemReadAskForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!FileSystemReadAskForUrls_Explain

        PART !!FileSystemReadAskForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\FileSystemReadAskForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!FileSystemReadBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!FileSystemReadBlockedForUrls_Explain

        PART !!FileSystemReadBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\FileSystemReadBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!FileSystemWriteAskForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!FileSystemWriteAskForUrls_Explain

        PART !!FileSystemWriteAskForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\FileSystemWriteAskForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!FileSystemWriteBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!FileSystemWriteBlockedForUrls_Explain

        PART !!FileSystemWriteBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\FileSystemWriteBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!SpotlightExperiencesAndRecommendationsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!SpotlightExperiencesAndRecommendationsEnabled_Explain
        VALUENAME "SpotlightExperiencesAndRecommendationsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!ImagesAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ImagesAllowedForUrls_Explain

        PART !!ImagesAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ImagesAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ImagesBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ImagesBlockedForUrls_Explain

        PART !!ImagesBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ImagesBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!InsecureContentAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!InsecureContentAllowedForUrls_Explain

        PART !!InsecureContentAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\InsecureContentAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!InsecureContentBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!InsecureContentBlockedForUrls_Explain

        PART !!InsecureContentBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\InsecureContentBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!IntranetFileLinksEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V95
        #endif
        EXPLAIN !!IntranetFileLinksEnabled_Explain
        VALUENAME "IntranetFileLinksEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!JavaScriptAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!JavaScriptAllowedForUrls_Explain

        PART !!JavaScriptAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\JavaScriptAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!JavaScriptBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!JavaScriptBlockedForUrls_Explain

        PART !!JavaScriptBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\JavaScriptBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!JavaScriptJitAllowedForSites_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!JavaScriptJitAllowedForSites_Explain

        PART !!JavaScriptJitAllowedForSites_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\JavaScriptJitAllowedForSites"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!JavaScriptJitBlockedForSites_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!JavaScriptJitBlockedForSites_Explain

        PART !!JavaScriptJitBlockedForSites_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\JavaScriptJitBlockedForSites"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!LegacySameSiteCookieBehaviorEnabled_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V80_V94
        #endif
        EXPLAIN !!LegacySameSiteCookieBehaviorEnabled_Explain

        PART !!LegacySameSiteCookieBehaviorEnabled_Part  DROPDOWNLIST
          VALUENAME "LegacySameSiteCookieBehaviorEnabled"
          ITEMLIST
            NAME !!LegacySameSiteCookieBehaviorEnabled_DefaultToLegacySameSiteCookieBehavior_DropDown VALUE NUMERIC 1
            NAME !!LegacySameSiteCookieBehaviorEnabled_DefaultToSameSiteByDefaultCookieBehavior_DropDown VALUE NUMERIC 2
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!LegacySameSiteCookieBehaviorEnabledForDomainList_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!LegacySameSiteCookieBehaviorEnabledForDomainList_Explain

        PART !!LegacySameSiteCookieBehaviorEnabledForDomainList_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\LegacySameSiteCookieBehaviorEnabledForDomainList"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PluginsAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V77_V87
        #endif
        EXPLAIN !!PluginsAllowedForUrls_Explain

        PART !!PluginsAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PluginsAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PluginsBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V77_V87
        #endif
        EXPLAIN !!PluginsBlockedForUrls_Explain

        PART !!PluginsBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PluginsBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PopupsAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PopupsAllowedForUrls_Explain

        PART !!PopupsAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PopupsAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PopupsBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PopupsBlockedForUrls_Explain

        PART !!PopupsBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PopupsBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NotificationsAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NotificationsAllowedForUrls_Explain

        PART !!NotificationsAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\NotificationsAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NotificationsBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NotificationsBlockedForUrls_Explain

        PART !!NotificationsBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\NotificationsBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!SerialAllowAllPortsForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!SerialAllowAllPortsForUrls_Explain

        PART !!SerialAllowAllPortsForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\SerialAllowAllPortsForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!SerialAllowUsbDevicesForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!SerialAllowUsbDevicesForUrls_Explain

        PART !!SerialAllowUsbDevicesForUrls_Part  EDITTEXT
          VALUENAME "SerialAllowUsbDevicesForUrls"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!WebUsbAllowDevicesForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!WebUsbAllowDevicesForUrls_Explain

        PART !!WebUsbAllowDevicesForUrls_Part  EDITTEXT
          VALUENAME "WebUsbAllowDevicesForUrls"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!WebUsbAskForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!WebUsbAskForUrls_Explain

        PART !!WebUsbAskForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\WebUsbAskForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!WebUsbBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!WebUsbBlockedForUrls_Explain

        PART !!WebUsbBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\WebUsbBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!WebHidAskForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V100
        #endif
        EXPLAIN !!WebHidAskForUrls_Explain

        PART !!WebHidAskForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\WebHidAskForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!WebHidBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V100
        #endif
        EXPLAIN !!WebHidBlockedForUrls_Explain

        PART !!WebHidBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\WebHidBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!KioskMode_Category
      POLICY !!KioskAddressBarEditingEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V87
        #endif
        EXPLAIN !!KioskAddressBarEditingEnabled_Explain
        VALUENAME "KioskAddressBarEditingEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!KioskDeleteDownloadsOnExit_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V87
        #endif
        EXPLAIN !!KioskDeleteDownloadsOnExit_Explain
        VALUENAME "KioskDeleteDownloadsOnExit"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!KioskSwipeGesturesEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V101
        #endif
        EXPLAIN !!KioskSwipeGesturesEnabled_Explain
        VALUENAME "KioskSwipeGesturesEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Manageability_Category
      POLICY !!MAMEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V89
        #endif
        EXPLAIN !!MAMEnabled_Explain
        VALUENAME "MAMEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!PasswordManager_Category
      POLICY !!PasswordManagerEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PasswordManagerEnabled_Explain
        VALUENAME "PasswordManagerEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PasswordManagerBlocklist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V99
        #endif
        EXPLAIN !!PasswordManagerBlocklist_Explain

        PART !!PasswordManagerBlocklist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PasswordManagerBlocklist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PasswordProtectionWarningTrigger_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PasswordProtectionWarningTrigger_Explain

        PART !!PasswordProtectionWarningTrigger_Part  DROPDOWNLIST
          VALUENAME "PasswordProtectionWarningTrigger"
          ITEMLIST
            NAME !!PasswordProtectionWarningTrigger_PasswordProtectionWarningOff_DropDown VALUE NUMERIC 0
            NAME !!PasswordProtectionWarningTrigger_PasswordProtectionWarningOnPasswordReuse_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PasswordProtectionLoginURLs_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PasswordProtectionLoginURLs_Explain

        PART !!PasswordProtectionLoginURLs_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PasswordProtectionLoginURLs"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PasswordProtectionChangePasswordURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PasswordProtectionChangePasswordURL_Explain

        PART !!PasswordProtectionChangePasswordURL_Part  EDITTEXT
          VALUENAME "PasswordProtectionChangePasswordURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!PasswordMonitorAllowed_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!PasswordMonitorAllowed_Explain
        VALUENAME "PasswordMonitorAllowed"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PasswordGeneratorEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!PasswordGeneratorEnabled_Explain
        VALUENAME "PasswordGeneratorEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrimaryPasswordSetting_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!PrimaryPasswordSetting_Explain

        PART !!PrimaryPasswordSetting_Part  DROPDOWNLIST
          VALUENAME "PrimaryPasswordSetting"
          ITEMLIST
            NAME !!PrimaryPasswordSetting_Automatically_DropDown VALUE NUMERIC 0
            NAME !!PrimaryPasswordSetting_WithDevicePassword_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Performance_Category
      POLICY !!StartupBoostEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!StartupBoostEnabled_Explain
        VALUENAME "StartupBoostEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!EfficiencyMode_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!EfficiencyMode_Explain

        PART !!EfficiencyMode_Part  DROPDOWNLIST
          VALUENAME "EfficiencyMode"
          ITEMLIST
            NAME !!EfficiencyMode_AlwaysActive_DropDown VALUE NUMERIC 0
            NAME !!EfficiencyMode_NeverActive_DropDown VALUE NUMERIC 1
            NAME !!EfficiencyMode_ActiveWhenUnplugged_DropDown VALUE NUMERIC 2
            NAME !!EfficiencyMode_ActiveWhenUnpluggedBatteryLow_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!ScreenCapture_Category
      POLICY !!ScreenCaptureAllowedByOrigins_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!ScreenCaptureAllowedByOrigins_Explain

        PART !!ScreenCaptureAllowedByOrigins_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ScreenCaptureAllowedByOrigins"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!WindowCaptureAllowedByOrigins_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!WindowCaptureAllowedByOrigins_Explain

        PART !!WindowCaptureAllowedByOrigins_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\WindowCaptureAllowedByOrigins"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!TabCaptureAllowedByOrigins_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!TabCaptureAllowedByOrigins_Explain

        PART !!TabCaptureAllowedByOrigins_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\TabCaptureAllowedByOrigins"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!SameOriginTabCaptureAllowedByOrigins_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!SameOriginTabCaptureAllowedByOrigins_Explain

        PART !!SameOriginTabCaptureAllowedByOrigins_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\SameOriginTabCaptureAllowedByOrigins"
          VALUEPREFIX ""
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!PrivateNetworkRequestSettings_Category
      POLICY !!InsecurePrivateNetworkRequestsAllowed_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V92
        #endif
        EXPLAIN !!InsecurePrivateNetworkRequestsAllowed_Explain
        VALUENAME "InsecurePrivateNetworkRequestsAllowed"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!InsecurePrivateNetworkRequestsAllowedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V92
        #endif
        EXPLAIN !!InsecurePrivateNetworkRequestsAllowedForUrls_Explain

        PART !!InsecurePrivateNetworkRequestsAllowedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\InsecurePrivateNetworkRequestsAllowedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Proxy_Category
      POLICY !!ProxyMode_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ProxyMode_Explain

        PART !!ProxyMode_Part  DROPDOWNLIST
          VALUENAME "ProxyMode"
          ITEMLIST
            NAME !!ProxyMode_ProxyDisabled_DropDown VALUE "direct"
            NAME !!ProxyMode_ProxyAutoDetect_DropDown VALUE "auto_detect"
            NAME !!ProxyMode_ProxyPacScript_DropDown VALUE "pac_script"
            NAME !!ProxyMode_ProxyFixedServers_DropDown VALUE "fixed_servers"
            NAME !!ProxyMode_ProxyUseSystem_DropDown VALUE "system"
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!ProxyServer_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ProxyServer_Explain

        PART !!ProxyServer_Part  EDITTEXT
          VALUENAME "ProxyServer"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!ProxyPacUrl_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ProxyPacUrl_Explain

        PART !!ProxyPacUrl_Part  EDITTEXT
          VALUENAME "ProxyPacUrl"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!ProxyBypassList_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ProxyBypassList_Explain

        PART !!ProxyBypassList_Part  EDITTEXT
          VALUENAME "ProxyBypassList"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!ProxySettings_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ProxySettings_Explain

        PART !!ProxySettings_Part  EDITTEXT
          VALUENAME "ProxySettings"
          MAXLEN 1000000
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!SleepingTabs_Category
      POLICY !!SleepingTabsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsEnabled_Explain
        VALUENAME "SleepingTabsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SleepingTabsTimeout_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsTimeout_Explain

        PART !!SleepingTabsTimeout_Part  DROPDOWNLIST
          VALUENAME "SleepingTabsTimeout"
          ITEMLIST
            NAME !!SleepingTabsTimeout_5Minutes_DropDown VALUE NUMERIC 300
            NAME !!SleepingTabsTimeout_15Minutes_DropDown VALUE NUMERIC 900
            NAME !!SleepingTabsTimeout_30Minutes_DropDown VALUE NUMERIC 1800
            NAME !!SleepingTabsTimeout_1Hour_DropDown VALUE NUMERIC 3600
            NAME !!SleepingTabsTimeout_2Hours_DropDown VALUE NUMERIC 7200
            NAME !!SleepingTabsTimeout_3Hours_DropDown VALUE NUMERIC 10800
            NAME !!SleepingTabsTimeout_6Hours_DropDown VALUE NUMERIC 21600
            NAME !!SleepingTabsTimeout_12Hours_DropDown VALUE NUMERIC 43200
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!SleepingTabsBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsBlockedForUrls_Explain

        PART !!SleepingTabsBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\SleepingTabsBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!SmartScreen_Category
      POLICY !!SmartScreenEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!SmartScreenEnabled_Explain
        VALUENAME "SmartScreenEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewSmartScreenLibraryEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V95
        #endif
        EXPLAIN !!NewSmartScreenLibraryEnabled_Explain
        VALUENAME "NewSmartScreenLibraryEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PreventSmartScreenPromptOverride_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PreventSmartScreenPromptOverride_Explain
        VALUENAME "PreventSmartScreenPromptOverride"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PreventSmartScreenPromptOverrideForFiles_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PreventSmartScreenPromptOverrideForFiles_Explain
        VALUENAME "PreventSmartScreenPromptOverrideForFiles"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenAllowListDomains_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!SmartScreenAllowListDomains_Explain

        PART !!SmartScreenAllowListDomains_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\SmartScreenAllowListDomains"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!SmartScreenForTrustedDownloadsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V78
        #endif
        EXPLAIN !!SmartScreenForTrustedDownloadsEnabled_Explain
        VALUENAME "SmartScreenForTrustedDownloadsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenPuaEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!SmartScreenPuaEnabled_Explain
        VALUENAME "SmartScreenPuaEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenDnsRequestsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!SmartScreenDnsRequestsEnabled_Explain
        VALUENAME "SmartScreenDnsRequestsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!DefaultSearchProvider_Category
      POLICY !!DefaultSearchProviderEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderEnabled_Explain
        VALUENAME "DefaultSearchProviderEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!DefaultSearchProviderName_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderName_Explain

        PART !!DefaultSearchProviderName_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderName"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderKeyword_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderKeyword_Explain

        PART !!DefaultSearchProviderKeyword_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderKeyword"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderSearchURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderSearchURL_Explain

        PART !!DefaultSearchProviderSearchURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderSearchURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderSuggestURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderSuggestURL_Explain

        PART !!DefaultSearchProviderSuggestURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderSuggestURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderEncodings_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderEncodings_Explain

        PART !!DefaultSearchProviderEncodings_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\DefaultSearchProviderEncodings"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderImageURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderImageURL_Explain

        PART !!DefaultSearchProviderImageURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderImageURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderImageURLPostParams_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderImageURLPostParams_Explain

        PART !!DefaultSearchProviderImageURLPostParams_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderImageURLPostParams"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPageSearchBox_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!NewTabPageSearchBox_Explain

        PART !!NewTabPageSearchBox_Part  DROPDOWNLIST
          VALUENAME "NewTabPageSearchBox"
          ITEMLIST
            NAME !!NewTabPageSearchBox_bing_DropDown VALUE "bing"
            NAME !!NewTabPageSearchBox_redirect_DropDown VALUE "redirect"
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Startup_Category
      POLICY !!ShowHomeButton_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ShowHomeButton_Explain
        VALUENAME "ShowHomeButton"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!HomepageLocation_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!HomepageLocation_Explain

        PART !!HomepageLocation_Part  EDITTEXT
          VALUENAME "HomepageLocation"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!HomepageIsNewTabPage_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!HomepageIsNewTabPage_Explain
        VALUENAME "HomepageIsNewTabPage"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewTabPageAllowedBackgroundTypes_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!NewTabPageAllowedBackgroundTypes_Explain

        PART !!NewTabPageAllowedBackgroundTypes_Part  DROPDOWNLIST
          VALUENAME "NewTabPageAllowedBackgroundTypes"
          ITEMLIST
            NAME !!NewTabPageAllowedBackgroundTypes_DisableImageOfTheDay_DropDown VALUE NUMERIC 1
            NAME !!NewTabPageAllowedBackgroundTypes_DisableCustomImage_DropDown VALUE NUMERIC 2
            NAME !!NewTabPageAllowedBackgroundTypes_DisableAll_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!NewTabPageLocation_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NewTabPageLocation_Explain

        PART !!NewTabPageLocation_Part  EDITTEXT
          VALUENAME "NewTabPageLocation"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPageSetFeedType_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V79_V92
        #endif
        EXPLAIN !!NewTabPageSetFeedType_Explain

        PART !!NewTabPageSetFeedType_Part  DROPDOWNLIST
          VALUENAME "NewTabPageSetFeedType"
          ITEMLIST
            NAME !!NewTabPageSetFeedType_News_DropDown VALUE NUMERIC 0
            NAME !!NewTabPageSetFeedType_Office_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!RestoreOnStartup_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!RestoreOnStartup_Explain

        PART !!RestoreOnStartup_Part  DROPDOWNLIST
          VALUENAME "RestoreOnStartup"
          ITEMLIST
            NAME !!RestoreOnStartup_RestoreOnStartupIsNewTabPage_DropDown VALUE NUMERIC 5
            NAME !!RestoreOnStartup_RestoreOnStartupIsLastSession_DropDown VALUE NUMERIC 1
            NAME !!RestoreOnStartup_RestoreOnStartupIsURLs_DropDown VALUE NUMERIC 4
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!RestoreOnStartupURLs_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!RestoreOnStartupURLs_Explain

        PART !!RestoreOnStartupURLs_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\RestoreOnStartupURLs"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NewTabPageCompanyLogo_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V79_V85
        #endif
        EXPLAIN !!NewTabPageCompanyLogo_Explain

        PART !!NewTabPageCompanyLogo_Part  EDITTEXT
          VALUENAME "NewTabPageCompanyLogo"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPageContentEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V91
        #endif
        EXPLAIN !!NewTabPageContentEnabled_Explain
        VALUENAME "NewTabPageContentEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewTabPageHideDefaultTopSites_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NewTabPageHideDefaultTopSites_Explain
        VALUENAME "NewTabPageHideDefaultTopSites"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewTabPageManagedQuickLinks_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V79
        #endif
        EXPLAIN !!NewTabPageManagedQuickLinks_Explain

        PART !!NewTabPageManagedQuickLinks_Part  EDITTEXT
          VALUENAME "NewTabPageManagedQuickLinks"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPagePrerenderEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!NewTabPagePrerenderEnabled_Explain
        VALUENAME "NewTabPagePrerenderEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewTabPageQuickLinksEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V91
        #endif
        EXPLAIN !!NewTabPageQuickLinksEnabled_Explain
        VALUENAME "NewTabPageQuickLinksEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!TyposquattingChecker_Category
      POLICY !!TyposquattingCheckerEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!TyposquattingCheckerEnabled_Explain
        VALUENAME "TyposquattingCheckerEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Printing_Category
      POLICY !!PrintingEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PrintingEnabled_Explain
        VALUENAME "PrintingEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrintingAllowedBackgroundGraphicsModes_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V89
        #endif
        EXPLAIN !!PrintingAllowedBackgroundGraphicsModes_Explain

        PART !!PrintingAllowedBackgroundGraphicsModes_Part  DROPDOWNLIST
          VALUENAME "PrintingAllowedBackgroundGraphicsModes"
          ITEMLIST
            NAME !!PrintingAllowedBackgroundGraphicsModes_any_DropDown VALUE "any"
            NAME !!PrintingAllowedBackgroundGraphicsModes_enabled_DropDown VALUE "enabled"
            NAME !!PrintingAllowedBackgroundGraphicsModes_disabled_DropDown VALUE "disabled"
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PrintingBackgroundGraphicsDefault_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V89
        #endif
        EXPLAIN !!PrintingBackgroundGraphicsDefault_Explain

        PART !!PrintingBackgroundGraphicsDefault_Part  DROPDOWNLIST
          VALUENAME "PrintingBackgroundGraphicsDefault"
          ITEMLIST
            NAME !!PrintingBackgroundGraphicsDefault_enabled_DropDown VALUE "enabled"
            NAME !!PrintingBackgroundGraphicsDefault_disabled_DropDown VALUE "disabled"
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PrintingPaperSizeDefault_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V86
        #endif
        EXPLAIN !!PrintingPaperSizeDefault_Explain

        PART !!PrintingPaperSizeDefault_Part  EDITTEXT
          VALUENAME "PrintingPaperSizeDefault"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!UseSystemPrintDialog_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!UseSystemPrintDialog_Explain
        VALUENAME "UseSystemPrintDialog"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrintHeaderFooter_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PrintHeaderFooter_Explain
        VALUENAME "PrintHeaderFooter"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!DefaultPrinterSelection_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultPrinterSelection_Explain

        PART !!DefaultPrinterSelection_Part  EDITTEXT
          VALUENAME "DefaultPrinterSelection"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!PrintPreviewUseSystemDefaultPrinter_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PrintPreviewUseSystemDefaultPrinter_Explain
        VALUENAME "PrintPreviewUseSystemDefaultPrinter"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrinterTypeDenyList_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!PrinterTypeDenyList_Explain

        PART !!PrinterTypeDenyList_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\PrinterTypeDenyList"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!PrintRasterizationMode_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V90
        #endif
        EXPLAIN !!PrintRasterizationMode_Explain

        PART !!PrintRasterizationMode_Part  DROPDOWNLIST
          VALUENAME "PrintRasterizationMode"
          ITEMLIST
            NAME !!PrintRasterizationMode_Full_DropDown VALUE NUMERIC 0
            NAME !!PrintRasterizationMode_Fast_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PrintRasterizePdfDpi_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!PrintRasterizePdfDpi_Explain

        PART !!PrintRasterizePdfDpi_Part  NUMERIC
          VALUENAME "PrintRasterizePdfDpi"
          MIN 0 MAX 2000000000
        END PART
      END POLICY

      POLICY !!PrintingWebpageLayout_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!PrintingWebpageLayout_Explain

        PART !!PrintingWebpageLayout_Part  DROPDOWNLIST
          VALUENAME "PrintingWebpageLayout"
          ITEMLIST
            NAME !!PrintingWebpageLayout_portrait_DropDown VALUE NUMERIC 0
            NAME !!PrintingWebpageLayout_landscape_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PrintPostScriptMode_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!PrintPostScriptMode_Explain

        PART !!PrintPostScriptMode_Part  DROPDOWNLIST
          VALUENAME "PrintPostScriptMode"
          ITEMLIST
            NAME !!PrintPostScriptMode_Default_DropDown VALUE NUMERIC 0
            NAME !!PrintPostScriptMode_Type42_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!PrintStickySettings_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V98
        #endif
        EXPLAIN !!PrintStickySettings_Explain

        PART !!PrintStickySettings_Part  DROPDOWNLIST
          VALUENAME "PrintStickySettings"
          ITEMLIST
            NAME !!PrintStickySettings_EnableAll_DropDown VALUE NUMERIC 0
            NAME !!PrintStickySettings_DisableAll_DropDown VALUE NUMERIC 1
            NAME !!PrintStickySettings_DisablePdf_DropDown VALUE NUMERIC 2
            NAME !!PrintStickySettings_DisableWebpage_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Extensions_Category
      POLICY !!ExtensionInstallBlocklist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionInstallBlocklist_Explain

        PART !!ExtensionInstallBlocklist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ExtensionInstallBlocklist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ExtensionInstallAllowlist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionInstallAllowlist_Explain

        PART !!ExtensionInstallAllowlist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ExtensionInstallAllowlist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ExtensionInstallForcelist_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionInstallForcelist_Explain

        PART !!ExtensionInstallForcelist_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ExtensionInstallForcelist"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ExtensionInstallSources_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionInstallSources_Explain

        PART !!ExtensionInstallSources_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ExtensionInstallSources"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ExtensionAllowedTypes_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionAllowedTypes_Explain

        PART !!ExtensionAllowedTypes_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\ExtensionAllowedTypes"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!ExtensionSettings_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ExtensionSettings_Explain

        PART !!ExtensionSettings_Part  EDITTEXT
          VALUENAME "ExtensionSettings"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!BlockExternalExtensions_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!BlockExternalExtensions_Explain
        VALUENAME "BlockExternalExtensions"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    POLICY !!AADWebSiteSSOUsingThisProfileEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!AADWebSiteSSOUsingThisProfileEnabled_Explain
      VALUENAME "AADWebSiteSSOUsingThisProfileEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AccessibilityImageLabelsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!AccessibilityImageLabelsEnabled_Explain
      VALUENAME "AccessibilityImageLabelsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AddressBarEditingEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!AddressBarEditingEnabled_Explain
      VALUENAME "AddressBarEditingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AddressBarMicrosoftSearchInBingProviderEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!AddressBarMicrosoftSearchInBingProviderEnabled_Explain
      VALUENAME "AddressBarMicrosoftSearchInBingProviderEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AdsSettingForIntrusiveAdsSites_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!AdsSettingForIntrusiveAdsSites_Explain

      PART !!AdsSettingForIntrusiveAdsSites_Part  DROPDOWNLIST
        VALUENAME "AdsSettingForIntrusiveAdsSites"
        ITEMLIST
          NAME !!AdsSettingForIntrusiveAdsSites_AllowAds_DropDown VALUE NUMERIC 1
          NAME !!AdsSettingForIntrusiveAdsSites_BlockAds_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!AdsTransparencyEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V100
      #endif
      EXPLAIN !!AdsTransparencyEnabled_Explain
      VALUENAME "AdsTransparencyEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowDeletingBrowserHistory_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AllowDeletingBrowserHistory_Explain
      VALUENAME "AllowDeletingBrowserHistory"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowFileSelectionDialogs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AllowFileSelectionDialogs_Explain
      VALUENAME "AllowFileSelectionDialogs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowGamesMenu_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!AllowGamesMenu_Explain
      VALUENAME "AllowGamesMenu"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowPopupsDuringPageUnload_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V78_V87
      #endif
      EXPLAIN !!AllowPopupsDuringPageUnload_Explain
      VALUENAME "AllowPopupsDuringPageUnload"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowSurfGame_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!AllowSurfGame_Explain
      VALUENAME "AllowSurfGame"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowSyncXHRInPageDismissal_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V79_V99
      #endif
      EXPLAIN !!AllowSyncXHRInPageDismissal_Explain
      VALUENAME "AllowSyncXHRInPageDismissal"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AllowTokenBindingForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!AllowTokenBindingForUrls_Explain

      PART !!AllowTokenBindingForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AllowTokenBindingForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!AllowTrackingForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!AllowTrackingForUrls_Explain

      PART !!AllowTrackingForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AllowTrackingForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!AlternateErrorPagesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!AlternateErrorPagesEnabled_Explain
      VALUENAME "AlternateErrorPagesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AlwaysOpenPdfExternally_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AlwaysOpenPdfExternally_Explain
      VALUENAME "AlwaysOpenPdfExternally"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AmbientAuthenticationInPrivateModesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!AmbientAuthenticationInPrivateModesEnabled_Explain

      PART !!AmbientAuthenticationInPrivateModesEnabled_Part  DROPDOWNLIST
        VALUENAME "AmbientAuthenticationInPrivateModesEnabled"
        ITEMLIST
          NAME !!AmbientAuthenticationInPrivateModesEnabled_RegularOnly_DropDown VALUE NUMERIC 0
          NAME !!AmbientAuthenticationInPrivateModesEnabled_InPrivateAndRegular_DropDown VALUE NUMERIC 1
          NAME !!AmbientAuthenticationInPrivateModesEnabled_GuestAndRegular_DropDown VALUE NUMERIC 2
          NAME !!AmbientAuthenticationInPrivateModesEnabled_All_DropDown VALUE NUMERIC 3
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!AppCacheForceEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V84_V96
      #endif
      EXPLAIN !!AppCacheForceEnabled_Explain
      VALUENAME "AppCacheForceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ApplicationLocaleValue_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ApplicationLocaleValue_Explain

      PART !!ApplicationLocaleValue_Part  EDITTEXT
        VALUENAME "ApplicationLocaleValue"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!AudioCaptureAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AudioCaptureAllowed_Explain
      VALUENAME "AudioCaptureAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AudioCaptureAllowedUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AudioCaptureAllowedUrls_Explain

      PART !!AudioCaptureAllowedUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AudioCaptureAllowedUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!AudioProcessHighPriorityEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!AudioProcessHighPriorityEnabled_Explain
      VALUENAME "AudioProcessHighPriorityEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AudioSandboxEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!AudioSandboxEnabled_Explain
      VALUENAME "AudioSandboxEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutoImportAtFirstRun_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AutoImportAtFirstRun_Explain

      PART !!AutoImportAtFirstRun_Part  DROPDOWNLIST
        VALUENAME "AutoImportAtFirstRun"
        ITEMLIST
          NAME !!AutoImportAtFirstRun_FromDefaultBrowser_DropDown VALUE NUMERIC 0
          NAME !!AutoImportAtFirstRun_FromInternetExplorer_DropDown VALUE NUMERIC 1
          NAME !!AutoImportAtFirstRun_FromGoogleChrome_DropDown VALUE NUMERIC 2
          NAME !!AutoImportAtFirstRun_FromSafari_DropDown VALUE NUMERIC 3
          NAME !!AutoImportAtFirstRun_DisabledAutoImport_DropDown VALUE NUMERIC 4
          NAME !!AutoImportAtFirstRun_FromMozillaFirefox_DropDown VALUE NUMERIC 5
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!AutoLaunchProtocolsComponentEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!AutoLaunchProtocolsComponentEnabled_Explain
      VALUENAME "AutoLaunchProtocolsComponentEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutoLaunchProtocolsFromOrigins_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!AutoLaunchProtocolsFromOrigins_Explain

      PART !!AutoLaunchProtocolsFromOrigins_Part  EDITTEXT
        VALUENAME "AutoLaunchProtocolsFromOrigins"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!AutoOpenAllowedForURLs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!AutoOpenAllowedForURLs_Explain

      PART !!AutoOpenAllowedForURLs_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AutoOpenAllowedForURLs"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!AutoOpenFileTypes_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!AutoOpenFileTypes_Explain

      PART !!AutoOpenFileTypes_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AutoOpenFileTypes"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!AutofillAddressEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AutofillAddressEnabled_Explain
      VALUENAME "AutofillAddressEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutofillCreditCardEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AutofillCreditCardEnabled_Explain
      VALUENAME "AutofillCreditCardEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutomaticHttpsDefault_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!AutomaticHttpsDefault_Explain

      PART !!AutomaticHttpsDefault_Part  DROPDOWNLIST
        VALUENAME "AutomaticHttpsDefault"
        ITEMLIST
          NAME !!AutomaticHttpsDefault_DisableAutomaticHttps_DropDown VALUE NUMERIC 0
          NAME !!AutomaticHttpsDefault_UpgradeCapableDomains_DropDown VALUE NUMERIC 1
          NAME !!AutomaticHttpsDefault_AlwaysUpgrade_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!AutoplayAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!AutoplayAllowed_Explain
      VALUENAME "AutoplayAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutoplayAllowlist_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!AutoplayAllowlist_Explain

      PART !!AutoplayAllowlist_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\AutoplayAllowlist"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!BackgroundModeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BackgroundModeEnabled_Explain
      VALUENAME "BackgroundModeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BackgroundTemplateListUpdatesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!BackgroundTemplateListUpdatesEnabled_Explain
      VALUENAME "BackgroundTemplateListUpdatesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BingAdsSuppression_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!BingAdsSuppression_Explain
      VALUENAME "BingAdsSuppression"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BlockThirdPartyCookies_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BlockThirdPartyCookies_Explain
      VALUENAME "BlockThirdPartyCookies"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!FavoritesBarEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!FavoritesBarEnabled_Explain
      VALUENAME "FavoritesBarEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BrowserAddProfileEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BrowserAddProfileEnabled_Explain
      VALUENAME "BrowserAddProfileEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BrowserGuestModeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BrowserGuestModeEnabled_Explain
      VALUENAME "BrowserGuestModeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BrowserLegacyExtensionPointsBlockingEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!BrowserLegacyExtensionPointsBlockingEnabled_Explain
      VALUENAME "BrowserLegacyExtensionPointsBlockingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BrowserNetworkTimeQueriesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BrowserNetworkTimeQueriesEnabled_Explain
      VALUENAME "BrowserNetworkTimeQueriesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BrowserSignin_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BrowserSignin_Explain

      PART !!BrowserSignin_Part  DROPDOWNLIST
        VALUENAME "BrowserSignin"
        ITEMLIST
          NAME !!BrowserSignin_Disable_DropDown VALUE NUMERIC 0
          NAME !!BrowserSignin_Enable_DropDown VALUE NUMERIC 1
          NAME !!BrowserSignin_Force_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!BrowsingDataLifetime_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!BrowsingDataLifetime_Explain

      PART !!BrowsingDataLifetime_Part  EDITTEXT
        VALUENAME "BrowsingDataLifetime"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!BuiltInDnsClientEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BuiltInDnsClientEnabled_Explain
      VALUENAME "BuiltInDnsClientEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!CECPQ2Enabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!CECPQ2Enabled_Explain
      VALUENAME "CECPQ2Enabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!CORSNonWildcardRequestHeadersSupport_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!CORSNonWildcardRequestHeadersSupport_Explain
      VALUENAME "CORSNonWildcardRequestHeadersSupport"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!CertificateTransparencyEnforcementDisabledForCas_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!CertificateTransparencyEnforcementDisabledForCas_Explain

      PART !!CertificateTransparencyEnforcementDisabledForCas_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\CertificateTransparencyEnforcementDisabledForCas"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!CertificateTransparencyEnforcementDisabledForLegacyCas_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!CertificateTransparencyEnforcementDisabledForLegacyCas_Explain

      PART !!CertificateTransparencyEnforcementDisabledForLegacyCas_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\CertificateTransparencyEnforcementDisabledForLegacyCas"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!CertificateTransparencyEnforcementDisabledForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!CertificateTransparencyEnforcementDisabledForUrls_Explain

      PART !!CertificateTransparencyEnforcementDisabledForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\CertificateTransparencyEnforcementDisabledForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!ClearBrowsingDataOnExit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!ClearBrowsingDataOnExit_Explain
      VALUENAME "ClearBrowsingDataOnExit"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ClearCachedImagesAndFilesOnExit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!ClearCachedImagesAndFilesOnExit_Explain
      VALUENAME "ClearCachedImagesAndFilesOnExit"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ClickOnceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!ClickOnceEnabled_Explain
      VALUENAME "ClickOnceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!CollectionsServicesAndExportsBlockList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!CollectionsServicesAndExportsBlockList_Explain

      PART !!CollectionsServicesAndExportsBlockList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\CollectionsServicesAndExportsBlockList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!CommandLineFlagSecurityWarningsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!CommandLineFlagSecurityWarningsEnabled_Explain
      VALUENAME "CommandLineFlagSecurityWarningsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ComponentUpdatesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ComponentUpdatesEnabled_Explain
      VALUENAME "ComponentUpdatesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ConfigureDoNotTrack_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ConfigureDoNotTrack_Explain
      VALUENAME "ConfigureDoNotTrack"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ConfigureFriendlyURLFormat_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!ConfigureFriendlyURLFormat_Explain

      PART !!ConfigureFriendlyURLFormat_Part  DROPDOWNLIST
        VALUENAME "ConfigureFriendlyURLFormat"
        ITEMLIST
          NAME !!ConfigureFriendlyURLFormat_PlainText_DropDown VALUE NUMERIC 1
          NAME !!ConfigureFriendlyURLFormat_TitledHyperlink_DropDown VALUE NUMERIC 3
          NAME !!ConfigureFriendlyURLFormat_WebPreview_DropDown VALUE NUMERIC 4
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ConfigureKeyboardShortcuts_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!ConfigureKeyboardShortcuts_Explain

      PART !!ConfigureKeyboardShortcuts_Part  EDITTEXT
        VALUENAME "ConfigureKeyboardShortcuts"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!ConfigureOnPremisesAccountAutoSignIn_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ConfigureOnPremisesAccountAutoSignIn_Explain

      PART !!ConfigureOnPremisesAccountAutoSignIn_Part  DROPDOWNLIST
        VALUENAME "ConfigureOnPremisesAccountAutoSignIn"
        ITEMLIST
          NAME !!ConfigureOnPremisesAccountAutoSignIn_Disabled_DropDown VALUE NUMERIC 0
          NAME !!ConfigureOnPremisesAccountAutoSignIn_SignInAndMakeDomainAccountNonRemovable_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ConfigureOnlineTextToSpeech_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ConfigureOnlineTextToSpeech_Explain
      VALUENAME "ConfigureOnlineTextToSpeech"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ConfigureShare_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!ConfigureShare_Explain

      PART !!ConfigureShare_Part  DROPDOWNLIST
        VALUENAME "ConfigureShare"
        ITEMLIST
          NAME !!ConfigureShare_ShareAllowed_DropDown VALUE NUMERIC 0
          NAME !!ConfigureShare_ShareDisallowed_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ConfigureViewInFileExplorer_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!ConfigureViewInFileExplorer_Explain

      PART !!ConfigureViewInFileExplorer_Part  EDITTEXT
        VALUENAME "ConfigureViewInFileExplorer"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!CrossOriginWebAssemblyModuleSharingEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V95_V98
      #endif
      EXPLAIN !!CrossOriginWebAssemblyModuleSharingEnabled_Explain
      VALUENAME "CrossOriginWebAssemblyModuleSharingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!CustomHelpLink_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!CustomHelpLink_Explain

      PART !!CustomHelpLink_Part  EDITTEXT
        VALUENAME "CustomHelpLink"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DNSInterceptionChecksEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!DNSInterceptionChecksEnabled_Explain
      VALUENAME "DNSInterceptionChecksEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DefaultBrowserSettingEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_ONLY_V77
      #endif
      EXPLAIN !!DefaultBrowserSettingEnabled_Explain
      VALUENAME "DefaultBrowserSettingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DefaultSearchProviderContextMenuAccessAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!DefaultSearchProviderContextMenuAccessAllowed_Explain
      VALUENAME "DefaultSearchProviderContextMenuAccessAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DefaultSensorsSetting_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!DefaultSensorsSetting_Explain

      PART !!DefaultSensorsSetting_Part  DROPDOWNLIST
        VALUENAME "DefaultSensorsSetting"
        ITEMLIST
          NAME !!DefaultSensorsSetting_AllowSensors_DropDown VALUE NUMERIC 1
          NAME !!DefaultSensorsSetting_BlockSensors_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DefaultSerialGuardSetting_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!DefaultSerialGuardSetting_Explain

      PART !!DefaultSerialGuardSetting_Part  DROPDOWNLIST
        VALUENAME "DefaultSerialGuardSetting"
        ITEMLIST
          NAME !!DefaultSerialGuardSetting_BlockSerial_DropDown VALUE NUMERIC 2
          NAME !!DefaultSerialGuardSetting_AskSerial_DropDown VALUE NUMERIC 3
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DefinePreferredLanguages_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!DefinePreferredLanguages_Explain

      PART !!DefinePreferredLanguages_Part  EDITTEXT
        VALUENAME "DefinePreferredLanguages"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DelayNavigationsForInitialSiteListDownload_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V84
      #endif
      EXPLAIN !!DelayNavigationsForInitialSiteListDownload_Explain

      PART !!DelayNavigationsForInitialSiteListDownload_Part  DROPDOWNLIST
        VALUENAME "DelayNavigationsForInitialSiteListDownload"
        ITEMLIST
          NAME !!DelayNavigationsForInitialSiteListDownload_None_DropDown VALUE NUMERIC 0
          NAME !!DelayNavigationsForInitialSiteListDownload_All_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DeleteDataOnMigration_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!DeleteDataOnMigration_Explain
      VALUENAME "DeleteDataOnMigration"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DeveloperToolsAvailability_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DeveloperToolsAvailability_Explain

      PART !!DeveloperToolsAvailability_Part  DROPDOWNLIST
        VALUENAME "DeveloperToolsAvailability"
        ITEMLIST
          NAME !!DeveloperToolsAvailability_DeveloperToolsDisallowedForForceInstalledExtensions_DropDown VALUE NUMERIC 0
          NAME !!DeveloperToolsAvailability_DeveloperToolsAllowed_DropDown VALUE NUMERIC 1
          NAME !!DeveloperToolsAvailability_DeveloperToolsDisallowed_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DiagnosticData_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_ONLY_V86
      #endif
      EXPLAIN !!DiagnosticData_Explain

      PART !!DiagnosticData_Part  DROPDOWNLIST
        VALUENAME "DiagnosticData"
        ITEMLIST
          NAME !!DiagnosticData_Off_DropDown VALUE NUMERIC 0
          NAME !!DiagnosticData_RequiredData_DropDown VALUE NUMERIC 1
          NAME !!DiagnosticData_OptionalData_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DirectInvokeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!DirectInvokeEnabled_Explain
      VALUENAME "DirectInvokeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!Disable3DAPIs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!Disable3DAPIs_Explain
      VALUENAME "Disable3DAPIs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DisableScreenshots_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DisableScreenshots_Explain
      VALUENAME "DisableScreenshots"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DiskCacheDir_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DiskCacheDir_Explain

      PART !!DiskCacheDir_Part  EDITTEXT
        VALUENAME "DiskCacheDir"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DiskCacheSize_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DiskCacheSize_Explain

      PART !!DiskCacheSize_Part  NUMERIC
        VALUENAME "DiskCacheSize"
        MIN 0 MAX 2000000000
      END PART
    END POLICY

    POLICY !!DisplayCapturePermissionsPolicyEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!DisplayCapturePermissionsPolicyEnabled_Explain
      VALUENAME "DisplayCapturePermissionsPolicyEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DnsOverHttpsMode_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!DnsOverHttpsMode_Explain

      PART !!DnsOverHttpsMode_Part  DROPDOWNLIST
        VALUENAME "DnsOverHttpsMode"
        ITEMLIST
          NAME !!DnsOverHttpsMode_off_DropDown VALUE "off"
          NAME !!DnsOverHttpsMode_automatic_DropDown VALUE "automatic"
          NAME !!DnsOverHttpsMode_secure_DropDown VALUE "secure"
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!DnsOverHttpsTemplates_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!DnsOverHttpsTemplates_Explain

      PART !!DnsOverHttpsTemplates_Part  EDITTEXT
        VALUENAME "DnsOverHttpsTemplates"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DoNotSilentlyBlockProtocolsFromOrigins_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!DoNotSilentlyBlockProtocolsFromOrigins_Explain

      PART !!DoNotSilentlyBlockProtocolsFromOrigins_Part  EDITTEXT
        VALUENAME "DoNotSilentlyBlockProtocolsFromOrigins"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DownloadDirectory_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DownloadDirectory_Explain

      PART !!DownloadDirectory_Part  EDITTEXT
        VALUENAME "DownloadDirectory"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DownloadRestrictions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DownloadRestrictions_Explain

      PART !!DownloadRestrictions_Part  DROPDOWNLIST
        VALUENAME "DownloadRestrictions"
        ITEMLIST
          NAME !!DownloadRestrictions_DefaultDownloadSecurity_DropDown VALUE NUMERIC 0
          NAME !!DownloadRestrictions_BlockDangerousDownloads_DropDown VALUE NUMERIC 1
          NAME !!DownloadRestrictions_BlockPotentiallyDangerousDownloads_DropDown VALUE NUMERIC 2
          NAME !!DownloadRestrictions_BlockAllDownloads_DropDown VALUE NUMERIC 3
          NAME !!DownloadRestrictions_BlockMaliciousDownloads_DropDown VALUE NUMERIC 4
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!EdgeAssetDeliveryServiceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!EdgeAssetDeliveryServiceEnabled_Explain
      VALUENAME "EdgeAssetDeliveryServiceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeCollectionsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!EdgeCollectionsEnabled_Explain
      VALUENAME "EdgeCollectionsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeDiscoverEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!EdgeDiscoverEnabled_Explain
      VALUENAME "EdgeDiscoverEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeEnhanceImagesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!EdgeEnhanceImagesEnabled_Explain
      VALUENAME "EdgeEnhanceImagesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeFollowEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!EdgeFollowEnabled_Explain
      VALUENAME "EdgeFollowEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeShoppingAssistantEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!EdgeShoppingAssistantEnabled_Explain
      VALUENAME "EdgeShoppingAssistantEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EditFavoritesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!EditFavoritesEnabled_Explain
      VALUENAME "EditFavoritesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EnableDeprecatedWebPlatformFeatures_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V86
      #endif
      EXPLAIN !!EnableDeprecatedWebPlatformFeatures_Explain

      PART !!EnableDeprecatedWebPlatformFeatures_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\EnableDeprecatedWebPlatformFeatures"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!EnableDomainActionsDownload_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V84
      #endif
      EXPLAIN !!EnableDomainActionsDownload_Explain
      VALUENAME "EnableDomainActionsDownload"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EnableOnlineRevocationChecks_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!EnableOnlineRevocationChecks_Explain
      VALUENAME "EnableOnlineRevocationChecks"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EnableSha1ForLocalAnchors_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V85_V91
      #endif
      EXPLAIN !!EnableSha1ForLocalAnchors_Explain
      VALUENAME "EnableSha1ForLocalAnchors"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EnhanceSecurityMode_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!EnhanceSecurityMode_Explain

      PART !!EnhanceSecurityMode_Part  DROPDOWNLIST
        VALUENAME "EnhanceSecurityMode"
        ITEMLIST
          NAME !!EnhanceSecurityMode_StandardMode_DropDown VALUE NUMERIC 0
          NAME !!EnhanceSecurityMode_BalancedMode_DropDown VALUE NUMERIC 1
          NAME !!EnhanceSecurityMode_StrictMode_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!EnhanceSecurityModeBypassListDomains_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!EnhanceSecurityModeBypassListDomains_Explain

      PART !!EnhanceSecurityModeBypassListDomains_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\EnhanceSecurityModeBypassListDomains"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!EnhanceSecurityModeEnforceListDomains_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!EnhanceSecurityModeEnforceListDomains_Explain

      PART !!EnhanceSecurityModeEnforceListDomains_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\EnhanceSecurityModeEnforceListDomains"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!EnterpriseHardwarePlatformAPIEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!EnterpriseHardwarePlatformAPIEnabled_Explain
      VALUENAME "EnterpriseHardwarePlatformAPIEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EnterpriseModeSiteListManagerAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!EnterpriseModeSiteListManagerAllowed_Explain
      VALUENAME "EnterpriseModeSiteListManagerAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ExemptDomainFileTypePairsFromFileTypeDownloadWarnings_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!ExemptDomainFileTypePairsFromFileTypeDownloadWarnings_Explain

      PART !!ExemptDomainFileTypePairsFromFileTypeDownloadWarnings_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\ExemptDomainFileTypePairsFromFileTypeDownloadWarnings"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!ExperimentationAndConfigurationServiceControl_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ExperimentationAndConfigurationServiceControl_Explain

      PART !!ExperimentationAndConfigurationServiceControl_Part  DROPDOWNLIST
        VALUENAME "ExperimentationAndConfigurationServiceControl"
        ITEMLIST
          NAME !!ExperimentationAndConfigurationServiceControl_FullMode_DropDown VALUE NUMERIC 2
          NAME !!ExperimentationAndConfigurationServiceControl_ConfigurationsOnlyMode_DropDown VALUE NUMERIC 1
          NAME !!ExperimentationAndConfigurationServiceControl_RestrictedMode_DropDown VALUE NUMERIC 0
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ExplicitlyAllowedNetworkPorts_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V91
      #endif
      EXPLAIN !!ExplicitlyAllowedNetworkPorts_Explain

      PART !!ExplicitlyAllowedNetworkPorts_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\ExplicitlyAllowedNetworkPorts"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!ExternalProtocolDialogShowAlwaysOpenCheckbox_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!ExternalProtocolDialogShowAlwaysOpenCheckbox_Explain
      VALUENAME "ExternalProtocolDialogShowAlwaysOpenCheckbox"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!FamilySafetySettingsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!FamilySafetySettingsEnabled_Explain
      VALUENAME "FamilySafetySettingsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!FetchKeepaliveDurationSecondsOnShutdown_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V90
      #endif
      EXPLAIN !!FetchKeepaliveDurationSecondsOnShutdown_Explain

      PART !!FetchKeepaliveDurationSecondsOnShutdown_Part  NUMERIC
        VALUENAME "FetchKeepaliveDurationSecondsOnShutdown"
        MIN 0 MAX 5
      END PART
    END POLICY

    POLICY !!ForceBingSafeSearch_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ForceBingSafeSearch_Explain

      PART !!ForceBingSafeSearch_Part  DROPDOWNLIST
        VALUENAME "ForceBingSafeSearch"
        ITEMLIST
          NAME !!ForceBingSafeSearch_BingSafeSearchNoRestrictionsMode_DropDown VALUE NUMERIC 0
          NAME !!ForceBingSafeSearch_BingSafeSearchModerateMode_DropDown VALUE NUMERIC 1
          NAME !!ForceBingSafeSearch_BingSafeSearchStrictMode_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ForceCertificatePromptsOnMultipleMatches_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ForceCertificatePromptsOnMultipleMatches_Explain
      VALUENAME "ForceCertificatePromptsOnMultipleMatches"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceEphemeralProfiles_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ForceEphemeralProfiles_Explain
      VALUENAME "ForceEphemeralProfiles"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceGoogleSafeSearch_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ForceGoogleSafeSearch_Explain
      VALUENAME "ForceGoogleSafeSearch"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceLegacyDefaultReferrerPolicy_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V81_V88
      #endif
      EXPLAIN !!ForceLegacyDefaultReferrerPolicy_Explain
      VALUENAME "ForceLegacyDefaultReferrerPolicy"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceMajorVersionToMinorPositionInUserAgent_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!ForceMajorVersionToMinorPositionInUserAgent_Explain

      PART !!ForceMajorVersionToMinorPositionInUserAgent_Part  DROPDOWNLIST
        VALUENAME "ForceMajorVersionToMinorPositionInUserAgent"
        ITEMLIST
          NAME !!ForceMajorVersionToMinorPositionInUserAgent_Default_DropDown VALUE NUMERIC 0
          NAME !!ForceMajorVersionToMinorPositionInUserAgent_ForceDisabled_DropDown VALUE NUMERIC 1
          NAME !!ForceMajorVersionToMinorPositionInUserAgent_ForceEnabled_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ForceNetworkInProcess_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V78_V83
      #endif
      EXPLAIN !!ForceNetworkInProcess_Explain
      VALUENAME "ForceNetworkInProcess"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceSync_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!ForceSync_Explain
      VALUENAME "ForceSync"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ForceSyncTypes_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!ForceSyncTypes_Explain

      PART !!ForceSyncTypes_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\ForceSyncTypes"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!ForceYouTubeRestrict_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ForceYouTubeRestrict_Explain

      PART !!ForceYouTubeRestrict_Part  DROPDOWNLIST
        VALUENAME "ForceYouTubeRestrict"
        ITEMLIST
          NAME !!ForceYouTubeRestrict_Off_DropDown VALUE NUMERIC 0
          NAME !!ForceYouTubeRestrict_Moderate_DropDown VALUE NUMERIC 1
          NAME !!ForceYouTubeRestrict_Strict_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!FullscreenAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!FullscreenAllowed_Explain
      VALUENAME "FullscreenAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!GloballyScopeHTTPAuthCacheEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!GloballyScopeHTTPAuthCacheEnabled_Explain
      VALUENAME "GloballyScopeHTTPAuthCacheEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!GoToIntranetSiteForSingleWordEntryInAddressBar_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!GoToIntranetSiteForSingleWordEntryInAddressBar_Explain
      VALUENAME "GoToIntranetSiteForSingleWordEntryInAddressBar"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HSTSPolicyBypassList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!HSTSPolicyBypassList_Explain

      PART !!HSTSPolicyBypassList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\HSTSPolicyBypassList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!HardwareAccelerationModeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!HardwareAccelerationModeEnabled_Explain
      VALUENAME "HardwareAccelerationModeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HeadlessModeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!HeadlessModeEnabled_Explain
      VALUENAME "HeadlessModeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HideFirstRunExperience_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!HideFirstRunExperience_Explain
      VALUENAME "HideFirstRunExperience"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HideInternetExplorerRedirectUXForIncompatibleSitesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!HideInternetExplorerRedirectUXForIncompatibleSitesEnabled_Explain
      VALUENAME "HideInternetExplorerRedirectUXForIncompatibleSitesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HideRestoreDialogEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V100
      #endif
      EXPLAIN !!HideRestoreDialogEnabled_Explain
      VALUENAME "HideRestoreDialogEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HubsSidebarEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!HubsSidebarEnabled_Explain
      VALUENAME "HubsSidebarEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportAutofillFormData_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportAutofillFormData_Explain
      VALUENAME "ImportAutofillFormData"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportFavorites_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportFavorites_Explain
      VALUENAME "ImportFavorites"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportBrowserSettings_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!ImportBrowserSettings_Explain
      VALUENAME "ImportBrowserSettings"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportCookies_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportCookies_Explain
      VALUENAME "ImportCookies"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportExtensions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportExtensions_Explain
      VALUENAME "ImportExtensions"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportHistory_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportHistory_Explain
      VALUENAME "ImportHistory"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportHomepage_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportHomepage_Explain
      VALUENAME "ImportHomepage"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportOpenTabs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!ImportOpenTabs_Explain
      VALUENAME "ImportOpenTabs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportPaymentInfo_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportPaymentInfo_Explain
      VALUENAME "ImportPaymentInfo"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportSavedPasswords_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportSavedPasswords_Explain
      VALUENAME "ImportSavedPasswords"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportSearchEngine_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportSearchEngine_Explain
      VALUENAME "ImportSearchEngine"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportShortcuts_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportShortcuts_Explain
      VALUENAME "ImportShortcuts"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportStartupPageSettings_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V91
      #endif
      EXPLAIN !!ImportStartupPageSettings_Explain
      VALUENAME "ImportStartupPageSettings"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InAppSupportEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!InAppSupportEnabled_Explain
      VALUENAME "InAppSupportEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InPrivateModeAvailability_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!InPrivateModeAvailability_Explain

      PART !!InPrivateModeAvailability_Part  DROPDOWNLIST
        VALUENAME "InPrivateModeAvailability"
        ITEMLIST
          NAME !!IncognitoModeAvailability_Enabled_DropDown VALUE NUMERIC 0
          NAME !!IncognitoModeAvailability_Disabled_DropDown VALUE NUMERIC 1
          NAME !!IncognitoModeAvailability_Forced_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!InsecureFormsWarningsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!InsecureFormsWarningsEnabled_Explain
      VALUENAME "InsecureFormsWarningsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!IntensiveWakeUpThrottlingEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!IntensiveWakeUpThrottlingEnabled_Explain
      VALUENAME "IntensiveWakeUpThrottlingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationCloudNeutralSitesReporting_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!InternetExplorerIntegrationCloudNeutralSitesReporting_Explain

      PART !!InternetExplorerIntegrationCloudNeutralSitesReporting_Part  EDITTEXT
        VALUENAME "InternetExplorerIntegrationCloudNeutralSitesReporting"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationCloudSiteList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!InternetExplorerIntegrationCloudSiteList_Explain

      PART !!InternetExplorerIntegrationCloudSiteList_Part  EDITTEXT
        VALUENAME "InternetExplorerIntegrationCloudSiteList"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationCloudUserSitesReporting_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!InternetExplorerIntegrationCloudUserSitesReporting_Explain

      PART !!InternetExplorerIntegrationCloudUserSitesReporting_Part  EDITTEXT
        VALUENAME "InternetExplorerIntegrationCloudUserSitesReporting"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationComplexNavDataTypes_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!InternetExplorerIntegrationComplexNavDataTypes_Explain

      PART !!InternetExplorerIntegrationComplexNavDataTypes_Part  DROPDOWNLIST
        VALUENAME "InternetExplorerIntegrationComplexNavDataTypes"
        ITEMLIST
          NAME !!InternetExplorerIntegrationComplexNavDataTypes_IncludeNone_DropDown VALUE NUMERIC 0
          NAME !!InternetExplorerIntegrationComplexNavDataTypes_IncludeFormDataOnly_DropDown VALUE NUMERIC 1
          NAME !!InternetExplorerIntegrationComplexNavDataTypes_IncludeHeadersOnly_DropDown VALUE NUMERIC 2
          NAME !!InternetExplorerIntegrationComplexNavDataTypes_IncludeFormDataAndHeaders_DropDown VALUE NUMERIC 3
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationEnhancedHangDetection_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V84
      #endif
      EXPLAIN !!InternetExplorerIntegrationEnhancedHangDetection_Explain

      PART !!InternetExplorerIntegrationEnhancedHangDetection_Part  DROPDOWNLIST
        VALUENAME "InternetExplorerIntegrationEnhancedHangDetection"
        ITEMLIST
          NAME !!InternetExplorerIntegrationEnhancedHangDetection_Disabled_DropDown VALUE NUMERIC 0
          NAME !!InternetExplorerIntegrationEnhancedHangDetection_Enabled_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationLevel_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!InternetExplorerIntegrationLevel_Explain

      PART !!InternetExplorerIntegrationLevel_Part  DROPDOWNLIST
        VALUENAME "InternetExplorerIntegrationLevel"
        ITEMLIST
          NAME !!InternetExplorerIntegrationLevel_None_DropDown VALUE NUMERIC 0
          NAME !!InternetExplorerIntegrationLevel_IEMode_DropDown VALUE NUMERIC 1
          NAME !!InternetExplorerIntegrationLevel_NeedIE_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationLocalFileAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!InternetExplorerIntegrationLocalFileAllowed_Explain
      VALUENAME "InternetExplorerIntegrationLocalFileAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationLocalFileExtensionAllowList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!InternetExplorerIntegrationLocalFileExtensionAllowList_Explain

      PART !!InternetExplorerIntegrationLocalFileExtensionAllowList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\InternetExplorerIntegrationLocalFileExtensionAllowList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationLocalFileShowContextMenu_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!InternetExplorerIntegrationLocalFileShowContextMenu_Explain
      VALUENAME "InternetExplorerIntegrationLocalFileShowContextMenu"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationLocalSiteListExpirationDays_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!InternetExplorerIntegrationLocalSiteListExpirationDays_Explain

      PART !!InternetExplorerIntegrationLocalSiteListExpirationDays_Part  NUMERIC
        VALUENAME "InternetExplorerIntegrationLocalSiteListExpirationDays"
        MIN 0 MAX 90
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationReloadInIEModeAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!InternetExplorerIntegrationReloadInIEModeAllowed_Explain
      VALUENAME "InternetExplorerIntegrationReloadInIEModeAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationSiteList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!InternetExplorerIntegrationSiteList_Explain

      PART !!InternetExplorerIntegrationSiteList_Part  EDITTEXT
        VALUENAME "InternetExplorerIntegrationSiteList"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationSiteListRefreshInterval_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!InternetExplorerIntegrationSiteListRefreshInterval_Explain

      PART !!InternetExplorerIntegrationSiteListRefreshInterval_Part  NUMERIC
        VALUENAME "InternetExplorerIntegrationSiteListRefreshInterval"
        MIN 30 MAX 2000000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationSiteRedirect_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!InternetExplorerIntegrationSiteRedirect_Explain

      PART !!InternetExplorerIntegrationSiteRedirect_Part  DROPDOWNLIST
        VALUENAME "InternetExplorerIntegrationSiteRedirect"
        ITEMLIST
          NAME !!InternetExplorerIntegrationSiteRedirect_Default_DropDown VALUE NUMERIC 0
          NAME !!InternetExplorerIntegrationSiteRedirect_AutomaticNavigationsOnly_DropDown VALUE NUMERIC 1
          NAME !!InternetExplorerIntegrationSiteRedirect_AllInPageNavigations_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationTestingAllowed_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V86_V94
      #endif
      EXPLAIN !!InternetExplorerIntegrationTestingAllowed_Explain
      VALUENAME "InternetExplorerIntegrationTestingAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationWindowOpenHeightAdjustment_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!InternetExplorerIntegrationWindowOpenHeightAdjustment_Explain

      PART !!InternetExplorerIntegrationWindowOpenHeightAdjustment_Part  NUMERIC
        VALUENAME "InternetExplorerIntegrationWindowOpenHeightAdjustment"
        MIN 0 MAX 2000000000
      END PART
    END POLICY

    POLICY !!InternetExplorerIntegrationWindowOpenWidthAdjustment_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!InternetExplorerIntegrationWindowOpenWidthAdjustment_Explain

      PART !!InternetExplorerIntegrationWindowOpenWidthAdjustment_Part  NUMERIC
        VALUENAME "InternetExplorerIntegrationWindowOpenWidthAdjustment"
        MIN 0 MAX 2000000000
      END PART
    END POLICY

    POLICY !!InternetExplorerModeEnableSavePageAs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!InternetExplorerModeEnableSavePageAs_Explain
      VALUENAME "InternetExplorerModeEnableSavePageAs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerModeTabInEdgeModeAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!InternetExplorerModeTabInEdgeModeAllowed_Explain
      VALUENAME "InternetExplorerModeTabInEdgeModeAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerModeToolbarButtonEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!InternetExplorerModeToolbarButtonEnabled_Explain
      VALUENAME "InternetExplorerModeToolbarButtonEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!IntranetRedirectBehavior_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!IntranetRedirectBehavior_Explain

      PART !!IntranetRedirectBehavior_Part  DROPDOWNLIST
        VALUENAME "IntranetRedirectBehavior"
        ITEMLIST
          NAME !!IntranetRedirectBehavior_Default_DropDown VALUE NUMERIC 0
          NAME !!IntranetRedirectBehavior_DisableInterceptionChecksDisableInfobar_DropDown VALUE NUMERIC 1
          NAME !!IntranetRedirectBehavior_DisableInterceptionChecksEnableInfobar_DropDown VALUE NUMERIC 2
          NAME !!IntranetRedirectBehavior_EnableInterceptionChecksEnableInfobar_DropDown VALUE NUMERIC 3
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!IsolateOrigins_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!IsolateOrigins_Explain

      PART !!IsolateOrigins_Part  EDITTEXT
        VALUENAME "IsolateOrigins"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!LocalBrowserDataShareEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!LocalBrowserDataShareEnabled_Explain
      VALUENAME "LocalBrowserDataShareEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!LocalProvidersEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!LocalProvidersEnabled_Explain
      VALUENAME "LocalProvidersEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MSAWebSiteSSOUsingThisProfileAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!MSAWebSiteSSOUsingThisProfileAllowed_Explain
      VALUENAME "MSAWebSiteSSOUsingThisProfileAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ManagedFavorites_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ManagedFavorites_Explain

      PART !!ManagedFavorites_Part  EDITTEXT
        VALUENAME "ManagedFavorites"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!ManagedConfigurationPerOrigin_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V90
      #endif
      EXPLAIN !!ManagedConfigurationPerOrigin_Explain

      PART !!ManagedConfigurationPerOrigin_Part  EDITTEXT
        VALUENAME "ManagedConfigurationPerOrigin"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!ManagedSearchEngines_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ManagedSearchEngines_Explain

      PART !!ManagedSearchEngines_Part  EDITTEXT
        VALUENAME "ManagedSearchEngines"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!MathSolverEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V91
      #endif
      EXPLAIN !!MathSolverEnabled_Explain
      VALUENAME "MathSolverEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MaxConnectionsPerProxy_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!MaxConnectionsPerProxy_Explain

      PART !!MaxConnectionsPerProxy_Part  NUMERIC
        VALUENAME "MaxConnectionsPerProxy"
        MIN 0 MAX 2000000000
      END PART
    END POLICY

    POLICY !!MediaRouterCastAllowAllIPs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!MediaRouterCastAllowAllIPs_Explain
      VALUENAME "MediaRouterCastAllowAllIPs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MetricsReportingEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V88
      #endif
      EXPLAIN !!MetricsReportingEnabled_Explain
      VALUENAME "MetricsReportingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MicrosoftEdgeInsiderPromotionEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!MicrosoftEdgeInsiderPromotionEnabled_Explain
      VALUENAME "MicrosoftEdgeInsiderPromotionEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MicrosoftOfficeMenuEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V100
      #endif
      EXPLAIN !!MicrosoftOfficeMenuEnabled_Explain
      VALUENAME "MicrosoftOfficeMenuEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!NativeWindowOcclusionEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V84
      #endif
      EXPLAIN !!NativeWindowOcclusionEnabled_Explain
      VALUENAME "NativeWindowOcclusionEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!NavigationDelayForInitialSiteListDownloadTimeout_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V84
      #endif
      EXPLAIN !!NavigationDelayForInitialSiteListDownloadTimeout_Explain

      PART !!NavigationDelayForInitialSiteListDownloadTimeout_Part  NUMERIC
        VALUENAME "NavigationDelayForInitialSiteListDownloadTimeout"
        MIN 0 MAX 2000000000
      END PART
    END POLICY

    POLICY !!NetworkPredictionOptions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!NetworkPredictionOptions_Explain

      PART !!NetworkPredictionOptions_Part  DROPDOWNLIST
        VALUENAME "NetworkPredictionOptions"
        ITEMLIST
          NAME !!NetworkPredictionOptions_NetworkPredictionAlways_DropDown VALUE NUMERIC 0
          NAME !!NetworkPredictionOptions_NetworkPredictionWifiOnly_DropDown VALUE NUMERIC 1
          NAME !!NetworkPredictionOptions_NetworkPredictionNever_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!NonRemovableProfileEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!NonRemovableProfileEnabled_Explain
      VALUENAME "NonRemovableProfileEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!OverrideSecurityRestrictionsOnInsecureOrigin_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!OverrideSecurityRestrictionsOnInsecureOrigin_Explain

      PART !!OverrideSecurityRestrictionsOnInsecureOrigin_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\OverrideSecurityRestrictionsOnInsecureOrigin"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!PDFSecureMode_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V100
      #endif
      EXPLAIN !!PDFSecureMode_Explain
      VALUENAME "PDFSecureMode"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!PaymentMethodQueryEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!PaymentMethodQueryEnabled_Explain
      VALUENAME "PaymentMethodQueryEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!PersonalizationReportingEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!PersonalizationReportingEnabled_Explain
      VALUENAME "PersonalizationReportingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!PinningWizardAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!PinningWizardAllowed_Explain
      VALUENAME "PinningWizardAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ProactiveAuthEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V90
      #endif
      EXPLAIN !!ProactiveAuthEnabled_Explain
      VALUENAME "ProactiveAuthEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!PromotionalTabsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!PromotionalTabsEnabled_Explain
      VALUENAME "PromotionalTabsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!PromptForDownloadLocation_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!PromptForDownloadLocation_Explain
      VALUENAME "PromptForDownloadLocation"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!QuicAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!QuicAllowed_Explain
      VALUENAME "QuicAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!QuickViewOfficeFilesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V90
      #endif
      EXPLAIN !!QuickViewOfficeFilesEnabled_Explain
      VALUENAME "QuickViewOfficeFilesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RedirectSitesFromInternetExplorerPreventBHOInstall_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!RedirectSitesFromInternetExplorerPreventBHOInstall_Explain
      VALUENAME "RedirectSitesFromInternetExplorerPreventBHOInstall"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RedirectSitesFromInternetExplorerRedirectMode_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!RedirectSitesFromInternetExplorerRedirectMode_Explain

      PART !!RedirectSitesFromInternetExplorerRedirectMode_Part  DROPDOWNLIST
        VALUENAME "RedirectSitesFromInternetExplorerRedirectMode"
        ITEMLIST
          NAME !!RedirectSitesFromInternetExplorerRedirectMode_Disable_DropDown VALUE NUMERIC 0
          NAME !!RedirectSitesFromInternetExplorerRedirectMode_Sitelist_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!RelatedMatchesCloudServiceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!RelatedMatchesCloudServiceEnabled_Explain
      VALUENAME "RelatedMatchesCloudServiceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RelaunchNotification_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!RelaunchNotification_Explain

      PART !!RelaunchNotification_Part  DROPDOWNLIST
        VALUENAME "RelaunchNotification"
        ITEMLIST
          NAME !!RelaunchNotification_Recommended_DropDown VALUE NUMERIC 1
          NAME !!RelaunchNotification_Required_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!RelaunchNotificationPeriod_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!RelaunchNotificationPeriod_Explain

      PART !!RelaunchNotificationPeriod_Part  NUMERIC
        VALUENAME "RelaunchNotificationPeriod"
        MIN 3600000 MAX 2000000000
      END PART
    END POLICY

    POLICY !!RelaunchWindow_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!RelaunchWindow_Explain

      PART !!RelaunchWindow_Part  EDITTEXT
        VALUENAME "RelaunchWindow"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!RemoteDebuggingAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!RemoteDebuggingAllowed_Explain
      VALUENAME "RemoteDebuggingAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RendererAppContainerEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!RendererAppContainerEnabled_Explain
      VALUENAME "RendererAppContainerEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RendererCodeIntegrityEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!RendererCodeIntegrityEnabled_Explain
      VALUENAME "RendererCodeIntegrityEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RequireOnlineRevocationChecksForLocalAnchors_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!RequireOnlineRevocationChecksForLocalAnchors_Explain
      VALUENAME "RequireOnlineRevocationChecksForLocalAnchors"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ResolveNavigationErrorsUseWebService_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ResolveNavigationErrorsUseWebService_Explain
      VALUENAME "ResolveNavigationErrorsUseWebService"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RestrictSigninToPattern_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!RestrictSigninToPattern_Explain

      PART !!RestrictSigninToPattern_Part  EDITTEXT
        VALUENAME "RestrictSigninToPattern"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!RoamingProfileLocation_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!RoamingProfileLocation_Explain

      PART !!RoamingProfileLocation_Part  EDITTEXT
        VALUENAME "RoamingProfileLocation"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!RoamingProfileSupportEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!RoamingProfileSupportEnabled_Explain
      VALUENAME "RoamingProfileSupportEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!RunAllFlashInAllowMode_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V88
      #endif
      EXPLAIN !!RunAllFlashInAllowMode_Explain
      VALUENAME "RunAllFlashInAllowMode"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SSLErrorOverrideAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SSLErrorOverrideAllowed_Explain
      VALUENAME "SSLErrorOverrideAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SSLErrorOverrideAllowedForOrigins_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V90
      #endif
      EXPLAIN !!SSLErrorOverrideAllowedForOrigins_Explain

      PART !!SSLErrorOverrideAllowedForOrigins_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SSLErrorOverrideAllowedForOrigins"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SSLVersionMin_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SSLVersionMin_Explain

      PART !!SSLVersionMin_Part  DROPDOWNLIST
        VALUENAME "SSLVersionMin"
        ITEMLIST
          NAME !!SSLVersionMin_TLSv1_DropDown VALUE "tls1"
          NAME !!SSLVersionMin_TLSv1_1_DropDown VALUE "tls1.1"
          NAME !!SSLVersionMin_TLSv1_2_DropDown VALUE "tls1.2"
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!SandboxExternalProtocolBlocked_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!SandboxExternalProtocolBlocked_Explain
      VALUENAME "SandboxExternalProtocolBlocked"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SaveCookiesOnExit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!SaveCookiesOnExit_Explain

      PART !!SaveCookiesOnExit_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SaveCookiesOnExit"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SavingBrowserHistoryDisabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SavingBrowserHistoryDisabled_Explain
      VALUENAME "SavingBrowserHistoryDisabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ScreenCaptureAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!ScreenCaptureAllowed_Explain
      VALUENAME "ScreenCaptureAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ScrollToTextFragmentEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!ScrollToTextFragmentEnabled_Explain
      VALUENAME "ScrollToTextFragmentEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SearchSuggestEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SearchSuggestEnabled_Explain
      VALUENAME "SearchSuggestEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SecurityKeyPermitAttestation_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SecurityKeyPermitAttestation_Explain

      PART !!SecurityKeyPermitAttestation_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SecurityKeyPermitAttestation"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SendIntranetToInternetExplorer_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SendIntranetToInternetExplorer_Explain
      VALUENAME "SendIntranetToInternetExplorer"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SendSiteInfoToImproveServices_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V88
      #endif
      EXPLAIN !!SendSiteInfoToImproveServices_Explain
      VALUENAME "SendSiteInfoToImproveServices"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SensorsAllowedForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!SensorsAllowedForUrls_Explain

      PART !!SensorsAllowedForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SensorsAllowedForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SensorsBlockedForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!SensorsBlockedForUrls_Explain

      PART !!SensorsBlockedForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SensorsBlockedForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SerialAskForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!SerialAskForUrls_Explain

      PART !!SerialAskForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SerialAskForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SerialBlockedForUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!SerialBlockedForUrls_Explain

      PART !!SerialBlockedForUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SerialBlockedForUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SetTimeoutWithout1MsClampEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!SetTimeoutWithout1MsClampEnabled_Explain
      VALUENAME "SetTimeoutWithout1MsClampEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ShadowStackCrashRollbackBehavior_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!ShadowStackCrashRollbackBehavior_Explain

      PART !!ShadowStackCrashRollbackBehavior_Part  DROPDOWNLIST
        VALUENAME "ShadowStackCrashRollbackBehavior"
        ITEMLIST
          NAME !!ShadowStackCrashRollbackBehavior_Disable_DropDown VALUE NUMERIC 0
          NAME !!ShadowStackCrashRollbackBehavior_DisableUntilUpdate_DropDown VALUE NUMERIC 1
          NAME !!ShadowStackCrashRollbackBehavior_Enable_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!SharedArrayBufferUnrestrictedAccessAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!SharedArrayBufferUnrestrictedAccessAllowed_Explain
      VALUENAME "SharedArrayBufferUnrestrictedAccessAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SharedLinksEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!SharedLinksEnabled_Explain
      VALUENAME "SharedLinksEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ShowMicrosoftRewards_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!ShowMicrosoftRewards_Explain
      VALUENAME "ShowMicrosoftRewards"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ShowOfficeShortcutInFavoritesBar_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ShowOfficeShortcutInFavoritesBar_Explain
      VALUENAME "ShowOfficeShortcutInFavoritesBar"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ShowRecommendationsEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!ShowRecommendationsEnabled_Explain
      VALUENAME "ShowRecommendationsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SignedHTTPExchangeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!SignedHTTPExchangeEnabled_Explain
      VALUENAME "SignedHTTPExchangeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SitePerProcess_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SitePerProcess_Explain
      VALUENAME "SitePerProcess"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SiteSafetyServicesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!SiteSafetyServicesEnabled_Explain
      VALUENAME "SiteSafetyServicesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SmartActionsBlockList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!SmartActionsBlockList_Explain

      PART !!SmartActionsBlockList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SmartActionsBlockList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SpeechRecognitionEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!SpeechRecognitionEnabled_Explain
      VALUENAME "SpeechRecognitionEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SpellcheckEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SpellcheckEnabled_Explain
      VALUENAME "SpellcheckEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SpellcheckLanguage_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SpellcheckLanguage_Explain

      PART !!SpellcheckLanguage_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SpellcheckLanguage"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SpellcheckLanguageBlocklist_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!SpellcheckLanguageBlocklist_Explain

      PART !!SpellcheckLanguageBlocklist_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SpellcheckLanguageBlocklist"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!StricterMixedContentTreatmentEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V81_V84
      #endif
      EXPLAIN !!StricterMixedContentTreatmentEnabled_Explain
      VALUENAME "StricterMixedContentTreatmentEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SuppressUnsupportedOSWarning_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SuppressUnsupportedOSWarning_Explain
      VALUENAME "SuppressUnsupportedOSWarning"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SyncDisabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SyncDisabled_Explain
      VALUENAME "SyncDisabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SyncTypesListDisabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!SyncTypesListDisabled_Explain

      PART !!SyncTypesListDisabled_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\SyncTypesListDisabled"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!TLS13HardeningForLocalAnchorsEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V81_V85
      #endif
      EXPLAIN !!TLS13HardeningForLocalAnchorsEnabled_Explain
      VALUENAME "TLS13HardeningForLocalAnchorsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TLSCipherSuiteDenyList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V85
      #endif
      EXPLAIN !!TLSCipherSuiteDenyList_Explain

      PART !!TLSCipherSuiteDenyList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\TLSCipherSuiteDenyList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!TabFreezingEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V79_V86
      #endif
      EXPLAIN !!TabFreezingEnabled_Explain
      VALUENAME "TabFreezingEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TargetBlankImpliesNoOpener_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!TargetBlankImpliesNoOpener_Explain
      VALUENAME "TargetBlankImpliesNoOpener"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TaskManagerEndProcessEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!TaskManagerEndProcessEnabled_Explain
      VALUENAME "TaskManagerEndProcessEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TotalMemoryLimitMb_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!TotalMemoryLimitMb_Explain

      PART !!TotalMemoryLimitMb_Part  NUMERIC
        VALUENAME "TotalMemoryLimitMb"
        MIN 1024 MAX 2000000000
      END PART
    END POLICY

    POLICY !!TrackingPrevention_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!TrackingPrevention_Explain

      PART !!TrackingPrevention_Part  DROPDOWNLIST
        VALUENAME "TrackingPrevention"
        ITEMLIST
          NAME !!TrackingPrevention_TrackingPreventionOff_DropDown VALUE NUMERIC 0
          NAME !!TrackingPrevention_TrackingPreventionBasic_DropDown VALUE NUMERIC 1
          NAME !!TrackingPrevention_TrackingPreventionBalanced_DropDown VALUE NUMERIC 2
          NAME !!TrackingPrevention_TrackingPreventionStrict_DropDown VALUE NUMERIC 3
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!TranslateEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!TranslateEnabled_Explain
      VALUENAME "TranslateEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TravelAssistanceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!TravelAssistanceEnabled_Explain
      VALUENAME "TravelAssistanceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TripleDESEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!TripleDESEnabled_Explain
      VALUENAME "TripleDESEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!U2fSecurityKeyApiEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V98
      #endif
      EXPLAIN !!U2fSecurityKeyApiEnabled_Explain
      VALUENAME "U2fSecurityKeyApiEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!URLAllowlist_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!URLAllowlist_Explain

      PART !!URLAllowlist_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\URLAllowlist"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!URLBlocklist_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!URLBlocklist_Explain

      PART !!URLBlocklist_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\URLBlocklist"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!UserAgentClientHintsEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V86_V93
      #endif
      EXPLAIN !!UserAgentClientHintsEnabled_Explain
      VALUENAME "UserAgentClientHintsEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!UserAgentReduction_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!UserAgentReduction_Explain

      PART !!UserAgentReduction_Part  DROPDOWNLIST
        VALUENAME "UserAgentReduction"
        ITEMLIST
          NAME !!UserAgentReduction_Default_DropDown VALUE NUMERIC 0
          NAME !!UserAgentReduction_ForceDisabled_DropDown VALUE NUMERIC 1
          NAME !!UserAgentReduction_ForceEnabled_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!UserDataDir_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!UserDataDir_Explain

      PART !!UserDataDir_Part  EDITTEXT
        VALUENAME "UserDataDir"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!UserDataSnapshotRetentionLimit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V86
      #endif
      EXPLAIN !!UserDataSnapshotRetentionLimit_Explain

      PART !!UserDataSnapshotRetentionLimit_Part  NUMERIC
        VALUENAME "UserDataSnapshotRetentionLimit"
        MIN 0 MAX 5
      END PART
    END POLICY

    POLICY !!UserFeedbackAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!UserFeedbackAllowed_Explain
      VALUENAME "UserFeedbackAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!VerticalTabsAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!VerticalTabsAllowed_Explain
      VALUENAME "VerticalTabsAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!VideoCaptureAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!VideoCaptureAllowed_Explain
      VALUENAME "VideoCaptureAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!VideoCaptureAllowedUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!VideoCaptureAllowedUrls_Explain

      PART !!VideoCaptureAllowedUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\VideoCaptureAllowedUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!VisualSearchEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!VisualSearchEnabled_Explain
      VALUENAME "VisualSearchEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WPADQuickCheckEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!WPADQuickCheckEnabled_Explain
      VALUENAME "WPADQuickCheckEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebAppInstallForceList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!WebAppInstallForceList_Explain

      PART !!WebAppInstallForceList_Part  EDITTEXT
        VALUENAME "WebAppInstallForceList"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!WebCaptureEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!WebCaptureEnabled_Explain
      VALUENAME "WebCaptureEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebComponentsV0Enabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V80_V84
      #endif
      EXPLAIN !!WebComponentsV0Enabled_Explain
      VALUENAME "WebComponentsV0Enabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebDriverOverridesIncompatiblePolicies_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V77_V84
      #endif
      EXPLAIN !!WebDriverOverridesIncompatiblePolicies_Explain
      VALUENAME "WebDriverOverridesIncompatiblePolicies"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebRtcAllowLegacyTLSProtocols_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!WebRtcAllowLegacyTLSProtocols_Explain
      VALUENAME "WebRtcAllowLegacyTLSProtocols"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebRtcLocalIpsAllowedUrls_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!WebRtcLocalIpsAllowedUrls_Explain

      PART !!WebRtcLocalIpsAllowedUrls_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\WebRtcLocalIpsAllowedUrls"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!WebRtcLocalhostIpHandling_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!WebRtcLocalhostIpHandling_Explain

      PART !!WebRtcLocalhostIpHandling_Part  DROPDOWNLIST
        VALUENAME "WebRtcLocalhostIpHandling"
        ITEMLIST
          NAME !!WebRtcLocalhostIpHandling_AllowAllInterfaces_DropDown VALUE "default"
          NAME !!WebRtcLocalhostIpHandling_AllowPublicAndPrivateInterfaces_DropDown VALUE "default_public_and_private_interfaces"
          NAME !!WebRtcLocalhostIpHandling_AllowPublicInterfaceOnly_DropDown VALUE "default_public_interface_only"
          NAME !!WebRtcLocalhostIpHandling_DisableNonProxiedUdp_DropDown VALUE "disable_non_proxied_udp"
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!WebRtcRespectOsRoutingTableEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V94
      #endif
      EXPLAIN !!WebRtcRespectOsRoutingTableEnabled_Explain
      VALUENAME "WebRtcRespectOsRoutingTableEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebRtcUdpPortRange_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!WebRtcUdpPortRange_Explain

      PART !!WebRtcUdpPortRange_Part  EDITTEXT
        VALUENAME "WebRtcUdpPortRange"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!WebSQLInThirdPartyContextEnabled_Policy
      #if version >= 4
        SUPPORTED !!OBSOLETE_WIN7_V97_V100
      #endif
      EXPLAIN !!WebSQLInThirdPartyContextEnabled_Explain
      VALUENAME "WebSQLInThirdPartyContextEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebWidgetAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!WebWidgetAllowed_Explain
      VALUENAME "WebWidgetAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WebWidgetIsEnabledOnStartup_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!WebWidgetIsEnabledOnStartup_Explain
      VALUENAME "WebWidgetIsEnabledOnStartup"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WinHttpProxyResolverEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V84
      #endif
      EXPLAIN !!WinHttpProxyResolverEnabled_Explain
      VALUENAME "WinHttpProxyResolverEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!WindowOcclusionEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!WindowOcclusionEnabled_Explain
      VALUENAME "WindowOcclusionEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

  END CATEGORY

  CATEGORY !!microsoft_edge_recommended
    KEYNAME "Software\Policies\Microsoft\Edge\Recommended"

    CATEGORY !!HTTPAuthentication_Category
      POLICY !!WindowsHelloForHTTPAuthEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V90
        #endif
        EXPLAIN !!WindowsHelloForHTTPAuthEnabled_Explain
        VALUENAME "WindowsHelloForHTTPAuthEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Identity_Category
      POLICY !!SignInCtaOnNtpEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V99
        #endif
        EXPLAIN !!SignInCtaOnNtpEnabled_Explain
        VALUENAME "SignInCtaOnNtpEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!ContentSettings_Category
      POLICY !!RegisteredProtocolHandlers_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!RegisteredProtocolHandlers_Explain

        PART !!RegisteredProtocolHandlers_Part  EDITTEXT
          VALUENAME "RegisteredProtocolHandlers"
          MAXLEN 1000000
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!PasswordManager_Category
      POLICY !!PasswordManagerEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PasswordManagerEnabled_Explain
        VALUENAME "PasswordManagerEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PasswordRevealEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V87
        #endif
        EXPLAIN !!PasswordRevealEnabled_Explain
        VALUENAME "PasswordRevealEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PasswordMonitorAllowed_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!PasswordMonitorAllowed_Explain
        VALUENAME "PasswordMonitorAllowed"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Performance_Category
      POLICY !!StartupBoostEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!StartupBoostEnabled_Explain
        VALUENAME "StartupBoostEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!EfficiencyMode_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!EfficiencyMode_Explain

        PART !!EfficiencyMode_Part  DROPDOWNLIST
          VALUENAME "EfficiencyMode"
          ITEMLIST
            NAME !!EfficiencyMode_AlwaysActive_DropDown VALUE NUMERIC 0
            NAME !!EfficiencyMode_NeverActive_DropDown VALUE NUMERIC 1
            NAME !!EfficiencyMode_ActiveWhenUnplugged_DropDown VALUE NUMERIC 2
            NAME !!EfficiencyMode_ActiveWhenUnpluggedBatteryLow_DropDown VALUE NUMERIC 3
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!SleepingTabs_Category
      POLICY !!SleepingTabsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsEnabled_Explain
        VALUENAME "SleepingTabsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SleepingTabsTimeout_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsTimeout_Explain

        PART !!SleepingTabsTimeout_Part  DROPDOWNLIST
          VALUENAME "SleepingTabsTimeout"
          ITEMLIST
            NAME !!SleepingTabsTimeout_5Minutes_DropDown VALUE NUMERIC 300
            NAME !!SleepingTabsTimeout_15Minutes_DropDown VALUE NUMERIC 900
            NAME !!SleepingTabsTimeout_30Minutes_DropDown VALUE NUMERIC 1800
            NAME !!SleepingTabsTimeout_1Hour_DropDown VALUE NUMERIC 3600
            NAME !!SleepingTabsTimeout_2Hours_DropDown VALUE NUMERIC 7200
            NAME !!SleepingTabsTimeout_3Hours_DropDown VALUE NUMERIC 10800
            NAME !!SleepingTabsTimeout_6Hours_DropDown VALUE NUMERIC 21600
            NAME !!SleepingTabsTimeout_12Hours_DropDown VALUE NUMERIC 43200
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!SleepingTabsBlockedForUrls_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V88
        #endif
        EXPLAIN !!SleepingTabsBlockedForUrls_Explain

        PART !!SleepingTabsBlockedForUrls_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\Recommended\SleepingTabsBlockedForUrls"
          VALUEPREFIX ""
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!SmartScreen_Category
      POLICY !!SmartScreenEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!SmartScreenEnabled_Explain
        VALUENAME "SmartScreenEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewSmartScreenLibraryEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V95
        #endif
        EXPLAIN !!NewSmartScreenLibraryEnabled_Explain
        VALUENAME "NewSmartScreenLibraryEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenForTrustedDownloadsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V78
        #endif
        EXPLAIN !!SmartScreenForTrustedDownloadsEnabled_Explain
        VALUENAME "SmartScreenForTrustedDownloadsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenPuaEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V80
        #endif
        EXPLAIN !!SmartScreenPuaEnabled_Explain
        VALUENAME "SmartScreenPuaEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!SmartScreenDnsRequestsEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V97
        #endif
        EXPLAIN !!SmartScreenDnsRequestsEnabled_Explain
        VALUENAME "SmartScreenDnsRequestsEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!DefaultSearchProvider_Category
      POLICY !!DefaultSearchProviderEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderEnabled_Explain
        VALUENAME "DefaultSearchProviderEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!DefaultSearchProviderName_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderName_Explain

        PART !!DefaultSearchProviderName_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderName"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderKeyword_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderKeyword_Explain

        PART !!DefaultSearchProviderKeyword_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderKeyword"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderSearchURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderSearchURL_Explain

        PART !!DefaultSearchProviderSearchURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderSearchURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderSuggestURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderSuggestURL_Explain

        PART !!DefaultSearchProviderSuggestURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderSuggestURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderEncodings_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderEncodings_Explain

        PART !!DefaultSearchProviderEncodings_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\Recommended\DefaultSearchProviderEncodings"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderImageURL_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderImageURL_Explain

        PART !!DefaultSearchProviderImageURL_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderImageURL"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!DefaultSearchProviderImageURLPostParams_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!DefaultSearchProviderImageURLPostParams_Explain

        PART !!DefaultSearchProviderImageURLPostParams_Part  EDITTEXT
          VALUENAME "DefaultSearchProviderImageURLPostParams"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPageSearchBox_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!NewTabPageSearchBox_Explain

        PART !!NewTabPageSearchBox_Part  DROPDOWNLIST
          VALUENAME "NewTabPageSearchBox"
          ITEMLIST
            NAME !!NewTabPageSearchBox_bing_DropDown VALUE "bing"
            NAME !!NewTabPageSearchBox_redirect_DropDown VALUE "redirect"
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Startup_Category
      POLICY !!ShowHomeButton_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!ShowHomeButton_Explain
        VALUENAME "ShowHomeButton"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!HomepageLocation_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!HomepageLocation_Explain

        PART !!HomepageLocation_Part  EDITTEXT
          VALUENAME "HomepageLocation"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!HomepageIsNewTabPage_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!HomepageIsNewTabPage_Explain
        VALUENAME "HomepageIsNewTabPage"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!NewTabPageLocation_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!NewTabPageLocation_Explain

        PART !!NewTabPageLocation_Part  EDITTEXT
          VALUENAME "NewTabPageLocation"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPageSetFeedType_Policy
        #if version >= 4
          SUPPORTED !!OBSOLETE_WIN7_V79_V92
        #endif
        EXPLAIN !!NewTabPageSetFeedType_Explain

        PART !!NewTabPageSetFeedType_Part  DROPDOWNLIST
          VALUENAME "NewTabPageSetFeedType"
          ITEMLIST
            NAME !!NewTabPageSetFeedType_News_DropDown VALUE NUMERIC 0
            NAME !!NewTabPageSetFeedType_Office_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!RestoreOnStartup_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!RestoreOnStartup_Explain

        PART !!RestoreOnStartup_Part  DROPDOWNLIST
          VALUENAME "RestoreOnStartup"
          ITEMLIST
            NAME !!RestoreOnStartup_RestoreOnStartupIsNewTabPage_DropDown VALUE NUMERIC 5
            NAME !!RestoreOnStartup_RestoreOnStartupIsLastSession_DropDown VALUE NUMERIC 1
            NAME !!RestoreOnStartup_RestoreOnStartupIsURLs_DropDown VALUE NUMERIC 4
          END ITEMLIST
        END PART
      END POLICY

      POLICY !!RestoreOnStartupURLs_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!RestoreOnStartupURLs_Explain

        PART !!RestoreOnStartupURLs_Part  LISTBOX
          KEYNAME "Software\Policies\Microsoft\Edge\Recommended\RestoreOnStartupURLs"
          VALUEPREFIX ""
        END PART
      END POLICY

      POLICY !!NewTabPageManagedQuickLinks_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V79
        #endif
        EXPLAIN !!NewTabPageManagedQuickLinks_Explain

        PART !!NewTabPageManagedQuickLinks_Part  EDITTEXT
          VALUENAME "NewTabPageManagedQuickLinks"
          MAXLEN 1000000
        END PART
      END POLICY

      POLICY !!NewTabPagePrerenderEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V85
        #endif
        EXPLAIN !!NewTabPagePrerenderEnabled_Explain
        VALUENAME "NewTabPagePrerenderEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!TyposquattingChecker_Category
      POLICY !!TyposquattingCheckerEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V96
        #endif
        EXPLAIN !!TyposquattingCheckerEnabled_Explain
        VALUENAME "TyposquattingCheckerEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    CATEGORY !!Printing_Category
      POLICY !!PrintHeaderFooter_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PrintHeaderFooter_Explain
        VALUENAME "PrintHeaderFooter"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrintPreviewUseSystemDefaultPrinter_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V77
        #endif
        EXPLAIN !!PrintPreviewUseSystemDefaultPrinter_Explain
        VALUENAME "PrintPreviewUseSystemDefaultPrinter"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

      POLICY !!PrintingWebpageLayout_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V93
        #endif
        EXPLAIN !!PrintingWebpageLayout_Explain

        PART !!PrintingWebpageLayout_Part  DROPDOWNLIST
          VALUENAME "PrintingWebpageLayout"
          ITEMLIST
            NAME !!PrintingWebpageLayout_portrait_DropDown VALUE NUMERIC 0
            NAME !!PrintingWebpageLayout_landscape_DropDown VALUE NUMERIC 1
          END ITEMLIST
        END PART
      END POLICY

    END CATEGORY

    CATEGORY !!Extensions_Category
      POLICY !!ControlDefaultStateOfAllowExtensionFromOtherStoresSettingEnabled_Policy
        #if version >= 4
          SUPPORTED !!SUPPORTED_WIN7_V101
        #endif
        EXPLAIN !!ControlDefaultStateOfAllowExtensionFromOtherStoresSettingEnabled_Explain
        VALUENAME "ControlDefaultStateOfAllowExtensionFromOtherStoresSettingEnabled"
        VALUEON NUMERIC 1
        VALUEOFF NUMERIC 0
      END POLICY

    END CATEGORY

    POLICY !!AADWebSiteSSOUsingThisProfileEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!AADWebSiteSSOUsingThisProfileEnabled_Explain
      VALUENAME "AADWebSiteSSOUsingThisProfileEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AlternateErrorPagesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V80
      #endif
      EXPLAIN !!AlternateErrorPagesEnabled_Explain
      VALUENAME "AlternateErrorPagesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ApplicationLocaleValue_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ApplicationLocaleValue_Explain

      PART !!ApplicationLocaleValue_Part  EDITTEXT
        VALUENAME "ApplicationLocaleValue"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!AutofillAddressEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AutofillAddressEnabled_Explain
      VALUENAME "AutofillAddressEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutofillCreditCardEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!AutofillCreditCardEnabled_Explain
      VALUENAME "AutofillCreditCardEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!AutomaticHttpsDefault_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!AutomaticHttpsDefault_Explain

      PART !!AutomaticHttpsDefault_Part  DROPDOWNLIST
        VALUENAME "AutomaticHttpsDefault"
        ITEMLIST
          NAME !!AutomaticHttpsDefault_DisableAutomaticHttps_DropDown VALUE NUMERIC 0
          NAME !!AutomaticHttpsDefault_UpgradeCapableDomains_DropDown VALUE NUMERIC 1
          NAME !!AutomaticHttpsDefault_AlwaysUpgrade_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!BackgroundModeEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BackgroundModeEnabled_Explain
      VALUENAME "BackgroundModeEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!BlockThirdPartyCookies_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!BlockThirdPartyCookies_Explain
      VALUENAME "BlockThirdPartyCookies"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!FavoritesBarEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!FavoritesBarEnabled_Explain
      VALUENAME "FavoritesBarEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ClearBrowsingDataOnExit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!ClearBrowsingDataOnExit_Explain
      VALUENAME "ClearBrowsingDataOnExit"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ClearCachedImagesAndFilesOnExit_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!ClearCachedImagesAndFilesOnExit_Explain
      VALUENAME "ClearCachedImagesAndFilesOnExit"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!DownloadDirectory_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DownloadDirectory_Explain

      PART !!DownloadDirectory_Part  EDITTEXT
        VALUENAME "DownloadDirectory"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!DownloadRestrictions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!DownloadRestrictions_Explain

      PART !!DownloadRestrictions_Part  DROPDOWNLIST
        VALUENAME "DownloadRestrictions"
        ITEMLIST
          NAME !!DownloadRestrictions_DefaultDownloadSecurity_DropDown VALUE NUMERIC 0
          NAME !!DownloadRestrictions_BlockDangerousDownloads_DropDown VALUE NUMERIC 1
          NAME !!DownloadRestrictions_BlockPotentiallyDangerousDownloads_DropDown VALUE NUMERIC 2
          NAME !!DownloadRestrictions_BlockAllDownloads_DropDown VALUE NUMERIC 3
          NAME !!DownloadRestrictions_BlockMaliciousDownloads_DropDown VALUE NUMERIC 4
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!EdgeAssetDeliveryServiceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!EdgeAssetDeliveryServiceEnabled_Explain
      VALUENAME "EdgeAssetDeliveryServiceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeDiscoverEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V97
      #endif
      EXPLAIN !!EdgeDiscoverEnabled_Explain
      VALUENAME "EdgeDiscoverEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!EdgeShoppingAssistantEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!EdgeShoppingAssistantEnabled_Explain
      VALUENAME "EdgeShoppingAssistantEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!HubsSidebarEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V99
      #endif
      EXPLAIN !!HubsSidebarEnabled_Explain
      VALUENAME "HubsSidebarEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportAutofillFormData_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportAutofillFormData_Explain
      VALUENAME "ImportAutofillFormData"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportFavorites_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportFavorites_Explain
      VALUENAME "ImportFavorites"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportBrowserSettings_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V78
      #endif
      EXPLAIN !!ImportBrowserSettings_Explain
      VALUENAME "ImportBrowserSettings"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportCookies_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportCookies_Explain
      VALUENAME "ImportCookies"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportExtensions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportExtensions_Explain
      VALUENAME "ImportExtensions"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportHistory_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportHistory_Explain
      VALUENAME "ImportHistory"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportOpenTabs_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V79
      #endif
      EXPLAIN !!ImportOpenTabs_Explain
      VALUENAME "ImportOpenTabs"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportPaymentInfo_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportPaymentInfo_Explain
      VALUENAME "ImportPaymentInfo"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportSavedPasswords_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportSavedPasswords_Explain
      VALUENAME "ImportSavedPasswords"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportSearchEngine_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ImportSearchEngine_Explain
      VALUENAME "ImportSearchEngine"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportShortcuts_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V81
      #endif
      EXPLAIN !!ImportShortcuts_Explain
      VALUENAME "ImportShortcuts"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ImportStartupPageSettings_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V91
      #endif
      EXPLAIN !!ImportStartupPageSettings_Explain
      VALUENAME "ImportStartupPageSettings"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerIntegrationReloadInIEModeAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V92
      #endif
      EXPLAIN !!InternetExplorerIntegrationReloadInIEModeAllowed_Explain
      VALUENAME "InternetExplorerIntegrationReloadInIEModeAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!InternetExplorerModeToolbarButtonEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V96
      #endif
      EXPLAIN !!InternetExplorerModeToolbarButtonEnabled_Explain
      VALUENAME "InternetExplorerModeToolbarButtonEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!LocalBrowserDataShareEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!LocalBrowserDataShareEnabled_Explain
      VALUENAME "LocalBrowserDataShareEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!LocalProvidersEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V83
      #endif
      EXPLAIN !!LocalProvidersEnabled_Explain
      VALUENAME "LocalProvidersEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!MSAWebSiteSSOUsingThisProfileAllowed_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!MSAWebSiteSSOUsingThisProfileAllowed_Explain
      VALUENAME "MSAWebSiteSSOUsingThisProfileAllowed"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ManagedSearchEngines_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ManagedSearchEngines_Explain

      PART !!ManagedSearchEngines_Part  EDITTEXT
        VALUENAME "ManagedSearchEngines"
        MAXLEN 1000000
      END PART
    END POLICY

    POLICY !!NetworkPredictionOptions_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!NetworkPredictionOptions_Explain

      PART !!NetworkPredictionOptions_Part  DROPDOWNLIST
        VALUENAME "NetworkPredictionOptions"
        ITEMLIST
          NAME !!NetworkPredictionOptions_NetworkPredictionAlways_DropDown VALUE NUMERIC 0
          NAME !!NetworkPredictionOptions_NetworkPredictionWifiOnly_DropDown VALUE NUMERIC 1
          NAME !!NetworkPredictionOptions_NetworkPredictionNever_DropDown VALUE NUMERIC 2
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!RedirectSitesFromInternetExplorerRedirectMode_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V87
      #endif
      EXPLAIN !!RedirectSitesFromInternetExplorerRedirectMode_Explain

      PART !!RedirectSitesFromInternetExplorerRedirectMode_Part  DROPDOWNLIST
        VALUENAME "RedirectSitesFromInternetExplorerRedirectMode"
        ITEMLIST
          NAME !!RedirectSitesFromInternetExplorerRedirectMode_Disable_DropDown VALUE NUMERIC 0
          NAME !!RedirectSitesFromInternetExplorerRedirectMode_Sitelist_DropDown VALUE NUMERIC 1
        END ITEMLIST
      END PART
    END POLICY

    POLICY !!ResolveNavigationErrorsUseWebService_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!ResolveNavigationErrorsUseWebService_Explain
      VALUENAME "ResolveNavigationErrorsUseWebService"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SearchSuggestEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SearchSuggestEnabled_Explain
      VALUENAME "SearchSuggestEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!ShowMicrosoftRewards_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V88
      #endif
      EXPLAIN !!ShowMicrosoftRewards_Explain
      VALUENAME "ShowMicrosoftRewards"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SiteSafetyServicesEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V101
      #endif
      EXPLAIN !!SiteSafetyServicesEnabled_Explain
      VALUENAME "SiteSafetyServicesEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!SmartActionsBlockList_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V89
      #endif
      EXPLAIN !!SmartActionsBlockList_Explain

      PART !!SmartActionsBlockList_Part  LISTBOX
        KEYNAME "Software\Policies\Microsoft\Edge\Recommended\SmartActionsBlockList"
        VALUEPREFIX ""
      END PART
    END POLICY

    POLICY !!SyncDisabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!SyncDisabled_Explain
      VALUENAME "SyncDisabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TranslateEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V77
      #endif
      EXPLAIN !!TranslateEnabled_Explain
      VALUENAME "TranslateEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!TravelAssistanceEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V93
      #endif
      EXPLAIN !!TravelAssistanceEnabled_Explain
      VALUENAME "TravelAssistanceEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

    POLICY !!VisualSearchEnabled_Policy
      #if version >= 4
        SUPPORTED !!SUPPORTED_WIN7_V95
      #endif
      EXPLAIN !!VisualSearchEnabled_Explain
      VALUENAME "VisualSearchEnabled"
      VALUEON NUMERIC 1
      VALUEOFF NUMERIC 0
    END POLICY

  END CATEGORY


[Strings]
microsoft_edge="Microsoft Edge"
microsoft_edge_recommended="Microsoft Edge - Standardinnstillinger (kan overstyres av brukere)"
Other_Category="Annet"
PromptOnMultipleMatchingCertificates_Policy="Prompt the user to select a certificate when multiple certificates match"
PromptOnMultipleMatchingCertificates_Explain="This policy controls whether the user is prompted to select a client certificate when more than one certificate matches 'AutoSelectCertificateForUrls' (Automatisk valg av klientsertifikater for disse nettstedene).\nIf this policy is set to True, the user is prompted to select a client certificate whenever the auto-selection policy matches multiple certificates.\nIf this policy is set to False or not set, the user may only be prompted when no certificate matches the auto-selection.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#promptonmultiplematchingcertificates"
ApplicationGuard_Category="Application Guard settings"
ApplicationGuardContainerProxy_Policy="Application Guard Container Proxy"
ApplicationGuardContainerProxy_Explain="Configures the proxy settings for Microsoft Edge Application Guard.\nIf you enable this policy, Microsoft Edge Application Guard ignores other sources of proxy configurations.\n\nIf you don't configure this policy, Microsoft Edge Application Guard uses the proxy configuration of the host.\n\nThis policy does not affect the proxy configuration of Microsoft Edge outside of Application Guard (on the host).\n\nThe ProxyMode field lets you specify the proxy server used by Microsoft Edge Application Guard.\n\nThe ProxyPacUrl field is a URL to a proxy .pac file.\n\nThe ProxyServer field is a URL for the proxy server.\n\nIf you choose the 'direct' value as 'ProxyMode', all other fields are ignored.\n\nIf you choose the 'auto_detect' value as 'ProxyMode', all other fields are ignored.\n\nIf you choose the 'fixed_servers' value as 'ProxyMode', the 'ProxyServer' field is used.\n\nIf you choose the 'pac_script' value as 'ProxyMode', the 'ProxyPacUrl' field is used.\n\nFor more information about identifying Application Guard traffic via dual proxy, visit https://go.microsoft.com/fwlink/?linkid=2134653.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#applicationguardcontainerproxy"
ApplicationGuardContainerProxy_Part="Application Guard Container Proxy"
ApplicationGuardFavoritesSyncEnabled_Policy="Application Guard Favorites Sync Enabled"
ApplicationGuardFavoritesSyncEnabled_Explain="This policy allows Microsoft Edge computers/devices that have application guard enabled to sync favorites from the host to the container so the favorites match.\n\nIf 'ManagedFavorites' (Configure favorites) are configured, those favorites will also be synced to the container.\n\nIf you enable this policy, editing favorites in the container is disabled. So, the add favorites and add favorites folder buttons will be blurred out in the UI of the container browser.\n\nIf you disable or don't configure this policy, favorites on the host will not be shared to the container.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#applicationguardfavoritessyncenabled"
ApplicationGuardPassiveModeEnabled_Policy="Ignore Application Guard site list configuration and browse Edge normally"
ApplicationGuardPassiveModeEnabled_Explain="Set whether Edge should ignore the Application Guard site list configuration for trusted and untrusted sites.\n\nIf you enable this policy, all navigations from Edge, including navigations to untrusted sites, will be accessed normally within Edge without redirecting to the Application Guard container. Note: this policy ONLY impacts Edge, so navigations from other browsers might get redirected to the Application Guard Container if you have the corresponding extensions enabled.\n\nIf you disable or don't configure this policy, Edge does not ignore the Application Guard site list. If users try to navigate to an untrusted site in the host, the site will open in the container.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#applicationguardpassivemodeenabled"
ApplicationGuardTrafficIdentificationEnabled_Policy="Application Guard Traffic Identification"
ApplicationGuardTrafficIdentificationEnabled_Explain="If you enable or don't configure this policy, Application Guard will add an extra HTTP header (X-MS-ApplicationGuard-Initiated) to all outbound HTTP requests made from the Application Guard container.\n\nIf you disable this policy, the extra header is not added to the traffic.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#applicationguardtrafficidentificationenabled"
ApplicationGuardUploadBlockingEnabled_Policy="Prevents files from being uploaded while in Application Guard"
ApplicationGuardUploadBlockingEnabled_Explain="Sets whether files can be uploaded while in Application Guard.\n\nIf you enable this policy, users will not be able to upload files in Application Guard.\n\nIf you disable or don't configure this policy, users will be able to upload files while in Application Guard.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#applicationguarduploadblockingenabled"
GoogleCast_Category="Cast"
EnableMediaRouter_Policy="Enable Google Cast"
EnableMediaRouter_Explain="Enable this policy to enable Google Cast. Users will be able to launch it from the app menu, page context menus, media controls on Cast-enabled websites, and (if shown) the Cast toolbar icon.\n\nDisable this policy to disable Google Cast.\n\nBy default, Google Cast is enabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enablemediarouter"
ShowCastIconInToolbar_Policy="Show the cast icon in the toolbar"
ShowCastIconInToolbar_Explain="Set this policy to true to show the Cast toolbar icon on the toolbar or the overflow menu. Users won't be able to remove it.\n\nIf you don't configure this policy or if you disable it, users can pin or remove the icon by using its contextual menu.\n\nIf you've also set the 'EnableMediaRouter' (Enable Google Cast) policy to false, then this policy is ignored, and the toolbar icon isn't shown.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#showcasticonintoolbar"
Experimentation_Category="Experimentation"
FeatureFlagOverridesControl_Policy="Configure users ability to override feature flags"
FeatureFlagOverridesControl_Explain="Configures users ability to override state of feature flags.\nIf you set this policy to 'CommandLineOverridesEnabled', users can override state of feature flags using command line arguments but not edge://flags page.\n\nIf you set this policy to 'OverridesEnabled', users can override state of feature flags using command line arguments or edge://flags page.\n\nIf you set this policy to 'OverridesDisabled', users can't override state of feature flags using command line arguments or edge://flags page.\n\nIf you don't configure this policy, the behavior is the same as the 'OverridesEnabled'.\n\nPolicy options mapping:\n\n* CommandLineOverridesEnabled (2) = Allow users to override feature flags using command line arguments only\n\n* OverridesEnabled (1) = Allow users to override feature flags\n\n* OverridesDisabled (0) = Prevent users from overriding feature flags\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#featureflagoverridescontrol"
FeatureFlagOverridesControl_Part="Configure users ability to override feature flags"
FeatureFlagOverridesControl_CommandLineOverridesEnabled_DropDown="Allow users to override feature flags using command line arguments only"
FeatureFlagOverridesControl_OverridesEnabled_DropDown="Allow users to override feature flags"
FeatureFlagOverridesControl_OverridesDisabled_DropDown="Prevent users from overriding feature flags"
HTTPAuthentication_Category="HTTP-autentisering"
AuthSchemes_Policy="Støttede autentiseringssystemer"
AuthSchemes_Explain="Specifies which HTTP authentication schemes are supported.\n\nYou can configure the policy by using these values: 'basic', 'digest', 'ntlm', and 'negotiate'. Separate multiple values with commas.\n\nIf you don't configure this policy, all four schemes are used.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#authschemes"
AuthSchemes_Part="Støttede autentiseringssystemer"
DisableAuthNegotiateCnameLookup_Policy="Deaktiver CNAME-oppslag under forhandling om Kerberos-godkjenning"
DisableAuthNegotiateCnameLookup_Explain="Determines whether the generated Kerberos SPN is based on the canonical DNS name (CNAME) or on the original name entered.\n\nIf you enable this policy, CNAME lookup is skipped and the server name (as entered) is used.\n\nIf you disable this policy or don't configure it, the canonical name of the server is used.  This is determined through CNAME lookup.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#disableauthnegotiatecnamelookup"
EnableAuthNegotiatePort_Policy="Inkluder ikke-standardisert port i SPN for Kerberos"
EnableAuthNegotiatePort_Explain="Specifies whether the generated Kerberos SPN should include a non-standard port.\n\nIf you enable this policy, and a user includes a non-standard port (a port other than 80 or 443) in a URL, that port is included in the generated Kerberos SPN.\n\nIf you don't configure or disable this policy, the generated Kerberos SPN won't include a port in any case.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enableauthnegotiateport"
BasicAuthOverHttpEnabled_Policy="Allow Basic authentication for HTTP"
BasicAuthOverHttpEnabled_Explain="If you enable this policy or leave it unset, Basic authentication challenges received over non-secure HTTP will be allowed.\n\nIf you disable this policy,  non-secure HTTP requests from the Basic authentication scheme are blocked, and only secure HTTPS is allowed.\n\nThis policy setting is ignored (and Basic is always forbidden) if the 'AuthSchemes' (Støttede autentiseringssystemer) policy is set and does not include Basic.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#basicauthoverhttpenabled"
AuthServerAllowlist_Policy="Configure list of allowed authentication servers"
AuthServerAllowlist_Explain="Specifies which servers to enable for integrated authentication. Integrated authentication is only enabled when Microsoft Edge receives an authentication challenge from a proxy or from a server in this list.\n\nSeparate multiple server names with commas. Wildcards (*) are allowed.\n\nIf you don't configure this policy, Microsoft Edge tries to detect if a server is on the intranet - only then will it respond to IWA requests. If the server is on the internet, IWA requests from it are ignored by Microsoft Edge.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#authserverallowlist"
AuthServerAllowlist_Part="Configure list of allowed authentication servers"
AuthNegotiateDelegateAllowlist_Policy="Specifies a list of servers that Microsoft Edge can delegate user credentials to"
AuthNegotiateDelegateAllowlist_Explain="Configure the list of servers that Microsoft Edge can delegate to.\n\nSeparate multiple server names with commas. Wildcards (*) are allowed.\n\nIf you don't configure this policy Microsoft Edge won't delegate user credentials even if a server is detected as Intranet.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#authnegotiatedelegateallowlist"
AuthNegotiateDelegateAllowlist_Part="Specifies a list of servers that Microsoft Edge can delegate user credentials to"
AllowCrossOriginAuthPrompt_Policy="Allow cross-origin HTTP Authentication prompts"
AllowCrossOriginAuthPrompt_Explain="Controls whether third-party images on a page can show an authentication prompt.\n\nTypically, this is disabled as a phishing defense. If you don't configure this policy, it's disabled and third-party images can't show an authentication prompt.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#allowcrossoriginauthprompt"
WindowsHelloForHTTPAuthEnabled_Policy="Windows Hello For HTTP Auth Enabled"
WindowsHelloForHTTPAuthEnabled_Explain="Indicates if Windows Credential UI should be used to respond to NTLM and Negotiate authentication challenges.\n\nIf you disable this policy, a basic username and password prompt will be used to respond to NTLM and Negotiate challenges. If you enable or don't configure this policy, Windows Credential UI will be used.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#windowshelloforhttpauthenabled"
Identity_Category="Identity and sign-in"
ImplicitSignInEnabled_Policy="Enable implicit sign-in"
ImplicitSignInEnabled_Explain="Configure this policy to allow/disallow implicit sign-in.\n\nIf you have configured the 'BrowserSignin' (Browser sign-in settings) policy to 'Disable browser sign-in', this policy will not take any effect.\n\nIf you enable or don't configure this setting, implicit sign-in will be enabled, Edge will attempt to sign the user into their profile based on what and how they sign in to their OS.\n\nIf you disable this setting, implicit sign-in will be disabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#implicitsigninenabled"
OneAuthAuthenticationEnforced_Policy="OneAuth Authentication Flow Enforced for signin"
OneAuthAuthenticationEnforced_Explain="This policy allows users to decide whether to use the OneAuth library for sign-in and token fetch in Microsoft Edge on Windows 10 RS3 and above.\n\nIf you disable or don't configure this policy, signin process will use Windows Account Manager. Microsoft Edge would be able to use accounts you logged in to Windows, Microsoft Office, or other Microsoft applications for login, without the needing of password. Or you can provide valid account and password to sign in, which will be stored in Windows Account Manager for future usage. You will be able to investigate all accounts stored in Windows Account Manager through Windows Settings -> Accounts -> Email and accounts page.\n\nIf you enable this policy, OneAuth authentication flow will be used for account signin. The OneAuth authentication flow has fewer dependencies and can work without Windows shell. The account you use would not be stored in the Email and accounts page.\n\nThis policy will only take effect on Windows 10 RS3 and above. On Windows 10 below RS3, OneAuth is used for authentication in Microsoft Edge by default.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#oneauthauthenticationenforced"
OnlyOnPremisesImplicitSigninEnabled_Policy="Only on-premises account enabled for implicit sign-in"
OnlyOnPremisesImplicitSigninEnabled_Explain="Configure this policy to decide whether only on-premises accounts are enabled for implicit sign-in.\n\nIf you enable this policy, only on-premises accounts will be enabled for implicit sign-in. Microsoft Edge won't attempt to implicitly sign in to MSA or AAD accounts. Upgrade from on-premises accounts to AAD accounts will be stopped as well.\n\nIf you disable or don't configure this policy, all accounts will be enabled for implicit sign-in.\n\nThis policy will only take effect when policy 'ConfigureOnPremisesAccountAutoSignIn' (Configure automatic sign in with an Active Directory domain account when there is no Azure AD domain account) is enabled and set to 'SignInAndMakeDomainAccountNonRemovable'.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#onlyonpremisesimplicitsigninenabled"
EdgeDefaultProfileEnabled_Policy="Default Profile Setting Enabled"
EdgeDefaultProfileEnabled_Explain="Configuring this policy will let you set a default profile in Microsoft Edge to be used when opening the browser rather than the last profile used. This policy won't affect when "--profile-directory" parameter has been specified. Set the value to "Default" to refer to the default profile. The value is case sensitive.\nThe value of the policy is the name of the profile (case sensitive) and can be configured with string that is the name of a specific profile.\nThe value "Edge Kids Mode" and "Guest Profile" are considered not useful values because they not supposed to be a default profile.\nThis policy won't impact the following scenarios:\n  1) Settings specified in "Profile preferences for sites" in "Profile preferences"\n  2) Links opening from Outlook and Teams.\n\nThe following statements are under the condition of not specify the "--profile-directory" and configured value is not "Edge Kids Mode" or "Guest Profile":\nIf you enable this policy and configure it with a specific profile name and the specified profile can be found, Microsoft Edge will use the specified profile when launching and the setting of "Default profile for external link" is changed to the specified profile name and greyed out.\nIf you enable this policy and configure it with a specific profile name but it can't be found, the policy will behave like it's never been set before.\nIf you enable this policy, but don't configure or disable it, the policy will behave like it's never been set before.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#edgedefaultprofileenabled"
EdgeDefaultProfileEnabled_Part="Default Profile Setting Enabled"
WAMAuthBelowWin10RS3Enabled_Policy="WAM for authentication below Windows 10 RS3 enabled"
WAMAuthBelowWin10RS3Enabled_Explain="Configure this policy to decide whether WAM is used for authentication in Microsoft Edge on Windows 10 RS1 and RS2.\n\nIf you enable this setting, WAM will be used in the authentication flow on Windows 10 RS1 and RS2.\n\nIf you disable or don't configure this setting, OneAuth libraries will be used instead of WAM on Windows 10 RS1 and RS2.\n\nNote that if this policy is enabled, then previous sign-in sessions (which used OneAuth by default) cannot be used. Please sign out of those profiles.\n\nThis policy will only take effect on Windows 10 RS1 and RS2. On Windows 10 RS3 and above, WAM is used for authentication in Microsoft Edge by default.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#wamauthbelowwin10rs3enabled"
SignInCtaOnNtpEnabled_Policy="Enable sign in click to action dialog"
SignInCtaOnNtpEnabled_Explain="Configure this policy to show sign in click to action dialog on New tab page.\n\nIf you enable or don't configure this policy, sign in click to action dialog is shown on New tab page.\n\nIf you disable this policy, sign in click to action dialog isn't shown on the New tab page.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#signinctaonntpenabled"
NativeMessaging_Category="Innebygde meldinger"
NativeMessagingBlocklist_Policy="Configure native messaging block list"
NativeMessagingBlocklist_Explain="Setting this policy specifies which native messaging hosts shouldn't be loaded. A deny list value of * means all native messaging hosts are denied unless they're explicitly allowed.\n\nIf you leave this policy unset , Microsoft Edge loads all installed native messaging hosts.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#nativemessagingblocklist"
NativeMessagingBlocklist_Part="Navnene på de forbudte innebygde meldingsvertene (eller * for alle)"
NativeMessagingAllowlist_Policy="Control which native messaging hosts users can use"
NativeMessagingAllowlist_Explain="Setting the policy specifies which native messaging hosts aren't subject to the deny list. A deny list value of * means all native messaging hosts are denied unless they're explicitly allowed.\n\nAll native messaging hosts are allowed by default. However, if a native messaging host is denied by policy, the admin can use the allow list to change that policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#nativemessagingallowlist"
NativeMessagingAllowlist_Part="Names of the native messaging hosts to exempt from the block list"
NativeMessagingUserLevelHosts_Policy="Allow user-level native messaging hosts (installed without admin permissions)"
NativeMessagingUserLevelHosts_Explain="If you set this policy to Enabled or leave it unset, Microsoft Edge can use native messaging hosts installed at the user level.\n\nIf you set this policy to Disabled, Microsoft Edge can only use these hosts if they're installed at the system level.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#nativemessaginguserlevelhosts"
ContentSettings_Category="Innholdsinnstillinger"
DefaultCookiesSetting_Policy="Configure cookies"
DefaultCookiesSetting_Explain="Control whether websites can create cookies on the user's device. This policy is all or nothing - you can let all websites create cookies, or no websites create cookies. You can't use this policy to enable cookies from specific websites.\n\nSet the policy to 'SessionOnly' to clear cookies when the session closes.\n\nIf you don't configure this policy, the default 'AllowCookies' is used, and users can change this setting in Microsoft Edge Settings. (If you don't want users to be able to change this setting, set the policy.)\n\nPolicy options mapping:\n\n* AllowCookies (1) = Let all sites create cookies\n\n* BlockCookies (2) = Don't let any site create cookies\n\n* SessionOnly (4) = Keep cookies for the duration of the session, except ones listed in 'SaveCookiesOnExit' (Save cookies when Microsoft Edge closes)\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultcookiessetting"
DefaultCookiesSetting_Part="Configure cookies"
DefaultCookiesSetting_AllowCookies_DropDown="Let all sites create cookies"
DefaultCookiesSetting_BlockCookies_DropDown="Don't let any site create cookies"
DefaultCookiesSetting_SessionOnly_DropDown="Keep cookies for the duration of the session, except ones listed in "SaveCookiesOnExit""
DefaultFileSystemReadGuardSetting_Policy="Control use of the File System API for reading"
DefaultFileSystemReadGuardSetting_Explain="If you set this policy to 3, websites can ask for read access to the host operating system's filesystem using the File System API. If you set this policy to 2, access is denied.\n\nIf you don't set this policy, websites can ask for access. Users can change this setting.\n\nPolicy options mapping:\n\n* BlockFileSystemRead (2) = Don't allow any site to request read access to files and directories via the File System API\n\n* AskFileSystemRead (3) = Allow sites to ask the user to grant read access to files and directories via the File System API\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultfilesystemreadguardsetting"
DefaultFileSystemReadGuardSetting_Part="Control use of the File System API for reading"
DefaultFileSystemReadGuardSetting_BlockFileSystemRead_DropDown="Don't allow any site to request read access to files and directories via the File System API"
DefaultFileSystemReadGuardSetting_AskFileSystemRead_DropDown="Allow sites to ask the user to grant read access to files and directories via the File System API"
DefaultFileSystemWriteGuardSetting_Policy="Control use of the File System API for writing"
DefaultFileSystemWriteGuardSetting_Explain="If you set this policy to 3, websites can ask for write access to the host operating system's filesystem using the File System API. If you set this policy to 2, access is denied.\n\nIf you don't set this policy, websites can ask for access. Users can change this setting.\n\nPolicy options mapping:\n\n* BlockFileSystemWrite (2) = Don't allow any site to request write access to files and directories\n\n* AskFileSystemWrite (3) = Allow sites to ask the user to grant write access to files and directories\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultfilesystemwriteguardsetting"
DefaultFileSystemWriteGuardSetting_Part="Control use of the File System API for writing"
DefaultFileSystemWriteGuardSetting_BlockFileSystemWrite_DropDown="Don't allow any site to request write access to files and directories"
DefaultFileSystemWriteGuardSetting_AskFileSystemWrite_DropDown="Allow sites to ask the user to grant write access to files and directories"
DefaultImagesSetting_Policy="Standardinnstilling for bilder"
DefaultImagesSetting_Explain="Set whether websites can display images. You can allow images on all sites ('AllowImages') or block them on all sites ('BlockImages').\n\nIf you don't configure this policy, images are allowed by default, and the user can change this setting.\n\nPolicy options mapping:\n\n* AllowImages (1) = La alle nettsteder vise alle bilder\n\n* BlockImages (2) = Don't allow any site to show images\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultimagessetting"
DefaultImagesSetting_Part="Standardinnstilling for bilder"
DefaultImagesSetting_AllowImages_DropDown="La alle nettsteder vise alle bilder"
DefaultImagesSetting_BlockImages_DropDown="Don't allow any site to show images"
DefaultInsecureContentSetting_Policy="Control use of insecure content exceptions"
DefaultInsecureContentSetting_Explain="Allows you to set whether users can add exceptions to allow mixed content for specific sites.\n\nThis policy can be overridden for specific URL patterns using the 'InsecureContentAllowedForUrls' (Allow insecure content on specified sites) and 'InsecureContentBlockedForUrls' (Block insecure content on specified sites) policies.\n\nIf this policy isn't set, users will be allowed to add exceptions to allow blockable mixed content and disable autoupgrades for optionally blockable mixed content.\n\nPolicy options mapping:\n\n* BlockInsecureContent (2) = Do not allow any site to load mixed content\n\n* AllowExceptionsInsecureContent (3) = Allow users to add exceptions to allow mixed content\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultinsecurecontentsetting"
DefaultInsecureContentSetting_Part="Control use of insecure content exceptions"
DefaultInsecureContentSetting_BlockInsecureContent_DropDown="Do not allow any site to load mixed content"
DefaultInsecureContentSetting_AllowExceptionsInsecureContent_DropDown="Allow users to add exceptions to allow mixed content"
DefaultJavaScriptSetting_Policy="Standard JavaScript-innstilling"
DefaultJavaScriptSetting_Explain="Set whether websites can run JavaScript. You can allow it for all sites ('AllowJavaScript') or block it for all sites ('BlockJavaScript').\n\nIf you don't configure this policy, all sites can run JavaScript by default, and the user can change this setting.\n\nPolicy options mapping:\n\n* AllowJavaScript (1) = Tillat alle nettsteder å kjøre JavaScript\n\n* BlockJavaScript (2) = Don't allow any site to run JavaScript\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultjavascriptsetting"
DefaultJavaScriptSetting_Part="Standard JavaScript-innstilling"
DefaultJavaScriptSetting_AllowJavaScript_DropDown="Tillat alle nettsteder å kjøre JavaScript"
DefaultJavaScriptSetting_BlockJavaScript_DropDown="Don't allow any site to run JavaScript"
DefaultJavaScriptJitSetting_Policy="Control use of JavaScript JIT"
DefaultJavaScriptJitSetting_Explain="Allows you to set whether Microsoft Edge will run the v8 JavaScript engine with JIT (Just In Time) compiler enabled or not.\n\nDisabling the JavaScript JIT will mean that Microsoft Edge may render web content more slowly, and may also disable parts of JavaScript including WebAssembly. Disabling the JavaScript JIT may allow Microsoft Edge to render web content in a more secure configuration.\n\nThis policy can be overridden for specific URL patterns using the 'JavaScriptJitAllowedForSites' (Allow JavaScript to use JIT on these sites) and 'JavaScriptJitBlockedForSites' (Block JavaScript from using JIT on these sites) policies.\n\nIf you don't configure this policy, JavaScript JIT is enabled.\n\nPolicy options mapping:\n\n* AllowJavaScriptJit (1) = Allow any site to run JavaScript JIT\n\n* BlockJavaScriptJit (2) = Do not allow any site to run JavaScript JIT\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultjavascriptjitsetting"
DefaultJavaScriptJitSetting_Part="Control use of JavaScript JIT"
DefaultJavaScriptJitSetting_AllowJavaScriptJit_DropDown="Allow any site to run JavaScript JIT"
DefaultJavaScriptJitSetting_BlockJavaScriptJit_DropDown="Do not allow any site to run JavaScript JIT"
DefaultPluginsSetting_Policy="Standard Adobe Flash-innstilling (obsolete)"
DefaultPluginsSetting_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 87.\n\nThis policy doesn't work because Flash is no longer supported by Microsoft Edge.\n\n'PluginsAllowedForUrls' (Allow the Adobe Flash plug-in on specific sites) and 'PluginsBlockedForUrls' (Block the Adobe Flash plug-in on specific sites) are checked first, then this policy. The options are 'ClickToPlay' and 'BlockPlugins'. If you set this policy to 'BlockPlugins', this plugin is denied for all websites. 'ClickToPlay' lets the Flash plugin run, but users click the placeholder to start it.\n\nIf you don't configure this policy, the user can change this setting manually.\n\nNote: Automatic playback is only for domains explicitly listed in the 'PluginsAllowedForUrls' policy. To turn automatic playback on for all sites, add http://* and https://* to the allowed list of URLs.\n\nPolicy options mapping:\n\n* BlockPlugins (2) = Blokkér Adobe Flash-programtillegget\n\n* ClickToPlay (3) = Klikk for å spille av\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultpluginssetting"
DefaultPluginsSetting_Part="Standard Adobe Flash-innstilling"
DefaultPluginsSetting_BlockPlugins_DropDown="Blokkér Adobe Flash-programtillegget"
DefaultPluginsSetting_ClickToPlay_DropDown="Klikk for å spille av"
DefaultPopupsSetting_Policy="Default pop-up window setting"
DefaultPopupsSetting_Explain="Set whether websites can show pop-up windows. You can allow them on all websites ('AllowPopups') or block them on all sites ('BlockPopups').\n\nIf you don't configure this policy, pop-up windows are blocked by default, and users can change this setting.\n\nPolicy options mapping:\n\n* AllowPopups (1) = Tillat alle nettsteder å vise forgrunnsvinduer\n\n* BlockPopups (2) = Ikke la noen nettsteder vise forgrunnsvinduer\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultpopupssetting"
DefaultPopupsSetting_Part="Default pop-up window setting"
DefaultPopupsSetting_AllowPopups_DropDown="Tillat alle nettsteder å vise forgrunnsvinduer"
DefaultPopupsSetting_BlockPopups_DropDown="Ikke la noen nettsteder vise forgrunnsvinduer"
DefaultNotificationsSetting_Policy="Standardinnstilling for varslinger"
DefaultNotificationsSetting_Explain="Set whether websites can display desktop notifications. You can allow them by default ('AllowNotifications'), deny them by default ('BlockNotifications'), or have the user be asked each time a website wants to show a notification ('AskNotifications').\n\nIf you don't configure this policy, notifications are allowed by default, and the user can change this setting.\n\nPolicy options mapping:\n\n* AllowNotifications (1) = Tillat nettsteder å vise varsler på skrivebordet\n\n* BlockNotifications (2) = Don't allow any site to show desktop notifications\n\n* AskNotifications (3) = Spør hver gang et nettsted ønsker å vise skrivebordsvarslinger\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultnotificationssetting"
DefaultNotificationsSetting_Part="Standardinnstilling for varslinger"
DefaultNotificationsSetting_AllowNotifications_DropDown="Tillat nettsteder å vise varsler på skrivebordet"
DefaultNotificationsSetting_BlockNotifications_DropDown="Don't allow any site to show desktop notifications"
DefaultNotificationsSetting_AskNotifications_DropDown="Spør hver gang et nettsted ønsker å vise skrivebordsvarslinger"
DefaultGeolocationSetting_Policy="Standardinnstilling for geoposisjonering"
DefaultGeolocationSetting_Explain="Set whether websites can track users' physical locations. You can allow tracking by default ('AllowGeolocation'), deny it by default ('BlockGeolocation'), or ask the user each time a website requests their location ('AskGeolocation').\n\nIf you don't configure this policy, 'AskGeolocation' is used and the user can change it.\n\nPolicy options mapping:\n\n* AllowGeolocation (1) = Allow sites to track users' physical location\n\n* BlockGeolocation (2) = Don't allow any site to track users' physical location\n\n* AskGeolocation (3) = Ask whenever a site wants to track users' physical location\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultgeolocationsetting"
DefaultGeolocationSetting_Part="Standardinnstilling for geoposisjonering"
DefaultGeolocationSetting_AllowGeolocation_DropDown="Allow sites to track users' physical location"
DefaultGeolocationSetting_BlockGeolocation_DropDown="Don't allow any site to track users' physical location"
DefaultGeolocationSetting_AskGeolocation_DropDown="Ask whenever a site wants to track users' physical location"
DefaultWebBluetoothGuardSetting_Policy="Kontrollér bruken av Web Bluetooth API"
DefaultWebBluetoothGuardSetting_Explain="Control whether websites can access nearby Bluetooth devices. You can completely block access or require the site to ask the user each time it wants to access a Bluetooth device.\n\nIf you don't configure this policy, the default value ('AskWebBluetooth', meaning users are asked each time) is used and users can change it.\n\nPolicy options mapping:\n\n* BlockWebBluetooth (2) = Ikke tillat nettsteder å be om tilgang til Bluetooth-enheter via Web Bluetooth API\n\n* AskWebBluetooth (3) = La nettsteder be brukeren om tilgang til Bluetooth-enheter i nærheten\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultwebbluetoothguardsetting"
DefaultWebBluetoothGuardSetting_Part="Kontrollér bruken av Web Bluetooth API"
DefaultWebBluetoothGuardSetting_BlockWebBluetooth_DropDown="Ikke tillat nettsteder å be om tilgang til Bluetooth-enheter via Web Bluetooth API"
DefaultWebBluetoothGuardSetting_AskWebBluetooth_DropDown="La nettsteder be brukeren om tilgang til Bluetooth-enheter i nærheten"
DefaultWebUsbGuardSetting_Policy="Kontrollér bruken av WebUSB API"
DefaultWebUsbGuardSetting_Explain="Set whether websites can access connected USB devices. You can completely block access or ask the user each time a website wants to get access to connected USB devices.\n\nYou can override this policy for specific URL patterns by using the 'WebUsbAskForUrls' (Allow WebUSB on specific sites) and 'WebUsbBlockedForUrls' (Block WebUSB on specific sites) policies.\n\nIf you don't configure this policy, sites can ask users whether they can access the connected USB devices ('AskWebUsb') by default, and users can change this setting.\n\nPolicy options mapping:\n\n* BlockWebUsb (2) = Ikke la noen nettsteder be om tilgang til USB-enheter via WebUSB API\n\n* AskWebUsb (3) = La nettsteder be brukeren om tilgang til tilkoblede USB-enheter\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultwebusbguardsetting"
DefaultWebUsbGuardSetting_Part="Kontrollér bruken av WebUSB API"
DefaultWebUsbGuardSetting_BlockWebUsb_DropDown="Ikke la noen nettsteder be om tilgang til USB-enheter via WebUSB API"
DefaultWebUsbGuardSetting_AskWebUsb_DropDown="La nettsteder be brukeren om tilgang til tilkoblede USB-enheter"
DefaultWebHidGuardSetting_Policy="Control use of the WebHID API"
DefaultWebHidGuardSetting_Explain="Setting the policy to 3 lets websites ask for access to HID devices. Setting the policy to 2 denies access to HID devices.\n\nLeaving it unset lets websites ask for access, but users can change this setting.\n\nThis policy can be overridden for specific url patterns using the 'WebHidAskForUrls' (Allow the WebHID API on these sites) and 'WebHidBlockedForUrls' (Block the WebHID API on these sites) policies.\n\nPolicy options mapping:\n\n* BlockWebHid (2) = Do not allow any site to request access to HID devices via the WebHID API\n\n* AskWebHid (3) = Allow sites to ask the user to grant access to a HID device\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultwebhidguardsetting"
DefaultWebHidGuardSetting_Part="Control use of the WebHID API"
DefaultWebHidGuardSetting_BlockWebHid_DropDown="Do not allow any site to request access to HID devices via the WebHID API"
DefaultWebHidGuardSetting_AskWebHid_DropDown="Allow sites to ask the user to grant access to a HID device"
ShowPDFDefaultRecommendationsEnabled_Policy="Allow notifications to set Microsoft Edge as default PDF reader"
ShowPDFDefaultRecommendationsEnabled_Explain="This policy setting lets you decide whether employees should receive recommendations to set Microsoft Edge as PDF handler.\n\nIf you enable or don't configure this setting, employees receive recommendations from Microsoft Edge to set itself as the default PDF handler.\n\nIf you disable this setting, employees will not receive any notifications from Microsoft Edge to set itself as the default PDF handler.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#showpdfdefaultrecommendationsenabled"
AutoSelectCertificateForUrls_Policy="Automatisk valg av klientsertifikater for disse nettstedene"
AutoSelectCertificateForUrls_Explain="Setting the policy lets you make a list of URL patterns that specify sites for which Microsoft Edge can automatically select a client certificate. The value is an array of stringified JSON dictionaries, each with the form { "pattern": "$URL_PATTERN", "filter" : $FILTER }, where $URL_PATTERN is a content setting pattern. $FILTER restricts the client certificates the browser automatically selects from. Independent of the filter, only certificates that match the server's certificate request are selected.\n\nExamples for the usage of the $FILTER section:\n\n* When $FILTER is set to { "ISSUER": { "CN": "$ISSUER_CN" } }, only client certificates issued by a certificate with the CommonName $ISSUER_CN are selected.\n\n* When $FILTER contains both the "ISSUER" and the "SUBJECT" sections, only client certificates that satisfy both conditions are selected.\n\n* When $FILTER contains a "SUBJECT" section with the "O" value, a certificate needs at least one organization matching the specified value to be selected.\n\n* When $FILTER contains a "SUBJECT" section with a "OU" value, a certificate needs at least one organizational unit matching the specified value to be selected.\n\n* When $FILTER is set to {}, the selection of client certificates is not additionally restricted. Note that filters provided by the web server still apply.\n\nIf you leave the policy unset, there's no autoselection for any site.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#autoselectcertificateforurls"
AutoSelectCertificateForUrls_Part="Automatisk valg av klientsertifikater for disse nettstedene"
CookiesAllowedForUrls_Policy="Allow cookies on specific sites"
CookiesAllowedForUrls_Explain="Define a list of sites, based on URL patterns, that are allowed to set cookies.\n\nIf you don't configure this policy, the global default value from the 'DefaultCookiesSetting' (Configure cookies) policy (if set) or the user's personal configuration is used for all sites.\n\nSee the 'CookiesBlockedForUrls' (Block cookies on specific sites) and 'CookiesSessionOnlyForUrls' (Limit cookies from specific websites to the current session) policies for more information.\n\nNote there cannot be conflicting URL patterns set between these three policies:\n\n- 'CookiesBlockedForUrls'\n\n- CookiesAllowedForUrls\n\n- 'CookiesSessionOnlyForUrls'\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nTo exclude cookies from being deleted on exit, configure the 'SaveCookiesOnExit' (Save cookies when Microsoft Edge closes) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#cookiesallowedforurls"
CookiesAllowedForUrls_Part="Allow cookies on specific sites"
CookiesBlockedForUrls_Policy="Block cookies on specific sites"
CookiesBlockedForUrls_Explain="Define a list of sites, based on URL patterns, that can't set cookies.\n\nIf you don't configure this policy, the global default value from the 'DefaultCookiesSetting' (Configure cookies) policy (if set) or the user's personal configuration is used for all sites.\n\nSee the 'CookiesAllowedForUrls' (Allow cookies on specific sites) and 'CookiesSessionOnlyForUrls' (Limit cookies from specific websites to the current session) policies for more information.\n\nNote there cannot be conflicting URL patterns set between these three policies:\n\n- CookiesBlockedForUrls\n\n- 'CookiesAllowedForUrls'\n\n- 'CookiesSessionOnlyForUrls'\n\nFor detailed information on valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#cookiesblockedforurls"
CookiesBlockedForUrls_Part="Block cookies on specific sites"
CookiesSessionOnlyForUrls_Policy="Limit cookies from specific websites to the current session"
CookiesSessionOnlyForUrls_Explain="Cookies created by websites that match a URL pattern you define are deleted when the session ends (when the window closes).\n\nCookies created by websites that don't match the pattern are controlled by the 'DefaultCookiesSetting' (Configure cookies) policy (if set) or by the user's personal configuration. This is also the default behavior if you don't configure this policy.\n\nYou can also use the 'CookiesAllowedForUrls' (Allow cookies on specific sites) and 'CookiesBlockedForUrls' (Block cookies on specific sites) policies to control which websites can create cookies.\n\nNote there cannot be conflicting URL patterns set between these three policies:\n\n- 'CookiesBlockedForUrls'\n\n- 'CookiesAllowedForUrls'\n\n- CookiesSessionOnlyForUrls\n\nFor detailed information on valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nIf you set the 'RestoreOnStartup' (Action to take on startup) policy to restore URLs from previous sessions, this policy is ignored, and cookies are stored permanently for those sites.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#cookiessessiononlyforurls"
CookiesSessionOnlyForUrls_Part="Limit cookies from specific websites to the current session"
FileSystemReadAskForUrls_Policy="Allow read access via the File System API on these sites"
FileSystemReadAskForUrls_Explain="Setting the policy lets you list the URL patterns that specify which sites can ask users to grant them read access to files or directories in the host operating system's file system via the File System API.\n\nLeaving the policy unset means 'DefaultFileSystemReadGuardSetting' (Control use of the File System API for reading) applies for all sites, if it's set. If not, users' personal settings apply.\n\nURL patterns can't conflict with 'FileSystemReadBlockedForUrls' (Block read access via the File System API on these sites). Neither policy takes precedence if a URL matches with both.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#filesystemreadaskforurls"
FileSystemReadAskForUrls_Part="Allow read access via the File System API on these sites"
FileSystemReadBlockedForUrls_Policy="Block read access via the File System API on these sites"
FileSystemReadBlockedForUrls_Explain="If you set this policy, you can list the URL patterns that specify which sites can't ask users to grant them read access to files or directories in the host operating system's file system via the File System API.\n\nIf you don't set this policy, 'DefaultFileSystemReadGuardSetting' (Control use of the File System API for reading) applies for all sites, if it's set. If not, users' personal settings apply.\n\nURL patterns can't conflict with 'FileSystemReadAskForUrls' (Allow read access via the File System API on these sites). Neither policy takes precedence if a URL matches with both.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#filesystemreadblockedforurls"
FileSystemReadBlockedForUrls_Part="Block read access via the File System API on these sites"
FileSystemWriteAskForUrls_Policy="Allow write access to files and directories on these sites"
FileSystemWriteAskForUrls_Explain="If you set this policy, you can list the URL patterns that specify which sites can ask users to grant them write access to files or directories in the host operating system's file system.\n\nIf you don't set this policy, 'DefaultFileSystemWriteGuardSetting' (Control use of the File System API for writing) applies for all sites, if it's set. If not, users' personal settings apply.\n\nURL patterns can't conflict with 'FileSystemWriteBlockedForUrls' (Block write access to files and directories on these sites). Neither policy takes precedence if a URL matches with both.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#filesystemwriteaskforurls"
FileSystemWriteAskForUrls_Part="Allow write access to files and directories on these sites"
FileSystemWriteBlockedForUrls_Policy="Block write access to files and directories on these sites"
FileSystemWriteBlockedForUrls_Explain="If you set this policy, you can list the URL patterns that specify which sites can't ask users to grant them write access to files or directories in the host operating system's file system.\n\nIf you don't set this policy, 'DefaultFileSystemWriteGuardSetting' (Control use of the File System API for writing) applies for all sites, if it's set. If not, users' personal settings apply.\n\nURL patterns can't conflict with 'FileSystemWriteAskForUrls' (Allow write access to files and directories on these sites). Neither policy takes precedence if a URL matches with both.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#filesystemwriteblockedforurls"
FileSystemWriteBlockedForUrls_Part="Block write access to files and directories on these sites"
SpotlightExperiencesAndRecommendationsEnabled_Policy="Choose whether users can receive customized background images and text, suggestions, notifications, and tips for Microsoft services"
SpotlightExperiencesAndRecommendationsEnabled_Explain="Choose whether users can receive customized background images and text, suggestions, notifications, and tips for Microsoft services.\n\nIf you enable or don't configure this setting, spotlight experiences and recommendations are turned on.\n\nIf you disable this setting, spotlight experiences and recommendations are turned off.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#spotlightexperiencesandrecommendationsenabled"
ImagesAllowedForUrls_Policy="Tillat bilder på disse nettstedene"
ImagesAllowedForUrls_Explain="Define a list of sites, based on URL patterns, that can display images.\n\nIf you don't configure this policy, the global default value is used for all sites either from the 'DefaultImagesSetting' (Standardinnstilling for bilder) policy (if set) or the user's personal configuration.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#imagesallowedforurls"
ImagesAllowedForUrls_Part="Tillat bilder på disse nettstedene"
ImagesBlockedForUrls_Policy="Block images on specific sites"
ImagesBlockedForUrls_Explain="Define a list of sites, based on URL patterns, that aren't allowed to display images.\n\nIf you don't configure this policy, the global default value from the 'DefaultImagesSetting' (Standardinnstilling for bilder) policy (if set) or the user's personal configuration is used for all sites.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#imagesblockedforurls"
ImagesBlockedForUrls_Part="Block images on specific sites"
InsecureContentAllowedForUrls_Policy="Allow insecure content on specified sites"
InsecureContentAllowedForUrls_Explain="Create a list of URL patterns to specify sites that can display or, as of version 94, download insecure mixed content (that is, HTTP content on HTTPS sites).\n\nIf you don't configure this policy, blockable mixed content will be blocked and optionally blockable mixed content will be upgraded. However, users will be allowed to set exceptions to allow insecure mixed content for specific sites.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#insecurecontentallowedforurls"
InsecureContentAllowedForUrls_Part="Allow insecure content on specified sites"
InsecureContentBlockedForUrls_Policy="Block insecure content on specified sites"
InsecureContentBlockedForUrls_Explain="Create a list of URL patterns to specify sites that aren't allowed to display blockable (i.e. active) mixed content (that is, HTTP content on HTTPS sites) and for which optionally blockable mixed content upgrades will be disabled.\n\nIf you don't configure this policy, blockable mixed content will be blocked and optionally blockable mixed content will be upgraded. However, users will be allowed to set exceptions to allow insecure mixed content for specific sites.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#insecurecontentblockedforurls"
InsecureContentBlockedForUrls_Part="Block insecure content on specified sites"
IntranetFileLinksEnabled_Policy="Allow intranet zone file URL links from Microsoft Edge to open in Windows File Explorer"
IntranetFileLinksEnabled_Explain="This setting allows file URL links to intranet zone files from intranet zone HTTPS websites to open Windows File Explorer for that file or directory.\n\nIf you enable this policy, intranet zone file URL links originating from intranet zone HTTPS pages will open Windows File Explorer to the parent directory of the file and select the file. Intranet zone directory URL links originating from intranet zone HTTPS pages will open Windows File Explorer to the directory with no items in the directory selected.\n\nIf you disable or don't configure this policy, file URL links will not open.\n\nMicrosoft Edge uses the definition of intranet zone as configured for Internet Explorer. Note that https://localhost/ is specifically blocked as an exception of allowed intranet zone host, while loopback addresses (127.0.0.*, [::1]) are considered internet zone by default.\n\nUsers may opt out of prompts on a per-protocol/per-site basis unless the 'ExternalProtocolDialogShowAlwaysOpenCheckbox' (Show an "Always open" checkbox in external protocol dialog) policy is disabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#intranetfilelinksenabled"
JavaScriptAllowedForUrls_Policy="Allow JavaScript on specific sites"
JavaScriptAllowedForUrls_Explain="Define a list of sites, based on URL patterns, that are allowed to run JavaScript.\n\nIf you don't configure this policy, 'DefaultJavaScriptSetting' (Standard JavaScript-innstilling) applies for all sites, if it's set. If not, the user's personal setting applies.\n\nFor detailed information on valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#javascriptallowedforurls"
JavaScriptAllowedForUrls_Part="Allow JavaScript on specific sites"
JavaScriptBlockedForUrls_Policy="Block JavaScript on specific sites"
JavaScriptBlockedForUrls_Explain="Define a list of sites, based on URL patterns, that aren't allowed to run JavaScript.\n\nIf you don't configure this policy, 'DefaultJavaScriptSetting' (Standard JavaScript-innstilling) applies for all sites, if it's set. If not, the user's personal setting applies.\n\nFor detailed information on valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#javascriptblockedforurls"
JavaScriptBlockedForUrls_Part="Block JavaScript on specific sites"
JavaScriptJitAllowedForSites_Policy="Allow JavaScript to use JIT on these sites"
JavaScriptJitAllowedForSites_Explain="Allows you to set a list of site url patterns that specify sites which are allowed to run JavaScript with JIT (Just In Time) compiler enabled.\n\nFor detailed information on valid site url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nJavaScript JIT policy exceptions will only be enforced at a site granularity (eTLD+1). A policy set for only subdomain.contoso.com will not correctly apply to contoso.com or subdomain.contoso.com since they both resolve to the same eTLD+1 (contoso.com) for which there is no policy. In this case, policy must be set on contoso.com to apply correctly for both contoso.com and subdomain.contoso.com.\n\nThis policy applies on a frame-by-frame basis and not based on top level origin url alone, so e.g. if contoso.com is listed in the JavaScriptJitAllowedForSites policy but contoso.com loads a frame containing fabrikam.com then contoso.com will have JavaScript JIT enabled, but fabrikam.com will use the policy from 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), if set, or default to JavaScript JIT enabled.\n\nIf you don't configure this policy for a site then the policy from 'DefaultJavaScriptJitSetting' applies to the site, if set, otherwise Javascript JIT is enabled for the site.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#javascriptjitallowedforsites"
JavaScriptJitAllowedForSites_Part="Allow JavaScript to use JIT on these sites"
JavaScriptJitBlockedForSites_Policy="Block JavaScript from using JIT on these sites"
JavaScriptJitBlockedForSites_Explain="Allows you to set a list of site url patterns that specify sites which are not allowed to run JavaScript JIT (Just In Time) compiler enabled.\n\nDisabling the JavaScript JIT will mean that Microsoft Edge may render web content more slowly, and may also disable parts of JavaScript including WebAssembly. Disabling the JavaScript JIT may allow Microsoft Edge to render web content in a more secure configuration.\n\nFor detailed information on valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nJavaScript JIT policy exceptions will only be enforced at a site granularity (eTLD+1). A policy set for only subdomain.contoso.com will not correctly apply to contoso.com or subdomain.contoso.com since they both resolve to the same eTLD+1 (contoso.com) for which there is no policy. In this case, policy must be set on contoso.com to apply correctly for both contoso.com and subdomain.contoso.com.\n\nThis policy applies on a frame-by-frame basis and not based on top level origin url alone, so e.g. if contoso.com is listed in the JavaScriptJitBlockedForSites policy but contoso.com loads a frame containing fabrikam.com then contoso.com will have JavaScript JIT disabled, but fabrikam.com will use the policy from 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), if set, or default to JavaScript JIT enabled.\n\nIf you don't configure this policy for a site then the policy from 'DefaultJavaScriptJitSetting' applies to the site, if set, otherwise JavaScript JIT is enabled for the site.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#javascriptjitblockedforsites"
JavaScriptJitBlockedForSites_Part="Block JavaScript from using JIT on these sites"
LegacySameSiteCookieBehaviorEnabled_Policy="Enable default legacy SameSite cookie behavior setting (obsolete)"
LegacySameSiteCookieBehaviorEnabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 94.\n\nThis policy doesn't work because it was only intended to serve only as a short-term mechanism to give enterprises more time to update their environments if they were found to be incompatible with the SameSite behavior change.\n\nIf you still require legacy cookie behavior, please use 'LegacySameSiteCookieBehaviorEnabledForDomainList' (Revert to legacy SameSite behavior for cookies on specified sites) to configure behavior on a per-domain basis.\n\nLets you revert all cookies to legacy SameSite behavior. Reverting to legacy behavior causes cookies that don't specify a SameSite attribute to be treated as if they were "SameSite=None", removes the requirement for "SameSite=None" cookies to carry the "Secure" attribute, and skips the scheme comparison when evaluating if two sites are same-site.\n\nIf you don't set this policy, the default SameSite behavior for cookies will depend on other configuration sources for the SameSite-by-default feature, the Cookies-without-SameSite-must-be-secure feature, and the Schemeful Same-Site feature. These features can also be configured by a field trial or the same-site-by-default-cookies flag, the cookies-without-same-site-must-be-secure flag, or the schemeful-same-site flag in edge://flags.\n\nPolicy options mapping:\n\n* DefaultToLegacySameSiteCookieBehavior (1) = Revert to legacy SameSite behavior for cookies on all sites\n\n* DefaultToSameSiteByDefaultCookieBehavior (2) = Use SameSite-by-default behavior for cookies on all sites\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#legacysamesitecookiebehaviorenabled"
LegacySameSiteCookieBehaviorEnabled_Part="Enable default legacy SameSite cookie behavior setting"
LegacySameSiteCookieBehaviorEnabled_DefaultToLegacySameSiteCookieBehavior_DropDown="Revert to legacy SameSite behavior for cookies on all sites"
LegacySameSiteCookieBehaviorEnabled_DefaultToSameSiteByDefaultCookieBehavior_DropDown="Use SameSite-by-default behavior for cookies on all sites"
LegacySameSiteCookieBehaviorEnabledForDomainList_Policy="Revert to legacy SameSite behavior for cookies on specified sites"
LegacySameSiteCookieBehaviorEnabledForDomainList_Explain="Cookies set for domains match specified patterns will revert to legacy SameSite behavior.\n\nReverting to legacy behavior causes cookies that don't specify a SameSite attribute to be treated as if they were "SameSite=None", removes the requirement for "SameSite=None" cookies to carry the "Secure" attribute, and skips the scheme comparison when evaluating if two sites are same-site.\n\nIf you don't set this policy, the global default value will be used. The global default will also be used for cookies on domains not covered by the patterns you specify.\n\nThe global default value can be configured using the 'LegacySameSiteCookieBehaviorEnabled' (Enable default legacy SameSite cookie behavior setting) policy. If 'LegacySameSiteCookieBehaviorEnabled' is unset, the global default value falls back to other configuration sources.\n\nNote that patterns you list in this policy are treated as domains, not URLs, so you should not specify a scheme or port.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#legacysamesitecookiebehaviorenabledfordomainlist"
LegacySameSiteCookieBehaviorEnabledForDomainList_Part="Revert to legacy SameSite behavior for cookies on specified sites"
PluginsAllowedForUrls_Policy="Allow the Adobe Flash plug-in on specific sites (obsolete)"
PluginsAllowedForUrls_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 87.\n\nThis policy doesn't work because Flash is no longer supported by Microsoft Edge.\n\nDefine a list of sites, based on URL patterns, that can run the Adobe Flash plug-in.\n\nIf you don't configure this policy, the global default value from the 'DefaultPluginsSetting' (Standard Adobe Flash-innstilling) policy (if set) or the user's personal configuration is used for all sites.\n\nFor detailed information on valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. However, starting in M85, patterns with '*' and '[*.]' wildcards in the host are no longer supported for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#pluginsallowedforurls"
PluginsAllowedForUrls_Part="Allow the Adobe Flash plug-in on specific sites"
PluginsBlockedForUrls_Policy="Block the Adobe Flash plug-in on specific sites (obsolete)"
PluginsBlockedForUrls_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 87.\n\nThis policy doesn't work because Flash is no longer supported by Microsoft Edge.\n\nDefine a list of sites, based on URL patterns, that are blocked from running Adobe Flash.\n\nIf you don't configure this policy, the global default value from the 'DefaultPluginsSetting' (Standard Adobe Flash-innstilling) policy (if set) or the user's personal configuration is used for all sites.\n\nFor detailed information on valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. However, starting in M85, patterns with '*' and '[*.]' wildcards in the host are no longer supported for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#pluginsblockedforurls"
PluginsBlockedForUrls_Part="Block the Adobe Flash plug-in on specific sites"
PopupsAllowedForUrls_Policy="Allow pop-up windows on specific sites"
PopupsAllowedForUrls_Explain="Define a list of sites, based on URL patterns, that can open pop-up windows. * is not an accepted value for this policy.\n\nIf you don't configure this policy, the global default value from the 'DefaultPopupsSetting' (Default pop-up window setting) policy (if set) or the user's personal configuration is used for all sites.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#popupsallowedforurls"
PopupsAllowedForUrls_Part="Allow pop-up windows on specific sites"
PopupsBlockedForUrls_Policy="Block pop-up windows on specific sites"
PopupsBlockedForUrls_Explain="Define a list of sites, based on URL patterns, that are blocked from opening pop-up windows. * is not an accepted value for this policy.\n\nIf you don't configure this policy, the global default value from the 'DefaultPopupsSetting' (Default pop-up window setting) policy (if set) or the user's personal configuration is used for all sites.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#popupsblockedforurls"
PopupsBlockedForUrls_Part="Block pop-up windows on specific sites"
NotificationsAllowedForUrls_Policy="Allow notifications on specific sites"
NotificationsAllowedForUrls_Explain="Allows you to create a list of url patterns to specify sites that are allowed to display notifications.\n\nIf you don't set this policy, the global default value will be used for all sites. This default value will be from the 'DefaultNotificationsSetting' (Standardinnstilling for varslinger) policy if it's set, or from the user's personal configuration. For detailed information on valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#notificationsallowedforurls"
NotificationsAllowedForUrls_Part="Allow notifications on specific sites"
NotificationsBlockedForUrls_Policy="Block notifications on specific sites"
NotificationsBlockedForUrls_Explain="Allows you to create a list of url patterns to specify sites that are not allowed to display notifications.\n\nIf you don't set this policy, the global default value will be used for all sites. This default value will be from the 'DefaultNotificationsSetting' (Standardinnstilling for varslinger) policy if it's set, or from the user's personal configuration. For detailed information on valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#notificationsblockedforurls"
NotificationsBlockedForUrls_Part="Block notifications on specific sites"
SerialAllowAllPortsForUrls_Policy="Automatically grant sites permission to connect all serial ports"
SerialAllowAllPortsForUrls_Explain="Setting the policy allows you to list sites which are automatically granted permission to access all available serial ports.\n\nThe URLs must be valid, or the policy is ignored. Only the origin (scheme, host, and port) of the URL is considered.\n\nThis policy overrides 'DefaultSerialGuardSetting' (Control use of the Serial API), 'SerialAskForUrls' (Allow the Serial API on specific sites), 'SerialBlockedForUrls' (Block the Serial API on specific sites) and the user's preferences.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#serialallowallportsforurls"
SerialAllowAllPortsForUrls_Part="Automatically grant sites permission to connect all serial ports"
SerialAllowUsbDevicesForUrls_Policy="Automatically grant sites permission to connect to USB serial devices"
SerialAllowUsbDevicesForUrls_Explain="Setting the policy lets you list sites that are automatically granted permission to access USB serial devices with vendor and product IDs that match the vendor_id and product_id fields.\n\nOptionally you can omit the product_id field. This enables site access to all the vendor's devices.  When you provide a product ID, then you give the site access to a specific device from the vendor but not all devices.\n\nThe URLs must be valid, or the policy is ignored. Only the origin (scheme, host, and port) of the URL is considered.\n\nThis policy overrides 'DefaultSerialGuardSetting' (Control use of the Serial API), 'SerialAskForUrls' (Allow the Serial API on specific sites), 'SerialBlockedForUrls' (Block the Serial API on specific sites) and the user's preferences.\n\nThis policy only affects access to USB devices through the Web Serial API. To grant access to USB devices through the WebUSB API see the 'WebUsbAllowDevicesForUrls' (Grant access to specific sites to connect to specific USB devices) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#serialallowusbdevicesforurls"
SerialAllowUsbDevicesForUrls_Part="Automatically grant sites permission to connect to USB serial devices"
WebUsbAllowDevicesForUrls_Policy="Grant access to specific sites to connect to specific USB devices"
WebUsbAllowDevicesForUrls_Explain="Allows you to set a list of urls that specify which sites will automatically be granted permission to access a USB device with the given vendor and product IDs. Each item in the list must contain both devices and urls in order for the policy to be valid. Each item in devices can contain a vendor ID and product ID field. Any ID that is omitted is treated as a wildcard with one exception, and that exception is that a product ID cannot be specified without a vendor ID also being specified. Otherwise, the policy will not be valid and will be ignored.\n\nThe USB permission model uses the URL of the requesting site ("requesting URL") and the URL of the top-level frame site ("embedding URL") to grant permission to the requesting URL to access the USB device. The requesting URL may be different than the embedding URL when the requesting site is loaded in an iframe. Therefore, the "urls" field can contain up to two URL strings delimited by a comma to specify the requesting and embedding URL respectively. If only one URL is specified, then access to the corresponding USB devices will be granted when the requesting site's URL matches this URL regardless of embedding status. The URLs in "urls" must be valid URLs, otherwise the policy will be ignored.\n\nIf this policy is left not set, the global default value will be used for all sites either from the 'DefaultWebUsbGuardSetting' (Kontrollér bruken av WebUSB API) policy if it is set, or the user's personal configuration otherwise.\n\nURL patterns in this policy should not clash with the ones configured via 'WebUsbBlockedForUrls' (Block WebUSB on specific sites). If there is a clash, this policy will take precedence over 'WebUsbBlockedForUrls' and 'WebUsbAskForUrls' (Allow WebUSB on specific sites).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webusballowdevicesforurls"
WebUsbAllowDevicesForUrls_Part="Grant access to specific sites to connect to specific USB devices"
WebUsbAskForUrls_Policy="Allow WebUSB on specific sites"
WebUsbAskForUrls_Explain="Define a list of sites, based on URL patterns, that can ask the user for access to a USB device.\n\nIf you don't configure this policy, the global default value from the 'DefaultWebUsbGuardSetting' (Kontrollér bruken av WebUSB API) policy (if set) or the user's personal configuration is used for all sites.\n\nThe URL patterns defined in this policy can't conflict with those configured in the 'WebUsbBlockedForUrls' (Block WebUSB on specific sites) policy - you can't both allow and block a URL. For detailed information on valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webusbaskforurls"
WebUsbAskForUrls_Part="Allow WebUSB on specific sites"
WebUsbBlockedForUrls_Policy="Block WebUSB on specific sites"
WebUsbBlockedForUrls_Explain="Define a list of sites, based on URL patterns, that can't ask the user to grant them access to a USB device.\n\nIf you don't configure this policy, the global default value from the 'DefaultWebUsbGuardSetting' (Kontrollér bruken av WebUSB API) policy (if set) or the user's personal configuration is used for all sites.\n\nURL patterns in this policy can't conflict with those configured in the 'WebUsbAskForUrls' (Allow WebUSB on specific sites) policy. You can't both allow and block a URL.  For detailed information on valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webusbblockedforurls"
WebUsbBlockedForUrls_Part="Block WebUSB on specific sites"
WebHidAskForUrls_Policy="Allow the WebHID API on these sites"
WebHidAskForUrls_Explain="Setting the policy lets you list the URL patterns that specify which sites can ask users to grant them access to a HID device.\n\nLeaving the policy unset means 'DefaultWebHidGuardSetting' (Control use of the WebHID API) applies for all sites, if it's set. If not, users' personal settings apply.\n\nFor URL patterns that don't match the policy, the following values are applied in order of precedence:\n\n  * 'WebHidBlockedForUrls' (Block the WebHID API on these sites) (if there is a match),\n\n  * 'DefaultWebHidGuardSetting' (if set), or\n\n  * Users' personal settings.\n\nURL patterns must not conflict with 'WebHidBlockedForUrls'. Neither policy takes precedence if a URL matches both patterns.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webhidaskforurls"
WebHidAskForUrls_Part="Allow the WebHID API on these sites"
WebHidBlockedForUrls_Policy="Block the WebHID API on these sites"
WebHidBlockedForUrls_Explain="Setting the policy lets you list the URL patterns that specify which sites can't ask users to grant them access to a HID device.\n\nLeaving the policy unset means 'DefaultWebHidGuardSetting' (Control use of the WebHID API) applies for all sites, if it's set. If not, users' personal settings apply.\n\nFor URL patterns that don't match the policy, the following values are applied in order of precedence:\n\n  * 'WebHidAskForUrls' (Allow the WebHID API on these sites) (if there is a match),\n\n  * 'DefaultWebHidGuardSetting' (if set), or\n\n  * Users' personal settings.\n\nURL patterns can't conflict with 'WebHidAskForUrls'. Neither policy takes precedence if a URL matches both patterns.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webhidblockedforurls"
WebHidBlockedForUrls_Part="Block the WebHID API on these sites"
RegisteredProtocolHandlers_Policy="Registrer protokollbehandlere"
RegisteredProtocolHandlers_Explain="Set this policy (recommended only) to register a list of protocol handlers. This list is merged with ones registered by the user and both are available to use.\n\nTo register a protocol handler:\n\n- Set the protocol property to the scheme (for example, "mailto")\n- Set the URL property to the URL property of the application that handlers the scheme specified in the "protocol" field. The pattern can include a "%s" placeholder, which the handled URL replaces.\n\nUsers can't remove a protocol handler registered by this policy. However, they can install a new default protocol handler to override the existing protocol handlers.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#registeredprotocolhandlers"
RegisteredProtocolHandlers_Part="Registrer protokollbehandlere"
KioskMode_Category="Kiosk Mode settings"
KioskAddressBarEditingEnabled_Policy="Configure address bar editing for kiosk mode public browsing experience"
KioskAddressBarEditingEnabled_Explain="This policy only applies to Microsoft Edge kiosk mode while using the public browsing experience.\n\nIf you enable or don't configure this policy, users can change the URL in the address bar.\n\nIf you disable this policy, it prevents users from changing the URL in the address bar.\n\nFor detailed information on configuring kiosk Mode, see https://go.microsoft.com/fwlink/?linkid=2137578.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#kioskaddressbareditingenabled"
KioskDeleteDownloadsOnExit_Policy="Delete files downloaded as part of kiosk session when Microsoft Edge closes"
KioskDeleteDownloadsOnExit_Explain="This policy only applies to Microsoft Edge kiosk mode.\n\nIf you enable this policy, files downloaded as part of the kiosk session are deleted each time Microsoft Edge closes.\n\nIf you disable this policy or don't configure it, files downloaded as part of the kiosk session are not deleted when Microsoft Edge closes.\n\nFor detailed information on configuring kiosk Mode, see https://go.microsoft.com/fwlink/?linkid=2137578.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#kioskdeletedownloadsonexit"
KioskSwipeGesturesEnabled_Policy="Swipe gestures in Microsoft Edge kiosk mode enabled"
KioskSwipeGesturesEnabled_Explain="This policy only applies to Microsoft Edge kiosk mode.\n\nIf you enable this policy or don't configure it, swipe gestures will behave as expected.\n\nIf you disable this policy, the user will not be able to use swipe gestures (for example navigate forwards and backwards, refresh page).\n\nFor detailed information on configuring kiosk mode, see https://go.microsoft.com/fwlink/?linkid=2137578.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#kioskswipegesturesenabled"
Manageability_Category="Manageability"
MAMEnabled_Policy="Mobile App Management Enabled"
MAMEnabled_Explain="Allows the Microsoft Edge browser to retrieve policies from the Intune application management services and apply them to users' profiles.\n\nIf you enable this policy or don't configure it, Mobile App Management (MAM) Policies can be applied.\n\nIf you disable this policy, Microsoft Edge will not communicate with Intune to request MAM Policies.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#mamenabled"
PasswordManager_Category="Password manager and protection"
PasswordManagerEnabled_Policy="Slå på lagring av passord i passordlagringsfunksjonen"
PasswordManagerEnabled_Explain="Enable Microsoft Edge to save user passwords. The next time a user visits a site with a saved password, Microsoft Edge will enter the password automatically.\n\nIf you enable or don't configure this policy, users can save and add their passwords in Microsoft Edge.\n\nIf you disable this policy, users can't save and add new passwords, but they can still use previously saved passwords.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#passwordmanagerenabled"
PasswordManagerBlocklist_Policy="Configure the list of domains for which the password manager UI (Save and Fill) will be disabled"
PasswordManagerBlocklist_Explain="Configure the list of domains where Microsoft Edge should disable the password manager. This means that Save and Fill workflows will be disabled, ensuring that passwords for those websites can't be saved or auto filled into web forms.\n\nIf you enable this policy, the password manager will be disabled for the specified set of domains.\n\nIf you disable or don't configure this policy, password manager will work as usual for all domains.\n\nIf you configure this policy, that is, add domains for which password manager is blocked, users can't change or override the behavior in Microsoft Edge. In addition, users can't use password manager for those URLs.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#passwordmanagerblocklist"
PasswordManagerBlocklist_Part="Configure the list of domains for which the password manager UI (Save and Fill) will be disabled"
PasswordProtectionWarningTrigger_Policy="Configure password protection warning trigger"
PasswordProtectionWarningTrigger_Explain="Allows you to control when to trigger password protection warning. Password protection alerts users when they reuse their protected password on potentially suspicious sites.\n\nYou can use the 'PasswordProtectionLoginURLs' (Configure the list of enterprise login URLs where the password protection service should capture salted hashes of a password) and 'PasswordProtectionChangePasswordURL' (Configure the change password URL) policies to configure which passwords to protect.\n\nExemptions: Passwords for the sites listed in 'PasswordProtectionLoginURLs' and 'PasswordProtectionChangePasswordURL', as well as for the sites listed in 'SmartScreenAllowListDomains' (Configure the list of domains for which Microsoft Defender SmartScreen won't trigger warnings), will not trigger a password-protection warning.\n\nSet to 'PasswordProtectionWarningOff' to not show password protection warningss.\n\nSet to 'PasswordProtectionWarningOnPasswordReuse' to show password protection warnings when the user reuses their protected password on a non-allowlisted site.\n\nIf you disable or don't configure this policy, then the warning trigger is not shown.\n\nPolicy options mapping:\n\n* PasswordProtectionWarningOff (0) = Advarsler om passordbeskyttelse er slått av\n\n* PasswordProtectionWarningOnPasswordReuse (1) = Advarselen om passordbeskyttelse utløses ved gjenbruk av passord\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#passwordprotectionwarningtrigger"
PasswordProtectionWarningTrigger_Part="Configure password protection warning trigger"
PasswordProtectionWarningTrigger_PasswordProtectionWarningOff_DropDown="Advarsler om passordbeskyttelse er slått av"
PasswordProtectionWarningTrigger_PasswordProtectionWarningOnPasswordReuse_DropDown="Advarselen om passordbeskyttelse utløses ved gjenbruk av passord"
PasswordProtectionLoginURLs_Policy="Configure the list of enterprise login URLs where the password protection service should capture salted hashes of a password"
PasswordProtectionLoginURLs_Explain="Configure the list of enterprise login URLs (HTTP and HTTPS schemes only) where Microsoft Edge should capture the salted hashes of passwords and use it for password reuse detection.\n\nIf you enable this policy, the password protection service captures fingerprints of passwords on the defined URLs.\n\nIf you disable this policy or don't configure it, no password fingerprints are captured.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#passwordprotectionloginurls"
PasswordProtectionLoginURLs_Part="Configure the list of enterprise login URLs where the password protection service should capture salted hashes of a password"
PasswordProtectionChangePasswordURL_Policy="Configure the change password URL"
PasswordProtectionChangePasswordURL_Explain="Configures the change password URL (HTTP and HTTPS schemes only).\n\nPassword protection service will send users to this URL to change their password after seeing a warning in the browser.\n\nIf you enable this policy, then password protection service sends users to this URL to change their password.\n\nIf you disable this policy or don't configure it, then password protection service will not redirect users to a change password URL.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#passwordprotectionchangepasswordurl"
PasswordProtectionChangePasswordURL_Part="Configure the change password URL"
PasswordMonitorAllowed_Policy="Allow users to be alerted if their passwords are found to be unsafe"
PasswordMonitorAllowed_Explain="Allow Microsoft Edge to monitor user passwords.\n\nIf you enable this policy and a user consents to enabling the policy, the user will get alerted if any of their passwords stored in Microsoft Edge are found to be unsafe. Microsoft Edge will show an alert and this information will also be available in Settings > Passwords > Password Monitor.\n\nIf you disable this policy, users will not be asked for permission to enable this feature. Their passwords will not be scanned and they will not be alerted either.\n\nIf you enable or don't configure the policy, users can turn this feature on or off.\n\nTo learn more about how Microsoft Edge finds unsafe passwords see https://go.microsoft.com/fwlink/?linkid=2133833\n\nAdditional guidance:\n\nThis policy can be set as both Recommended as well as Mandatory, however with an important callout.\n\nMandatory enabled: Given that individual user consent is a pre-condition to enabling this feature for a given user, this policy does not have a Mandatory enabled setting. If the policy is set to Mandatory enabled, the UI in Settings will not change and the following error message will be displayed in edge://policy\n\nExample Error state message: "This policy value is ignored because Password Monitor requires the consent of the individual user for it to be turned on. You can ask users in your Organization to go to Settings > Profile > Password and turn on the feature."\n\nRecommended enabled: If the policy is set to Recommended enabled, the UI in Settings will remain in 'Off' state, but a briefcase icon will be made visible next to it with this description displayed on hover - "Your organization recommends a specific value for this setting and you have chosen a different value"\n\nMandatory and Recommended disabled: Both these states will work the normal way, with the usual captions being shown to users.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#passwordmonitorallowed"
PasswordGeneratorEnabled_Policy="Allow users to get a strong password suggestion whenever they are creating an account online"
PasswordGeneratorEnabled_Explain="Configures the Password Generator Settings toggle that enables/disables the feature for users.\n\nIf you enable or don't configure this policy, then Password Generator will offer users a strong and unique password suggestion (via a dropdown) on Signup and Change Password pages.\n\nIf you disable this policy, users will no longer see strong password suggestions on Signup or Change Password pages.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#passwordgeneratorenabled"
PrimaryPasswordSetting_Policy="Configures a setting that asks users to enter their device password while using password autofill"
PrimaryPasswordSetting_Explain="The feature helps users add an additional layer of privacy to their online accounts by requiring device authentication (as a way of confirming the user's identity) before the saved password is auto-filled into a web form. This ensures that non-authorized persons can't use saved passwords for autofill.\n\nThis group policy configures the radio button selector that enables this feature for users. It also has a frequency control where users can specify how often they would like to be prompted for authentication.\n\nIf you set this policy to 'Automatically, disable this policy, or don't configure this policy, autofill will not have any authentication flow.'\n\nIf you set this policy to 'With device password', then users will need to enter their device password (or preferred mode of authentication under Windows Hello if on Windows - PIN, face recognition or fingerprint and equivalent options on mac) to prove their identity, and only then will their password get auto-filled. Also, The frequency for authentication prompt would be set to 'Always' by default, however users can change it to the other option as well which is 'Once every browsing session'.\n\nPolicy options mapping:\n\n* Automatically (0) = Automatically\n\n* WithDevicePassword (1) = With device password\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#primarypasswordsetting"
PrimaryPasswordSetting_Part="Configures a setting that asks users to enter their device password while using password autofill"
PrimaryPasswordSetting_Automatically_DropDown="Automatically"
PrimaryPasswordSetting_WithDevicePassword_DropDown="With device password"
PasswordRevealEnabled_Policy="Enable Password reveal button"
PasswordRevealEnabled_Explain="Lets you configure the default display of the browser password reveal button for password input fields on websites.\n\nIf you enable or don't configure this policy, the browser user setting defaults to displaying the password reveal button.\n\nIf you disable this policy, the browser user setting won't display the password reveal button.\n\nFor accessibility, users can change the browser setting from the default policy.\n\nThis policy only affects the browser password reveal button, it doesn't affect websites' custom reveal buttons.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#passwordrevealenabled"
Performance_Category="Performance"
StartupBoostEnabled_Policy="Enable startup boost"
StartupBoostEnabled_Explain="Allows Microsoft Edge processes to start at OS sign-in and restart in background after the last browser window is closed.\n\nIf Microsoft Edge is running in background mode, the browser might not close when the last window is closed and the browser won't be restarted in background when the window closes. See the 'BackgroundModeEnabled' (Continue running background apps after Microsoft Edge closes) policy for information about what happens after configuring Microsoft Edge background mode behavior.\n\nIf you enable this policy, startup boost is turned on.\n\nIf you disable this policy, startup boost is turned off.\n\nIf you don't configure this policy, startup boost may initially be off or on. The user can configure its behavior in edge://settings/system.\n\nLearn more about startup boost: https://go.microsoft.com/fwlink/?linkid=2147018\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#startupboostenabled"
EfficiencyMode_Policy="Configure when efficiency mode should become active"
EfficiencyMode_Explain="This policy setting lets you configure when efficiency mode will become active. By default, efficiency mode will be active when the device is unplugged and the battery is low. On devices with no battery, the default is for efficiency mode to never become active.\n\nSet this policy to 'AlwaysActive' and efficiency mode will always be active.\n\nSet this policy to 'NeverActive' and efficiency mode will never become active.\n\nSet this policy to 'ActiveWhenUnplugged' and efficiency mode will become active when the device is unplugged. If the device does not have a battery, efficiency mode will never become active.\n\nSet this policy to 'ActiveWhenUnpluggedBatteryLow' and efficiency mode will become active when the device is unplugged and the battery is low. If the device does not have a battery, efficiency mode will never become active.\n\nIf you don't configure this policy, users can choose the efficiency mode option in edge://settings/system.\n\nLearn more about efficiency mode: https://go.microsoft.com/fwlink/?linkid=2173921\n\nPolicy options mapping:\n\n* AlwaysActive (0) = Efficiency mode is always active\n\n* NeverActive (1) = Efficiency mode is never active\n\n* ActiveWhenUnplugged (2) = Efficiency mode is active when the device is unplugged\n\n* ActiveWhenUnpluggedBatteryLow (3) = Efficiency mode is active when the device is unplugged and the battery is low\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#efficiencymode"
EfficiencyMode_Part="Configure when efficiency mode should become active"
EfficiencyMode_AlwaysActive_DropDown="Efficiency mode is always active"
EfficiencyMode_NeverActive_DropDown="Efficiency mode is never active"
EfficiencyMode_ActiveWhenUnplugged_DropDown="Efficiency mode is active when the device is unplugged"
EfficiencyMode_ActiveWhenUnpluggedBatteryLow_DropDown="Efficiency mode is active when the device is unplugged and the battery is low"
ScreenCapture_Category="Permit or deny screen capture"
ScreenCaptureAllowedByOrigins_Policy="Allow Desktop, Window, and Tab capture by these origins"
ScreenCaptureAllowedByOrigins_Explain="Setting the policy lets you set a list of URL patterns that can use Desktop, Window, and Tab Capture.\n\nLeaving the policy unset means that sites will not be considered for an override at this scope of Capture.\n\nThis policy is not considered if a site matches a URL pattern in any of the following policies: 'WindowCaptureAllowedByOrigins' (Allow Window and Tab capture by these origins), 'TabCaptureAllowedByOrigins' (Allow Tab capture by these origins), 'SameOriginTabCaptureAllowedByOrigins' (Allow Same Origin Tab capture by these origins).\n\nIf a site matches a URL pattern in this policy, the 'ScreenCaptureAllowed' (Allow or deny screen capture) will not be considered.\n\nFor detailed information on valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322.  This policy only matches based on origin, so any path in the URL pattern is ignored.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#screencaptureallowedbyorigins"
ScreenCaptureAllowedByOrigins_Part="Allow Desktop, Window, and Tab capture by these origins"
WindowCaptureAllowedByOrigins_Policy="Allow Window and Tab capture by these origins"
WindowCaptureAllowedByOrigins_Explain="Setting the policy lets you set a list of URL patterns that can use Window and Tab Capture.\n\nLeaving the policy unset means that sites will not be considered for an override at this scope of Capture.\n\nThis policy is not considered if a site matches a URL pattern in any of the following policies: 'TabCaptureAllowedByOrigins' (Allow Tab capture by these origins), 'SameOriginTabCaptureAllowedByOrigins' (Allow Same Origin Tab capture by these origins).\n\nIf a site matches a URL pattern in this policy, the following policies will not be considered: 'ScreenCaptureAllowedByOrigins' (Allow Desktop, Window, and Tab capture by these origins), 'ScreenCaptureAllowed' (Allow or deny screen capture).\n\nFor detailed information on valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322.  This policy only matches based on origin, so any path in the URL pattern is ignored.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#windowcaptureallowedbyorigins"
WindowCaptureAllowedByOrigins_Part="Allow Window and Tab capture by these origins"
TabCaptureAllowedByOrigins_Policy="Allow Tab capture by these origins"
TabCaptureAllowedByOrigins_Explain="Setting the policy lets you set a list of URL patterns that can use Tab Capture.\n\nLeaving the policy unset means that sites will not be considered for an override at this scope of capture.\n\nThis policy is not considered if a site matches a URL pattern in the 'SameOriginTabCaptureAllowedByOrigins' (Allow Same Origin Tab capture by these origins) policy.\n\nIf a site matches a URL pattern in this policy, the following policies will not be considered: 'WindowCaptureAllowedByOrigins' (Allow Window and Tab capture by these origins), 'ScreenCaptureAllowedByOrigins' (Allow Desktop, Window, and Tab capture by these origins), 'ScreenCaptureAllowed' (Allow or deny screen capture).\n\nFor detailed information on valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322.  This policy only matches based on origin, so any path in the URL pattern is ignored.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#tabcaptureallowedbyorigins"
TabCaptureAllowedByOrigins_Part="Allow Tab capture by these origins"
SameOriginTabCaptureAllowedByOrigins_Policy="Allow Same Origin Tab capture by these origins"
SameOriginTabCaptureAllowedByOrigins_Explain="Setting the policy lets you set a list of URL patterns that can capture tabs with their same Origin.\n\nLeaving the policy unset means that sites will not be considered for an override at this scope of capture.\n\nIf a site matches a URL pattern in this policy, the following policies will not be considered: 'TabCaptureAllowedByOrigins' (Allow Tab capture by these origins), 'WindowCaptureAllowedByOrigins' (Allow Window and Tab capture by these origins), 'ScreenCaptureAllowedByOrigins' (Allow Desktop, Window, and Tab capture by these origins), 'ScreenCaptureAllowed' (Allow or deny screen capture).\n\nFor detailed information on valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322.  This policy only matches based on origin, so any path in the URL pattern is ignored.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sameorigintabcaptureallowedbyorigins"
SameOriginTabCaptureAllowedByOrigins_Part="Allow Same Origin Tab capture by these origins"
PrivateNetworkRequestSettings_Category="Private Network Request Settings"
InsecurePrivateNetworkRequestsAllowed_Policy="Specifies whether to allow insecure websites to make requests to more-private network endpoints"
InsecurePrivateNetworkRequestsAllowed_Explain="Controls whether insecure websites are allowed to make requests to more-private network endpoints.\n\nThis policy relates to the Private Network Access specification. See https://wicg.github.io/private-network-access/ for more details.\n\nA network endpoint is more private than another if:\n1) Its IP address is localhost and the other is not.\n2) Its IP address is private and the other is public.\nIn the future, depending on spec evolution, this policy might apply to all cross-origin requests directed at private IPs or localhost.\n\nA website is deemed secure if it meets the definition of a secure context in https://developer.mozilla.org/en-US/docs/Web/Security/Secure_Contexts. Otherwise, it will be treated as an insecure context.\n\nWhen this policy is either not set or set to false, the default behavior for requests from insecure contexts to more-private network endpoints will depend on the user's personal configuration for the BlockInsecurePrivateNetworkRequests feature, which may be set by a field trial or on the command line.\n\nWhen this policy is set to true, insecure websites are allowed to make requests to any network endpoint, subject to other cross-origin checks.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#insecureprivatenetworkrequestsallowed"
InsecurePrivateNetworkRequestsAllowedForUrls_Policy="Allow the listed sites to make requests to more-private network endpoints from insecure contexts"
InsecurePrivateNetworkRequestsAllowedForUrls_Explain="List of URL patterns. Private network requests initiated from insecure websites served by matching origins are allowed.\n\nIf this policy is not set, this policy behaves as if set to the empty list.\n\nFor origins not covered by the patterns specified here, the global default value will be used either from the 'InsecurePrivateNetworkRequestsAllowed' (Specifies whether to allow insecure websites to make requests to more-private network endpoints) policy, if it is set, or the user's personal configuration otherwise.\n\nNote that this policy only affects insecure origins, so secure origins (e.g. https://example.com) included in this list will be ignored.\n\nFor detailed information on valid URL patterns, see [Filter format for URL list-based policies](/DeployEdge/edge-learnmmore-url-list-filter%20format).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#insecureprivatenetworkrequestsallowedforurls"
InsecurePrivateNetworkRequestsAllowedForUrls_Part="Allow the listed sites to make requests to more-private network endpoints from insecure contexts"
Proxy_Category="Proxytjener"
ProxyMode_Policy="Configure proxy server settings (deprecated)"
ProxyMode_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nThis policy is deprecated, use 'ProxySettings' (Innstillinger for proxy-tjener) instead. It won't work in Microsoft Edge version 91.\n\nIf you set this policy to Enabled you can specify the proxy server Microsoft Edge uses and prevents users from changing proxy settings. Microsoft Edge ignores all proxy-related options specified from the command line. The policy is only applied if the 'ProxySettings' policy isn't specified.\n\nOther options are ignored if you choose one of the following options:\n  * direct = Never use a proxy server and always connect directly\n  * system = Use system proxy settings\n  * auto_detect = Auto detect the proxy server\n\nIf you choose to use:\n  * fixed_servers = Fixed proxy servers. You can specify further options with 'ProxyServer' (Configure address or URL of proxy server) and 'ProxyBypassList' (Configure proxy bypass rules).\n  * pac_script =  A .pac proxy script. Use 'ProxyPacUrl' (Set the proxy .pac file URL) to set the URL to a proxy .pac file.\n\nFor detailed examples, go to https://go.microsoft.com/fwlink/?linkid=2094936.\n\nIf you don't configure this policy, users can choose their own proxy settings.\n\nPolicy options mapping:\n\n* ProxyDisabled (direct) = Aldri bruk mellomtjener\n\n* ProxyAutoDetect (auto_detect) = Gjenkjenn mellomtjenerinnstillinger automatisk\n\n* ProxyPacScript (pac_script) = Bruk et PAC-skript for proxy-tjenere\n\n* ProxyFixedServers (fixed_servers) = Bruk faste proxytjenere\n\n* ProxyUseSystem (system) = Bruk proxyinnstillingene for systemet\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#proxymode"
ProxyMode_Part="Configure proxy server settings"
ProxyMode_ProxyDisabled_DropDown="Aldri bruk mellomtjener"
ProxyMode_ProxyAutoDetect_DropDown="Gjenkjenn mellomtjenerinnstillinger automatisk"
ProxyMode_ProxyPacScript_DropDown="Bruk et PAC-skript for proxy-tjenere"
ProxyMode_ProxyFixedServers_DropDown="Bruk faste proxytjenere"
ProxyMode_ProxyUseSystem_DropDown="Bruk proxyinnstillingene for systemet"
ProxyServer_Policy="Configure address or URL of proxy server (deprecated)"
ProxyServer_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nThis policy is deprecated, use 'ProxySettings' (Innstillinger for proxy-tjener) instead. It won't work in Microsoft Edge version 91.\n\nSpecifies the URL of the proxy server.\n\nThis policy is applied only if the 'ProxySettings' policy isn't specified and you have selected fixed_servers in the 'ProxyMode' (Configure proxy server settings) policy. If you selected any other mode for configuring proxy policies, don't enable or configure this policy.\n\nIf you enable this policy, the proxy server configured by this policy will be used for all URLs.\n\nIf you disable or don't configure this policy, users can choose their own proxy settings while in this proxy mode. Leave this policy unconfigured if you've specified any other method for setting proxy policies.\n\nFor more options and detailed examples, see https://go.microsoft.com/fwlink/?linkid=2094936.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#proxyserver"
ProxyServer_Part="Configure address or URL of proxy server"
ProxyPacUrl_Policy="Set the proxy .pac file URL (deprecated)"
ProxyPacUrl_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nThis policy is deprecated, use 'ProxySettings' (Innstillinger for proxy-tjener) instead. It won't work in Microsoft Edge version 91.\n\nSpecifies the URL for a proxy auto-config (PAC) file.\n\nThis policy is applied only if the 'ProxySettings' policy isn't specified and you have selected pac_script in the 'ProxyMode' (Configure proxy server settings) policy. If you selected any other mode for configuring proxy policies, don't enable or configure this policy.\n\nIf you enable this policy, you can specify the URL for a PAC file, which defines how the browser automatically chooses the appropriate proxy server for fetching a particular website.\n\nIf you disable or don't configure this policy, no PAC file is specified. Leave this policy unconfigured if you've specified any other method for setting proxy policies.\n\nFor detailed examples, see https://go.microsoft.com/fwlink/?linkid=2094936.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#proxypacurl"
ProxyPacUrl_Part="Set the proxy .pac file URL"
ProxyBypassList_Policy="Configure proxy bypass rules (deprecated)"
ProxyBypassList_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nThis policy is deprecated, use 'ProxySettings' (Innstillinger for proxy-tjener) instead. It won't work in Microsoft Edge version 91.\n\nDefines a list of hosts for which Microsoft Edge bypasses any proxy.\n\nThis policy is applied only if the 'ProxySettings' policy isn't specified and you have selected either fixed_servers or pac_script in the 'ProxyMode' (Configure proxy server settings) policy. If you selected any other mode for configuring proxy policies, don't enable or configure this policy.\n\nIf you enable this policy, you can create a list of hosts for which Microsoft Edge doesn't use a proxy.\n\nIf you don't configure this policy, no list of hosts is created for which Microsoft Edge bypasses a proxy. Leave this policy unconfigured if you've specified any other method for setting proxy policies.\n\nFor more detailed examples go to https://go.microsoft.com/fwlink/?linkid=2094936.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#proxybypasslist"
ProxyBypassList_Part="Kommadelt liste over regler for å omgå proxy-tjener"
ProxySettings_Policy="Innstillinger for proxy-tjener"
ProxySettings_Explain="Configures the proxy settings for Microsoft Edge.\n\nIf you enable this policy, Microsoft Edge ignores all proxy-related options specified from the command line.\n\nIf you don't configure this policy, users can choose their own proxy settings.\n\nThis policy overrides the following individual policies:\n\n'ProxyMode' (Configure proxy server settings)\n'ProxyPacUrl' (Set the proxy .pac file URL)\n'ProxyServer' (Configure address or URL of proxy server)\n'ProxyBypassList' (Configure proxy bypass rules)\n\nSetting the 'ProxySettings' (Innstillinger for proxy-tjener) policy accepts the following fields:\n  * ProxyMode, which lets you specify the proxy server used by Microsoft Edge and prevents users from changing proxy settings\n  * ProxyPacUrl, a URL to a proxy .pac file\n  * ProxyPacMandatory, a boolean flag which prevents the network stack from falling back to direct connections with invalid or unavailable PAC script\n  * ProxyServer, a URL for the proxy server\n  * ProxyBypassList, a list of proxy hosts that Microsoft Edge bypasses\n\nFor ProxyMode, if you choose the value:\n  * direct, a proxy is never used and all other fields are ignored.\n  * system, the systems's proxy is used and all other fields are ignored.\n  * auto_detect, all other fields are ignored.\n  * fixed_servers, the ProxyServer and ProxyBypassList fields are used.\n  * pac_script, the ProxyPacUrl, ProxyPacMandatory and ProxyBypassList fields are used.\n\nFor more detailed examples go to https://go.microsoft.com/fwlink/?linkid=2094936.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#proxysettings"
ProxySettings_Part="Innstillinger for proxy-tjener"
SleepingTabs_Category="Sleeping tabs settings"
SleepingTabsEnabled_Policy="Configure sleeping tabs"
SleepingTabsEnabled_Explain="This policy setting lets you configure whether to turn on sleeping tabs. Sleeping tabs reduces CPU, battery, and memory usage by putting idle background tabs to sleep. Microsoft Edge uses heuristics to avoid putting tabs to sleep that do useful work in the background, such as display notifications, play sound, and stream video. By default, sleeping tabs is turned on.\n\nIndividual sites may be blocked from being put to sleep by configuring the policy 'SleepingTabsBlockedForUrls' (Block sleeping tabs on specific sites).\n\nIf you enable this setting, sleeping tabs is turned on.\n\nIf you disable this setting, sleeping tabs is turned off.\n\nIf you don't configure this setting, users can choose whether to use sleeping tabs.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sleepingtabsenabled"
SleepingTabsTimeout_Policy="Set the background tab inactivity timeout for sleeping tabs"
SleepingTabsTimeout_Explain="This policy setting lets you configure the timeout, in seconds, after which inactive background tabs will be automatically put to sleep if sleeping tabs is enabled. By default, this timeout is 7,200 seconds (2 hours).\n\nTabs are only put to sleep automatically when the policy 'SleepingTabsEnabled' (Configure sleeping tabs) is enabled or is not configured and the user has enabled the sleeping tabs setting.\n\nIf you don't configure this policy, users can choose the timeout value.\n\nPolicy options mapping:\n\n* 5Minutes (300) = 5 minutes of inactivity\n\n* 15Minutes (900) = 15 minutes of inactivity\n\n* 30Minutes (1800) = 30 minutes of inactivity\n\n* 1Hour (3600) = 1 hour of inactivity\n\n* 2Hours (7200) = 2 hours of inactivity\n\n* 3Hours (10800) = 3 hours of inactivity\n\n* 6Hours (21600) = 6 hours of inactivity\n\n* 12Hours (43200) = 12 hours of inactivity\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sleepingtabstimeout"
SleepingTabsTimeout_Part="Set the background tab inactivity timeout for sleeping tabs"
SleepingTabsTimeout_5Minutes_DropDown="5 minutes of inactivity"
SleepingTabsTimeout_15Minutes_DropDown="15 minutes of inactivity"
SleepingTabsTimeout_30Minutes_DropDown="30 minutes of inactivity"
SleepingTabsTimeout_1Hour_DropDown="1 hour of inactivity"
SleepingTabsTimeout_2Hours_DropDown="2 hours of inactivity"
SleepingTabsTimeout_3Hours_DropDown="3 hours of inactivity"
SleepingTabsTimeout_6Hours_DropDown="6 hours of inactivity"
SleepingTabsTimeout_12Hours_DropDown="12 hours of inactivity"
SleepingTabsBlockedForUrls_Policy="Block sleeping tabs on specific sites"
SleepingTabsBlockedForUrls_Explain="Define a list of sites, based on URL patterns, that are not allowed to be put to sleep by sleeping tabs.\n\nIf the policy 'SleepingTabsEnabled' (Configure sleeping tabs) is disabled, this list is not used and no sites will be put to sleep automatically.\n\nIf you don't configure this policy, all sites will be eligible to be put to sleep unless the user's personal configuration blocks them.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sleepingtabsblockedforurls"
SleepingTabsBlockedForUrls_Part="Block sleeping tabs on specific sites"
SmartScreen_Category="SmartScreen settings"
SmartScreenEnabled_Policy="Configure Microsoft Defender SmartScreen"
SmartScreenEnabled_Explain="This policy setting lets you configure whether to turn on Microsoft Defender SmartScreen. Microsoft Defender SmartScreen provides warning messages to help protect your users from potential phishing scams and malicious software. By default, Microsoft Defender SmartScreen is turned on.\n\nIf you enable this setting, Microsoft Defender SmartScreen is turned on.\n\nIf you disable this setting, Microsoft Defender SmartScreen is turned off.\n\nIf you don't configure this setting, users can choose whether to use Microsoft Defender SmartScreen.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#smartscreenenabled"
NewSmartScreenLibraryEnabled_Policy="Enable new SmartScreen library"
NewSmartScreenLibraryEnabled_Explain="Allows the Microsoft Edge browser to load new SmartScreen library (libSmartScreenN) for any SmartScreen checks on site URLs or application downloads.\n\nIf you enable this policy, Microsoft Edge will use SmartScreen implementation from new library (libSmartScreenN).\n\nIf you disable or don't configure this policy, Microsoft Edge will continue using the SmartScreen implementation from old library (libSmartScreen).\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nThis temporary policy was created to support the update of a new SmartScreen client. This policy will be deprecated and removed along with the legacy client.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newsmartscreenlibraryenabled"
PreventSmartScreenPromptOverride_Policy="Prevent bypassing Microsoft Defender SmartScreen prompts for sites"
PreventSmartScreenPromptOverride_Explain="This policy setting lets you decide whether users can override the Microsoft Defender SmartScreen warnings about potentially malicious websites.\n\nIf you enable this setting, users can't ignore Microsoft Defender SmartScreen warnings and they are blocked from continuing to the site.\n\nIf you disable or don't configure this setting, users can ignore Microsoft Defender SmartScreen warnings and continue to the site.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#preventsmartscreenpromptoverride"
PreventSmartScreenPromptOverrideForFiles_Policy="Prevent bypassing of Microsoft Defender SmartScreen warnings about downloads"
PreventSmartScreenPromptOverrideForFiles_Explain="This policy lets you determine whether users can override Microsoft Defender SmartScreen warnings about unverified downloads.\n\nIf you enable this policy, users in your organization can't ignore Microsoft Defender SmartScreen warnings, and they're prevented from completing the unverified downloads.\n\nIf you disable or don't configure this policy, users can ignore Microsoft Defender SmartScreen warnings and complete unverified downloads.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#preventsmartscreenpromptoverrideforfiles"
SmartScreenAllowListDomains_Policy="Configure the list of domains for which Microsoft Defender SmartScreen won't trigger warnings"
SmartScreenAllowListDomains_Explain="Configure the list of Microsoft Defender SmartScreen trusted domains. This means:\nMicrosoft Defender SmartScreen won't check for potentially malicious resources like phishing software and other malware if the source URLs match these domains.\nThe Microsoft Defender SmartScreen download protection service won't check downloads hosted on these domains.\n\nIf you enable this policy, Microsoft Defender SmartScreen trusts these domains.\nIf you disable or don't set this policy, default Microsoft Defender SmartScreen protection is applied to all resources.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\nAlso note that this policy does not apply if your organization has enabled Microsoft Defender Advanced Threat Protection. You must configure your allow and block lists in Microsoft Defender Security Center instead.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#smartscreenallowlistdomains"
SmartScreenAllowListDomains_Part="Configure the list of domains for which Microsoft Defender SmartScreen won't trigger warnings"
SmartScreenForTrustedDownloadsEnabled_Policy="Force Microsoft Defender SmartScreen checks on downloads from trusted sources"
SmartScreenForTrustedDownloadsEnabled_Explain="This policy setting lets you configure whether Microsoft Defender SmartScreen checks download reputation from a trusted source.\n\nIf you enable or don't configure this setting, Microsoft Defender SmartScreen checks the download's reputation regardless of source.\n\nIf you disable this setting, Microsoft Defender SmartScreen doesn't check the download's reputation when downloading from a trusted source.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#smartscreenfortrusteddownloadsenabled"
SmartScreenPuaEnabled_Policy="Configure Microsoft Defender SmartScreen to block potentially unwanted apps"
SmartScreenPuaEnabled_Explain="This policy setting lets you configure whether to turn on blocking for potentially unwanted apps with Microsoft Defender SmartScreen. Potentially unwanted app blocking with Microsoft Defender SmartScreen provides warning messages to help protect users from adware, coin miners, bundleware, and other low-reputation apps that are hosted by websites. Potentially unwanted app blocking with Microsoft Defender SmartScreen is turned off by default.\n\nIf you enable this setting, potentially unwanted app blocking with Microsoft Defender SmartScreen is turned on.\n\nIf you disable this setting, potentially unwanted app blocking with Microsoft Defender SmartScreen is turned off.\n\nIf you don't configure this setting, users can choose whether to use potentially unwanted app blocking with Microsoft Defender SmartScreen.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#smartscreenpuaenabled"
SmartScreenDnsRequestsEnabled_Policy="Enable Microsoft Defender SmartScreen DNS requests"
SmartScreenDnsRequestsEnabled_Explain="This policy lets you configure whether to enable DNS requests made by Microsoft Defender SmartScreen. Note: Disabling DNS requests will prevent Microsoft Defender SmartScreen from getting IP addresses, and potentially impact the IP-based protections provided.\n\nIf you enable or don't configure this setting, Microsoft Defender SmartScreen will make DNS requests.\n\nIf you disable this setting, Microsoft Defender SmartScreen will not make any DNS requests.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#smartscreendnsrequestsenabled"
DefaultSearchProvider_Category="Standard søkeleverandør"
DefaultSearchProviderEnabled_Policy="Aktiver standard søkeleverandør"
DefaultSearchProviderEnabled_Explain="Enables the ability to use a default search provider.\n\nIf you enable this policy, a user can search for a term by typing in the address bar (as long as what they type isn't a URL).\n\nYou can specify the default search provider to use by enabling the rest of the default search policies. If these are left empty (not configured) or configured incorrectly, the user can choose the default provider.\n\nIf you disable this policy, the user can't search from the address bar.\n\nIf you enable or disable this policy, users can't change or override it.\n\nIf you don't configure this policy, the default search provider is enabled, and the user can choose the default search provider and set the search provider list.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX..\n\nStarting in Microsoft Edge 84, you can set this policy as a recommended policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultsearchproviderenabled"
DefaultSearchProviderName_Policy="Navn for standard søkeleverandør"
DefaultSearchProviderName_Explain="Specifies the name of the default search provider.\n\nIf you enable this policy, you set the name of the default search provider.\n\nIf you don't enable this policy or if you leave it empty, the host name specified by the search URL is used.\n\n'DefaultSearchProviderName' should be set to an organization-approved encrypted search provider that corresponds to the encrypted search provider set in DTBC-0008. This policy is applied only if you enable the 'DefaultSearchProviderEnabled' (Aktiver standard søkeleverandør) and 'DefaultSearchProviderSearchURL' (Nettadresse for søk for standard søkeleverandør) policies.\n\nStarting in Microsoft Edge 84, you can set this policy as a recommended policy. If the user has already set a default search provider, the default search provider configured by this recommended policy will not be added to the list of search providers the user can choose from. If this is the desired behavior, use the 'ManagedSearchEngines' (Manage Search Engines) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultsearchprovidername"
DefaultSearchProviderName_Part="Navn for standard søkeleverandør"
DefaultSearchProviderKeyword_Policy="Søkeord for standard søkeleverandør"
DefaultSearchProviderKeyword_Explain="Specifies the keyword, which is the shortcut used in the Address Bar to trigger the search for this provider.\n\nThis policy is optional. If you don't configure it, no keyword activates the search provider.\n\nThis policy is applied only if you enable the 'DefaultSearchProviderEnabled' (Aktiver standard søkeleverandør) and 'DefaultSearchProviderSearchURL' (Nettadresse for søk for standard søkeleverandør) policies.\n\nStarting in Microsoft Edge 84, you can set this policy as a recommended policy. If the user has already set a default search provider, the default search provider configured by this recommended policy will not be added to the list of search providers the user can choose from. If this is the desired behavior, use the 'ManagedSearchEngines' (Manage Search Engines) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultsearchproviderkeyword"
DefaultSearchProviderKeyword_Part="Søkeord for standard søkeleverandør"
DefaultSearchProviderSearchURL_Policy="Nettadresse for søk for standard søkeleverandør"
DefaultSearchProviderSearchURL_Explain="Specifies the URL of the search engine used for a default search. The URL contains the string '{searchTerms}', which is replaced at query time by the terms the user is searching for.\n\nSpecify Bing's search URL as:\n\n'{bing:baseURL}search?q={searchTerms}'.\n\nSpecify Google's search URL as: '{google:baseURL}search?q={searchTerms}&{google:RLZ}{google:originalQueryForSuggestion}{google:assistedQueryStats}{google:searchFieldtrialParameter}{google:searchClient}{google:sourceId}ie={inputEncoding}'.\n\nThis policy is required when you enable the 'DefaultSearchProviderEnabled' (Aktiver standard søkeleverandør) policy; if you don't enable the latter policy, this policy is ignored.\n\nStarting in Microsoft Edge 84, you can set this policy as a recommended policy. If the user has already set a default search provider, the default search provider configured by this recommended policy will not be added to the list of search providers the user can choose from. If this is the desired behavior, use the 'ManagedSearchEngines' (Manage Search Engines) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultsearchprovidersearchurl"
DefaultSearchProviderSearchURL_Part="Nettadresse for søk for standard søkeleverandør"
DefaultSearchProviderSuggestURL_Policy="Default search provider URL for suggestions"
DefaultSearchProviderSuggestURL_Explain="Specifies the URL for the search engine used to provide search suggestions. The URL contains the string '{searchTerms}', which is replaced at query time by the text the user has entered so far.\n\nThis policy is optional. If you don't configure it, users won't see search suggestions; they will see suggestions from their browsing history and favorites.\n\nBing's suggest URL can be specified as:\n\n'{bing:baseURL}qbox?query={searchTerms}'.\n\nGoogle's suggest URL can be specified as: '{google:baseURL}complete/search?output=chrome&q={searchTerms}'.\n\nThis policy is applied only if you enable the 'DefaultSearchProviderEnabled' (Aktiver standard søkeleverandør) and 'DefaultSearchProviderSearchURL' (Nettadresse for søk for standard søkeleverandør) policies.\n\nStarting in Microsoft Edge 84, you can set this policy as a recommended policy. If the user has already set a default search provider, the default search provider configured by this recommended policy will not be added to the list of search providers the user can choose from. If this is the desired behavior, use the 'ManagedSearchEngines' (Manage Search Engines) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultsearchprovidersuggesturl"
DefaultSearchProviderSuggestURL_Part="Default search provider URL for suggestions"
DefaultSearchProviderEncodings_Policy="Kodinger av standard søkeleverandør"
DefaultSearchProviderEncodings_Explain="Specify the character encodings supported by the search provider. Encodings are code page names like UTF-8, GB2312, and ISO-8859-1. They are tried in the order provided.\n\nThis policy is optional. If not configured, the default, UTF-8, is used.\n\nThis policy is applied only if you enable the 'DefaultSearchProviderEnabled' (Aktiver standard søkeleverandør) and 'DefaultSearchProviderSearchURL' (Nettadresse for søk for standard søkeleverandør) policies.\n\nStarting in Microsoft Edge 84, you can set this policy as a recommended policy. If the user has already set a default search provider, the default search provider configured by this recommended policy will not be added to the list of search providers the user can choose from. If this is the desired behavior, use the 'ManagedSearchEngines' (Manage Search Engines) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultsearchproviderencodings"
DefaultSearchProviderEncodings_Part="Kodinger av standard søkeleverandør"
DefaultSearchProviderImageURL_Policy="Specifies the search-by-image feature for the default search provider"
DefaultSearchProviderImageURL_Explain="Specifies the URL to the search engine used for image search. Search requests are sent using the GET method.\n\nThis policy is optional. If you don't configure it, image search isn't available.\n\nSpecify Bing's Image Search URL as:\n'{bing:baseURL}images/detail/search?iss=sbiupload&FORM=ANCMS1#enterInsights'.\n\nSpecify Google's Image Search URL as: '{google:baseURL}searchbyimage/upload'.\n\nSee 'DefaultSearchProviderImageURLPostParams' (Parameters for an image URL that uses POST) policy to finish configuring image search.\n\nThis policy is applied only if you enable the 'DefaultSearchProviderEnabled' (Aktiver standard søkeleverandør) and 'DefaultSearchProviderSearchURL' (Nettadresse for søk for standard søkeleverandør) policies.\n\nStarting in Microsoft Edge 84, you can set this policy as a recommended policy. If the user has already set a default search provider, the default search provider configured by this recommended policy will not be added to the list of search providers the user can choose from. If this is the desired behavior, use the 'ManagedSearchEngines' (Manage Search Engines) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultsearchproviderimageurl"
DefaultSearchProviderImageURL_Part="Specifies the search-by-image feature for the default search provider"
DefaultSearchProviderImageURLPostParams_Policy="Parameters for an image URL that uses POST"
DefaultSearchProviderImageURLPostParams_Explain="If you enable this policy, it specifies the parameters used when an image search that uses POST is performed. The policy consists of comma-separated name/value pairs. If a value is a template parameter, like {imageThumbnail} in the preceding example, it's replaced with real image thumbnail data. This policy is applied only if you enable the 'DefaultSearchProviderEnabled' (Aktiver standard søkeleverandør) and 'DefaultSearchProviderSearchURL' (Nettadresse for søk for standard søkeleverandør) policies.\n\nSpecify Bing's Image Search URL Post Params as:\n'imageBin={google:imageThumbnailBase64}'.\n\nSpecify Google's Image Search URL Post Params as:\n'encoded_image={google:imageThumbnail},image_url={google:imageURL},sbisrc={google:imageSearchSource},original_width={google:imageOriginalWidth},original_height={google:imageOriginalHeight}'.\n\nIf you don't set this policy, image search requests are sent using the GET method.\n\nStarting in Microsoft Edge 84, you can set this policy as a recommended policy. If the user has already set a default search provider, the default search provider configured by this recommended policy will not be added to the list of search providers the user can choose from. If this is the desired behavior, use the 'ManagedSearchEngines' (Manage Search Engines) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultsearchproviderimageurlpostparams"
DefaultSearchProviderImageURLPostParams_Part="Parameters for an image URL that uses POST"
NewTabPageSearchBox_Policy="Configure the new tab page search box experience"
NewTabPageSearchBox_Explain="You can configure the new tab page search box to use "Search box (Recommended)" or "Address bar" to search on new tabs. This policy only works if you set the search engine to a value other than Bing by setting the following two policies: 'DefaultSearchProviderEnabled' (Aktiver standard søkeleverandør) and 'DefaultSearchProviderSearchURL' (Nettadresse for søk for standard søkeleverandør).\n\n If you disable or don't configure this policy and:\n\n- If the address bar default search engine is Bing, the new tab page uses the search box to search on new tabs.\n- If the address bar default search engine is not Bing, users are offered an additional choice (use "Address bar") when searching on new tabs.\n\n\nIf you enable this policy and set it to:\n\n- "Search box (Recommended)" ('bing'), the new tab page uses the search box to search on new tabs.\n- "Address bar" ('redirect'), the new tab page search box uses the address bar to search on new tabs.\n\nPolicy options mapping:\n\n* bing (bing) = Search box (Recommended)\n\n* redirect (redirect) = Address bar\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newtabpagesearchbox"
NewTabPageSearchBox_Part="New tab page search box experience"
NewTabPageSearchBox_bing_DropDown="Search box (Recommended)"
NewTabPageSearchBox_redirect_DropDown="Address bar"
Startup_Category="Startup, home page and new tab page"
ShowHomeButton_Policy="Vis startsideknappen på verktøylinjen"
ShowHomeButton_Explain="Shows the Home button on Microsoft Edge's toolbar.\n\nEnable this policy to always show the Home button. Disable it to never show the button.\n\nIf you don't configure the policy, users can choose whether to show the home button.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#showhomebutton"
HomepageLocation_Policy="Konfigurer nettadresse for startsiden"
HomepageLocation_Explain="Configures the default home page URL in Microsoft Edge.\n\nThe home page is the page opened by the Home button. The pages that open on startup are controlled by the 'RestoreOnStartup' (Action to take on startup) policies.\n\nYou can either set a URL here or set the home page to open the new tab page 'edge://newtab'. By default, the Home button will open the new tab page (as configured by the user or with the policy 'NewTabPageLocation' (Configure the new tab page URL)), and the user will be able to choose between the URL configured by this policy and the new tab page.\n\nIf you enable this policy, users can't change their home page URL, but they can choose the behavior for the Home button to open either the set URL or the new tab page. If you wish to enforce the usage of the set URL you must also configure 'HomepageIsNewTabPage' (Set the new tab page as the home page)=Disabled.\n\nIf you disable or don't configure this policy, users can choose their own home page, as long as the 'HomepageIsNewTabPage' policy isn't enabled.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro, or Enterprise instances enrolled for device management.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#homepagelocation"
HomepageLocation_Part="Nettadresse for startside"
HomepageIsNewTabPage_Policy="Set the new tab page as the home page"
HomepageIsNewTabPage_Explain="Configures the default home page in Microsoft Edge. You can set the home page to a URL you specify or to the new tab page.\n\nIf you enable this policy, the Home button is set to the new tab page as configured by the user or with the policy 'NewTabPageLocation' (Configure the new tab page URL) and the URL set with the policy 'HomepageLocation' (Konfigurer nettadresse for startsiden) is not taken into consideration.\n\nIf you disable this policy, the Home button is the set URL as configured by the user or as configured in the policy 'HomepageLocation'.\n\nIf you don't configure this policy, users can choose whether the set URL or the new tab page is their home page.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain or Windows 10 Pro or Enterprise instances enrolled for device management.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#homepageisnewtabpage"
NewTabPageAllowedBackgroundTypes_Policy="Configure the background types allowed for the new tab page layout"
NewTabPageAllowedBackgroundTypes_Explain="You can configure which types of background image that are allowed on the new tab page layout in Microsoft Edge.\n\nIf you don't configure this policy, all background image types on the new tab page are enabled.\n\nPolicy options mapping:\n\n* DisableImageOfTheDay (1) = Disable daily background image type\n\n* DisableCustomImage (2) = Disable custom background image type\n\n* DisableAll (3) = Disable all background image types\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newtabpageallowedbackgroundtypes"
NewTabPageAllowedBackgroundTypes_Part="New tab page experience"
NewTabPageAllowedBackgroundTypes_DisableImageOfTheDay_DropDown="Disable daily background image type"
NewTabPageAllowedBackgroundTypes_DisableCustomImage_DropDown="Disable custom background image type"
NewTabPageAllowedBackgroundTypes_DisableAll_DropDown="Disable all background image types"
NewTabPageLocation_Policy="Configure the new tab page URL"
NewTabPageLocation_Explain="Configures the default URL for the new tab page.\n\nThe recommended version of this policy does not currently work and functions exactly like the mandatory version.\n\nThis policy determines the page that's opened when new tabs are created (including when new windows are opened). It also affects the startup page if that's set to open to the new tab page.\n\nThis policy doesn't determine which page opens on startup; that's controlled by the 'RestoreOnStartup' (Action to take on startup) policy. It also doesn't affect the home page if that's set to open to the new tab page.\n\nIf you don't configure this policy, the default new tab page is used.\n\nIf you configure this policy *and* the 'NewTabPageSetFeedType' (Configure the Microsoft Edge new tab page experience) policy, this policy has precedence.\n\nIf a blank tab is preferred, "about:blank" is the correct URL to use, not "about://blank".\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newtabpagelocation"
NewTabPageLocation_Part="New tab page URL"
NewTabPageSetFeedType_Policy="Configure the Microsoft Edge new tab page experience (obsolete)"
NewTabPageSetFeedType_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 92.\n\nThis policy is obsolete because the new version of the enterprise new tab page no longer requires choosing between different content types. Instead, the content that is presented to the user can be controlled via the Microsoft 365 admin center. To get to the Microsoft 365 admin center, sign in at https://admin.microsoft.com with your admin account.\n\nLets you choose either the Microsoft News or Office 365 feed experience for the new tab page.\n\nWhen you set this policy to 'News', users will see the Microsoft News feed experience on the new tab page.\n\nWhen you set this policy to 'Office', users with an Azure Active Directory browser sign-in will see the Office 365 feed experience on the new tab page.\n\nIf you disable or don't configure this policy:\n\n- Users with an Azure Active Directory browser sign-in are offered the Office 365 new tab page feed experience, as well as the standard new tab page feed experience.\n\n- Users without an Azure Active Directory browser sign-in will see the standard new tab page experience.\n\nIf you configure this policy *and* the 'NewTabPageLocation' (Configure the new tab page URL) policy, 'NewTabPageLocation' has precedence.\n\nDefault setting:  Disabled or not configured.\n\nPolicy options mapping:\n\n* News (0) = Microsoft News feed experience\n\n* Office (1) = Office 365 feed experience\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newtabpagesetfeedtype"
NewTabPageSetFeedType_Part="New tab page experience"
NewTabPageSetFeedType_News_DropDown="Microsoft News feed experience"
NewTabPageSetFeedType_Office_DropDown="Office 365 feed experience"
RestoreOnStartup_Policy="Action to take on startup"
RestoreOnStartup_Explain="Specify how Microsoft Edge behaves when it starts.\n\nIf you want a new tab to always open on startup, choose 'RestoreOnStartupIsNewTabPage'.\n\nIf you want to reopen URLs that were open the last time Microsoft Edge closed, choose 'RestoreOnStartupIsLastSession'. The browsing session will be restored as it was. Note that this option disables some settings that rely on sessions or that perform actions on exit (such as Clear browsing data on exit or session-only cookies).\n\nIf you want to open a specific set of URLs, choose 'RestoreOnStartupIsURLs'.\n\nDisabling this setting is equivalent to leaving it not configured. Users will be able to change it in Microsoft Edge.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nPolicy options mapping:\n\n* RestoreOnStartupIsNewTabPage (5) = Open a new tab\n\n* RestoreOnStartupIsLastSession (1) = Gjenopprett den siste økten\n\n* RestoreOnStartupIsURLs (4) = Åpne en liste over nettadresser\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#restoreonstartup"
RestoreOnStartup_Part="Action to take on startup"
RestoreOnStartup_RestoreOnStartupIsNewTabPage_DropDown="Open a new tab"
RestoreOnStartup_RestoreOnStartupIsLastSession_DropDown="Gjenopprett den siste økten"
RestoreOnStartup_RestoreOnStartupIsURLs_DropDown="Åpne en liste over nettadresser"
RestoreOnStartupURLs_Policy="Sites to open when the browser starts"
RestoreOnStartupURLs_Explain="Specify a list of websites to open automatically when the browser starts. If you don't configure this policy, no site is opened on startup.\n\nThis policy only works if you also set the 'RestoreOnStartup' (Action to take on startup) policy to 'Open a list of URLs' (4).\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#restoreonstartupurls"
RestoreOnStartupURLs_Part="Sites to open when the browser starts"
NewTabPageCompanyLogo_Policy="Set new tab page company logo (obsolete)"
NewTabPageCompanyLogo_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 85.\n\nThis policy didn't work as expected due to changes in operational requirements. Therefore it's obsolete and should not be used.\n\nSpecifies the company logo to use on the new tab page in Microsoft Edge.\n\nThe policy should be configured as a string that expresses the logo(s) in JSON format. For example: { "default_logo": { "url": "https://www.contoso.com/logo.png", "hash": "cd0aa9856147b6c5b4ff2b7dfee5da20aa38253099ef1b4a64aced233c9afe29" }, "light_logo": { "url": "https://www.contoso.com/light_logo.png", "hash": "517d286edb416bb2625ccfcba9de78296e90da8e32330d4c9c8275c4c1c33737" } }\n\nYou configure this policy by specifying the URL from which Microsoft Edge can download the logo and its cryptographic hash (SHA-256), which is used to verify the integrity of the download. The logo must be in PNG or SVG format, and its file size must not exceed 16 MB. The logo is downloaded and cached, and it will be redownloaded whenever the URL or the hash changes. The URL must be accessible without any authentication.\n\nThe 'default_logo' is required and will be used when there's no background image. If 'light_logo' is provided, it will be used when the user's new tab page has a background image. We recommend a horizontal logo with a transparent background that is left-aligned and vertically centered. The logo should have a minimum height of 32 pixels and an aspect ratio from 1:1 to 4:1. The 'default_logo' should have proper contrast against a white/black background while the 'light_logo' should have proper contrast against a background image.\n\nIf you enable this policy, Microsoft Edge downloads and shows the specified logo(s) on the new tab page. Users can't override or hide the logo(s).\n\nIf you disable or don't configure this policy, Microsoft Edge will show no company logo or a Microsoft logo on the new tab page.\n\nFor help with determining the SHA-256 hash, see [Get-FileHash](/powershell/module/microsoft.powershell.utility/get-filehash).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newtabpagecompanylogo"
NewTabPageCompanyLogo_Part="New tab page company logo"
NewTabPageContentEnabled_Policy="Allow Microsoft News content on the new tab page"
NewTabPageContentEnabled_Explain="If you enable or don't configure this policy, Microsoft Edge displays Microsoft News content on the new tab page. The user can choose different display options for the content, including but not limited to Content off, Content visible on scroll, Headings only, and Content visible. Enabling this policy doesn't force content to be visible - the user can continue to set their own preferred content position.\n\nIf you disable this policy, Microsoft Edge does not display Microsoft News content on the new tab page, the Content control in the NTP settings flyout is disabled and set to 'Content off'.\n\nThis policy only applies for Microsoft Edge local user profiles, profiles signed in using a Microsoft Account, and profiles signed in using Active Directory. To configure the Enterprise new tab page for profiles signed in using Azure Active Directory, use the M365 admin portal.\n\nRelated policies: 'NewTabPageAllowedBackgroundTypes' (Configure the background types allowed for the new tab page layout), 'NewTabPageQuickLinksEnabled' (Allow quick links on the new tab page)\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newtabpagecontentenabled"
NewTabPageHideDefaultTopSites_Policy="Hide the default top sites from the new tab page"
NewTabPageHideDefaultTopSites_Explain="Hides the default top sites from the new tab page in Microsoft Edge.\n\nIf you set this policy to true, the default top site tiles are hidden.\n\nIf you set this policy to false or don't configure it, the default top site tiles remain visible.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newtabpagehidedefaulttopsites"
NewTabPageManagedQuickLinks_Policy="Set new tab page quick links"
NewTabPageManagedQuickLinks_Explain="By default, Microsoft Edge displays quick links on the new tab page from user-added shortcuts and top sites based on browsing history. With this policy, you can configure up to three quick link tiles on the new tab page, expressed as a JSON object:\n\n[ { "url": "https://www.contoso.com", "title": "Contoso Portal", "pinned": true/false }, ... ]\n\nThe 'url' field is required; 'title' and 'pinned' are optional. If 'title' is not provided, the URL is used as the default title. If 'pinned' is not provided, the default value is false.\n\nMicrosoft Edge presents these in the order listed, from left to right, with all pinned tiles displayed ahead of non-pinned tiles.\n\nIf the policy is set as mandatory, the 'pinned' field will be ignored and all tiles will be pinned. The tiles can't be deleted by the user and will always appear at the front of the quick links list.\n\nIf the policy is set as recommended, pinned tiles will remain in the list but the user has the ability to edit and delete them. Quick link tiles that aren't pinned behave like default top sites and are pushed off the list if other websites are visited more frequently. When applying non-pinned links via this policy to an existing browser profile, the links may not appear at all, depending on how they rank compared to the user's browsing history.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newtabpagemanagedquicklinks"
NewTabPageManagedQuickLinks_Part="Set new tab page quick links"
NewTabPagePrerenderEnabled_Policy="Enable preload of the new tab page for faster rendering"
NewTabPagePrerenderEnabled_Explain="If you configure this policy, preloading the New tab page is enabled, and users can't change this setting. If you don't configure this policy, preloading is enabled and a user can change this setting.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newtabpageprerenderenabled"
NewTabPageQuickLinksEnabled_Policy="Allow quick links on the new tab page"
NewTabPageQuickLinksEnabled_Explain="If you enable or don't configure this policy, Microsoft Edge displays quick links on the new tab page, and the user can interact with the control, turning quick links on and off. Enabling this policy does not force quick links to be visible - the user can continue to turn quick links on and off.\n\nIf you disable this policy, Microsoft Edge hides quick links on the new tab page and disables the quick links control in the NTP settings flyout.\n\nThis policy only applies for Microsoft Edge local user profiles, profiles signed in using a Microsoft Account, and profiles signed in using Active Directory. To configure the Enterprise new tab page for profiles signed in using Azure Active Directory, use the M365 admin portal.\n\nRelated policies: 'NewTabPageAllowedBackgroundTypes' (Configure the background types allowed for the new tab page layout), 'NewTabPageContentEnabled' (Allow Microsoft News content on the new tab page)\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#newtabpagequicklinksenabled"
TyposquattingChecker_Category="TyposquattingChecker settings"
TyposquattingCheckerEnabled_Policy="Configure Edge TyposquattingChecker"
TyposquattingCheckerEnabled_Explain="This policy setting lets you configure whether to turn on Edge TyposquattingChecker. Edge TyposquattingChecker provides warning messages to help protect your users from potential typosquatting sites. By default, Edge TyposquattingChecker is turned on.\n\nIf you enable this policy, Edge TyposquattingChecker is turned on.\n\nIf you disable this policy, Edge TyposquattingChecker is turned off.\n\nIf you don't configure this policy, Edge TyposquattingChecker is turned on but users can choose whether to use Edge TyposquattingChecker.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#typosquattingcheckerenabled"
Printing_Category="Utskrift"
PrintingEnabled_Policy="Aktiver utskrift"
PrintingEnabled_Explain="Enables printing in Microsoft Edge and prevents users from changing this setting.\n\nIf you enable this policy or don't configure it, users can print.\n\nIf you disable this policy, users can't print from Microsoft Edge. Printing is disabled in the wrench menu, extensions, JavaScript applications, and so on. Users can still print from plug-ins that bypass Microsoft Edge while printing. For example, certain Adobe Flash applications have the print option in their context menu, which isn't covered by this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printingenabled"
PrintingAllowedBackgroundGraphicsModes_Policy="Restrict background graphics printing mode"
PrintingAllowedBackgroundGraphicsModes_Explain="Restricts background graphics printing mode. If this policy isn't set there's no restriction on printing background graphics.\n\nPolicy options mapping:\n\n* any (any) = Allow printing with and without background graphics\n\n* enabled (enabled) = Allow printing only with background graphics\n\n* disabled (disabled) = Allow printing only without background graphics\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printingallowedbackgroundgraphicsmodes"
PrintingAllowedBackgroundGraphicsModes_Part="Restrict background graphics printing mode"
PrintingAllowedBackgroundGraphicsModes_any_DropDown="Allow printing with and without background graphics"
PrintingAllowedBackgroundGraphicsModes_enabled_DropDown="Allow printing only with background graphics"
PrintingAllowedBackgroundGraphicsModes_disabled_DropDown="Allow printing only without background graphics"
PrintingBackgroundGraphicsDefault_Policy="Default background graphics printing mode"
PrintingBackgroundGraphicsDefault_Explain="Overrides the last used setting for printing background graphics.\nIf you enable this setting, background graphics printing is enabled.\nIf you disable this setting, background graphics printing is disabled.\n\nPolicy options mapping:\n\n* enabled (enabled) = Enable background graphics printing mode by default\n\n* disabled (disabled) = Disable background graphics printing mode by default\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printingbackgroundgraphicsdefault"
PrintingBackgroundGraphicsDefault_Part="Default background graphics printing mode"
PrintingBackgroundGraphicsDefault_enabled_DropDown="Enable background graphics printing mode by default"
PrintingBackgroundGraphicsDefault_disabled_DropDown="Disable background graphics printing mode by default"
PrintingPaperSizeDefault_Policy="Standard sidestørrelse for utskrift"
PrintingPaperSizeDefault_Explain="Overrides default printing page size.\n\nname should contain one of the listed formats or 'custom' if required paper size is not in the list. If 'custom' value is provided custom_size property should be specified. It describes the desired height and width in micrometers. Otherwise custom_size property shouldn't be specified. Policy that violates these rules is ignored.\n\nIf the page size is unavailable on the printer chosen by the user this policy is ignored.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printingpapersizedefault"
PrintingPaperSizeDefault_Part="Standard sidestørrelse for utskrift"
UseSystemPrintDialog_Policy="Print using system print dialog"
UseSystemPrintDialog_Explain="Shows the system print dialog instead of print preview.\n\nIf you enable this policy, Microsoft Edge opens the system print dialog instead of the built-in print preview when a user prints a page.\n\nIf you don't configure or disable this policy, print commands trigger the Microsoft Edge print preview screen.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#usesystemprintdialog"
PrintHeaderFooter_Policy="Print headers and footers"
PrintHeaderFooter_Explain="Force 'headers and footers' to be on or off in the printing dialog.\n\nIf you don't configure this policy, users can decide whether to print headers and footers.\n\nIf you disable this policy, users can't print headers and footers.\n\nIf you enable this policy, users always print headers and footers.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printheaderfooter"
DefaultPrinterSelection_Policy="Regler for valg av standardskriver"
DefaultPrinterSelection_Explain="Overrides Microsoft Edge default printer selection rules. This policy determines the rules for selecting the default printer in Microsoft Edge, which happens the first time a user tries to print a page.\n\nWhen this policy is set, Microsoft Edge tries to find a printer that matches all of the specified attributes and uses it as default printer. If there are multiple printers that meet the criteria, the first printer that matches is used.\n\nIf you don't configure this policy or no matching printers are found within the timeout, the printer defaults to the built-in PDF printer or no printer, if the PDF printer isn't available.\n\nThe value is parsed as a JSON object, conforming to the following schema: { "type": "object", "properties": { "idPattern": { "description": "Regular expression to match printer id.", "type": "string" }, "namePattern": { "description": "Regular expression to match printer display name.", "type": "string" } } }\n\nOmitting a field means all values match; for example, if you don't specify connectivity Print Preview starts discovering all kinds of local printers. Regular expression patterns must follow the JavaScript RegExp syntax and matches are case sensitive.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultprinterselection"
DefaultPrinterSelection_Part="Regler for valg av standardskriver"
PrintPreviewUseSystemDefaultPrinter_Policy="Set the system default printer as the default printer"
PrintPreviewUseSystemDefaultPrinter_Explain="Tells Microsoft Edge to use the system default printer as the default choice in Print Preview instead of the most recently used printer.\n\nIf you disable this policy or don't configure it, Print Preview uses the most recently used printer as the default destination choice.\n\nIf you enable this policy, Print Preview uses the OS system default printer as the default destination choice.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printpreviewusesystemdefaultprinter"
PrinterTypeDenyList_Policy="Disable printer types on the deny list"
PrinterTypeDenyList_Explain="The printer types on the deny list won't be discovered or have their capabilities fetched.\n\nPlacing all printer types on the deny list effectively disables printing, because there's no print destination for documents.\n\nIf you don't configure this policy, or the printer list is empty, all printer types are discoverable.\n\nPrinter destinations include extension printers and local printers. Extension printers are also known as print provider destinations, and include any destination that belongs to a Microsoft Edge extension.\nLocal printers are also known as native printing destinations, and include destinations available to the local machine and shared network printers.\n\nIn Microsoft version 93 or later, if you set this policy to 'pdf' it also disables the 'save as Pdf' option from the right click context menu.\n\nPolicy options mapping:\n\n* privet (privet) = Zeroconf-based (mDNS + DNS-SD) protocol destinations\n\n* extension (extension) = Extension-based destinations\n\n* pdf (pdf) = The 'Save as PDF' destination. (93 or later, also disables from context menu)\n\n* local (local) = Local printer destinations\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printertypedenylist"
PrinterTypeDenyList_Part="Disable printer types on the deny list"
PrintRasterizationMode_Policy="Print Rasterization Mode"
PrintRasterizationMode_Explain="Controls how Microsoft Edge prints on Windows.\n\nWhen printing to a non-PostScript printer on Windows, sometimes print jobs need to be rasterized to print correctly.\n\nIf you set this policy to 'Full' or don't configure it, Microsoft Edge will do full page rasterization if necessary.\n\nIf you set this policy to 'Fast', Microsoft Edge will reduce the amount of rasterization which can help reduce print job sizes and increase printing speed.\n\nPolicy options mapping:\n\n* Full (0) = Full page rasterization\n\n* Fast (1) = Avoid rasterization if possible\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printrasterizationmode"
PrintRasterizationMode_Part="Print Rasterization Mode"
PrintRasterizationMode_Full_DropDown="Full page rasterization"
PrintRasterizationMode_Fast_DropDown="Avoid rasterization if possible"
PrintRasterizePdfDpi_Policy="Print Rasterize PDF DPI"
PrintRasterizePdfDpi_Explain="Controls print image resolution when Microsoft Edge prints PDFs with rasterization.\n\nWhen printing a PDF using the Print to image option, it can be beneficial to specify a print resolution other than a device's printer setting or the PDF default.  A high resolution will significantly increase the processing and printing time while a low resolution can lead to poor imaging quality.\n\nIf you set this policy, it allows a particular resolution to be specified for use when rasterizing PDFs for printing.\n\nIf you set this policy to zero or don't configure it, the system default resolution will be used during rasterization of page images.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printrasterizepdfdpi"
PrintRasterizePdfDpi_Part="Print Rasterize PDF DPI"
PrintingWebpageLayout_Policy="Sets layout for printing"
PrintingWebpageLayout_Explain="Configuring  this   policy  sets  the  layout  for  printing  webpages.\n\nIf  you  disable  or  don't  configure  this  policy,  users  can  decide  whether  to  print  webpages  in  Portrait  or  Landscape  layout.\n\nIf  you  enable  this  policy,  the  selected  option  is  set  as  the  layout  option.\n\nPolicy options mapping:\n\n* portrait (0) = Sets layout option as portrait\n\n* landscape (1) = Sets layout option as landscape\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printingwebpagelayout"
PrintingWebpageLayout_Part="Sets layout for printing"
PrintingWebpageLayout_portrait_DropDown="Sets layout option as portrait"
PrintingWebpageLayout_landscape_DropDown="Sets layout option as landscape"
PrintPostScriptMode_Policy="Print PostScript Mode"
PrintPostScriptMode_Explain="Controls how Microsoft Edge prints on Microsoft Windows.\n\nPrinting to a PostScript printer on Microsoft Windows different PostScript generation methods can affect printing performance.\n\nIf you set this policy to Default, Microsoft Edge will use a set of default options when generating PostScript. For text in particular, text will always be rendered using Type 3 fonts.\n\nIf you set this policy to Type42, Microsoft Edge will render text using Type 42 fonts if possible. This should increase printing speed for some PostScript printers.\n\nIf you don't configure this policy, Microsoft Edge will be in Default mode.\n\nPolicy options mapping:\n\n* Default (0) = Standard\n\n* Type42 (1) = Type42\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printpostscriptmode"
PrintPostScriptMode_Part="Print PostScript Mode"
PrintPostScriptMode_Default_DropDown="Standard"
PrintPostScriptMode_Type42_DropDown="Type42"
PrintStickySettings_Policy="Print preview sticky settings"
PrintStickySettings_Explain="Specifies whether print preview should apply last used settings for Microsoft Edge PDF and webpages.\n\nIf you set this policy to 'EnableAll' or don't configure it, Microsoft Edge applies the last used print preview settings for both PDF and webpages.\n\nIf you set this policy to 'DisableAll', Microsoft Edge doesn't apply the last used print preview settings for both PDF and webpages.\n\nIf you set this policy to 'DisablePdf', Microsoft Edge doesn't apply the last used print preview settings for PDF printing and retains it for webpages.\n\nIf you set this policy to 'DisableWebpage', Microsoft Edge doesn't apply the last used print preview settings for webpage printing and retain it for PDF.\n\nThis policy is only available if you enable or don't configure the 'PrintingEnabled' (Aktiver utskrift) policy.\n\nPolicy options mapping:\n\n* EnableAll (0) = Enable sticky settings for PDF and Webpages\n\n* DisableAll (1) = Disable sticky settings for PDF and Webpages\n\n* DisablePdf (2) = Disable sticky settings for PDF\n\n* DisableWebpage (3) = Disable sticky settings for Webpages\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#printstickysettings"
PrintStickySettings_Part="Print preview sticky settings"
PrintStickySettings_EnableAll_DropDown="Enable sticky settings for PDF and Webpages"
PrintStickySettings_DisableAll_DropDown="Disable sticky settings for PDF and Webpages"
PrintStickySettings_DisablePdf_DropDown="Disable sticky settings for PDF"
PrintStickySettings_DisableWebpage_DropDown="Disable sticky settings for Webpages"
Extensions_Category="Utvidelser"
ExtensionInstallBlocklist_Policy="Control which extensions cannot be installed"
ExtensionInstallBlocklist_Explain="Lets you specify which extensions the users CANNOT install. Extensions already installed will be disabled if blocked, without a way for the user to enable them. After a disabled extension is removed from the blocklist it will automatically get re-enabled.\n\nA blocklist value of '*' means all extensions are blocked unless they are explicitly listed in the allowlist.\n\nIf this policy isn't set, the user can install any extension in Microsoft Edge.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#extensioninstallblocklist"
ExtensionInstallBlocklist_Part="Utvidelses-ID-er brukeren skal hindres i å installere (eller * for alle)"
ExtensionInstallAllowlist_Policy="Allow specific extensions to be installed"
ExtensionInstallAllowlist_Explain="Setting this policy specifies which extensions are not subject to the blocklist.\n\nA blocklist value of * means all extensions are blocked and users can only install extensions listed in the allow list.\n\nBy default, all extensions are allowed. However, if you prohibited extensions by policy, you can use the list of allowed extensions to change that policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#extensioninstallallowlist"
ExtensionInstallAllowlist_Part="Extension IDs to exempt from the block list"
ExtensionInstallForcelist_Policy="Control which extensions are installed silently"
ExtensionInstallForcelist_Explain="Set this policy to specify a list of apps and extensions that install silently, without user interaction. Users can't uninstall or turn off this setting. Permissions are granted implicitly, including the enterprise.deviceAttributes and enterprise.platformKeys extension APIs. Note: These 2 APIs aren't available to apps and extensions that aren't force-installed.\n\nIf you don't set this policy, no apps or extensions are autoinstalled and users can uninstall any app in Microsoft Edge.\n\nThis policy supercedes 'ExtensionInstallBlocklist' (Control which extensions cannot be installed) policy. If a previously force-installed app or extension is removed from this list, Microsoft Edge automatically uninstalls it.\n\nFor Windows instances not joined to a Microsoft Active Directory domain, forced installation is limited to apps and extensions listed in the Microsoft Edge Add-ons website.\n\nOn macOS instances, apps and extensions from outside the Microsoft Edge Add-ons website can only be force installed if the instance is managed via MDM, or joined to a domain via MCX.\n\nThe source code of any extension can be altered by users with developer tools, potentially rendering the extension unfunctional. If this is a concern, configure the DeveloperToolsDisabled policy.\n\nEach list item of the policy is a string that contains an extension ID and, optionally, an "update" URL separated by a semicolon (;). The extension ID is the 32-letter string found, for example, on edge://extensions when in Developer mode. If specified, the "update" URL should point to an Update Manifest XML document ( https://go.microsoft.com/fwlink/?linkid=2095043 ). By default, the Microsoft Edge Add-ons website's update URL is used. The "update" URL set in this policy is only used for the initial installation; subsequent updates of the extension use the update URL in the extension's manifest.\n\nNote: This policy doesn't apply to InPrivate mode. Read about hosting extensions at [Publish and update extensions in the Microsoft Edge Add-ons website](/microsoft-edge/extensions-chromium/enterprise/hosting-and-updating).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#extensioninstallforcelist"
ExtensionInstallForcelist_Part="ID-er for utvidelser/apper og oppdateringsnettadresser som skal installeres stille"
ExtensionInstallSources_Policy="Configure extension and user script install sources"
ExtensionInstallSources_Explain="Define URLs that can install extensions and themes.\n\nDefine URLs that can install extensions and themes directly without having to drag and drop the packages to the edge://extensions page.\n\nEach item in this list is an extension-style match pattern (see https://go.microsoft.com/fwlink/?linkid=2095039). Users can easily install items from any URL that matches an item in this list. Both the location of the *.crx file and the page where the download is started from (in other words, the referrer) must be allowed by these patterns. Do not host the files at a location that requires authentication.\n\nThe 'ExtensionInstallBlocklist' (Control which extensions cannot be installed) policy takes precedence over this policy. Any extensions that's on the block list won't be installed, even if it comes from a site on this list.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#extensioninstallsources"
ExtensionInstallSources_Part="Nettadressemønstre du vil tillate installasjoner av utvidelser, programmer og brukerskript fra"
ExtensionAllowedTypes_Policy="Configure allowed extension types"
ExtensionAllowedTypes_Explain="Setting the policy controls which apps and extensions may be installed in Microsoft Edge, which hosts they can interact with, and limits runtime access.\n\nIf you don't set this policy, there aren't any restrictions on acceptable extension and app types.\n\nExtensions and apps which have a type that's not on the list won't be installed. Each value should be one of these strings:\n\n* "extension"\n\n* "theme"\n\n* "user_script"\n\n* "hosted_app"\n\nSee the Microsoft Edge extensions documentation for more information about these types.\n\nNote: This policy also affects extensions and apps to be force-installed using 'ExtensionInstallForcelist' (Control which extensions are installed silently).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#extensionallowedtypes"
ExtensionAllowedTypes_Part="Utvidelser og apper som kan installeres"
ExtensionSettings_Policy="Configure extension management settings"
ExtensionSettings_Explain="Setting this policy controls extension management settings for Microsoft Edge, including any controlled by existing extension-related policies. This policy supersedes any legacy policies that might be set.\n\nThis policy maps an extension ID or an update URL to its specific setting only. A default configuration can be set for the special ID "*", which applies to all extensions without a custom configuration in this policy. With an update URL, configuration applies to extensions with the exact update URL stated in the extension manifest. If the 'override_update_url' flag is set to true, the extension is installed and updated using the update URL specified in the 'ExtensionInstallForcelist' (Control which extensions are installed silently) policy or in 'update_url' field in this policy. The flag 'override_update_url' is ignored if the 'update_url' is the Edge Add-ons website update URL. For more details, check out the detailed guide to ExtensionSettings policy available at https://go.microsoft.com/fwlink/?linkid=2161555.\n\nTo block extensions from a particular third party store, you only need to block the update_url for that store. For example, if you want to block extensions from Chrome Web Store, you can use the following JSON.\n\n{"update_url:https://clients2.google.com/service/update2/crx":{"installation_mode":"blocked"}}\n\nNote that you can still use 'ExtensionInstallForcelist' and 'ExtensionInstallAllowlist' (Allow specific extensions to be installed) to allow / force install specific extensions even if the store is blocked using the JSON in the previous example.\n\nNote: For Windows instances not joined to a Microsoft Active Directory domain and macOS instances not managed via MDM or joined to a domain via MCX, forced installation is limited to apps and extensions listed in the Microsoft Edge Add-ons website.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#extensionsettings"
ExtensionSettings_Part="Configure extension management settings"
BlockExternalExtensions_Policy="Blocks external extensions from being installed"
BlockExternalExtensions_Explain="Control the installation of external extensions.\n\nIf you enable this setting, external extensions are blocked from being installed.\n\nIf you disable this setting or leave it unset, external extensions are allowed to be installed.\n\nExternal extensions and their installation are documented at [Alternate extension distribution methods](/microsoft-edge/extensions-chromium/developer-guide/alternate-distribution-options).\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#blockexternalextensions"
ControlDefaultStateOfAllowExtensionFromOtherStoresSettingEnabled_Policy="Configure default state of Allow extensions from other stores setting"
ControlDefaultStateOfAllowExtensionFromOtherStoresSettingEnabled_Explain="This policy allows you to control the default state of the Allow extensions from other stores setting.\nThis policy can't be used to stop installation of extensions from other stores such as Chrome Web Store.\nTo stop installation of extensions from other stores, use the Extension Settings policy: https://go.microsoft.com/fwlink/?linkid=2187098.\n\nWhen enabled, Allow extensions from other stores will be turned on. So, users won't have to turn on the flag manually\nwhile installing extensions from other supported stores such as Chrome Web Store. However a user can override this setting.\nIf the user has already turned on the setting and then turned it off, this setting may not work.\nIf the Admin first sets the policy as Enabled, but then changes it to not configured or disabled, it will have no impact on\nuser settings and the setting will remain as it is.\n\nWhen disabled or not configured, the user can manage the Allow extensions from other store setting.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#controldefaultstateofallowextensionfromotherstoressettingenabled"
AADWebSiteSSOUsingThisProfileEnabled_Policy="Single sign-on for work or school sites using this profile enabled"
AADWebSiteSSOUsingThisProfileEnabled_Explain="'Allow single sign-on for work or school sites using this profile' option allows non-AAD profiles to be able to use single sign-on for work or school sites using work or school credentials present on the machine. This option shows up for end-users as a toggle in Settings -> Profiles -> Profile Preferences for non-AAD profiles only.\n\nIf you enable or disable this policy, 'Intelligent enablement of Single sign-on (SSO) for all Windows Azure Active Directory (Azure AD) accounts for users with a single non-Azure AD Microsoft Edge profile' will be turned off.\n\nIf you don't configure this policy, users can control whether to use SSO using other credentials present on the machine in edge://settings/profiles/multiProfileSettings.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#aadwebsitessousingthisprofileenabled"
AccessibilityImageLabelsEnabled_Policy="Let screen reader users get image descriptions from Microsoft"
AccessibilityImageLabelsEnabled_Explain="Lets screen reader users get descriptions of unlabeled images on the web.\n\nIf you enable or don't configure this policy, users have the option of using an anonymous Microsoft service. This service provides automatic descriptions for unlabeled images users encounter on the web when they're using a screen reader.\n\nIf you disable this policy, users can't enable the Get Image Descriptions from Microsoft feature.\n\nWhen this feature is enabled, the content of images that need a generated description is sent to Microsoft servers to generate a description.\n\nNo cookies or other user data is sent to Microsoft, and Microsoft doesn't save or log any image content.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#accessibilityimagelabelsenabled"
AddressBarEditingEnabled_Policy="Configure address bar editing"
AddressBarEditingEnabled_Explain="If you enable or don't configure this policy, users can change the URL in the address bar.\n\nIf you disable this policy, it prevents users from changing the URL in the address bar.\n\nNote: This policy doesn't prevent the browser from navigating to any URL. Users can still navigate to any URL by using the search option in the default New Tab Page, or using any link that leads to a web search engine. To ensure that users can only go to sites you expect, consider configuring the following policies in addition to this policy:\n\n- 'NewTabPageLocation' (Configure the new tab page URL)\n\n- 'HomepageLocation' (Konfigurer nettadresse for startsiden)\n\n- 'HomepageIsNewTabPage' (Set the new tab page as the home page)\n\n- 'URLBlocklist' (Blokker tilgang til en liste over nettadresser) and 'URLAllowlist' (Define a list of allowed URLs) to scope the pages that browser can navigate to.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#addressbareditingenabled"
AddressBarMicrosoftSearchInBingProviderEnabled_Policy="Enable Microsoft Search in Bing suggestions in the address bar"
AddressBarMicrosoftSearchInBingProviderEnabled_Explain="Enables the display of relevant Microsoft Search in Bing suggestions in the address bar's suggestion list when the user types a search string in the address bar. If you enable or don't configure this policy, users can see internal results powered by Microsoft Search in Bing in the Microsoft Edge address bar suggestion list. To see the Microsoft Search in Bing results, the user must be signed into Microsoft Edge with their Azure AD account for that organization.\nIf you disable this policy, users can't see internal results in the Microsoft Edge address bar suggestion list.\nStarting with Microsoft Edge version 89, Microsoft Search in Bing suggestions will be available even if Bing isn't the user's default search provider.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#addressbarmicrosoftsearchinbingproviderenabled"
AdsSettingForIntrusiveAdsSites_Policy="Annonseinnstillinger for nettsteder med forstyrrende annonser"
AdsSettingForIntrusiveAdsSites_Explain="Controls whether ads are blocked on sites with intrusive ads.\n\nPolicy options mapping:\n\n* AllowAds (1) = Tillat annonser på alle nettsteder\n\n* BlockAds (2) = Block ads on sites with intrusive ads. (Default value)\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#adssettingforintrusiveadssites"
AdsSettingForIntrusiveAdsSites_Part="Annonseinnstillinger for nettsteder med forstyrrende annonser"
AdsSettingForIntrusiveAdsSites_AllowAds_DropDown="Tillat annonser på alle nettsteder"
AdsSettingForIntrusiveAdsSites_BlockAds_DropDown="Block ads on sites with intrusive ads. (Default value)"
AdsTransparencyEnabled_Policy="Configure if the ads transparency feature is enabled"
AdsTransparencyEnabled_Explain="Lets you decide whether the ads transparency feature is enabled. This behavior only applies to the "balanced" mode of tracking prevention, and does not impact "basic" or "strict" modes. Your users' tracking prevention level can be configured using the 'TrackingPrevention' (Block tracking of users' web-browsing activity) policy. AdsTransparencyEnabled will only have an effect if 'TrackingPrevention' is set to TrackingPreventionBalanced or is not configured.\n\nIf you enable or don't configure this policy, transparency metadata provided by ads will be available to the user when the feature is active.\n\nWhen the feature is enabled, Tracking Prevention will enable exceptions for the associated ad providers that have met Microsoft's privacy standards.\n\nIf you disable this policy, Tracking Prevention will not adjust its behavior even when transparency metadata is provided by ads.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#adstransparencyenabled"
AllowDeletingBrowserHistory_Policy="Gjør det mulig å slette nettleser- og nedlastingslogg"
AllowDeletingBrowserHistory_Explain="Enables deleting browser history and download history and prevents users from changing this setting.\n\nNote that even with this policy is disabled, the browsing and download history aren't guaranteed to be retained: users can edit or delete the history database files directly, and the browser itself may remove (based on expiration period) or archive any or all history items at any time.\n\nIf you enable this policy or don't configure it, users can delete the browsing and download history.\n\nIf you disable this policy, users can't delete browsing and download history. Disabling this policy will disable history sync and open tab sync.\n\nIf you enable this policy, don't enable the 'ClearBrowsingDataOnExit' (Clear browsing data when Microsoft Edge closes) policy, because they both deal with deleting data. If you enable both, the 'ClearBrowsingDataOnExit' policy takes precedence and deletes all data when Microsoft Edge closes, regardless of how this policy is configured.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#allowdeletingbrowserhistory"
AllowFileSelectionDialogs_Policy="Allow file selection dialogs"
AllowFileSelectionDialogs_Explain="Allow access to local files by letting Microsoft Edge display file selection dialogs.\n\nIf you enable or don't configure this policy, users can open file selection dialogs as normal.\n\nIf you disable this policy, whenever the user performs an action that triggers a file selection dialog (like importing favorites, uploading files, or saving links), a message is displayed instead, and the user is assumed to have clicked Cancel on the file selection dialog.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#allowfileselectiondialogs"
AllowGamesMenu_Policy="Allow users to access the games menu"
AllowGamesMenu_Explain="If you enable or don't configure this policy, users can access the games menu.\n\nIf you disable this policy, users won't be able to access the games menu.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#allowgamesmenu"
AllowPopupsDuringPageUnload_Policy="Tillater sider å vise forgrunnsvinduer mens de lastes ut (obsolete)"
AllowPopupsDuringPageUnload_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 87.\n\nThis policy allows an admin to specify that a page can show popups during its unloading.\n\nWhen the policy is set to enabled, pages are allowed to show popups while they're being unloaded.\n\nWhen the policy is set to disabled or unset, pages aren't allowed to show popups while they're being unloaded. This is as per the spec: (https://html.spec.whatwg.org/#apis-for-creating-and-navigating-browsing-contexts-by-name).\n\nThis policy was removed in Microsoft Edge 88 and is ignored if set.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#allowpopupsduringpageunload"
AllowSurfGame_Policy="Allow surf game"
AllowSurfGame_Explain="If you disable this policy, users won't be able to play the surf game when the device is offline or if the user navigates to edge://surf.\n\nIf you enable or don't configure this policy, users can play the surf game.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#allowsurfgame"
AllowSyncXHRInPageDismissal_Policy="Allow pages to send synchronous XHR requests during page dismissal (obsolete)"
AllowSyncXHRInPageDismissal_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 99.\n\nThis policy is obsolete because it was only intended to be a short-term mechanism to give enterprises more time to update their web content if and when it was found to be incompatible with the change to disallow synchronous XHR requests during page dismissal. It doesn't work in Microsoft Edge after version 99.\n\nThis policy lets you specify that a page can send synchronous XHR requests during page dismissal.\n\nIf you enable this policy, pages can send synchronous XHR requests during page dismissal.\n\nIf you disable this policy or don't configure this policy, pages aren't allowed to send synchronous XHR requests during page dismissal.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#allowsyncxhrinpagedismissal"
AllowTokenBindingForUrls_Policy="Configure the list of sites for which Microsoft Edge will attempt to establish a Token Binding with"
AllowTokenBindingForUrls_Explain="Configure the list of URL patterns for sites that the browser will attempt to perform the Token Binding protocol with.\nFor the domains on this list, the browser will send the Token Binding ClientHello in the TLS handshake (See https://tools.ietf.org/html/rfc8472).\nIf the server responds with a valid ServerHello response, the browser will create and send Token Binding messages on subsequent https requests. See https://tools.ietf.org/html/rfc8471 for more info.\n\nIf this list is empty, Token Binding will be disabled.\n\nThis policy is only available on Windows 10 devices with Virtual Secure Mode capability.\n\nStarting in Microsoft Edge 86, this policy no longer supports dynamic refresh.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#allowtokenbindingforurls"
AllowTokenBindingForUrls_Part="Configure the list of sites for which Microsoft Edge will attempt to establish a Token Binding with"
AllowTrackingForUrls_Policy="Configure tracking prevention exceptions for specific sites"
AllowTrackingForUrls_Explain="Configure the list of URL patterns that are excluded from tracking prevention.\n\nIf you configure this policy, the list of configured URL patterns is excluded from tracking prevention.\n\nIf you don't configure this policy, the global default value from the "Block tracking of users' web-browsing activity" policy (if set) or the user's personal configuration is used for all sites.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#allowtrackingforurls"
AllowTrackingForUrls_Part="Configure tracking prevention exceptions for specific sites"
AlternateErrorPagesEnabled_Policy="Suggest similar pages when a webpage can't be found"
AlternateErrorPagesEnabled_Explain="Allow Microsoft Edge to issue a connection to a web service to generate URL and search suggestions for connectivity issues such as DNS errors.\n\nIf you enable this policy, a web service is used to generate url and search suggestions for network errors.\n\nIf you disable this policy, no calls to the web service are made and a standard error page is shown.\n\nIf you don't configure this policy, Microsoft Edge respects the user preference that's set under Services at edge://settings/privacy.\nSpecifically, there's a **Suggest similar pages when a webpage can't be found** toggle, which the user can switch on or off. Note that if you have enable this policy (AlternateErrorPagesEnabled), the Suggest similar pages when a webpage can't be found setting is turned on, but the user can't change the setting by using the toggle. If you disable this policy, the Suggest similar pages when a webpage can't be found setting is turned off, and the user can't change the setting by using the toggle.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#alternateerrorpagesenabled"
AlwaysOpenPdfExternally_Policy="Always open PDF files externally"
AlwaysOpenPdfExternally_Explain="Disables the internal PDF viewer in Microsoft Edge.\n\nIf you enable this policy Microsoft Edge treats PDF files as downloads and lets users open them with the default application.\n\nIf Microsoft Edge is the default PDF reader, PDF files aren't downloaded and will continue to open in Microsoft Edge.\n\nIf you don't configure this policy or disable it, Microsoft Edge will open PDF files (unless the user disables it).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#alwaysopenpdfexternally"
AmbientAuthenticationInPrivateModesEnabled_Policy="Enable Ambient Authentication for InPrivate and Guest profiles"
AmbientAuthenticationInPrivateModesEnabled_Explain="Configure this policy to allow/disallow ambient authentication for InPrivate and Guest profiles in Microsoft Edge.\n\nAmbient Authentication is http authentication with default credentials when explicit credentials aren't provided via NTLM/Kerberos/Negotiate challenge/response schemes.\n\nIf you set the policy to 'RegularOnly', it allows ambient authentication for Regular sessions only. InPrivate and Guest sessions won't be allowed to ambiently authenticate.\n\nIf you set the policy to 'InPrivateAndRegular', it allows ambient authentication for InPrivate and Regular sessions. Guest sessions won't be allowed to ambiently authenticate.\n\nIf you set the policy to 'GuestAndRegular', it allows ambient authentication for Guest and Regular sessions. InPrivate sessions won't be allowed to ambiently authenticate\n\nIf you set the policy to 'All', it allows ambient authentication for all sessions.\n\nNote that ambient authentication is always allowed on regular profiles.\n\nIn Microsoft Edge version 81 and later, if the policy is left not set, ambient authentication will be enabled in regular sessions only.\n\nPolicy options mapping:\n\n* RegularOnly (0) = Enable ambient authentication in regular sessions only\n\n* InPrivateAndRegular (1) = Enable ambient authentication in InPrivate and regular sessions\n\n* GuestAndRegular (2) = Enable ambient authentication in guest and regular sessions\n\n* All (3) = Enable ambient authentication in regular, InPrivate and guest sessions\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#ambientauthenticationinprivatemodesenabled"
AmbientAuthenticationInPrivateModesEnabled_Part="Enable Ambient Authentication for InPrivate and Guest profiles"
AmbientAuthenticationInPrivateModesEnabled_RegularOnly_DropDown="Enable ambient authentication in regular sessions only"
AmbientAuthenticationInPrivateModesEnabled_InPrivateAndRegular_DropDown="Enable ambient authentication in InPrivate and regular sessions"
AmbientAuthenticationInPrivateModesEnabled_GuestAndRegular_DropDown="Enable ambient authentication in guest and regular sessions"
AmbientAuthenticationInPrivateModesEnabled_All_DropDown="Enable ambient authentication in regular, InPrivate and guest sessions"
AppCacheForceEnabled_Policy="Allows the AppCache feature to be re-enabled, even if it's turned off by default (obsolete)"
AppCacheForceEnabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 96.\n\nSupport for AppCache and this policy was removed from Microsoft Edge starting in version 97.\n\nIf you set this policy to true, the AppCache is enabled, even when AppCache in Microsoft Edge is not available by default.\n\nIf you set this policy to false, or don't set it, AppCache will follow Microsoft Edge's defaults.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#appcacheforceenabled"
ApplicationLocaleValue_Policy="Set application locale"
ApplicationLocaleValue_Explain="Configures the application locale in Microsoft Edge and prevents users from changing the locale.\n\nIf you enable this policy, Microsoft Edge uses the specified locale. If the configured locale isn't supported, 'en-US' is used instead.\n\nIf you disable or don't configure this setting, Microsoft Edge uses either the user-specified preferred locale (if configured) or the fallback locale 'en-US'.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#applicationlocalevalue"
ApplicationLocaleValue_Part="Lokalitet for program"
AudioCaptureAllowed_Policy="Allow or block audio capture"
AudioCaptureAllowed_Explain="Allows you to set whether a user is prompted to grant a website access to their audio capture device. This policy applies to all URLs except for those configured in the 'AudioCaptureAllowedUrls' (Sites that can access audio capture devices without requesting permission) list.\n\nIf you enable this policy or don't configure it (the default setting), the user is prompted for audio capture access except from the URLs in the 'AudioCaptureAllowedUrls' list. These listed URLs are granted access without prompting.\n\nIf you disable this policy, the user is not prompted, and audio capture is accessible only to the URLs configured in 'AudioCaptureAllowedUrls'.\n\nThis policy affects all types of audio inputs, not only the built-in microphone.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#audiocaptureallowed"
AudioCaptureAllowedUrls_Policy="Sites that can access audio capture devices without requesting permission"
AudioCaptureAllowedUrls_Explain="Specify websites, based on URL patterns, that can use audio capture devices without asking the user for permission. Patterns in this list are matched against the security origin of the requesting URL. If they match, the site is automatically granted access to audio capture devices.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#audiocaptureallowedurls"
AudioCaptureAllowedUrls_Part="Sites that can access audio capture devices without requesting permission"
AudioProcessHighPriorityEnabled_Policy="Allow the audio process to run with priority above normal on Windows"
AudioProcessHighPriorityEnabled_Explain="This policy controls the priority of the audio process on Windows.\nIf this policy is enabled, the audio process will run with above normal priority.\nIf this policy is disabled, the audio process will run with normal priority.\nIf this policy is not configured, the default configuration for the audio process will be used.\nThis policy is intended as a temporary measure to give enterprises the ability to\nrun audio with higher priority to address certain performance issues with audio capture.\nThis policy will be removed in the future.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#audioprocesshighpriorityenabled"
AudioSandboxEnabled_Policy="Allow the audio sandbox to run"
AudioSandboxEnabled_Explain="This policy controls the audio process sandbox.\n\nIf you enable this policy, the audio process will run sandboxed.\n\nIf you disable this policy, the audio process will run unsandboxed and the WebRTC audio-processing module will run in the renderer process.\nThis leaves users open to security risks related to running the audio subsystem unsandboxed.\n\nIf you don't configure this policy, the default configuration for the audio sandbox will be used, which might differ based on the platform.\n\nThis policy is intended to give enterprises flexibility to disable the audio sandbox if they use security software setups that interfere with the sandbox.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#audiosandboxenabled"
AutoImportAtFirstRun_Policy="Automatically import another browser's data and settings at first run"
AutoImportAtFirstRun_Explain="If you enable this policy, all supported datatypes and settings from the specified browser will be silently and automatically imported at first run. During the First Run Experience, the import section will also be skipped.\n\nThe browser data from Microsoft Edge Legacy will always be silently migrated at the first run, irrespective of the value of this policy.\n\nIf this policy is set to 'FromDefaultBrowser', then the datatypes corresponding to the default browser on the managed device will be imported.\n\nIf the browser specified as the value of this policy is not present in the managed device, Microsoft Edge will simply skip the import without any notification to the user.\n\nIf you set this policy to 'DisabledAutoImport', the import section of the first-run experience is skipped entirely and Microsoft Edge doesn't import browser data and settings automatically.\n\nIf this policy is set to the value of 'FromInternetExplorer', the following datatypes will be imported from Internet Explorer:\n1. Favorites or bookmarks\n2. Saved passwords\n3. Search engines\n4. Browsing history\n5. Home page\n\nIf this policy is set to the value of 'FromGoogleChrome', the following datatypes will be imported from Google Chrome:\n1. Favorites\n2. Saved passwords\n3. Addresses and more\n4. Payment info\n5. Browsing history\n6. Settings\n7. Pinned and Open tabs\n8. Extensions\n9. Cookies\n\nNote: For more details on what is imported from Google Chrome, please see https://go.microsoft.com/fwlink/?linkid=2120835\n\nIf this policy is set to the value of 'FromSafari', user data is no longer imported into Microsoft Edge. This is due to the way Full Disk Access works on Mac.\nOn macOS Mojave and above, it's no longer possible to have automated and unattended import of Safari data into Microsoft Edge.\n\nStarting with Microsoft Edge version 83, if this policy is set to the value of 'FromMozillaFirefox', the following datatypes will be imported from Mozilla Firefox:\n1. Favorites or bookmarks\n2. Saved passwords\n3. Addresses and more\n4. Browsing History\n\nIf you want to restrict specific datatypes from getting imported on the managed devices, you can use this policy with other policies such as 'ImportAutofillFormData' (Allow importing of autofill form data), 'ImportBrowserSettings' (Allow importing of browser settings), 'ImportFavorites' (Allow importing of favorites), and etc.\n\nPolicy options mapping:\n\n* FromDefaultBrowser (0) = Automatically imports all supported datatypes and settings from the default browser\n\n* FromInternetExplorer (1) = Automatically imports all supported datatypes and settings from Internet Explorer\n\n* FromGoogleChrome (2) = Automatically imports all supported datatypes and settings from Google Chrome\n\n* FromSafari (3) = Automatically imports all supported datatypes and settings from Safari\n\n* DisabledAutoImport (4) = Disables automatic import, and the import section of the first-run experience is skipped\n\n* FromMozillaFirefox (5) = Automatically imports all supported datatypes and settings from Mozilla Firefox\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#autoimportatfirstrun"
AutoImportAtFirstRun_Part="Automatically import another browser's data and settings at first run"
AutoImportAtFirstRun_FromDefaultBrowser_DropDown="Automatically imports all supported datatypes and settings from the default browser"
AutoImportAtFirstRun_FromInternetExplorer_DropDown="Automatically imports all supported datatypes and settings from Internet Explorer"
AutoImportAtFirstRun_FromGoogleChrome_DropDown="Automatically imports all supported datatypes and settings from Google Chrome"
AutoImportAtFirstRun_FromSafari_DropDown="Automatically imports all supported datatypes and settings from Safari"
AutoImportAtFirstRun_DisabledAutoImport_DropDown="Disables automatic import, and the import section of the first-run experience is skipped"
AutoImportAtFirstRun_FromMozillaFirefox_DropDown="Automatically imports all supported datatypes and settings from Mozilla Firefox"
AutoLaunchProtocolsComponentEnabled_Policy="AutoLaunch Protocols Component Enabled"
AutoLaunchProtocolsComponentEnabled_Explain="Specifies whether the AutoLaunch Protocols component should be enabled. This component allows Microsoft to provide a list similar to that of the 'AutoLaunchProtocolsFromOrigins' (Define a list of protocols that can launch an external application from listed origins without prompting the user) policy, allowing certain external protocols to launch without prompt or blocking certain protocols (on specified origins). By default, this component is enabled.\n\nIf you enable or don't configure this policy, the AutoLaunch Protocols component is enabled.\n\nIf you disable this policy, the AutoLaunch Protocols component is disabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#autolaunchprotocolscomponentenabled"
AutoLaunchProtocolsFromOrigins_Policy="Define a list of protocols that can launch an external application from listed origins without prompting the user"
AutoLaunchProtocolsFromOrigins_Explain="Allows you to set a list of protocols, and for each protocol an associated list of allowed origin patterns, that can launch an external application without prompting the user. The trailing separator should not be included when listing the protocol. For example, list "skype" instead of "skype:" or "skype://".\n\nIf you configure this policy, a protocol will only be permitted to launch an external application without prompting by policy if:\n\n- the protocol is listed\n\n- the origin of the site trying to launch the protocol matches one of the origin patterns in that protocol's allowed_origins list.\n\nIf either condition is false, the external protocol launch prompt will not be omitted by policy.\n\nIf you don't configure this policy, no protocols can launch without a prompt. Users can opt out of prompts on a per-protocol/per-site basis unless the 'ExternalProtocolDialogShowAlwaysOpenCheckbox' (Show an "Always open" checkbox in external protocol dialog) policy is set to Disabled. This policy has no impact on per-protocol/per-site prompt exemptions set by users.\n\nThe origin matching patterns use a similar format to those for the 'URLBlocklist' (Blokker tilgang til en liste over nettadresser) policy, which are documented at https://go.microsoft.com/fwlink/?linkid=2095322.\n\nHowever, origin matching patterns for this policy cannot contain "/path" or "@query" elements. Any pattern that does contain a "/path" or "@query" element will be ignored.\n\nThis policy does not work as expected with file://* wildcards.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#autolaunchprotocolsfromorigins"
AutoLaunchProtocolsFromOrigins_Part="Define a list of protocols that can launch an external application from listed origins without prompting the user"
AutoOpenAllowedForURLs_Policy="URLs where AutoOpenFileTypes can apply"
AutoOpenAllowedForURLs_Explain="A list of URLs to which 'AutoOpenFileTypes' (List of file types that should be automatically opened on download) will apply to. This policy has no impact on automatically open values set by users via the download shelf ... > "Always open files of this type" menu entry.\n\nIf you set URLs in this policy, files will only automatically open by policy if the URL is part of this set and the file type is listed in 'AutoOpenFileTypes'. If either condition is false, the download won't automatically open by policy.\n\nIf you don't set this policy, all downloads where the file type is in 'AutoOpenFileTypes' will automatically open.\n\nA URL pattern has to be formatted according to https://go.microsoft.com/fwlink/?linkid=2095322.\n\nThis policy does not work as expected with file://* wildcards.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#autoopenallowedforurls"
AutoOpenAllowedForURLs_Part="URLs where AutoOpenFileTypes can apply"
AutoOpenFileTypes_Policy="List of file types that should be automatically opened on download"
AutoOpenFileTypes_Explain="This policy sets a list of file types that should be automatically opened on download. Note: The leading separator should not be included when listing the file type, so list "txt" instead of ".txt".\n\nBy default, these file types will be automatically opened on all URLs. You can use the 'AutoOpenAllowedForURLs' (URLs where AutoOpenFileTypes can apply) policy to restrict the URLs for which these file types will be automatically opened on.\n\nFiles with types that should be automatically opened will still be subject to the enabled Microsoft Defender SmartScreen checks and won't be opened if they fail those checks.\n\nFile types that a user has already specified to automatically be opened will continue to do so when downloaded. The user will continue to be able to specify other file types to be automatically opened.\n\nIf you don't set this policy, only file types that a user has already specified to automatically be opened will do so when downloaded.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#autoopenfiletypes"
AutoOpenFileTypes_Part="List of file types that should be automatically opened on download"
AutofillAddressEnabled_Policy="Slå på autofyll for adresser"
AutofillAddressEnabled_Explain="Enables the AutoFill feature and allows users to auto-complete address information in web forms using previously stored information.\n\nIf you disable this policy, AutoFill never suggests or fills in address information, nor does it save additional address information that the user might submit while browsing the web.\n\nIf you enable this policy or don't configure it, users can control AutoFill for addresses in the user interface.\n\nNote that if you disable this policy you also stop all activity for all web forms, except payment and password forms. No further entries are saved, and Microsoft Edge won't suggest or AutoFill any previous entries.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#autofilladdressenabled"
AutofillCreditCardEnabled_Policy="Enable AutoFill for payment instruments"
AutofillCreditCardEnabled_Explain="Enables Microsoft Edge's AutoFill feature and lets users auto complete payment instruments like credit or debit cards in web forms using previously stored information. This includes suggesting new payment instruments like Buy Now Pay Later (BNPL) in web forms and Express Checkout.\n\nIf you enable this policy or don't configure it, users can control AutoFill for payment instruments.\n\nIf you disable this policy, AutoFill never suggests, fills, or recommends new payment Instruments. Additionally, it won't save any payment instrument information that users submit while browsing the web.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#autofillcreditcardenabled"
AutomaticHttpsDefault_Policy="Configure Automatic HTTPS"
AutomaticHttpsDefault_Explain="This policy lets you manage settings for 'AutomaticHttpsDefault' (Configure Automatic HTTPS), which switches connections from HTTP to HTTPS.\n\nThis feature helps protect against man-in-the-middle attacks by enforcing more secure connections, but users might experience more connection errors.\n\nNote: The 'UpgradeCapableDomains' configuration requires a component list, and will not upgrade these connections if 'ComponentUpdatesEnabled' (Aktivér komponentoppdateringer i Microsoft Edge) is set to 'Disabled'.\n\nIf you don't configure this policy, 'AutomaticHttpsDefault' will be enabled, and will only upgrade connections on domains likely to support HTTPS.\n\nPolicy options mapping:\n\n* DisableAutomaticHttps (0) = Automatic HTTPS functionality is disabled.\n\n* UpgradeCapableDomains (1) = Navigations delivered over HTTP are switched to HTTPS, only on domains likely to support HTTPS.\n\n* AlwaysUpgrade (2) = All navigations delivered over HTTP are switched to HTTPS. Connection errors might occur more often.\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#automatichttpsdefault"
AutomaticHttpsDefault_Part="Configure Automatic HTTPS"
AutomaticHttpsDefault_DisableAutomaticHttps_DropDown="Automatic HTTPS functionality is disabled."
AutomaticHttpsDefault_UpgradeCapableDomains_DropDown="Navigations delivered over HTTP are switched to HTTPS, only on domains likely to support HTTPS."
AutomaticHttpsDefault_AlwaysUpgrade_DropDown="All navigations delivered over HTTP are switched to HTTPS. Connection errors might occur more often."
AutoplayAllowed_Policy="Allow media autoplay for websites"
AutoplayAllowed_Explain="This policy sets the media autoplay policy for websites.\n\nThe default setting, "Not configured" respects the current media autoplay settings and lets users configure their autoplay settings.\n\nSetting to "Enabled" sets media autoplay to "Allow".  All websites are allowed to autoplay media. Users can't override this policy.\n\nSetting to "Disabled" sets media autoplay to "Limit".  This limits websites that are allowed to autoplay media to webpages with high media engagement and active WebRTC streams. Prior to Microsoft Edge version 92, this would set media autoplay to "Block". Users can't override this policy.\n\nA tab will need to be closed and re-opened for this policy to take effect.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#autoplayallowed"
AutoplayAllowlist_Policy="Allow media autoplay on specific sites"
AutoplayAllowlist_Explain="Define a list of sites, based on URL patterns, that are allowed to autoplay media.\n\nIf you don't configure this policy, the global default value from the 'AutoplayAllowed' (Allow media autoplay for websites) policy (if set) or the user's personal configuration is used for all sites.\n\nFor detailed information about valid url patterns, see https://go.microsoft.com/fwlink/?linkid=2095322.\n\nNote: * is not an accepted value for this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#autoplayallowlist"
AutoplayAllowlist_Part="Allow media autoplay on specific sites"
BackgroundModeEnabled_Policy="Continue running background apps after Microsoft Edge closes"
BackgroundModeEnabled_Explain="Allows Microsoft Edge processes to start at OS sign-in and keep running after the last browser window is closed. In this scenario, background apps and the current browsing session remain active, including any session cookies. An open background process displays an icon in the system tray and can always be closed from there.\n\nIf you enable this policy, background mode is turned on.\n\nIf you disable this policy, background mode is turned off.\n\nIf you don't configure this policy, background mode is initially turned off, and the user can configure its behavior in edge://settings/system.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#backgroundmodeenabled"
BackgroundTemplateListUpdatesEnabled_Policy="Enables background updates to the list of available templates for Collections and other features that use templates (deprecated)"
BackgroundTemplateListUpdatesEnabled_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nThis policy is deprecated because we are moving to a new policy. It won't work in Microsoft Edge as soon as version 104. The new policy to use is 'EdgeAssetDeliveryServiceEnabled' (Allow features to download assets from the Asset Delivery Service).\n\nLets you enable or disable background updates to the list of available templates for Collections and other features that use templates.  Templates are used to extract rich metadata from a webpage when the page is saved to a collection.\n\nIf you enable this setting or the setting is unconfigured, the list of available templates will be downloaded in the background from a Microsoft service every 24 hours.\n\nIf you disable this setting the list of available templates will be downloaded on demand. This type of download might result in small performance penalties for Collections and other features.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#backgroundtemplatelistupdatesenabled"
BingAdsSuppression_Policy="Block all ads on Bing search results"
BingAdsSuppression_Explain="Enables an ad-free search experience on Bing.com\n\nIf you enable this policy, then a user can search on bing.com and have an ad-free search experience. At the same time, the SafeSearch setting will be set to 'Strict' and can't be changed by the user.\n\nIf you don't configure this policy, then the default experience will have ads in the search results on bing.com. SafeSearch will be set to 'Moderate' by default and can be changed by the user.\n\nThis policy is only available for K-12 SKUs that are identified as EDU tenants by Microsoft.\n\nPlease refer to https://go.microsoft.com/fwlink/?linkid=2119711 to learn more about this policy or if the following scenarios apply to you:\n\n* You have an EDU tenant, but the policy doesn't work.\n\n* You had your IP allowlisted for having an ad free search experience.\n\n* You were experiencing an ad-free search experience on Microsoft Edge Legacy and want to upgrade to the new version of Microsoft Edge.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#bingadssuppression"
BlockThirdPartyCookies_Policy="Blokkér tredjeparts informasjonskapsler"
BlockThirdPartyCookies_Explain="Block web page elements that aren't from the domain that's in the address bar from setting cookies.\n\nIf you enable this policy, web page elements that are not from the domain that is in the address bar can't set cookies\n\nIf you disable this policy, web page elements from domains other than in the address bar can set cookies.\n\nIf you don't configure this policy, third-party cookies are enabled but users can change this setting.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#blockthirdpartycookies"
FavoritesBarEnabled_Policy="Enable favorites bar"
FavoritesBarEnabled_Explain="Enables or disables the favorites bar.\n\nIf you enable this policy, users will see the favorites bar.\n\nIf you disable this policy, users won't see the favorites bar.\n\nIf this policy is not configured, then the user can decide to use the favorites bar or not.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#favoritesbarenabled"
BrowserAddProfileEnabled_Policy="Enable profile creation from the Identity flyout menu or the Settings page"
BrowserAddProfileEnabled_Explain="Allows users to create new profiles, using the **Add profile** option.\nIf you enable this policy or don't configure it, Microsoft Edge allows users to use **Add profile** on the Identity flyout menu or the Settings page to create new profiles.\n\nIf you disable this policy, users cannot add new profiles from the Identity flyout menu or the Settings page.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#browseraddprofileenabled"
BrowserGuestModeEnabled_Policy="Aktiver gjestemodus"
BrowserGuestModeEnabled_Explain="Enable the option to allow the use of guest profiles in Microsoft Edge. In a guest profile, the browser doesn't import browsing data from existing profiles, and it deletes browsing data when all guest profiles are closed.\n\nIf you enable this policy or don't configure it, Microsoft Edge lets users browse in guest profiles.\n\nIf you disable this policy, Microsoft Edge doesn't let users browse in guest profiles.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#browserguestmodeenabled"
BrowserLegacyExtensionPointsBlockingEnabled_Policy="Enable browser legacy extension point blocking"
BrowserLegacyExtensionPointsBlockingEnabled_Explain="Sets the ProcessExtensionPointDisablePolicy on Microsoft Edge's browser process to block code injection from legacy third party applications.\n\nIf you enable or don't configure this policy, the ProcessExtensionPointDisablePolicy is applied to block legacy extension points in the browser process.\n\nIf you disable this policy, the ProcessExtensionPointDisablePolicy is not applied to block legacy extension points in the browser process. This has a detrimental effect on Microsoft Edge's security and stability as unknown and potentially hostile code can load inside Microsoft Edge's browser process. Only turn off the policy if there are compatibility issues with third-party software that must run inside Microsoft Edge's browser process.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#browserlegacyextensionpointsblockingenabled"
BrowserNetworkTimeQueriesEnabled_Policy="Allow queries to a Browser Network Time service"
BrowserNetworkTimeQueriesEnabled_Explain="Prevents Microsoft Edge from occasionally sending queries to a browser network time service to retrieve an accurate timestamp.\n\nIf you disable this policy, Microsoft Edge will stop sending queries to a browser network time service.\n\nIf you enable this policy or don't configure it, Microsoft Edge will occasionally send queries to a browser network time service.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#browsernetworktimequeriesenabled"
BrowserSignin_Policy="Browser sign-in settings"
BrowserSignin_Explain="Specify whether a user can sign into Microsoft Edge with their account and use account-related services like sync and single sign on. To control the availability of sync, use the 'SyncDisabled' (Disable synchronization of data using Microsoft sync services) policy instead.\n\nIf you set this policy to 'Disable', make sure that you also set the 'NonRemovableProfileEnabled' (Configure whether a user always has a default profile automatically signed in with their work or school account) policy to disabled because 'NonRemovableProfileEnabled' disables the creation of an automatically signed in browser profile. If both policies are set, Microsoft Edge will use the 'Disable browser sign-in' policy and behave as if 'NonRemovableProfileEnabled' is set to disabled.\n\nIf you set this policy to 'Enable', users can sign into the browser. Signing into the browser doesn't mean that sync is turned on by default; the user must separately opt-in to use this feature.\n\nIf you set this policy to 'Force', users must sign into a profile to use the browser. By default, this will allow the user to choose whether they want to sync to their account, unless sync is disabled by the domain admin or with the 'SyncDisabled' policy. The default value of 'BrowserGuestModeEnabled' (Aktiver gjestemodus) policy is set to false.\n\nIf you don't configure this policy users can decide if they want to enable the browser sign-in option and use it as they see fit.\n\nPolicy options mapping:\n\n* Disable (0) = Deaktiver nettleserpålogging\n\n* Enable (1) = Aktiver nettleserpålogging\n\n* Force (2) = Tving brukere til å logge på for å bruke nettleseren\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#browsersignin"
BrowserSignin_Part="Browser sign-in settings"
BrowserSignin_Disable_DropDown="Deaktiver nettleserpålogging"
BrowserSignin_Enable_DropDown="Aktiver nettleserpålogging"
BrowserSignin_Force_DropDown="Tving brukere til å logge på for å bruke nettleseren"
BrowsingDataLifetime_Policy="Browsing Data Lifetime Settings"
BrowsingDataLifetime_Explain="Configures browsing data lifetime settings for Microsoft Edge.\nThis policy controls the lifetime of selected browsing data. This policy has no effect if Sync is enabled.\nThe available data types are the 'browsing_history', 'download_history', 'cookies_and_other_site_data', 'cached_images_and_files', 'password_signin', 'autofill', 'site_settings' and 'hosted_app_data'.\nMicrosoft Edge will regularly remove data of selected types that is older than 'time_to_live_in_hours'. The deletion of expired data will happen 15 seconds after the browser starts then every hour while the browser is running.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#browsingdatalifetime"
BrowsingDataLifetime_Part="Browsing Data Lifetime Settings"
BuiltInDnsClientEnabled_Policy="Bruk innebygd DNS-klient"
BuiltInDnsClientEnabled_Explain="Controls whether to use the built-in DNS client.\n\nThis policy controls which software stack is used to communicate with the DNS server: the operating system DNS client, or Microsoft Edge's built-in DNS client. This policy does not affect which DNS servers are used: if, for example, the operating system is configured to use an enterprise DNS server, that same server would be used by the built-in DNS client. It also does not control if DNS-over-HTTPS is used; Microsoft Edge always uses the built-in resolver for DNS-over-HTTPS requests. Please see the 'DnsOverHttpsMode' (Control the mode of DNS-over-HTTPS) policy for information on controlling DNS-over-HTTPS.\n\nIf you enable this policy, the built-in DNS client is used, if it's available.\n\nIf you disable this policy, the built-in DNS client is only used when DNS-over-HTTPS is in use.\n\nIf you don't configure this policy, the built-in DNS client is enabled by default on macOS and Android (when neither Private DNS nor VPN are enabled).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#builtindnsclientenabled"
CECPQ2Enabled_Policy="CECPQ2 post-quantum key-agreement enabled for TLS"
CECPQ2Enabled_Explain="If this policy is not configured, or is set to enabled, then Microsoft Edge will follow the default rollout process for CECPQ2, a post-quantum key-agreement algorithm in TLS.\n\nCECPQ2 results in larger TLS messages which, in very rare cases, can trigger bugs in some networking hardware. This policy can be set to False to disable CECPQ2 while networking issues are resolved.\n\nThis policy is a temporary measure and will be removed in future versions of Microsoft Edge.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#cecpq2enabled"
CORSNonWildcardRequestHeadersSupport_Policy="CORS non-wildcard request header support enabled (deprecated)"
CORSNonWildcardRequestHeadersSupport_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nThis policy lets you configure support of CORS non-wildcard request headers.\n\nMicrosoft Edge version 97 introduces support for CORS non-wildcard request headers. When a script makes a cross-origin network request via fetch() and XMLHttpRequest with a script-added Authorization header, the header must be explicitly allowed by the Access-Control-Allow-Headers header in the CORS preflight response. "Explicitly" here means that the wild card symbol "*" doesn't cover the Authorization header. See https://go.microsoft.com/fwlink/?linkid=2180022 for more detail.\n\nIf you enable or don't configure the policy, Microsoft Edge will support the CORS non-wildcard request headers and behave as previously described.\n\nIf you disable this policy, Microsoft Edge will allow the wildcard symbol ("*") in the Access-Control-Allow-Headers header in the CORS preflight response to cover the Authorization header.\n\nThis policy is a temporary workaround for the new CORS non-wildcard request header feature. It's intended to be removed after Microsoft Edge version 103.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#corsnonwildcardrequestheaderssupport"
CertificateTransparencyEnforcementDisabledForCas_Policy="Deaktiver tvungen sertifikatåpenhet for en liste med subjectPublicKeyInfo-hasher"
CertificateTransparencyEnforcementDisabledForCas_Explain="Disables enforcement of Certificate Transparency requirements for a list of subjectPublicKeyInfo hashes.\n\nThis policy lets you disable Certificate Transparency disclosure requirements for certificate chains that contain certificates with one of the specified subjectPublicKeyInfo hashes. This allows certificates that would otherwise be untrusted because they were not properly publicly disclosed to still be used for Enterprise hosts.\n\nTo disable Certificate Transparency enforcement when this policy is set, one of the following sets of conditions must be met:\n1. The hash is of the server certificate's subjectPublicKeyInfo.\n2. The hash is of a subjectPublicKeyInfo that appears in a CA certificate in the certificate chain, that CA certificate is constrained via the X.509v3 nameConstraints extension, one or more directoryName nameConstraints are present in the permittedSubtrees, and the directoryName contains an organizationName attribute.\n3. The hash is of a subjectPublicKeyInfo that appears in a CA certificate in the certificate chain, the CA certificate has one or more organizationName attributes in the certificate Subject, and the server's certificate contains the same number of organizationName attributes, in the same order, and with byte-for-byte identical values.\n\nA subjectPublicKeyInfo hash is specified by concatenating the hash algorithm name, the "/" character, and the Base64 encoding of that hash algorithm applied to the DER-encoded subjectPublicKeyInfo of the specified certificate. This Base64 encoding is the same format as an SPKI Fingerprint, as defined in RFC 7469, Section 2.4. Unrecognized hash algorithms are ignored. The only supported hash algorithm at this time is "sha256".\n\nIf you disable this policy or don't configure it, any certificate that's required to be disclosed via Certificate Transparency will be treated as untrusted if it's not disclosed according to the Certificate Transparency policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#certificatetransparencyenforcementdisabledforcas"
CertificateTransparencyEnforcementDisabledForCas_Part="Deaktiver tvungen sertifikatåpenhet for en liste med subjectPublicKeyInfo-hasher"
CertificateTransparencyEnforcementDisabledForLegacyCas_Policy="Disable Certificate Transparency enforcement for a list of legacy certificate authorities"
CertificateTransparencyEnforcementDisabledForLegacyCas_Explain="Disables enforcing Certificate Transparency requirements for a list of legacy certificate authorities (Cas).\n\nThis policy lets you disable Certificate Transparency disclosure requirements for certificate chains that contain certificates with one of the specified subjectPublicKeyInfo hashes. This allows certificates that would otherwise be untrusted because they were not properly publicly disclosed, continue to be used for enterprise hosts.\n\nIn order for Certificate Transparency enforcement to be disabled, you must set the hash to a subjectPublicKeyInfo appearing in a CA certificate that is recognized as a legacy certificate authority (CA). A legacy CA is a CA that has been publicly trusted by default by one or more operating systems supported by Microsoft Edge.\n\nYou specify a subjectPublicKeyInfo hash by concatenating the hash algorithm name, the "/" character, and the Base64 encoding of that hash algorithm applied to the DER-encoded subjectPublicKeyInfo of the specified certificate. This Base64 encoding is the same format as an SPKI Fingerprint, as defined in RFC 7469, Section 2.4. Unrecognized hash algorithms are ignored. The only supported hash algorithm at this time is "sha256".\n\nIf you don't configure this policy, any certificate that's required to be disclosed via Certificate Transparency will be treated as untrusted if it isn't disclosed according to the Certificate Transparency policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#certificatetransparencyenforcementdisabledforlegacycas"
CertificateTransparencyEnforcementDisabledForLegacyCas_Part="Disable Certificate Transparency enforcement for a list of legacy certificate authorities"
CertificateTransparencyEnforcementDisabledForUrls_Policy="Disable Certificate Transparency enforcement for specific URLs"
CertificateTransparencyEnforcementDisabledForUrls_Explain="Disables enforcing Certificate Transparency requirements for the listed URLs.\n\nThis policy lets you not disclose certificates for the hostnames in the specified URLs via Certificate Transparency. This lets you use certificates that would otherwise be untrusted, because they weren't properly publicly disclosed, but it makes it harder to detect mis-issued certificates for those hosts.\n\nForm your URL pattern according to https://go.microsoft.com/fwlink/?linkid=2095322. Because certificates are valid for a given hostname, independent of the scheme, port, or path, only the hostname part of the URL is considered. Wildcard hosts are not supported.\n\nIf you don't configure this policy, any certificate that should be disclosed via Certificate Transparency is treated as untrusted if it's not disclosed.\n\nThis policy does not work as expected with file://* wildcards.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#certificatetransparencyenforcementdisabledforurls"
CertificateTransparencyEnforcementDisabledForUrls_Part="Disable Certificate Transparency enforcement for specific URLs"
ClearBrowsingDataOnExit_Policy="Clear browsing data when Microsoft Edge closes"
ClearBrowsingDataOnExit_Explain="Microsoft Edge doesn't clear the browsing data by default when it closes. Browsing data includes information entered in forms, passwords, and even the websites visited.\n\nIf you enable this policy, all browsing data is deleted each time Microsoft Edge closes. Note that if you enable this policy, it takes precedence over how you configured 'DefaultCookiesSetting' (Configure cookies)\n\nIf you disable or don't configure this policy, users can configure the Clear browsing data option in Settings.\n\nIf you enable this policy, don't configure the 'AllowDeletingBrowserHistory' (Gjør det mulig å slette nettleser- og nedlastingslogg) or the 'ClearCachedImagesAndFilesOnExit' (Clear cached images and files when Microsoft Edge closes) policy, because they all deal with deleting browsing data. If you configure the preceding policies and this policy, all browsing data is deleted when Microsoft Edge closes, regardless of how you configured 'AllowDeletingBrowserHistory' or 'ClearCachedImagesAndFilesOnExit'.\n\nTo exclude cookies from being deleted on exit, configure the 'SaveCookiesOnExit' (Save cookies when Microsoft Edge closes) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#clearbrowsingdataonexit"
ClearCachedImagesAndFilesOnExit_Policy="Clear cached images and files when Microsoft Edge closes"
ClearCachedImagesAndFilesOnExit_Explain="Microsoft Edge doesn't clear cached images and files by default when it closes.\n\nIf you enable this policy, cached images and files will be deleted each time Microsoft Edge closes.\n\nIf you disable this policy, users cannot configure the cached images and files option in edge://settings/clearBrowsingDataOnClose.\n\nIf you don't configure this policy, users can choose whether cached images and files are cleared on exit.\n\nIf you disable this policy, don't enable the 'ClearBrowsingDataOnExit' (Clear browsing data when Microsoft Edge closes) policy, because they both deal with deleting data. If you configure both, the 'ClearBrowsingDataOnExit' policy takes precedence and deletes all data when Microsoft Edge closes, regardless of how you configured 'ClearCachedImagesAndFilesOnExit' (Clear cached images and files when Microsoft Edge closes).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#clearcachedimagesandfilesonexit"
ClickOnceEnabled_Policy="Allow users to open files using the ClickOnce protocol"
ClickOnceEnabled_Explain="Allow users to open files using the ClickOnce protocol. The ClickOnce protocol allows websites to request that the browser open files from a specific URL using the ClickOnce file handler on the user's computer or device.\n\nIf you enable this policy, users can open files using the ClickOnce protocol. This policy overrides the user's ClickOnce setting in the edge://flags/ page.\n\nIf you disable this policy, users can't open files using the ClickOnce protocol. Instead, the file will be saved to the file system using the browser. This policy overrides the user's ClickOnce setting in the edge://flags/ page.\n\nIf you don't configure this policy, users with Microsoft Edge versions before Microsoft Edge 87 can't open files using the ClickOnce protocol by default. However, they have the option to enable the use of the ClickOnce protocol with the edge://flags/ page. Users with Microsoft Edge versions 87 and later can open files using the ClickOnce protocol by default but have the option to disable the ClickOnce protocol with edge://flags/ page.\n\nDisabling ClickOnce may prevent ClickOnce applications (.application files) from launching properly.\n\nFor more information about ClickOnce, see https://go.microsoft.com/fwlink/?linkid=2103872 and https://go.microsoft.com/fwlink/?linkid=2099880.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#clickonceenabled"
CollectionsServicesAndExportsBlockList_Policy="Block access to a specified list of services and export targets in Collections"
CollectionsServicesAndExportsBlockList_Explain="List specific services and export targets that users can't access in the Collections feature in Microsoft Edge. This includes displaying additional data from Bing and exporting collections to Microsoft products or external partners.\n\nIf you enable this policy, services and export targets that match the given list are blocked.\n\nIf you don't configure this policy, no restrictions on the acceptable services and export targets are enforced.\n\nPolicy options mapping:\n\n* pinterest_suggestions (pinterest_suggestions) = Pinterest suggestions\n\n* collections_share (collections_share) = Sharing of Collections\n\n* local_pdf (local_pdf) = Save local PDFs in Collections to OneDrive\n\n* send_word (send_word) = Send collection to Microsoft Word\n\n* send_excel (send_excel) = Send collection to Microsoft Excel\n\n* send_onenote (send_onenote) = Send collection to Microsoft OneNote\n\n* send_pinterest (send_pinterest) = Send collection to Pinterest\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#collectionsservicesandexportsblocklist"
CollectionsServicesAndExportsBlockList_Part="Block access to a specified list of services and export targets in Collections"
CommandLineFlagSecurityWarningsEnabled_Policy="Slå på sikkerhetsadvarsler for kommandolinjeflagg"
CommandLineFlagSecurityWarningsEnabled_Explain="If disabled, this policy prevents security warnings from appearing when Microsoft Edge is launched with potentially dangerous command-line flags.\n\nIf enabled or unset, security warnings are displayed when these command-line flags are used to launch Microsoft Edge.\n\nFor example, the --disable-gpu-sandbox flag generates this warning:  You're using an unsupported command-line flag: --disable-gpu-sandbox. This poses stability and security risks.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#commandlineflagsecuritywarningsenabled"
ComponentUpdatesEnabled_Policy="Aktivér komponentoppdateringer i Microsoft Edge"
ComponentUpdatesEnabled_Explain="If you enable or don't configure this policy, component updates are enabled in Microsoft Edge.\n\nIf you disable this policy or set it to false, component updates are disabled for all components in Microsoft Edge.\n\nHowever, some components are exempt from this policy. This includes any component that doesn't contain executable code, that doesn't significantly alter the behavior of the browser, or that's critical for security. That is, updates that are deemed "critical for security" are still applied even if you disable this policy.\n\nExamples of such components include the certificate revocation lists and security lists like tracking prevention lists.\n\nPlease note that disabling this policy can potentially prevent the Microsoft Edge developers from providing critical security fixes in a timely manner and is thus not recommended.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#componentupdatesenabled"
ConfigureDoNotTrack_Policy="Configure Do Not Track"
ConfigureDoNotTrack_Explain="Specify whether to send Do Not Track requests to websites that ask for tracking info. Do Not Track requests let the websites you visit know that you don't want your browsing activity to be tracked. By default, Microsoft Edge doesn't send Do Not Track requests, but users can turn on this feature to send them.\n\nIf you enable this policy, Do Not Track requests are always sent to websites asking for tracking info.\n\nIf you disable this policy, requests are never sent.\n\nIf you don't configure this policy, users can choose whether to send these requests.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#configuredonottrack"
ConfigureFriendlyURLFormat_Policy="Configure the default paste format of URLs copied from Microsoft Edge, and determine if additional formats will be available to users"
ConfigureFriendlyURLFormat_Explain="If FriendlyURLs are enabled, Microsoft Edge will compute additional representations of the URL and place them on the clipboard.\n\nThis policy configures what format will be pasted when the user pastes in external applications, or inside Microsoft Edge without the 'Paste as' context menu item.\n\nIf configured, this policy makes a choice on behalf of the user. The options in edge://settings/shareCopyPaste will be grayed out, and the options in the 'Paste As' context menu will not be available.\n\n* Not configured = The user will be able to choose their preferred paste format. By default, this is set to the friendly URL format. The 'Paste As' menu will be available in Microsoft Edge.\n\n* 1 = No additional formats will be stored on the clipboard. There will be no 'Paste as' context menu item in Microsoft Edge and the only format available to paste will be the plain text URL format. Effectively, the friendly URL feature will be disabled.\n\n* 3 = The user will get a friendly URL whenever they paste into surfaces that accept rich text. The plain URL will still be available for non-rich surfaces. There will be no 'Paste As' menu in Microsoft Edge.\n\n* 4 = (Not currently used)\n\nThe richer formats may not be well-supported in some paste destinations and/or websites. As such, if this policy is to be configured, then the plain URL option is recommended.\n\nPolicy options mapping:\n\n* PlainText (1) = The plain URL without any extra information, such as the page's title. This is the recommended option when this policy is configured. For more information, see the description.\n\n* TitledHyperlink (3) = Titled Hyperlink: A hyperlink that points to the copied URL, but whose visible text is the title of the destination page. This is the Friendly URL format.\n\n* WebPreview (4) = Coming soon. If set, behaves the same as 'Plain URL'.\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#configurefriendlyurlformat"
ConfigureFriendlyURLFormat_Part="Configure the default paste format of URLs copied from Microsoft Edge, and determine if additional formats will be available to users"
ConfigureFriendlyURLFormat_PlainText_DropDown="The plain URL without any extra information, such as the page's title. This is the recommended option when this policy is configured. For more information, see the description."
ConfigureFriendlyURLFormat_TitledHyperlink_DropDown="Titled Hyperlink: A hyperlink that points to the copied URL, but whose visible text is the title of the destination page. This is the Friendly URL format."
ConfigureFriendlyURLFormat_WebPreview_DropDown="Coming soon. If set, behaves the same as 'Plain URL'."
ConfigureKeyboardShortcuts_Policy="Configure the list of commands for which to disable keyboard shortcuts"
ConfigureKeyboardShortcuts_Explain="Configure the list of Microsoft Edge commands for which to disable keyboard shortcuts.\n\nSee https://go.microsoft.com/fwlink/?linkid=2186950 for a list of possible commands to disable.\n\nIf you enable this policy, commands in the 'disabled' list will no longer be activated by keyboard shortcuts.\n\nIf you disable this policy, all keyboard shortcuts behave as usual.\n\nNote: Disabling a command will only remove its shortcut mapping. Commands in the 'disabled' list will still function if accessed via browser UI.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#configurekeyboardshortcuts"
ConfigureKeyboardShortcuts_Part="Configure the list of commands for which to disable keyboard shortcuts"
ConfigureOnPremisesAccountAutoSignIn_Policy="Configure automatic sign in with an Active Directory domain account when there is no Azure AD domain account"
ConfigureOnPremisesAccountAutoSignIn_Explain="Enable the use of Active Directory accounts for automatic sign in if your users' machines are Domain Joined and your environment is not hybrid joined. If you want users automatically signed in with their Azure Active Directory accounts instead, please Azure AD join (See https://go.microsoft.com/fwlink/?linkid=2118197 for more information) or hybrid join (See https://go.microsoft.com/fwlink/?linkid=2118365 for more information) your environment.\n\nOn every launch, Microsoft Edge will try to sign-in using this policy, as long as the first profile being launched isn't signed-in or an auto sign-in hasn't happened before.\n\nIf you have configured the 'BrowserSignin' (Browser sign-in settings) policy to disabled, this policy will not take any effect.\n\nIf you enable this policy and set it to 'SignInAndMakeDomainAccountNonRemovable', Microsoft Edge will automatically sign in users that are on domain joined machines using their Active Directory accounts.\n\nIf you set this policy to 'Disabled' or don't set it, Microsoft Edge will not automatically sign in users that are on domain joined machines with Active Directory accounts.\n\nFrom Microsoft Edge 89 onwards, if there is an existing on-premises profile with 'RoamingProfileSupportEnabled' (Enable using roaming copies for Microsoft Edge profile data) policy disabled and machine is now hybrid joined i.e it has an Azure AD account, it will auto-upgrade the on-premises profile to Azure AD profile to get full Azure AD sync facilities.\n\nFrom Microsoft Edge 93 onwards, if policy 'ImplicitSignInEnabled' (Enable implicit sign-in) is disabled, this policy will not take any effect.\n\nFrom Microsoft Edge 94 onwards, if policy 'OnlyOnPremisesImplicitSigninEnabled' (Only on-premises account enabled for implicit sign-in) is enabled, and this policy is set to 'SignInAndMakeDomainAccountNonRemovable', it will take effect even on hybrid joined environment. Microsoft Edge will automatically sign in users using their Active Directory domain account even if there are MSA or AAD accounts.\n\nPolicy options mapping:\n\n* Disabled (0) = Disabled\n\n* SignInAndMakeDomainAccountNonRemovable (1) = Sign in and make domain account non-removable\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#configureonpremisesaccountautosignin"
ConfigureOnPremisesAccountAutoSignIn_Part="Configure automatic sign in with an Active Directory domain account when there is no Azure AD domain account"
ConfigureOnPremisesAccountAutoSignIn_Disabled_DropDown="Disabled"
ConfigureOnPremisesAccountAutoSignIn_SignInAndMakeDomainAccountNonRemovable_DropDown="Sign in and make domain account non-removable"
ConfigureOnlineTextToSpeech_Policy="Configure Online Text To Speech"
ConfigureOnlineTextToSpeech_Explain="Set whether the browser can leverage Online Text to Speech voice fonts, part of Azure Cognitive Services. These voice fonts are higher quality than the pre-installed system voice fonts.\n\nIf you enable or don't configure this policy, web-based applications that use the SpeechSynthesis API can use Online Text to Speech voice fonts.\n\nIf you disable this policy, the voice fonts aren't available.\n\nRead more about this feature here:\nSpeechSynthesis API: https://go.microsoft.com/fwlink/?linkid=2110038\nCognitive Services: https://go.microsoft.com/fwlink/?linkid=2110141\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#configureonlinetexttospeech"
ConfigureShare_Policy="Configure the Share experience"
ConfigureShare_Explain="If you set this policy to 'ShareAllowed' (the default), users will be able to access the Share experience from the Settings and More Menu in Microsoft Edge to share with other apps on the system.\n\nIf you set this policy to 'ShareDisallowed', users won't be able to access the Share experience. If the Share button is on the toolbar, it will also be hidden.\n\nPolicy options mapping:\n\n* ShareAllowed (0) = Allow using the Share experience\n\n* ShareDisallowed (1) = Don't allow using the Share experience\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#configureshare"
ConfigureShare_Part="Configure the Share experience"
ConfigureShare_ShareAllowed_DropDown="Allow using the Share experience"
ConfigureShare_ShareDisallowed_DropDown="Don't allow using the Share experience"
ConfigureViewInFileExplorer_Policy="Configure the View in File Explorer feature for SharePoint pages in Microsoft Edge"
ConfigureViewInFileExplorer_Explain="This setting allows you to configure the View in File Explorer capability for file management in SharePoint Online while using Microsoft Edge.\n\nYou will need to list the specific domains where this is allowed and list cookies needed for SharePoint authentication (rtFa and FedAuth).\n\nBehind the scenes, the policy allows URLs with the viewinfileexplorer: scheme to open WebDAV URLs in Windows File Explorer on pages matching the list of domains and uses the cookies you specified for WebDAV authentication.\n\nIf you enable this policy, you can use the "View in File Explorer" feature on the SharePoint document libraries you list. You will need to specify the SharePoint domain and authentication cookies. See example value below.\n\nIf you disable or don't configure this policy, you cannot use the "View in File Explorer" feature on SharePoint document libraries.\n\nNote that while this is an available option through Microsoft Edge, rather than use the View in File Explorer option, the recommended approach to managing files and folders outside of SharePoint is to sync your SharePoint files or move or copy files in SharePoint.\nSync your SharePoint files: https://go.microsoft.com/fwlink/p/?linkid=2166983\nMove or copy files in SharePoint: https://go.microsoft.com/fwlink/p/?linkid=2167123\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, or Windows 10 Pro or Enterprise instances enrolled for device management.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#configureviewinfileexplorer"
ConfigureViewInFileExplorer_Part="Configure the View in File Explorer feature for SharePoint pages in Microsoft Edge"
CrossOriginWebAssemblyModuleSharingEnabled_Policy="Specifies whether WebAssembly modules can be sent cross-origin (obsolete)"
CrossOriginWebAssemblyModuleSharingEnabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 98.\n\nSpecifies whether WebAssembly modules can be sent to another window or worker cross-origin. Cross-origin WebAssembly module sharing was deprecated as part of the efforts to deprecate document.domain, see https://github.com/mikewest/deprecating-document-domain. This policy allowed re-enabling of cross-origin WebAssembly module sharing. This policy is obsolete because it was intended to offer a longer transition period in the deprecation process.\n\nIf you enable this policy, sites can send WebAssembly modules cross-origin\nwithout restrictions.\n\nIf you disable or don't configure this policy, sites can only send\nWebAssembly modules to windows and workers in the same origin.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#crossoriginwebassemblymodulesharingenabled"
CustomHelpLink_Policy="Specify custom help link"
CustomHelpLink_Explain="Specify a link for the Help menu or the F1 key.\n\nIf you enable this policy, an admin can specify a link for the Help menu or the F1 key.\n\nIf you disable or don't configure this policy, the default link for the Help menu or the F1 key is used.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#customhelplink"
CustomHelpLink_Part="Specify custom help link"
DNSInterceptionChecksEnabled_Policy="DNS interception checks enabled"
DNSInterceptionChecksEnabled_Explain="This policy configures a local switch that can be used to disable DNS interception checks. These checks attempt to discover whether the browser is behind a proxy that redirects unknown host names.\n\nThis detection might not be necessary in an enterprise environment where the network configuration is known. It can be disabled to avoid additional DNS and HTTP traffic on start-up and each DNS configuration change.\n\nIf you enable or don't set this policy, the DNS interception checks are performed.\n\nIf you disable this policy, DNS interception checks aren't performed.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#dnsinterceptionchecksenabled"
DefaultBrowserSettingEnabled_Policy="Set Microsoft Edge as default browser"
DefaultBrowserSettingEnabled_Explain="If you set this policy to True, Microsoft Edge always checks whether it's the default browser on startup and, if possible, automatically registers itself.\n\nIf you set this policy to False, Microsoft Edge is stopped from ever checking if it's the default and turns user controls off for this option.\n\nIf you don't set this policy, Microsoft Edge lets users control whether it's the default and, if not, whether user notifications should appear.\n\nNote for Windows administrators: This policy only works for PCs running Windows 7. For later versions of Windows, you have to deploy a "default application associations" file that makes Microsoft Edge the handler for the https and http protocols (and, optionally, the ftp protocol and file formats such as .html, .htm, .pdf, .svg, .webp). See https://go.microsoft.com/fwlink/?linkid=2094932 for more information.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultbrowsersettingenabled"
DefaultSearchProviderContextMenuAccessAllowed_Policy="Allow default search provider context menu search access"
DefaultSearchProviderContextMenuAccessAllowed_Explain="Enables the use of a default search provider on the context menu.\n\nIf you set this policy to disabled the search context menu item that relies on your default search provider and sidebar search will not be available.\n\nIf this policy is set to enabled or not set, the context menu item for your default search provider and sidebar search will be available.\n\nThe policy value is only appled when the 'DefaultSearchProviderEnabled' (Aktiver standard søkeleverandør) policy is enabled, and is not applicable otherwise.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultsearchprovidercontextmenuaccessallowed"
DefaultSensorsSetting_Policy="Default sensors setting"
DefaultSensorsSetting_Explain="Set whether websites can access and use sensors such as motion and light sensors. You can completely block or allow websites to get access to sensors.\n\nSetting the policy to 1 lets websites access and use sensors. Setting the policy to 2 denies acess to sensors.\n\nYou can override this policy for specific URL patterns by using the 'SensorsAllowedForUrls' (Allow access to sensors on specific sites) and 'SensorsBlockedForUrls' (Block access to sensors on specific sites) policies.\n\nIf you don't configure this policy, websites can access and use sensors, and users can change this setting. This is the global default for 'SensorsAllowedForUrls' and 'SensorsBlockedForUrls'.\n\nPolicy options mapping:\n\n* AllowSensors (1) = Allow sites to access sensors\n\n* BlockSensors (2) = Do not allow any site to access sensors\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultsensorssetting"
DefaultSensorsSetting_Part="Default sensors setting"
DefaultSensorsSetting_AllowSensors_DropDown="Allow sites to access sensors"
DefaultSensorsSetting_BlockSensors_DropDown="Do not allow any site to access sensors"
DefaultSerialGuardSetting_Policy="Control use of the Serial API"
DefaultSerialGuardSetting_Explain="Set whether websites can access serial ports. You can completely block access or ask the user each time a website wants to get access to a serial port.\n\nSetting the policy to 3 lets websites ask for access to serial ports. Setting the policy to 2 denies access to serial ports.\n\nYou can override this policy for specific URL patterns by using the 'SerialAskForUrls' (Allow the Serial API on specific sites) and 'SerialBlockedForUrls' (Block the Serial API on specific sites) policies.\n\nIf you don't configure this policy, by default, websites can ask users whether they can access a serial port, and users can change this setting.\n\nPolicy options mapping:\n\n* BlockSerial (2) = Do not allow any site to request access to serial ports via the Serial API\n\n* AskSerial (3) = Allow sites to ask for user permission to access a serial port\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#defaultserialguardsetting"
DefaultSerialGuardSetting_Part="Control use of the Serial API"
DefaultSerialGuardSetting_BlockSerial_DropDown="Do not allow any site to request access to serial ports via the Serial API"
DefaultSerialGuardSetting_AskSerial_DropDown="Allow sites to ask for user permission to access a serial port"
DefinePreferredLanguages_Policy="Define an ordered list of preferred languages that websites should display in if the site supports the language"
DefinePreferredLanguages_Explain="Configures the language variants that Microsoft Edge sends to websites as part of the Accept-Language request HTTP header and prevents users from adding, removing, or changing the order of preferred languages in Microsoft Edge settings. Users who want to change the languages Microsoft Edge displays in or offers to translate pages to will be limited to the languages configured in this policy.\n\nIf you enable this policy, websites will appear in the first language in the list that they support unless other site-specific logic is used to determine the display language. The language variants defined in this policy override the languages configured as part of the 'SpellcheckLanguage' (Enable specific spellcheck languages) policy.\n\nIf you don't configure or disable this policy, Microsoft Edge sends websites the user-specified preferred languages as part of the Accept-Language request HTTP header.\n\nFor detailed information on valid language variants, see https://go.microsoft.com/fwlink/?linkid=2148854.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#definepreferredlanguages"
DefinePreferredLanguages_Part="Define an ordered list of preferred languages that websites should display in if the site supports the language"
DelayNavigationsForInitialSiteListDownload_Policy="Require that the Enterprise Mode Site List is available before tab navigation"
DelayNavigationsForInitialSiteListDownload_Explain="Lets you specify whether Microsoft Edge tabs wait to navigate until the browser has downloaded the initial Enterprise Mode Site List. This setting is intended for the scenario where the browser home page should load in Internet Explorer mode, and it is important that is does so on browser first run after IE mode is enabled. If this scenario does not exist, we recommend not enabling this setting because it can negatively impact the performance of loading the home page. The setting only applies when Microsoft Edge does not have a cached Enterprise Mode Site List, such as on browser first run after IE mode is enabled.\n\nThis setting works in conjunction with:\n'InternetExplorerIntegrationLevel' (Configure Internet Explorer integration) is set to 'IEMode'\nand\n'InternetExplorerIntegrationSiteList' (Configure the Enterprise Mode Site List) policy where the list has at least one entry.\n\nThe timeout behavior of this policy can be configured with the 'NavigationDelayForInitialSiteListDownloadTimeout' (Set a timeout for delay of tab navigation for the Enterprise Mode Site List) policy.\n\nIf you set this policy to 'All', when Microsoft Edge does not have a cached version of the Enterprise Mode Site List, tabs delay navigating until the browser has downloaded the site list. Sites configured to open in Internet Explorer mode by the site list will load in Internet Explorer mode, even during the initial navigation of the browser. Sites that cannot possibly be configured to open in Internet Explorer, such as any site with a scheme other than http:, https:, file:, or ftp: do not delay navigating and load immediately in Edge mode.\n\nIf you set this policy to 'None' or don't configure it, when Microsoft Edge does not have a cached version of the Enterprise Mode Site List, tabs will navigate immediately, and not wait for the browser to download the Enterprise Mode Site List. Sites configured to open in Internet Explorer mode by the site list will open in Microsoft Edge mode until the browser has finished downloading the Enterprise Mode Site List.\n\nPolicy options mapping:\n\n* None (0) = None\n\n* All (1) = All eligible navigations\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#delaynavigationsforinitialsitelistdownload"
DelayNavigationsForInitialSiteListDownload_Part="Require that the Enterprise Mode Site List is available before tab navigation"
DelayNavigationsForInitialSiteListDownload_None_DropDown="None"
DelayNavigationsForInitialSiteListDownload_All_DropDown="All eligible navigations"
DeleteDataOnMigration_Policy="Delete old browser data on migration"
DeleteDataOnMigration_Explain="This policy determines whether user browsing data from Microsoft Edge Legacy will be deleted after migrating to the Microsoft Edge version 81 or later.\n\nIf you set this policy to "Enabled", all browsing data from Microsoft Edge Legacy after migrating to the Microsoft Edge version 81 or later will be deleted. This policy must be set before migrating to the Microsoft Edge version 81 or later to have any effect on existing browsing data.\n\nIf you set this policy to "Disabled", or the policy is not configured, user browsing data isn't deleted after migrating to the Microsoft Edge version 83 or later.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#deletedataonmigration"
DeveloperToolsAvailability_Policy="Control where developer tools can be used"
DeveloperToolsAvailability_Explain="Control where developer tools can be used.\n\nIf you set this policy to 'DeveloperToolsDisallowedForForceInstalledExtensions' (the default), users can access the developer tools and the JavaScript console in general, but not in the context of extensions installed by enterprise policy.\n\nIf you set this policy to 'DeveloperToolsAllowed', users can access the developer tools and the JavaScript console in all contexts, including extensions installed by enterprise policy.\n\nIf you set this policy to 'DeveloperToolsDisallowed', users can't access the developer tools or inspect website elements. Keyboard shortcuts and menu or context menu entries that open the developer tools or the JavaScript Console are disabled.\n\nPolicy options mapping:\n\n* DeveloperToolsDisallowedForForceInstalledExtensions (0) = Block the developer tools on extensions installed by enterprise policy, allow in other contexts\n\n* DeveloperToolsAllowed (1) = Allow using the developer tools\n\n* DeveloperToolsDisallowed (2) = Don't allow using the developer tools\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#developertoolsavailability"
DeveloperToolsAvailability_Part="Control where developer tools can be used"
DeveloperToolsAvailability_DeveloperToolsDisallowedForForceInstalledExtensions_DropDown="Block the developer tools on extensions installed by enterprise policy, allow in other contexts"
DeveloperToolsAvailability_DeveloperToolsAllowed_DropDown="Allow using the developer tools"
DeveloperToolsAvailability_DeveloperToolsDisallowed_DropDown="Don't allow using the developer tools"
DiagnosticData_Policy="Send required and optional diagnostic data about browser usage"
DiagnosticData_Explain="This policy controls sending required and optional diagnostic data about browser usage to Microsoft.\n\nRequired diagnostic data is collected keep Microsoft Edge secure, up to date and performing as expected.\n\nOptional diagnostic data includes data about how you use the browser, websites you visit and crash reports to Microsoft for product and service improvement.\n\nThis policy is not supported on Windows 10 devices. To control this data collection on Windows 10, IT admins must use the Windows diagnostic data group policy. This policy will either be 'Allow Telemetry' or 'Allow Diagnostic Data', depending on the version of Windows. Learn more about Windows 10 diagnostic data collection: https://go.microsoft.com/fwlink/?linkid=2099569\n\nUse one of the following settings to configure this policy:\n\n'Off' turns off required and optional diagnostic data collection. This option is not recommended.\n\n'RequiredData' sends required diagnostic data but turns off optional diagnostic data collection. Microsoft Edge will send required diagnostic data to keep Microsoft Edge secure, up to date and performing as expected.\n\n'OptionalData' sends optional diagnostic data includes data about browser usage, websites that are visited, crash reports sent to Microsoft for product and service improvement.\n\nOn Windows 7/macOS, this policy controls sending required and optional data to Microsoft.\n\nIf you don't configure this policy or disable it, Microsoft Edge will default to the user's preference.\n\nPolicy options mapping:\n\n* Off (0) = Off (Not recommended)\n\n* RequiredData (1) = Required data\n\n* OptionalData (2) = Optional data\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#diagnosticdata"
DiagnosticData_Part="Send required and optional diagnostic data about browser usage"
DiagnosticData_Off_DropDown="Off (Not recommended)"
DiagnosticData_RequiredData_DropDown="Required data"
DiagnosticData_OptionalData_DropDown="Optional data"
DirectInvokeEnabled_Policy="Allow users to open files using the DirectInvoke protocol"
DirectInvokeEnabled_Explain="Allow users to open files using the DirectInvoke protocol. The DirectInvoke protocol allows websites to request that the browser open files from a specific URL using a specific file handler on the user's computer or device.\n\nIf you enable or don't configure this policy, users can open files using the DirectInvoke protocol.\n\nIf you disable this policy, users can't open files using the DirectInvoke protocol. Instead, the file will be saved to the file system.\n\nNote: Disabling DirectInvoke may prevent certain Microsoft SharePoint Online features from working as expected.\n\nFor more information about DirectInvoke, see https://go.microsoft.com/fwlink/?linkid=2103872 and https://go.microsoft.com/fwlink/?linkid=2099871.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#directinvokeenabled"
Disable3DAPIs_Policy="Deaktiver støtte for programmeringsgrensesnitt for 3D-grafikk"
Disable3DAPIs_Explain="Prevent web pages from accessing the graphics processing unit (GPU). Specifically, web pages can't access the WebGL API and plug-ins can't use the Pepper 3D API.\n\nIf you don't configure or disable this policy, it potentially allows web pages to use the WebGL API and plug-ins to use the Pepper 3D API. Microsoft Edge might, by default, still require command line arguments to be passed in order to use these APIs.\n\nIf 'HardwareAccelerationModeEnabled' (Bruk maskinvareakselerasjon når det er tilgjengelig) policy is set to false, the setting for 'Disable3DAPIs' policy is ignored - it's the equivalent of setting 'Disable3DAPIs' policy to true.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#disable3dapis"
DisableScreenshots_Policy="Deaktiver mulighet til å ta skjermdumper"
DisableScreenshots_Explain="Controls if users can take screenshots of the browser page.\n\nIf enabled, user can't take screenshots by using keyboard shortcuts or extension APIs.\n\nIf disabled or don't configure this policy, users can take screenshots.\n\nPlease note this policy controls screenshots taken from within the browser itself. Even if you enable this policy, users might still be able to take screenshots using some method outside of the browser (like using an operating system feature or another application).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#disablescreenshots"
DiskCacheDir_Policy="Angi katalog for diskbufring"
DiskCacheDir_Explain="Configures the directory to use to store cached files.\n\nIf you enable this policy, Microsoft Edge uses the provided directory regardless of whether the user has specified the '--disk-cache-dir' flag. To avoid data loss or other unexpected errors, don't configure this policy to a volume's root directory or to a directory used for other purposes, because Microsoft Edge manages its contents.\n\nSee https://go.microsoft.com/fwlink/?linkid=2095041 for a list of variables you can use when specifying directories and paths.\n\nIf you don't configure this policy, the default cache directory is used, and users can override that default with the '--disk-cache-dir' command line flag.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#diskcachedir"
DiskCacheDir_Part="Angi katalog for diskbufring"
DiskCacheSize_Policy="Set disk cache size, in bytes"
DiskCacheSize_Explain="Configures the size of the cache, in bytes, used to store files on the disk.\n\nIf you enable this policy, Microsoft Edge uses the provided cache size regardless of whether the user has specified the '--disk-cache-size' flag. The value specified in this policy isn't a hard boundary but rather a suggestion to the caching system; any value below a few megabytes is too small and will be rounded up to a reasonable minimum.\n\nIf you set the value of this policy to 0, the default cache size is used, and users can't change it.\n\nIf you don't configure this policy, the default size is used, but users can override it with the '--disk-cache-size' flag.\n\nNote: The value specified in this policy is used as a hint to various cache subsystems in the browser. The aggregate disk usage of all caches may therefore be larger than (but within the same order of magnitude as) the value specified.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#diskcachesize"
DiskCacheSize_Part="Angi størrelse på diskbuffer"
DisplayCapturePermissionsPolicyEnabled_Policy="Specifies whether the display-capture permissions-policy is checked or skipped"
DisplayCapturePermissionsPolicyEnabled_Explain="The display-capture permissions-policy gates access to getDisplayMedia(),\nas per this spec:\nhttps://www.w3.org/TR/screen-capture/#feature-policy-integration\nHowever, if this policy is Disabled, this requirement is not enforced,\nand getDisplayMedia() is allowed from contexts that would otherwise be\nforbidden. This Enterprise policy is temporary; it's intended to be\nremoved after Microsoft Edge version 100.\nIt is intended to unblock Enterprise users whose application is non-spec compliant,\nbut needs time to be fixed.\n\nIf you enable or don't configure this policy, sites can only call getDisplayMedia() from\ncontexts which are allowlisted by the display-capture permissions-policy.\n\nIf you disable this policy, sites can call getDisplayMedia() even from contexts\nwhich are not allowlisted by the display-capture permissions policy.\nNote that other restrictions may still apply.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#displaycapturepermissionspolicyenabled"
DnsOverHttpsMode_Policy="Control the mode of DNS-over-HTTPS"
DnsOverHttpsMode_Explain="Control the mode of the DNS-over-HTTPS resolver. Note that this policy will only set the default mode for each query. The mode can be overridden for special types of queries such as requests to resolve a DNS-over-HTTPS server hostname.\n\nThe "off" mode will disable DNS-over-HTTPS.\n\nThe "automatic" mode will send DNS-over-HTTPS queries first if a DNS-over-HTTPS server is available and may fallback to sending insecure queries on error.\n\nThe "secure" mode will only send DNS-over-HTTPS queries and will fail to resolve on error.\n\nIf you don't configure this policy, the browser might send DNS-over-HTTPS requests to a resolver associated with the user's configured system resolver.\n\nPolicy options mapping:\n\n* off (off) = Disable DNS-over-HTTPS\n\n* automatic (automatic) = Enable DNS-over-HTTPS with insecure fallback\n\n* secure (secure) = Enable DNS-over-HTTPS without insecure fallback\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#dnsoverhttpsmode"
DnsOverHttpsMode_Part="Control the mode of DNS-over-HTTPS"
DnsOverHttpsMode_off_DropDown="Disable DNS-over-HTTPS"
DnsOverHttpsMode_automatic_DropDown="Enable DNS-over-HTTPS with insecure fallback"
DnsOverHttpsMode_secure_DropDown="Enable DNS-over-HTTPS without insecure fallback"
DnsOverHttpsTemplates_Policy="Specify URI template of desired DNS-over-HTTPS resolver"
DnsOverHttpsTemplates_Explain="The URI template of the desired DNS-over-HTTPS resolver. To specify multiple DNS-over-HTTPS resolvers, separate the corresponding URI templates with spaces.\n\nIf you set 'DnsOverHttpsMode' (Control the mode of DNS-over-HTTPS) to "secure" then this policy must be set and cannot be empty.\n\nIf you set 'DnsOverHttpsMode' to "automatic" and this policy is set then the URI templates specified will be used. If you don't set this policy, then hardcoded mappings will be used to attempt to upgrade the user's current DNS resolver to a DoH resolver operated by the same provider.\n\nIf the URI template contains a dns variable, requests to the resolver will use GET; otherwise requests will use POST.\n\nIncorrectly formatted templates will be ignored.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#dnsoverhttpstemplates"
DnsOverHttpsTemplates_Part="Specify URI template of desired DNS-over-HTTPS resolver"
DoNotSilentlyBlockProtocolsFromOrigins_Policy="Define a list of protocols that can not be silently blocked by anti-flood protection"
DoNotSilentlyBlockProtocolsFromOrigins_Explain="Allows you to create a list of protocols, and for each protocol an associated list of allowed origin patterns. These origins won't be silently blocked from launching an external application by anti-flood protection. The trailing separator shouldn't be included when listing the protocol. For example, list "skype" instead of "skype:" or "skype://".\n\nIf you configure this policy, a protocol will only be permitted to bypass being silently blocked by anti-flood protection if:\n\n- the protocol is listed\n\n- the origin of the site trying to launch the protocol matches one of the origin patterns in that protocol's allowed_origins list.\n\nIf either condition is false, the external protocol launch may be blocked by anti-flood protection.\n\nIf you don't configure this policy, no protocols can bypass being silently blocked.\n\nThe origin matching patterns use a similar format to those for the 'URLBlocklist' (Blokker tilgang til en liste over nettadresser) policy, that are documented at https://go.microsoft.com/fwlink/?linkid=2095322.\n\nHowever, origin matching patterns for this policy cannot contain "/path" or "@query" elements. Any pattern that does contain a "/path" or "@query" element will be ignored.\n\nThis policy doesn't work as expected with file://* wildcards.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#donotsilentlyblockprotocolsfromorigins"
DoNotSilentlyBlockProtocolsFromOrigins_Part="Define a list of protocols that can not be silently blocked by anti-flood protection"
DownloadDirectory_Policy="Angi nedlastingskatalog"
DownloadDirectory_Explain="Configures the directory to use when downloading files.\n\nIf you enable this policy, Microsoft Edge uses the provided directory regardless of whether the user has specified one or chosen to be prompted for download location every time. See https://go.microsoft.com/fwlink/?linkid=2095041 for a list of variables that can be used.\n\nIf you disable or don't configure this policy, the default download directory is used, and the user can change it.\n\nIf you set an invalid path, Microsoft Edge will default to the user's default download directory.\n\nIf the folder specified by the path doesn't exist, the download will trigger a prompt that asks the user where they want to save their download.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#downloaddirectory"
DownloadDirectory_Part="Angi nedlastingskatalog"
DownloadRestrictions_Policy="Tillat begrensninger for nedlastinger"
DownloadRestrictions_Explain="Configures the type of downloads that Microsoft Edge completely blocks, without letting users override the security decision.\n\nSet 'BlockDangerousDownloads' to allow all downloads except for those that carry Microsoft Defender SmartScreen warnings of known or potentially dangerous downloads or that have dangerous file type extensions.\n\nSet 'BlockPotentiallyDangerousDownloads' to allow all downloads except for those that carry Microsoft Defender SmartScreen warnings of potentially dangerous or unwanted downloads or that have dangerous file type extensions.\n\nSet 'BlockAllDownloads' to block all downloads.\n\nSet 'BlockMaliciousDownloads' to allow all downloads except for those that carry Microsoft Defender SmartScreen warnings of known malicious downloads.\n\nIf you don't configure this policy or set the 'DefaultDownloadSecurity' option, the downloads go through the usual security restrictions based on Microsoft Defender SmartScreen analysis results.\n\nNote that these restrictions apply to downloads from web page content, as well as the 'download link...' context menu option. These restrictions don't apply to saving or downloading the currently displayed page, nor do they apply to the Save as PDF option from the printing options.\n\nSee https://go.microsoft.com/fwlink/?linkid=2094934 for more info on Microsoft Defender SmartScreen.\n\nPolicy options mapping:\n\n* DefaultDownloadSecurity (0) = Ingen spesielle begrensninger\n\n* BlockDangerousDownloads (1) = Block malicious downloads and dangerous file types\n\n* BlockPotentiallyDangerousDownloads (2) = Block potentially dangerous or unwanted downloads and dangerous file types\n\n* BlockAllDownloads (3) = Blokkér alle nedlastinger\n\n* BlockMaliciousDownloads (4) = Block malicious downloads\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#downloadrestrictions"
DownloadRestrictions_Part="Begrensninger for nedlastinger"
DownloadRestrictions_DefaultDownloadSecurity_DropDown="Ingen spesielle begrensninger"
DownloadRestrictions_BlockDangerousDownloads_DropDown="Block malicious downloads and dangerous file types"
DownloadRestrictions_BlockPotentiallyDangerousDownloads_DropDown="Block potentially dangerous or unwanted downloads and dangerous file types"
DownloadRestrictions_BlockAllDownloads_DropDown="Blokkér alle nedlastinger"
DownloadRestrictions_BlockMaliciousDownloads_DropDown="Block malicious downloads"
EdgeAssetDeliveryServiceEnabled_Policy="Allow features to download assets from the Asset Delivery Service"
EdgeAssetDeliveryServiceEnabled_Explain="The Asset Delivery Service is a general pipeline used to deliver assets to the Microsoft Edge Clients.\nThese assets can be config files or Machine Learning models that power the features that use this service.\n\nIf you enable or don't configure this policy, features can download assets from the Asset Delivery Service.\n\nIf you disable this policy, features won't be able to download assets needed for them to run correctly.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#edgeassetdeliveryserviceenabled"
EdgeCollectionsEnabled_Policy="Enable the Collections feature"
EdgeCollectionsEnabled_Explain="Lets you allow users to access the Collections feature, where they can collect, organize, share, and export content more efficiently and with Office integration.\n\nIf you enable or don't configure this policy, users can access and use the Collections feature in Microsoft Edge.\n\nIf you disable this policy, users can't access and use Collections in Microsoft Edge.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#edgecollectionsenabled"
EdgeDiscoverEnabled_Policy="Discover feature In Microsoft Edge"
EdgeDiscoverEnabled_Explain="This policy lets you configure the Discover feature in Microsoft Edge.\n\nWorking in the background when enabled, this feature sends URLs to Microsoft Bing to search for related recommendations.\n\nIf you enable or don't configure this policy, you can use the Discover button on Microsoft Edge to start using this feature.\n\nIf you disable this policy, you can't use the Discover feature in Microsoft Edge.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#edgediscoverenabled"
EdgeEnhanceImagesEnabled_Policy="Enhance images enabled"
EdgeEnhanceImagesEnabled_Explain="Set whether Microsoft Edge can automatically enhance images to show you sharper images with better color, lighting, and contrast.\n\nIf you enable this policy or don't configure the policy, Microsoft Edge will automatically enhance images on specific web applications.\n\nIf you disable this policy, Microsoft Edge will not enhance images.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#edgeenhanceimagesenabled"
EdgeFollowEnabled_Policy="Enable Follow service in Microsoft Edge"
EdgeFollowEnabled_Explain="Allows the Microsoft Edge browser to enable Follow service and apply it to users.\n\nUsers can use the Follow an influencer, site, or topic in Microsoft Edge..\n\nIf you enable or don't configure this policy, Follow in Microsoft Edge can be applied.\n\nIf you disable this policy, Microsoft Edge will not communicate with Follow service to provide the follow feature.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#edgefollowenabled"
EdgeShoppingAssistantEnabled_Policy="Shopping in Microsoft Edge Enabled"
EdgeShoppingAssistantEnabled_Explain="This policy lets users compare the prices of a product they are looking at, get coupons or rebates from the website they're on, auto-apply coupons and help checkout faster using autofill data.\n\nIf you enable or don't configure this policy, shopping features such as price comparison, coupons, rebates and express checkout will be automatically applied for retail domains. Coupons for the current retailer and prices from other retailers will be fetched from a server.\n\nIf you disable this policy shopping features such as price comparison, coupons, rebates and express checkout will not be automatically found for retail domains.\n\nStarting in version 90.0.818.56, the behavior of the messaging letting users know that there is a coupon, rebate, price comparison or price history available on shopping domains is also done through a horizontal banner below the address bar. Previously this messaging was done on the address bar.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#edgeshoppingassistantenabled"
EditFavoritesEnabled_Policy="Allows users to edit favorites"
EditFavoritesEnabled_Explain="Enable this policy to let users add, remove, and modify favorites. This is the default behavior if you don't configure the policy.\n\nDisable this policy to stop users from adding, removing, or modifying favorites. They can still use existing favorites.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#editfavoritesenabled"
EnableDeprecatedWebPlatformFeatures_Policy="Re-enable deprecated web platform features for a limited time (obsolete)"
EnableDeprecatedWebPlatformFeatures_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 86.\n\nThis policy is obsolete because dedicated web platform policies are now used to manage individual web platform feature deprecations.\n\nSpecify a list of deprecated web platform features to temporarily re-enable.\n\nThis policy lets you re-enable deprecated web platform features for a limited time. Features are identified by a string tag.\n\nIf you don't configure this policy, if the list is empty, or if a feature doesn't match one of the supported string tags, all deprecated web platform features remain disabled.\n\nWhile the policy itself is supported on the above platforms, the feature it's enabling might not be available on all of those platforms. Not all deprecated Web Platform features can be re-enabled. Only those explicitly listed below can be re-enabled, and only for a limited period of time, which differs per feature. You can review the intent behind the Web Platform feature changes at https://bit.ly/blinkintents.\n\nThe general format of the string tag is [DeprecatedFeatureName]_EffectiveUntil[yyyymmdd].\n\nPolicy options mapping:\n\n* ExampleDeprecatedFeature (ExampleDeprecatedFeature_EffectiveUntil20080902) = Slå på ExampleDeprecatedFeature API frem til og med 2008/09/02\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enabledeprecatedwebplatformfeatures"
EnableDeprecatedWebPlatformFeatures_Part="Re-enable deprecated web platform features for a limited time"
EnableDomainActionsDownload_Policy="Enable Domain Actions Download from Microsoft (obsolete)"
EnableDomainActionsDownload_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 84.\n\nThis policy doesn't work because conflicting states should be avoided. This policy was used to enable/disable download of the domain actions list, but it didn't always achieve the desired state. The Experimentation and Configuration Service, which handles the download, has its own policy to configure what is downloaded from the service. Use the 'ExperimentationAndConfigurationServiceControl' (Control communication with the Experimentation and Configuration Service) policy instead.\n\nIn Microsoft Edge, Domain Actions represent a series of compatibility features that help the browser work correctly on the web.\n\nMicrosoft keeps a list of actions to take on certain domains for compatibility reasons. For example, the browser may override the User Agent string on a website if that website is broken due to the new User Agent string on Microsoft Edge. Each of these actions is intended to be temporary while Microsoft tries to resolve the issue with the site owner.\n\nWhen the browser starts up and then periodically afterwards, the browser will contact the Experimentation and Configuration Service that contains the most up to date list of compatibility actions to perform. This list is saved locally after it is first retrieved so that subsequent requests will only update the list if the server's copy has changed.\n\nIf you enable this policy, the list of Domain Actions will continue to be downloaded from the Experimentation and Configuration Service.\n\nIf you disable this policy, the list of Domain Actions will no longer be downloaded from the Experimentation and Configuration Service.\n\nIf you don't configure this policy, the list of Domain Actions will continue to be downloaded from the Experimentation and Configuration Service.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enabledomainactionsdownload"
EnableOnlineRevocationChecks_Policy="Slå på OCSP/CRL-kontroller på nettet"
EnableOnlineRevocationChecks_Explain="Online revocation checks don't provide a significant security benefit and are disabled by default.\n\nIf you enable this policy, Microsoft Edge will perform soft-fail, online OCSP/CRL checks. "Soft fail" means that if the revocation server can't be reached, the certificate will be considered valid.\n\nIf you disable the policy or don't configure it, Microsoft Edge won't perform online revocation checks.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enableonlinerevocationchecks"
EnableSha1ForLocalAnchors_Policy="Allow certificates signed using SHA-1 when issued by local trust anchors (obsolete)"
EnableSha1ForLocalAnchors_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 91.\n\nWhen this setting is enabled, Microsoft Edge allows connections secured by SHA-1 signed certificates so long as the the certificate chains to a locally-installed root certificate and is otherwise valid.\n\nNote that this policy depends on the operating system (OS) certificate verification stack allowing SHA-1 signatures. If an OS update changes the OS handling of SHA-1 certificates, this policy might no longer have effect.  Further, this policy is intended as a temporary workaround to give enterprises more time to move away from SHA-1. This policy will be removed in Microsoft Edge 92 releasing in mid 2021.\n\nIf you don't set this policy or set it to false, or the SHA-1 certificate chains to a publicly trusted certificate root, then Microsoft Edge won't allow certificates signed by SHA-1.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enablesha1forlocalanchors"
EnhanceSecurityMode_Policy="Enhance the security state in Microsoft Edge"
EnhanceSecurityMode_Explain="This policy lets you enhance the security state in Microsoft Edge.\n\nIf you set this policy to 'StandardMode', the enhanced mode will be turned off and Microsoft Edge will fallback to its standard security mode.\n\nIf you set this policy to 'BalancedMode', the security state would be in balanced mode.\n\nIf you set this policy to 'StrictMode', the security state would be in strict mode.\n\nPolicy options mapping:\n\n* StandardMode (0) = Standard mode\n\n* BalancedMode (1) = Balanced mode\n\n* StrictMode (2) = Strict mode\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enhancesecuritymode"
EnhanceSecurityMode_Part="Enhance the security state in Microsoft Edge"
EnhanceSecurityMode_StandardMode_DropDown="Standard mode"
EnhanceSecurityMode_BalancedMode_DropDown="Balanced mode"
EnhanceSecurityMode_StrictMode_DropDown="Strict mode"
EnhanceSecurityModeBypassListDomains_Policy="Configure the list of domains for which enhance security mode will not be enforced"
EnhanceSecurityModeBypassListDomains_Explain="Configure the list of enhance security trusted domains. This means that\nenhance security mode will not be enforced when loading the sites in trusted domains.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enhancesecuritymodebypasslistdomains"
EnhanceSecurityModeBypassListDomains_Part="Configure the list of domains for which enhance security mode will not be enforced"
EnhanceSecurityModeEnforceListDomains_Policy="Configure the list of domains for which enhance security mode will always be enforced"
EnhanceSecurityModeEnforceListDomains_Explain="Configure the list of enhance security untrusted domains. This means that\nenhance security mode will always be enforced when loading the sites in untrusted domains.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enhancesecuritymodeenforcelistdomains"
EnhanceSecurityModeEnforceListDomains_Part="Configure the list of domains for which enhance security mode will always be enforced"
EnterpriseHardwarePlatformAPIEnabled_Policy="Allow managed extensions to use the Enterprise Hardware Platform API"
EnterpriseHardwarePlatformAPIEnabled_Explain="When this policy is set to enabled, extensions installed by enterprise policy are allowed to use the Enterprise Hardware Platform API.\nWhen this policy is set to disabled or isn't set, no extensions are allowed to use the Enterprise Hardware Platform API.\nThis policy also applies to component extensions.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enterprisehardwareplatformapienabled"
EnterpriseModeSiteListManagerAllowed_Policy="Allow access to the Enterprise Mode Site List Manager tool"
EnterpriseModeSiteListManagerAllowed_Explain="Allows you to set whether Enterprise Mode Site List Manager is available to users.\n\nIf you enable this policy, users can see the Enterprise Mode Site List Manager nav button on edge://compat page, navigate to the tool and use it.\n\nIf you disable or don't configure this policy, users won't see the Enterprise Mode Site List Manager nav button and won't be able to use it.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#enterprisemodesitelistmanagerallowed"
ExemptDomainFileTypePairsFromFileTypeDownloadWarnings_Policy="Disable download file type extension-based warnings for specified file types on domains"
ExemptDomainFileTypePairsFromFileTypeDownloadWarnings_Explain="You can enable this policy to create a dictionary of file type extensions with a corresponding list of domains that will be exempted from file type extension-based download warnings. This lets enterprise administrators block file type extension-based download warnings for files that are associated with a listed domain. For example, if  the "jnlp" extension is associated with "website1.com", users would not see a warning when downloading "jnlp" files from "website1.com", but see a download warning when downloading "jnlp" files from "website2.com".\n\nFiles with file type extensions specified for domains identified by this policy will still be subject to non-file type extension-based security warnings such as mixed-content download warnings and Microsoft Defender SmartScreen warnings.\n\nIf you disable this policy or don't configure it, file types that trigger extension-based download warnings will show warnings to the user.\n\nIf you enable this policy:\n\n* The URL pattern should be formatted according to https://go.microsoft.com/fwlink/?linkid=2095322.\n* The file type extension entered must be in lower-cased ASCII. The leading separator should not be included when listing the file type extension, so list "jnlp" should be used instead of ".jnlp".\n\nExample:\n\nThe following example value would prevent file type extension-based download warnings on swf, exe, and jnlp extensions for *.contoso.com domains. It will show the user a file type extension-based download warning on any other domain for exe and jnlp files, but not for swf files.\n\n[\n  { "file_extension": "jnlp", "domains": ["contoso.com"] },\n  { "file_extension": "exe", "domains": ["contoso.com"] },\n  { "file_extension": "swf", "domains": ["*"] }\n]\n\nNote that while the preceding example shows the suppression of file type extension-based download warnings for "swf" files for all domains, applying suppression of such warnings for all domains for any dangerous file type extension is not recommended due to security concerns. It is shown in the example merely to demonstrate the ability to do so.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#exemptdomainfiletypepairsfromfiletypedownloadwarnings"
ExemptDomainFileTypePairsFromFileTypeDownloadWarnings_Part="Disable download file type extension-based warnings for specified file types on domains"
ExperimentationAndConfigurationServiceControl_Policy="Control communication with the Experimentation and Configuration Service"
ExperimentationAndConfigurationServiceControl_Explain="The Experimentation and Configuration Service is used to deploy Experimentation and Configuration payloads to the client.\n\nExperimentation payload consists of a list of early in development features that Microsoft is enabling for testing and feedback.\n\nConfiguration payload consists of a list of recommended settings that Microsoft wants to deploy to optimize the user experience.\n\nConfiguration payload may also contain a list of actions to take on certain domains for compatibility reasons. For example, the browser may override the User Agent string on a website if that website is broken. Each of these actions is intended to be temporary while Microsoft tries to resolve the issue with the site owner.\n\nIf you set this policy to 'FullMode', the full payload is downloaded from the Experimentation and Configuration Service. This includes both the experimentation and configuration payloads.\n\nIf you set this policy to 'ConfigurationsOnlyMode', only the configuration payload is downloaded.\n\nIf you set this policy to 'RestrictedMode', the communication with the Experimentation and Configuration Service is stopped completely. Microsoft does not recommend this setting.\n\nIf you don't configure this policy on a managed device, the behavior on Beta and Stable channels is the same as the 'ConfigurationsOnlyMode'. On Canary and Dev channels the behavior is the same as 'FullMode'.\n\nIf you don't configure this policy on an unmanaged device, the behavior is the same as the 'FullMode'.\n\nPolicy options mapping:\n\n* FullMode (2) = Retrieve configurations and experiments\n\n* ConfigurationsOnlyMode (1) = Retrieve configurations only\n\n* RestrictedMode (0) = Disable communication with the Experimentation and Configuration Service\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#experimentationandconfigurationservicecontrol"
ExperimentationAndConfigurationServiceControl_Part="Control communication with the Experimentation and Configuration Service"
ExperimentationAndConfigurationServiceControl_FullMode_DropDown="Retrieve configurations and experiments"
ExperimentationAndConfigurationServiceControl_ConfigurationsOnlyMode_DropDown="Retrieve configurations only"
ExperimentationAndConfigurationServiceControl_RestrictedMode_DropDown="Disable communication with the Experimentation and Configuration Service"
ExplicitlyAllowedNetworkPorts_Policy="Explicitly allowed network ports"
ExplicitlyAllowedNetworkPorts_Explain="There is a list of restricted ports built into Microsoft Edge. Connections to these ports will fail. This policy allows bypassing that list. The set of ports is defined as a comma-separated list that outgoing connections should be permitted on.\n\nPorts are restricted to prevent Microsoft Edge from being used as a vector to exploit various network vulnerabilities. Setting this policy may expose your network to attacks. This policy is intended as a temporary workaround for error code "ERR_UNSAFE_PORT" while migrating a service running on a blocked port to a standard port (for example port 80 or 443).\n\nMalicious websites can easily detect that this policy is set, and for which ports, then use that information to target attacks.\n\nEach port listed in this policy is labeled with a date that it can be unblocked until. After that date the port will be restricted regardless of if it's specified by the value of this policy.\n\nLeaving the value empty or unset means that all restricted ports will be blocked. Invalid port values set through this policy will be ignored while valid ones will still be applied.\n\nThis policy overrides the "--explicitly-allowed-ports" command-line option.\n\nPolicy options mapping:\n\n* 554 (554) = port 554 (can be unblocked until 2021/10/15)\n\n* 10080 (10080) = port 10080 (can be unblocked until 2022/04/01)\n\n* 6566 (6566) = port 6566 (can be unblocked until 2021/10/15)\n\n* 989 (989) = port 989 (can be unblocked until 2022/02/01)\n\n* 990 (990) = port 990 (can be unblocked until 2022/02/01)\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#explicitlyallowednetworkports"
ExplicitlyAllowedNetworkPorts_Part="Explicitly allowed network ports"
ExternalProtocolDialogShowAlwaysOpenCheckbox_Policy="Show an "Always open" checkbox in external protocol dialog"
ExternalProtocolDialogShowAlwaysOpenCheckbox_Explain="This policy controls whether the "Always allow this site to open links of this type" checkbox is shown on external protocol launch confirmation prompts. This policy only applies to https:// links.\n\nIf you enable this policy, when an external protocol confirmation prompt is shown, the user can select "Always allow" to skip all future confirmation prompts for the protocol on this site.\n\nIf you disable this policy, the "Always allow" checkbox isn't displayed. The user will be prompted for confirmation every time an external protocol is invoked.\n\nPrior to Microsoft Edge 83, if you don't configure this policy, the "Always allow" checkbox isn't displayed. The user will be prompted for confirmation every time an external protocol is invoked.\n\nOn Microsoft Edge 83, if you don't configure this policy, the checkbox visibility is controlled by the "Enable remembering protocol launch prompting preferences" flag in edge://flags\n\nAs of Microsoft Edge 84, if you don't configure this policy, when an external protocol confirmation prompt is shown, the user can select "Always allow" to skip all future confirmation prompts for the protocol on this site.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#externalprotocoldialogshowalwaysopencheckbox"
FamilySafetySettingsEnabled_Policy="Allow users to configure Family safety and Kids Mode"
FamilySafetySettingsEnabled_Explain="This policy disables two family safety related features in the browser. This will hide the Family page inside Settings and navigation to edge://settings/family will be blocked. The family settings page describes what features are available with family groups with Microsoft Family Safety. Learn more about Family Safety here: (https://go.microsoft.com/fwlink/?linkid=2098432). Starting in Microsoft Edge 90, this policy also disables Kids Mode, a kid friendly browsing mode with custom themes and allow list browsing that requires the device password to exit. Learn more about Kids Mode here: (https://go.microsoft.com/fwlink/?linkid=2146910)\n\nIf you enable this policy or don't configure it, the family page in Settings will be shown and Kids Mode will be available.\n\nIf you disable this policy, the family page will not be shown, and Kids Mode will be hidden.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#familysafetysettingsenabled"
FetchKeepaliveDurationSecondsOnShutdown_Policy="Fetch keepalive duration on shutdown"
FetchKeepaliveDurationSecondsOnShutdown_Explain="Controls the duration (in seconds) that keepalive requests are allowed to prevent the browser from completing its shutdown.\n\nIf you configure this policy, the browser will block completing shutdown while it processes any outstanding keepalive requests (see https://fetch.spec.whatwg.org/#request-keepalive-flag) up to the maximum period of time specified by this policy.\n\nIf you disable or don't configure this policy, the default value of 0 seconds is used and outstanding keepalive requests will be immediately cancelled during browser shutdown.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#fetchkeepalivedurationsecondsonshutdown"
FetchKeepaliveDurationSecondsOnShutdown_Part="Fetch keepalive duration on shutdown"
ForceBingSafeSearch_Policy="Enforce Bing SafeSearch"
ForceBingSafeSearch_Explain="Ensure that queries in Bing web search are done with SafeSearch set to the value specified. Users can't change this setting.\n\nIf you configure this policy to 'BingSafeSearchNoRestrictionsMode', SafeSearch in Bing search falls back to the bing.com value.\n\nIf you configure this policy to 'BingSafeSearchModerateMode', the moderate setting is used in SafeSearch. The moderate setting filters adult videos and images but not text from search results.\n\nIf you configure this policy to 'BingSafeSearchStrictMode', the strict setting in SafeSearch is used. The strict setting filters adult text, images, and videos.\n\nIf you disable this policy or don't configure it, SafeSearch in Bing search isn't enforced, and users can set the value they want on bing.com.\n\nPolicy options mapping:\n\n* BingSafeSearchNoRestrictionsMode (0) = Don't configure search restrictions in Bing\n\n* BingSafeSearchModerateMode (1) = Configure moderate search restrictions in Bing\n\n* BingSafeSearchStrictMode (2) = Configure strict search restrictions in Bing\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#forcebingsafesearch"
ForceBingSafeSearch_Part="Enforce Bing SafeSearch"
ForceBingSafeSearch_BingSafeSearchNoRestrictionsMode_DropDown="Don't configure search restrictions in Bing"
ForceBingSafeSearch_BingSafeSearchModerateMode_DropDown="Configure moderate search restrictions in Bing"
ForceBingSafeSearch_BingSafeSearchStrictMode_DropDown="Configure strict search restrictions in Bing"
ForceCertificatePromptsOnMultipleMatches_Policy="Configure whether Microsoft Edge should automatically select a certificate when there are multiple certificate matches for a site configured with "AutoSelectCertificateForUrls" (deprecated)"
ForceCertificatePromptsOnMultipleMatches_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nThis policy is deprecated because we are moving to a new policy. It won't work in Microsoft Edge version 104. The new policy to use is 'PromptOnMultipleMatchingCertificates' (Prompt the user to select a certificate when multiple certificates match).\n\nToggles whether users are prompted to select a certificate if there are multiple certificates available and a site is configured with 'AutoSelectCertificateForUrls' (Automatisk valg av klientsertifikater for disse nettstedene). If you don't configure 'AutoSelectCertificateForUrls' for a site, the user will always be prompted to select a certificate.\n\nIf you set this policy to True, Microsoft Edge will prompt a user to select a certificate for sites on the list defined in 'AutoSelectCertificateForUrls' if and only if there is more than one certificate.\n\nIf you set this policy to False or don't configure it, Microsoft Edge will automatically select a certificate even if there are multiple matches for a certificate. The user will not be prompted to select a certificate for sites on the list defined in 'AutoSelectCertificateForUrls'.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#forcecertificatepromptsonmultiplematches"
ForceEphemeralProfiles_Policy="Enable use of ephemeral profiles"
ForceEphemeralProfiles_Explain="Controls whether user profiles are switched to ephemeral mode. An ephemeral profile is created when a session begins, is deleted when the session ends, and is associated with the user's original profile.\n\nIf you enable this policy, profiles run in ephemeral mode. This lets users work from their own devices without saving browsing data to those devices. If you enable this policy as an OS policy (by using GPO on Windows, for example), it applies to every profile on the system.\n\nIf you disable this policy or don't configure it, users get their regular profiles when they sign in to the browser.\n\nIn ephemeral mode, profile data is saved on disk only for the length of the user session. Features like browser history, extensions and their data, web data like cookies, and web databases aren't saved after the browser is closed. This doesn't prevent a user from manually downloading any data to disk, or from saving pages or printing them. If the user has enabled sync, all data is preserved in their sync accounts just like with regular profiles. Users can also use InPrivate browsing in ephemeral mode unless you explicitly disable this.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#forceephemeralprofiles"
ForceGoogleSafeSearch_Policy="Enforce Google SafeSearch"
ForceGoogleSafeSearch_Explain="Forces queries in Google Web Search to be performed with SafeSearch set to active, and prevents users from changing this setting.\n\nIf you enable this policy, SafeSearch in Google Search is always active.\n\nIf you disable this policy or don't configure it, SafeSearch in Google Search isn't enforced.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#forcegooglesafesearch"
ForceLegacyDefaultReferrerPolicy_Policy="Use a default referrer policy of no-referrer-when-downgrade (obsolete)"
ForceLegacyDefaultReferrerPolicy_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 88.\n\nThis policy doesn't work because it was only intended to be a short-term mechanism to give enterprises more time to update their web content if it was found to be incompatible with the new default referrer policy.\n\nMicrosoft Edge's default referrer policy was strengthened from the value of no-referrer-when-downgrade to the more secure strict-origin-when-cross-origin.\n\nWhen this enterprise policy is enabled, Microsoft Edge's default referrer policy will be set to its old value of no-referrer-when-downgrade.\n\nThis enterprise policy is disabled by default.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#forcelegacydefaultreferrerpolicy"
ForceMajorVersionToMinorPositionInUserAgent_Policy="Enable or disable freezing the User-Agent string at major version 99"
ForceMajorVersionToMinorPositionInUserAgent_Explain="This policy controls whether the User-Agent string major\nversion should be frozen at 99.\n\nThe User-Agent request header lets websites identify the application,\noperating system, vendor, and/or version of the requesting user agent.\nSome websites make assumptions about how this header is formatted and may\nencounter issues with version strings that include three digits in the\nmajor position (for example, 100.0.0.0).\n\nSetting the policy to 'Default' or leaving it unset will default to\nbrowser settings for the User-Agent string major version.\nIf set to 'ForceEnabled', the User-Agent string will always report the\nmajor version as 99 and include the browser's major version in the minor\nposition. For example, browser version 101.0.0.0 would send a User-Agent\nrequest header that reports version 99.101.0.0.\nIf set to 'ForceDisabled', the User-Agent string will not freeze the\nmajor version.\n\nThis policy is temporary and will be deprecated in the future. Note that\nif this policy and\nUser-Agent Reduction are\nboth enabled, the User-Agent version string will always be 99.0.0.0.\n\nPolicy options mapping:\n\n* Default (0) = Default to browser settings for User-Agent string version.\n\n* ForceDisabled (1) = The User-Agent string will not freeze the major version.\n\n* ForceEnabled (2) = The User-Agent string will freeze the major version as 99 and include the browser's major version in the minor position.\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#forcemajorversiontominorpositioninuseragent"
ForceMajorVersionToMinorPositionInUserAgent_Part="Enable or disable freezing the User-Agent string at major version 99"
ForceMajorVersionToMinorPositionInUserAgent_Default_DropDown="Default to browser settings for User-Agent string version."
ForceMajorVersionToMinorPositionInUserAgent_ForceDisabled_DropDown="The User-Agent string will not freeze the major version."
ForceMajorVersionToMinorPositionInUserAgent_ForceEnabled_DropDown="The User-Agent string will freeze the major version as 99 and include the browser's major version in the minor position."
ForceNetworkInProcess_Policy="Tving nettverkskode til å kjøre i nettleserprosessen (obsolete)"
ForceNetworkInProcess_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 83.\n\nThis policy doesn't work because it was only intended to be a short-term mechanism to give enterprises more time to migrate to 3rd party software that doesn't depend on hooking networking APIs. Proxy servers are recommended over LSPs and Win32 API patching.\n\nThis policy forces networking code to run in the browser process.\n\nThis policy is disabled by default. If enabled, users are open to security issues when the networking process is sandboxed.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#forcenetworkinprocess"
ForceSync_Policy="Force synchronization of browser data and do not show the sync consent prompt"
ForceSync_Explain="Forces data synchronization in Microsoft Edge. This policy also prevents the user from turning sync off.\n\nIf you don't configure this policy, users will be able to turn sync on or off. If you enable this policy, users will not be able to turn sync off.\n\nFor this policy to work as intended,\n'BrowserSignin' (Browser sign-in settings) policy must not be configured, or must be set to enabled. If 'BrowserSignin' is set to disabled, then 'ForceSync' (Force synchronization of browser data and do not show the sync consent prompt) will not take affect.\n\n'SyncDisabled' (Disable synchronization of data using Microsoft sync services) must not be configured or must be set to False. If this is set to True, 'ForceSync' will not take affect. If you wish to ensure specific datatypes sync or do not sync, use the 'ForceSyncTypes' (Configure the list of types that are included for synchronization) policy and 'SyncTypesListDisabled' (Configure the list of types that are excluded from synchronization) policy.\n\n0 = Do not automatically start sync and show the sync consent (default)\n1 = Force sync to be turned on for Azure AD/Azure AD-Degraded user profile and do not show the sync consent prompt\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#forcesync"
ForceSyncTypes_Policy="Configure the list of types that are included for synchronization"
ForceSyncTypes_Explain="If you enable this policy all the specified data types will be included for synchronization for Azure AD/Azure AD-Degraded user profiles. This policy can be used to ensure the type of data uploaded to the Microsoft Edge synchronization service.\n\nYou can provide one of the following data types for this policy: "favorites", "settings", "passwords", "addressesAndMore", "extensions", "history", "openTabs", and "collections". The "apps" data type will be supported starting in Microsoft Edge version 100. Note that these data type names are case sensitive.\n\nUsers will not be able to override the enabled data types.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#forcesynctypes"
ForceSyncTypes_Part="Configure the list of types that are included for synchronization"
ForceYouTubeRestrict_Policy="Fremtvinger bruk av et minimumsnivå for Begrenset innhold-modusen på YouTube"
ForceYouTubeRestrict_Explain="Enforces a minimum Restricted Mode on YouTube and prevents users from picking a less restricted mode.\n\nSet to 'Strict' to enforce Strict Restricted Mode on YouTube.\n\nSet to 'Moderate' to enforce the user to only use Moderate Restricted Mode and Strict Restricted Mode on YouTube. They can't disable Restricted Mode.\n\nSet to 'Off' or don't configure this policy to not enforce Restricted Mode on YouTube. External policies such as YouTube policies might still enforce Restricted Mode.\n\nPolicy options mapping:\n\n* Off (0) = Fremtvinger ikke bruk av Begrenset innhold-modusen på YouTube\n\n* Moderate (1) = Fremtving bruk av minst moderat nivå for Begrenset innhold-modus på YouTube\n\n* Strict (2) = Fremtvinger bruk av strengt nivå for Begrenset innhold-modus på YouTube\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#forceyoutuberestrict"
ForceYouTubeRestrict_Part="Fremtvinger bruk av et minimumsnivå for Begrenset innhold-modusen på YouTube"
ForceYouTubeRestrict_Off_DropDown="Fremtvinger ikke bruk av Begrenset innhold-modusen på YouTube"
ForceYouTubeRestrict_Moderate_DropDown="Fremtving bruk av minst moderat nivå for Begrenset innhold-modus på YouTube"
ForceYouTubeRestrict_Strict_DropDown="Fremtvinger bruk av strengt nivå for Begrenset innhold-modus på YouTube"
FullscreenAllowed_Policy="Allow full screen mode"
FullscreenAllowed_Explain="Set the availability of full screen mode - all Microsoft Edge UI is hidden and only web content is visible.\n\nIf you enable this policy or don't configure it, the user, apps, and extensions with appropriate permissions can enter full screen mode.\n\nIf you disable this policy, users, apps, and extensions can't enter full screen mode.\n\nOpening Microsoft Edge in kiosk mode using the command line is unavailable when full screen mode is disabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#fullscreenallowed"
GloballyScopeHTTPAuthCacheEnabled_Policy="Enable globally scoped HTTP auth cache"
GloballyScopeHTTPAuthCacheEnabled_Explain="This policy configures a single global per profile cache with HTTP server authentication credentials.\n\nIf you disable or don't set this policy, the browser will use the default behavior of cross-site auth, which as of version 80, will be to scope HTTP server authentication credentials by top-level site. So, if two sites use resources from the same authenticating domain, credentials will need to be provided independently in the context of both sites. Cached proxy credentials will be reused across sites.\n\nIf you enable this policy HTTP auth credentials entered in the context of one site will automatically be used in the context of another site.\n\nEnabling this policy leaves sites open to some types of cross-site attacks, and allows users to be tracked across sites even without cookies by adding entries to the HTTP auth cache using credentials embedded in URLs.\n\nThis policy is intended to give enterprises depending on the legacy behavior a chance to update their login procedures and will be removed in the future.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#globallyscopehttpauthcacheenabled"
GoToIntranetSiteForSingleWordEntryInAddressBar_Policy="Force direct intranet site navigation instead of searching on single word entries in the Address Bar"
GoToIntranetSiteForSingleWordEntryInAddressBar_Explain="If you enable this policy, the top auto-suggest result in the address bar suggestion list will navigate to intranet sites if the text entered in the address bar is a single word without punctuation.\n\nDefault navigation when typing a single word without punctuation will conduct a navigation to an intranet site matching the entered text.\n\nIf you enable this policy, the second auto-suggest result in the address bar suggestion list will conduct a web search exactly as it was entered, provided that this text is a single word without punctuation. The default search provider will be used unless a policy to prevent web search is also enabled.\n\nTwo effects of enabling this policy are:\n\nNavigation to sites in response to single word queries that would typically resolve to a history item will no longer happen. Instead, the browser will attempt navigate to internal sites that may not exist in an organization's intranet. This will result in a 404 error.\n\nPopular, single-word search terms will require manual selection of search suggestions to properly conduct a search.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#gotointranetsiteforsinglewordentryinaddressbar"
HSTSPolicyBypassList_Policy="Configure the list of names that will bypass the HSTS policy check"
HSTSPolicyBypassList_Explain="Setting the policy specifies a list of hostnames that bypass preloaded HSTS upgrades from http to https.\n\nOnly single-label hostnames are allowed in this policy, and this policy only applies to static HSTS-preloaded entries (for example, "app", "new", "search", "play"). This policy does not prevent HSTS upgrades for servers that have dynamically requested HSTS upgrades using a Strict-Transport-Security response header.\n\nSupplied hostnames must be canonicalized: Any IDNs must be converted to their A-label format, and all ASCII letters must be lowercase. This policy only applies to the specific single-label hostnames specified, not to subdomains of those names.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#hstspolicybypasslist"
HSTSPolicyBypassList_Part="Configure the list of names that will bypass the HSTS policy check"
HardwareAccelerationModeEnabled_Policy="Bruk maskinvareakselerasjon når det er tilgjengelig"
HardwareAccelerationModeEnabled_Explain="Specifies whether to use hardware acceleration if it's available. If you enable this policy or don't configure it, hardware acceleration is enabled unless a GPU feature is explicitly blocked.\n\nIf you disable this policy, hardware acceleration is disabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#hardwareaccelerationmodeenabled"
HeadlessModeEnabled_Policy="Control use of the Headless Mode"
HeadlessModeEnabled_Explain="This policy setting lets you decide whether users can launch Microsoft Edge in headless mode.\n\nIf you enable or don't configure this policy, Microsoft Edge allows use of the headless mode.\n\nIf you disable this policy, Microsoft Edge denies use of the headless mode.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#headlessmodeenabled"
HideFirstRunExperience_Policy="Hide the First-run experience and splash screen"
HideFirstRunExperience_Explain="If you enable this policy, the First-run experience and the splash screen will not be shown to users when they run Microsoft Edge for the first time.\n\nFor the configuration options shown in the First Run Experience, the browser will default to the following:\n\n-On the New Tab Page, the feed type will be set to MSN News and the layout to Inspirational.\n\n-The user will still be automatically signed into Microsoft Edge if the Windows account is of Azure AD or MSA type.\n\n-Sync will not be enabled by default and users will be prompted to choose whether they'd like to sync on browser startup. You can use the 'ForceSync' (Force synchronization of browser data and do not show the sync consent prompt) or the 'SyncDisabled' (Disable synchronization of data using Microsoft sync services) policy to configure sync and the sync consent prompt.\n\nIf you disable or don't configure this policy, the First-run experience and the Splash screen will be shown.\n\nNote: The specific configuration options shown to the user in the First Run Experience, can also be managed by using other specific policies. You can use the HideFirstRunExperience policy in combination with these policies to configure a specific browser experience on your managed devices. Some of these other policies are:\n\n-'AutoImportAtFirstRun' (Automatically import another browser's data and settings at first run)\n\n-'NewTabPageLocation' (Configure the new tab page URL)\n\n-'NewTabPageSetFeedType' (Configure the Microsoft Edge new tab page experience)\n\n-'ForceSync'\n\n-'SyncDisabled'\n\n-'BrowserSignin' (Browser sign-in settings)\n\n-'NonRemovableProfileEnabled' (Configure whether a user always has a default profile automatically signed in with their work or school account)\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#hidefirstrunexperience"
HideInternetExplorerRedirectUXForIncompatibleSitesEnabled_Policy="Hide the one-time redirection dialog and the banner on Microsoft Edge"
HideInternetExplorerRedirectUXForIncompatibleSitesEnabled_Explain="This policy gives an option to disable one-time redirection dialog and the banner. When this policy is enabled, users will not see both the one-time dialog and the banner.\nUsers will continue to be redirected to Microsoft Edge when they encounter an incompatible website on Internet Explorer, but their browsing data will not be imported.\n\n- If you enable this policy the one-time redirection dialog and banner will never be shown to users. Users' browsing data will not be imported when a redirection happens.\n\n- If you disable or don't set this policy, the redirection dialog will be shown on the first redirection and the persistent redirection banner will be shown to users on sessions that begin with a redirection. Users' browsing data will be imported every time user encounters such redirection (ONLY IF user consents to it on the one-time dialog).\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#hideinternetexplorerredirectuxforincompatiblesitesenabled"
HideRestoreDialogEnabled_Policy="Hide restore pages dialog after browser crash"
HideRestoreDialogEnabled_Explain="This policy gives an option to hide the "Restore pages" dialog after Microsoft Edge has crashed. The "Restore pages" dialog gives users the option to restore the pages that were previously open before Microsoft Edge crashed.\n\nIf you enable this policy, the "Restore pages" dialog will not be shown.\n\nIf you disable or don't set this policy, the "Restore pages" dialog will be shown.\n\nIf you set this policy, do not set the 'ClearBrowsingDataOnExit' (Clear browsing data when Microsoft Edge closes) or 'SavingBrowserHistoryDisabled' (Deaktiver lagring av nettleserlogg) policy since that prevents history from being saved which also disables the dialog.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#hiderestoredialogenabled"
HubsSidebarEnabled_Policy="Show Hubs Sidebar"
HubsSidebarEnabled_Explain="Shows a launcher bar on the right side of Microsoft Edge's screen.\n\nEnable this policy to always show the Sidebar.\nDisable this policy to never show the Sidebar.\n\nIf you don't configure the policy, users can choose whether to show the Sidebar.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#hubssidebarenabled"
ImportAutofillFormData_Policy="Allow importing of autofill form data"
ImportAutofillFormData_Explain="Allows users to import autofill form data from another browser into Microsoft Edge.\n\nIf you enable this policy, the option to manually import autofill data is automatically selected.\n\nIf you disable this policy, autofill form data isn't imported at first run, and users can't import it manually.\n\nIf you don't configure this policy, autofill data is imported at first run, and users can choose whether to import this data manually during later browsing sessions.\n\nYou can set this policy as a recommendation. This means that Microsoft Edge will import autofill data on first run, but users can select or clear **autofill data** option during manual import.\n\n**Note**: This policy currently manages importing from Google Chrome (on Windows 7, 8, and 10 and on macOS) and Mozilla Firefox (on Windows 7, 8, and 10 and on macOS) browsers.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importautofillformdata"
ImportFavorites_Policy="Allow importing of favorites"
ImportFavorites_Explain="Allows users to import favorites from another browser into Microsoft Edge.\n\nIf you enable this policy, the **Favorites** check box is automatically selected in the **Import browser data** dialog box.\n\nIf you disable this policy, favorites aren't imported at first run, and users can't import them manually.\n\nIf you don't configure this policy, favorites are imported at first run, and users can choose whether to import them manually during later browsing sessions.\n\nYou can also set this policy as a recommendation. This means that Microsoft Edge imports favorites on first run, but users can select or clear the **favorites** option during manual import.\n\n**Note**: This policy currently manages importing from Internet Explorer (on Windows 7, 8, and 10), Google Chrome (on Windows 7, 8, and 10 and on macOS), Mozilla Firefox (on Windows 7, 8, and 10 and on macOS), and Apple Safari (on macOS) browsers.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importfavorites"
ImportBrowserSettings_Policy="Allow importing of browser settings"
ImportBrowserSettings_Explain="Allows users to import browser settings from another browser into Microsoft Edge.\n\nIf you enable this policy, the **Browser settings** check box is automatically selected in the **Import browser data** dialog box.\n\nIf you disable this policy, browser settings aren't imported at first run, and users can't import them manually.\n\nIf you don't configure this policy, browser settings are imported at first run, and users can choose whether to import them manually during later browsing sessions.\n\nYou can also set this policy as a recommendation. This means that Microsoft Edge imports the settings on first run, but users can select or clear the **browser settings** option during manual import.\n\n**Note**: This policy currently manages importing Google Chrome (on Windows 7, 8, and 10 and on macOS).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importbrowsersettings"
ImportCookies_Policy="Allow importing of Cookies"
ImportCookies_Explain="Allows users to import Cookies from another browser into Microsoft Edge.\n\nIf you disable this policy, Cookies aren't imported on first run.\n\nIf you don't configure this policy, Cookies are imported on first run.\n\nYou can also set this policy as a recommendation. This means that Microsoft Edge imports Cookies on first run.\n\n**Note**: This policy currently manages importing Google Chrome (on Windows 7, 8, and 10 and on macOS).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importcookies"
ImportExtensions_Policy="Allow importing of extensions"
ImportExtensions_Explain="Allows users to import extensions from another browser into Microsoft Edge.\n\nIf you enable this policy, the **Extensions** check box is automatically selected in the **Import browser data** dialog box.\n\nIf you disable this policy, extensions aren't imported at first run, and users can't import them manually.\n\nIf you don't configure this policy, extensions are imported at first run, and users can choose whether to import them manually during later browsing sessions.\n\nYou can also set this policy as a recommendation. This means that Microsoft Edge imports extensions on first run, but users can select or clear the **extensions** option during manual import.\n\n**Note**: This policy currently only supports importing from Google Chrome (on Windows 7, 8, and 10 and on macOS).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importextensions"
ImportHistory_Policy="Allow importing of browsing history"
ImportHistory_Explain="Allows users to import their browsing history from another browser into Microsoft Edge.\n\nIf you enable this policy, the **Browsing history** check box is automatically selected in the **Import browser data** dialog box.\n\nIf you disable this policy, browsing history data isn't imported at first run, and users can't import this data manually.\n\nIf you don't configure this policy, browsing history data is imported at first run, and users can choose whether to import it manually during later browsing sessions.\n\nYou can also set this policy as a recommendation. This means that Microsoft Edge imports browsing history on first run, but users can select or clear the **history** option during manual import.\n\n**Note**: This policy currently manages importing from Internet Explorer (on Windows 7, 8, and 10), Google Chrome (on Windows 7, 8, and 10 and on macOS), Mozilla Firefox (on Windows 7, 8, and 10 and on macOS), and Apple Safari (macOS) browsers.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importhistory"
ImportHomepage_Policy="Allow importing of home page settings"
ImportHomepage_Explain="Allows users to import their home page setting from another browser into Microsoft Edge.\n\nIf you enable this policy, the option to manually import the home page setting is automatically selected.\n\nIf you disable this policy, the home page setting isn't imported at first run, and users can't import it manually.\n\nIf you don't configure this policy, the home page setting is imported at first run, and users can choose whether to import this data manually during later browsing sessions.\n\nYou can set this policy as a recommendation. This means that Microsoft Edge imports the home page setting on first run, but users can select or clear the **home page** option during manual import.\n\n**Note**: This policy currently manages importing from Internet Explorer (on Windows 7, 8, and 10).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importhomepage"
ImportOpenTabs_Policy="Allow importing of open tabs"
ImportOpenTabs_Explain="Allows users to import open and pinned tabs from another browser into Microsoft Edge.\n\nIf you enable this policy, the **Open tabs** check box is automatically selected in the **Import browser data** dialog box.\n\nIf you disable this policy, open tabs aren't imported at first run, and users can't import them manually.\n\nIf you don't configure this policy, open tabs are imported at first run, and users can choose whether to import them manually during later browsing sessions.\n\nYou can also set this policy as a recommendation. This means that Microsoft Edge imports open tabs on first run, but users can select or clear the **Open tabs** option during manual import.\n\n**Note**: This policy currently only supports importing from Google Chrome (on Windows 7, 8, and 10 and on macOS).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importopentabs"
ImportPaymentInfo_Policy="Allow importing of payment info"
ImportPaymentInfo_Explain="Allows users to import payment info from another browser into Microsoft Edge.\n\nIf you enable this policy, the **payment info** check box is automatically selected in the **Import browser data** dialog box.\n\nIf you disable this policy, payment info isn't imported at first run, and users can't import it manually.\n\nIf you don't configure this policy, payment info is imported at first run, and users can choose whether to import it manually during later browsing sessions.\n\nYou can also set this policy as a recommendation. This means that Microsoft Edge imports payment info on first run, but users can select or clear the **payment info** option during manual import.\n\n**Note:** This policy currently manages importing from Google Chrome (on Windows 7, 8, and 10 and on macOS).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importpaymentinfo"
ImportSavedPasswords_Policy="Allow importing of saved passwords"
ImportSavedPasswords_Explain="Allows users to import saved passwords from another browser into Microsoft Edge.\n\nIf you enable this policy, the option to manually import saved passwords is automatically selected.\n\nIf you disable this policy, saved passwords aren't imported on first run, and users can't import them manually.\n\nIf you don't configure this policy, passwords are imported at first run, and users can choose whether to import them manually during later browsing sessions.\n\nYou can set this policy as a recommendation. This means that Microsoft Edge imports passwords on first run, but users can select or clear the **passwords** option during manual import.\n\n**Note**: This policy currently manages importing from Internet Explorer (on Windows 7, 8, and 10), Google Chrome (on Windows 7, 8, and 10 and on macOS), and Mozilla Firefox (on Windows 7, 8, and 10 and on macOS) browsers.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importsavedpasswords"
ImportSearchEngine_Policy="Allow importing of search engine settings"
ImportSearchEngine_Explain="Allows users to import search engine settings from another browser into Microsoft Edge.\n\nIf you enable, this policy, the option to import search engine settings is automatically selected.\n\nIf you disable this policy, search engine settings aren't imported at first run, and users can't import them manually.\n\nIf you don't configure this policy, search engine settings are imported at first run, and users can choose whether to import this data manually during later browsing sessions.\n\nYou can set this policy as a recommendation. This means that Microsoft Edge imports search engine settings on first run, but users can select or clear the **search engine** option during manual import.\n\n**Note**: This policy currently manages importing from Internet Explorer (on Windows 7, 8, and 10).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importsearchengine"
ImportShortcuts_Policy="Allow importing of shortcuts"
ImportShortcuts_Explain="Allows users to import Shortcuts from another browser into Microsoft Edge.\n\nIf you disable this policy, Shortcuts aren't imported on first run.\n\nIf you don't configure this policy, Shortcuts are imported on first run.\n\nYou can also set this policy as a recommendation. This means that Microsoft Edge imports Shortcuts on first run.\n\n**Note**: This policy currently manages importing from Google Chrome (on Windows 7, 8, and 10 and on macOS).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importshortcuts"
ImportStartupPageSettings_Policy="Allow importing of startup page settings"
ImportStartupPageSettings_Explain="Allows users to import Startup settings from another browser into Microsoft Edge.\n\nIf you enable this policy, the Startup settings are always imported.\n\nIf you disable this policy, startup settings are not imported at first run or at manual import.\n\nIf you don't configure this policy, startup settings are imported at first run, and users can choose whether to import this data manually by selecting browser settings option during later browsing sessions.\n\nYou can set this policy as a recommendation. This means that Microsoft Edge will import startup settings on first run, but users can select or clear **browser settings** option during manual import.\n\n**Note**: This policy currently manages importing from Microsoft Edge Legacy and Google Chrome (on Windows 7, 8, and 10) browsers.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#importstartuppagesettings"
InAppSupportEnabled_Policy="In-app support Enabled"
InAppSupportEnabled_Explain="Microsoft Edge uses the in-app support feature (enabled by default) to allow users to contact our support agents directly from the browser. Also, by default, users can't disable (turn off) the in-app support feature.\n\nIf you enable this policy or don't configure it, users can invoke in-app support.\n\nIf you disable this policy, users can't invoke in-app support.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#inappsupportenabled"
InPrivateModeAvailability_Policy="Configure InPrivate mode availability"
InPrivateModeAvailability_Explain="Specifies whether the user can open pages in InPrivate mode in Microsoft Edge.\n\nIf you don't configure this policy or set it to 'Enabled', users can open pages in InPrivate mode.\n\nSet this policy to 'Disabled' to stop users from using InPrivate mode.\n\nSet this policy to 'Forced' to always use InPrivate mode.\n\nPolicy options mapping:\n\n* Enabled (0) = InPrivate mode available\n\n* Disabled (1) = InPrivate mode disabled\n\n* Forced (2) = InPrivate mode forced\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#inprivatemodeavailability"
InPrivateModeAvailability_Part="Configure InPrivate mode availability"
IncognitoModeAvailability_Enabled_DropDown="InPrivate mode available"
IncognitoModeAvailability_Disabled_DropDown="InPrivate mode disabled"
IncognitoModeAvailability_Forced_DropDown="InPrivate mode forced"
InsecureFormsWarningsEnabled_Policy="Enable warnings for insecure forms"
InsecureFormsWarningsEnabled_Explain="This policy controls the handling of insecure forms (forms submitted over HTTP) embedded in secure (HTTPS) sites in the browser.\nIf you enable this policy or don't set it, a full page warning will be shown when an insecure form is submitted. Additionally, a warning bubble will be shown next to the form fields when they are focused, and autofill will be disabled for those forms.\nIf you disable this policy, warnings will not be shown for insecure forms, and autofill will work normally.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#insecureformswarningsenabled"
IntensiveWakeUpThrottlingEnabled_Policy="Control the IntensiveWakeUpThrottling feature"
IntensiveWakeUpThrottlingEnabled_Explain="When enabled the IntensiveWakeUpThrottling feature causes Javascript timers in background tabs to be aggressively throttled and coalesced, running no more than once per minute after a page has been backgrounded for 5 minutes or more.\n\nThis is a web standards compliant feature, but it may break functionality on some websites by causing certain actions to be delayed by up to a minute. However, it results in significant CPU and battery savings when enabled. See https://bit.ly/30b1XR4 for more details.\n\nIf you enable this policy, the feature will be force enabled, and users will not be able to override this setting.\nIf you disable this policy, the feature will be force disabled, and users will not be able to override this setting.\nIf you don't configure this policy, the feature will be controlled by its own internal logic. Users can manually configure this setting.\n\nNote that the policy is applied per renderer process, with the most recent value of the policy setting in force when a renderer process starts. A full restart is required to ensure that all the loaded tabs receive a consistent policy setting. It is harmless for processes to be running with different values of this policy.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#intensivewakeupthrottlingenabled"
InternetExplorerIntegrationCloudNeutralSitesReporting_Policy="Configure reporting of potentially misconfigured neutral site URLs to the M365 Admin Center Site Lists app"
InternetExplorerIntegrationCloudNeutralSitesReporting_Explain="This setting lets you enable reporting of sites that might need to be configured as a neutral site on the Enterprise Mode Site List. The user must be signed into Microsoft Edge with a valid work or school account for reports to be sent, and the user's account tenant must match the tenant specified by the policy.\n\nIf you configure this policy, Microsoft Edge will send a report to the M365 Admin Center Site Lists app when a navigation appears stuck redirecting back and forth between the Microsoft Edge and Internet Explorer engines several times. This usually indicates that redirection to an authentication server is switching engines, which repeatedly fails in a loop. The report will show the URL of the site that is the redirect target, minus any query string or fragment. The user's identity isn't reported.\n\nFor this reporting to work correctly, you must have successfully visited the Microsoft Edge Site Lists app in the M365 Admin Center at least once. This activates a per-tenant storage account used to store these reports. Microsoft Edge will still attempt to send reports if this step hasn't been completed. However, the reports will not be stored in the Site Lists app.\n\nWhen enabling this policy, you must specify your O365 tenant ID. To learn more about finding your O365 tenant ID, see https://go.microsoft.com/fwlink/?linkid=2185668\n\nIf you disable or don't configure this policy, Microsoft Edge will never send reports about potentially misconfigured neutral sites to the Site Lists app.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2165707\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationcloudneutralsitesreporting"
InternetExplorerIntegrationCloudNeutralSitesReporting_Part="Configure reporting of potentially misconfigured neutral site URLs to the M365 Admin Center Site Lists app"
InternetExplorerIntegrationCloudSiteList_Policy="Configure the Enterprise Mode Cloud Site List"
InternetExplorerIntegrationCloudSiteList_Explain="The Microsoft Edge Site Lists setting in the M365 Admin Center allows you to host your site list(s) in a compliant cloud location and manage the contents of your site list(s) through the built-in experience. This setting allows you to specify which site list within the M365 Admin Center to deploy to your users. The user must be signed into Microsoft Edge with a valid work or school account. Otherwise, Microsoft Edge will not download the site list from the cloud location.\n\nThis setting is applicable only when the 'InternetExplorerIntegrationLevel' (Configure Internet Explorer integration) setting is configured.\n\nIf you configure this policy, Microsoft Edge will use the specified site list. When enabled, you can enter the identifier of the site list that you created and published to the cloud in M365 Admin Center.\n\nThis setting takes precedence over Microsoft Edge's 'InternetExplorerIntegrationSiteList' (Configure the Enterprise Mode Site List) policy as well as Internet Explorer's site list setting (Use the Enterprise mode IE website list). If you disable or don't configure this policy, Microsoft Edge will use the 'InternetExplorerIntegrationSiteList' policy instead.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2165707\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationcloudsitelist"
InternetExplorerIntegrationCloudSiteList_Part="Configure the Enterprise Mode Cloud Site List"
InternetExplorerIntegrationCloudUserSitesReporting_Policy="Configure reporting of IE Mode user list entries to the M365 Admin Center Site Lists app"
InternetExplorerIntegrationCloudUserSitesReporting_Explain="This setting lets you enable reporting of sites that Microsoft Edge users add to their local IE Mode site list. The user must be signed into Microsoft Edge with a valid work or school account for reports to be sent, and the user's account tenant must match the tenant specified by the policy.\n\nIf you configure this policy, Microsoft Edge will send a report to the M365 Admin Center Site Lists app when a user adds a site to their local IE mode site list. The report will show the URL of the site the user added, minus any query string or fragment. The user's identity isn't reported.\n\nFor this reporting to work correctly, you must have successfully visited the Microsoft Edge Site Lists app in the M365 Admin Center at least once. This activates a per-tenant storage account used to store these reports. Microsoft Edge will still attempt to send reports if this step hasn't been completed. However, the reports will not be stored in the Site Lists app.\n\nWhen enabling this policy, you must specify your O365 tenant ID. To learn more about finding your O365 tenant ID, see https://go.microsoft.com/fwlink/?linkid=2185668\n\nIf you disable or don't configure this policy, Microsoft Edge will never send reports about URLs added to a user's local site list to the Site Lists app.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2165707\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationcloudusersitesreporting"
InternetExplorerIntegrationCloudUserSitesReporting_Part="Configure reporting of IE Mode user list entries to the M365 Admin Center Site Lists app"
InternetExplorerIntegrationComplexNavDataTypes_Policy="Configure whether form data and HTTP headers will be sent when entering or exiting Internet Explorer mode"
InternetExplorerIntegrationComplexNavDataTypes_Explain="Starting with Microsoft Edge version 96, navigations that switch between Internet Explorer mode and Microsoft Edge will include form data.\n\nIf you enable this policy, you can specify which data types should be included in navigations between Microsoft Edge and Internet Explorer mode.\n\nIf you disable or don't configure this policy, Microsoft Edge will use the new behavior of including form data in navigations that change modes.\n\nTo learn more, see https://go.microsoft.com/fwlink/?linkid=2174004\n\nPolicy options mapping:\n\n* IncludeNone (0) = Do not send form data or headers\n\n* IncludeFormDataOnly (1) = Send form data only\n\n* IncludeHeadersOnly (2) = Send additional headers only\n\n* IncludeFormDataAndHeaders (3) = Send form data and additional headers\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationcomplexnavdatatypes"
InternetExplorerIntegrationComplexNavDataTypes_Part="Configure whether form data and HTTP headers will be sent when entering or exiting Internet Explorer mode"
InternetExplorerIntegrationComplexNavDataTypes_IncludeNone_DropDown="Do not send form data or headers"
InternetExplorerIntegrationComplexNavDataTypes_IncludeFormDataOnly_DropDown="Send form data only"
InternetExplorerIntegrationComplexNavDataTypes_IncludeHeadersOnly_DropDown="Send additional headers only"
InternetExplorerIntegrationComplexNavDataTypes_IncludeFormDataAndHeaders_DropDown="Send form data and additional headers"
InternetExplorerIntegrationEnhancedHangDetection_Policy="Configure enhanced hang detection for Internet Explorer mode"
InternetExplorerIntegrationEnhancedHangDetection_Explain="Enhanced hang detection is a more granular approach to detecting hung webpages in Internet Explorer mode than what standalone Internet Explorer uses. When a hung webpage is detected, the browser will apply a mitigation to prevent the rest of the browser from hanging.\n\nThis setting allows you to configure the use of enhanced hang detection in case you run into incompatible issues with any of your websites. We recommend disabling this policy only if you see notifications such as "(website) is not responding" in Internet Explorer mode but not in standalone Internet Explorer.\n\nThis setting works in conjunction with:\n'InternetExplorerIntegrationLevel' (Configure Internet Explorer integration) is set to 'IEMode'\nand\n'InternetExplorerIntegrationSiteList' (Configure the Enterprise Mode Site List) policy where the list has at least one entry.\n\nIf you set this policy to 'Enabled' or don't configure it, websites running in Internet Explorer mode will use enhanced hang detection.\n\nIf you set this policy to 'Disabled', enhanced hang detection is disabled, and users will get the basic Internet Explorer hang detection behavior.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2094210\n\nPolicy options mapping:\n\n* Disabled (0) = Enhanced hang detection disabled\n\n* Enabled (1) = Enhanced hang detection enabled\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationenhancedhangdetection"
InternetExplorerIntegrationEnhancedHangDetection_Part="Configure enhanced hang detection for Internet Explorer mode"
InternetExplorerIntegrationEnhancedHangDetection_Disabled_DropDown="Enhanced hang detection disabled"
InternetExplorerIntegrationEnhancedHangDetection_Enabled_DropDown="Enhanced hang detection enabled"
InternetExplorerIntegrationLevel_Policy="Configure Internet Explorer integration"
InternetExplorerIntegrationLevel_Explain="For guidance about configuring the optimal experience for Internet Explorer mode see https://go.microsoft.com/fwlink/?linkid=2094210\n\nPolicy options mapping:\n\n* None (0) = None\n\n* IEMode (1) = Internet Explorer mode\n\n* NeedIE (2) = Internet Explorer 11\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationlevel"
InternetExplorerIntegrationLevel_Part="Configure Internet Explorer integration"
InternetExplorerIntegrationLevel_None_DropDown="None"
InternetExplorerIntegrationLevel_IEMode_DropDown="Internet Explorer mode"
InternetExplorerIntegrationLevel_NeedIE_DropDown="Internet Explorer 11"
InternetExplorerIntegrationLocalFileAllowed_Policy="Allow launching of local files in Internet Explorer mode"
InternetExplorerIntegrationLocalFileAllowed_Explain="This policy controls the availability of the --ie-mode-file-url command line argument which is used to launch Microsoft Edge with a local file specified on the command line into Internet Explorer mode.\n\nThis setting works in conjunction with:\n'InternetExplorerIntegrationLevel' (Configure Internet Explorer integration) is set to 'IEMode'.\n\nIf you set this policy to true, or don't configure it, the user is allowed to use the --ie-mode-file-url command line argument for launching local files in Internet Explorer mode.\n\nIf you set this policy to false, the user isn't allowed to use the --ie-mode-file-url command line argument for launching local files in Internet Explorer mode.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2094210\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationlocalfileallowed"
InternetExplorerIntegrationLocalFileExtensionAllowList_Policy="Open local files in Internet Explorer mode file extension allow list"
InternetExplorerIntegrationLocalFileExtensionAllowList_Explain="This policy limits which file:// URLs are allowed to be launched into Internet Explorer mode based on file extension.\n\nThis setting works in conjunction with:\n'InternetExplorerIntegrationLevel' (Configure Internet Explorer integration) is set to 'IEMode'.\n\nWhen a file:// URL is requested to launch in Internet Explorer mode, the file extension of the URL must be present in this list in order for the URL to be allowed to launch in Internet Explorer mode. A URL which is blocked from opening in Internet Explorer mode will instead open in Edge mode.\n\nIf you set this policy to the special value "*" or don't configure it, all file extensions are allowed.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2094210\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationlocalfileextensionallowlist"
InternetExplorerIntegrationLocalFileExtensionAllowList_Part="Open local files in Internet Explorer mode file extension allow list"
InternetExplorerIntegrationLocalFileShowContextMenu_Policy="Show context menu to open a file:// link in Internet Explorer mode"
InternetExplorerIntegrationLocalFileShowContextMenu_Explain="This policy controls the visibility of the 'Open link in new Internet Explorer mode tab' option on the context menu for file:// links.\n\nThis setting works in conjunction with:\n'InternetExplorerIntegrationLevel' (Configure Internet Explorer integration) is set to 'IEMode'.\n\nIf you set this policy to true, the 'Open link in new Internet Explorer mode tab' context menu item will be available for file:// links.\n\nIf you set this policy to false or don't configure it, the context menu item will not be added.\n\nIf the 'InternetExplorerIntegrationReloadInIEModeAllowed' (Allow unconfigured sites to be reloaded in Internet Explorer mode) policy allows users to reload sites in Internet Explorer mode, then the 'Open link in new Internet Explorer mode tab' context menu item will be available for all links, except links to sites explicitly configured by the site list to use Microsoft Edge mode. In this case, if you set this policy to true, the context menu item will be available for file:// links even for sites configured to use Microsoft Edge mode. If you set this policy to false or don't configure it, this policy has no effect.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2094210\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationlocalfileshowcontextmenu"
InternetExplorerIntegrationLocalSiteListExpirationDays_Policy="Specify the number of days that a site remains on the local IE mode site list"
InternetExplorerIntegrationLocalSiteListExpirationDays_Explain="If the 'InternetExplorerIntegrationReloadInIEModeAllowed' (Allow unconfigured sites to be reloaded in Internet Explorer mode) policy is enabled or not configured, users will be able to tell Microsoft Edge to load specific pages in Internet Explorer mode for a limited number of days.\n\nYou can use this setting to determine how many days that configuration is remembered in the browser. After this period has elapsed, the individual page will no longer automatically load in IE mode.\n\nIf you disable the 'InternetExplorerIntegrationReloadInIEModeAllowed' policy, this policy has no effect.\n\nIf you disable or don't configure this policy, the default value of 30 days is used.\n\nIf you enable this policy, you must enter the number of days for which the sites are retained on the user's local site list in Microsoft Edge. The value can be from 0 to 90 days.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2094210\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationlocalsitelistexpirationdays"
InternetExplorerIntegrationLocalSiteListExpirationDays_Part="Specify the number of days that a site remains on the local IE mode site list"
InternetExplorerIntegrationReloadInIEModeAllowed_Policy="Allow unconfigured sites to be reloaded in Internet Explorer mode"
InternetExplorerIntegrationReloadInIEModeAllowed_Explain="This policy allows users to reload unconfigured sites (that are not configured in the Enterprise Mode Site List) in Internet Explorer mode when browsing in Microsoft Edge and a site requires Internet Explorer for compatibility.\n\nAfter a site has been reloaded in Internet Explorer mode, "in-page" navigations will stay in Internet Explorer mode (for example, a link, script, or form on the page, or a server-side redirect from another "in-page" navigation). Users can choose to exit from Internet Explorer mode, or Microsoft Edge will automatically exit from Internet Explorer mode when a navigation that isn't "in-page" occurs (for example, using the address bar, the back button, or a favorite link).\n\nUsers can also optionally tell Microsoft Edge to use Internet Explorer mode for the site in the future. This choice will be remembered for a length of time managed by the 'InternetExplorerIntegrationLocalSiteListExpirationDays' (Specify the number of days that a site remains on the local IE mode site list) policy.\n\nIf the 'InternetExplorerIntegrationLevel' (Configure Internet Explorer integration) policy is set to 'IEMode', then sites explicitly configured by the 'InternetExplorerIntegrationSiteList' (Configure the Enterprise Mode Site List) policy's site list to use Microsoft Edge can't be reloaded in Internet Explorer mode, and sites configured by the site list or by the 'SendIntranetToInternetExplorer' (Send all intranet sites to Internet Explorer) policy to use Internet Explorer mode can't exit from Internet Explorer mode.\n\nIf you enable this policy, users are allowed to reload unconfigured sites in Internet Explorer mode.\n\nIf you disable this policy, users aren't allowed to reload unconfigured sites in Internet Explorer mode.\n\nNote that if you enable this policy, it takes precedence over how you configured the 'InternetExplorerIntegrationTestingAllowed' (Allow Internet Explorer mode testing) policy, and that policy will be disabled.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2094210\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationreloadiniemodeallowed"
InternetExplorerIntegrationSiteList_Policy="Configure the Enterprise Mode Site List"
InternetExplorerIntegrationSiteList_Explain="For guidance about configuring the optimal experience for Internet Explorer mode see https://go.microsoft.com/fwlink/?linkid=2094210\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationsitelist"
InternetExplorerIntegrationSiteList_Part="Configure the Enterprise Mode Site List"
InternetExplorerIntegrationSiteListRefreshInterval_Policy="Configure how frequently the Enterprise Mode Site List is refreshed"
InternetExplorerIntegrationSiteListRefreshInterval_Explain="This setting lets you specify a custom refresh interval for the Enterprise Mode Site List. The refresh interval is specified in minutes. The minimum refresh interval is 30 minutes.\n\nThis setting is applicable only when the 'InternetExplorerIntegrationSiteList' (Configure the Enterprise Mode Site List) or 'InternetExplorerIntegrationCloudSiteList' (Configure the Enterprise Mode Cloud Site List) setting is configured.\n\nIf you configure this policy, Microsoft Edge will attempt to retrieve an updated version of the configured Enterprise Mode Site List using the specified refresh interval.\n\nIf you disable or don't configure this policy, Microsoft Edge will use a default refresh interval, currently 120 minutes.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationsitelistrefreshinterval"
InternetExplorerIntegrationSiteListRefreshInterval_Part="Configure how frequently the Enterprise Mode Site List is refreshed"
InternetExplorerIntegrationSiteRedirect_Policy="Specify how "in-page" navigations to unconfigured sites behave when started from Internet Explorer mode pages"
InternetExplorerIntegrationSiteRedirect_Explain="An "in-page" navigation is started from a link, a script, or a form on the current page. It can also be a server-side redirect of a previous "in-page" navigation attempt. Conversely, a user can start a navigation that isn't "in-page" that's independent of the current page in several ways by using the browser controls. For example, using the address bar, the back button, or a favorite link.\n\nThis setting lets you specify whether navigations from pages loaded in Internet Explorer mode to unconfigured sites (that are not configured in the Enterprise Mode Site List) switch back to Microsoft Edge or remain in Internet Explorer mode.\n\nThis setting works in conjunction with:\n'InternetExplorerIntegrationLevel' (Configure Internet Explorer integration) is set to 'IEMode'\nand\n'InternetExplorerIntegrationSiteList' (Configure the Enterprise Mode Site List) policy where the list has at least one entry.\n\nIf you disable or don't configure this policy, only sites configured to open in Internet Explorer mode will open in that mode. Any site not configured to open in Internet Explorer mode will be redirected back to Microsoft Edge.\n\nIf you set this policy to 'Default', only sites configured to open in Internet Explorer mode will open in that mode. Any site not configured to open in Internet Explorer mode will be redirected back to Microsoft Edge.\n\nIf you set this policy to 'AutomaticNavigationsOnly', you get the default experience except that all automatic navigations (such as 302 redirects) to unconfigured sites will be kept in Internet Explorer mode.\n\nIf you set this policy to 'AllInPageNavigations', all navigations from pages loaded in IE mode to unconfigured sites are kept in Internet Explorer mode (Least Recommended).\n\nIf the 'InternetExplorerIntegrationReloadInIEModeAllowed' (Allow unconfigured sites to be reloaded in Internet Explorer mode) policy allows users to reload sites in Internet Explorer mode, then all in-page navigations from unconfigured sites that users have chosen to reload in Internet Explorer mode will be kept in Internet Explorer mode, regardless of how this policy is configured.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2105106\n\nPolicy options mapping:\n\n* Default (0) = Standard\n\n* AutomaticNavigationsOnly (1) = Keep only automatic navigations in Internet Explorer mode\n\n* AllInPageNavigations (2) = Keep all in-page navigations in Internet Explorer mode\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationsiteredirect"
InternetExplorerIntegrationSiteRedirect_Part="Specify how "in-page" navigations to unconfigured sites behave when started from Internet Explorer mode pages"
InternetExplorerIntegrationSiteRedirect_Default_DropDown="Standard"
InternetExplorerIntegrationSiteRedirect_AutomaticNavigationsOnly_DropDown="Keep only automatic navigations in Internet Explorer mode"
InternetExplorerIntegrationSiteRedirect_AllInPageNavigations_DropDown="Keep all in-page navigations in Internet Explorer mode"
InternetExplorerIntegrationTestingAllowed_Policy="Allow Internet Explorer mode testing (obsolete)"
InternetExplorerIntegrationTestingAllowed_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 94.\n\nThis policy is obsolete because it has been superseded by an improved feature. It doesn't work in Microsoft Edge after version 94. To allow users to open applications in Internet Explorer mode, use the 'InternetExplorerIntegrationReloadInIEModeAllowed' (Allow unconfigured sites to be reloaded in Internet Explorer mode) policy instead. Alternatively, users can still use the --ie-mode-test flag.\n\nThis policy allows users to test applications in Internet Explorer mode by opening an Internet Explorer mode tab in Microsoft Edge.\n\nUsers can do so from within the "More tools" menu by selecting 'Open sites in Internet Explorer mode'.\n\nAdditionally, users can test their applications in a modern browser without removing applications from the site list using the option 'Open sites in Edge mode'.\n\nThis setting works in conjunction with:\n'InternetExplorerIntegrationLevel' (Configure Internet Explorer integration) is set to 'IEMode'.\n\nIf you enable this policy, the option to 'Open sites in Internet Explorer mode' will be visible under "More tools". Users can view their sites in Internet Explorer mode on this tab. Another option to 'Open sites in Edge mode' will also be visible under "More tools" to help testing sites in a modern browser without removing them from the site list. Note that if the 'InternetExplorerIntegrationReloadInIEModeAllowed' policy is enabled, it takes precedence and these options will not be visible under "More tools".\n\nIf you disable or don't configure this policy, users can't see the options 'Open in Internet Explorer mode' and 'Open in Edge mode' under "More tools" menu. However, users can configure these options with the --ie-mode-test flag.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationtestingallowed"
InternetExplorerIntegrationWindowOpenHeightAdjustment_Policy="Configure the pixel adjustment between window.open heights sourced from IE mode pages vs. Edge mode pages"
InternetExplorerIntegrationWindowOpenHeightAdjustment_Explain="This setting lets you specify a custom adjustment to the height of popup windows generated via window.open from the Internet Explorer mode site.\n\nIf you configure this policy, Microsoft Edge will add the adjustment value to the height, in pixels. The exact difference depends on the UI configuration of both IE and Edge, but a typical difference is 5.\n\nIf you disable or don't configure this policy, Microsoft Edge will treat IE mode window.open the same as Edge mode window.open in window height calculations.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationwindowopenheightadjustment"
InternetExplorerIntegrationWindowOpenHeightAdjustment_Part="Configure the pixel adjustment between window.open heights sourced from IE mode pages vs. Edge mode pages"
InternetExplorerIntegrationWindowOpenWidthAdjustment_Policy="Configure the pixel adjustment between window.open widths sourced from IE mode pages vs. Edge mode pages"
InternetExplorerIntegrationWindowOpenWidthAdjustment_Explain="This setting lets you specify a custom adjustment to the width of popup windows generated via window.open from the Internet Explorer mode site.\n\nIf you configure this policy, Microsoft Edge will add the adjustment value to the width, in pixels. The exact difference depends on the UI configuration of both IE and Edge, but a typical difference is 4.\n\nIf you disable or don't configure this policy, Microsoft Edge will treat IE mode window.open the same as Edge mode window.open in window width calculations.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorerintegrationwindowopenwidthadjustment"
InternetExplorerIntegrationWindowOpenWidthAdjustment_Part="Configure the pixel adjustment between window.open widths sourced from IE mode pages vs. Edge mode pages"
InternetExplorerModeEnableSavePageAs_Policy="Allow Save page as in Internet Explorer mode"
InternetExplorerModeEnableSavePageAs_Explain="This policy enables 'Save page as' functionality in Internet Explorer mode.\nUsers can use this option to save the current page in the browser. When a user re-opens a saved page, it will be loaded in the default browser.\n\nIf you enable this policy, the "Save page as" option will be clickable in "More tools".\n\nIf you disable or don't configure this policy, users can't select the "Save page as" option in "More tools".\n\nNote: To make the "Ctrl+S" shortcut work, users must enable the Internet Explorer policy, 'Enable extended hot key in Internet Explorer mode'.\n\nTo learn more about Internet Explorer mode, see https://go.microsoft.com/fwlink/?linkid=2094210\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorermodeenablesavepageas"
InternetExplorerModeTabInEdgeModeAllowed_Policy="Allow sites configured for Internet Explorer mode to open in Microsoft Edge"
InternetExplorerModeTabInEdgeModeAllowed_Explain="This policy lets sites configured to open in Internet Explorer mode to be opened by Microsoft Edge for testing on a modern browser without removing them from the site list.\n\nUsers can configure this setting in the "More tools" menu by selecting 'Open sites in Microsoft Edge'.\n\nIf you enable this policy, the option to 'Open sites in Microsoft Edge' will be visible under "More tools". Users use this option to test IE mode sites on a modern browser.\n\nIf you disable or don't configure this policy, users can't see the option 'Open in Microsoft Edge' under the "More tools" menu. However, users can access this menu option with the --ie-mode-test flag.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorermodetabinedgemodeallowed"
InternetExplorerModeToolbarButtonEnabled_Policy="Show the Reload in Internet Explorer mode button in the toolbar"
InternetExplorerModeToolbarButtonEnabled_Explain="Set this policy to show the Reload in Internet Explorer mode button in the toolbar. Users can hide the button in the toolbar through edge://settings/appearance.  The button will only be shown on the toolbar when the 'InternetExplorerIntegrationReloadInIEModeAllowed' (Allow unconfigured sites to be reloaded in Internet Explorer mode) policy is enabled or if the user has chosen to enable "Allow sites to be reloaded in Internet Explorer mode".\n\nIf you enable this policy, the Reload in Internet mode button is pinned to the toolbar.\n\nIf you disable or don't configure this policy, the Reload in Internet Explorer mode button isn't shown in the toolbar by default. Users can toggle the Show Internet Explorer mode button in edge://settings/appearance.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#internetexplorermodetoolbarbuttonenabled"
IntranetRedirectBehavior_Policy="Intranet Redirection Behavior"
IntranetRedirectBehavior_Explain="This policy configures behavior for intranet redirection via DNS interception checks. The checks attempt to discover whether the browser is behind a proxy that redirects unknown host names.\n\nIf this policy isn't configured, the browser will use the default behavior of DNS interception checks and intranet redirect suggestions. In M88, they are enabled by default but will be disabled by default in the future release.\n\n'DNSInterceptionChecksEnabled' (DNS interception checks enabled) is a related policy that might also disable DNS interception checks. However, this policy is a more flexible version which might separately control intranet redirection infobars and might be expanded in the future.\nIf either 'DNSInterceptionChecksEnabled' or this policy make a request to disable interception checks, the checks will be disabled.\nIf DNS interception checks are disabled by this policy but 'GoToIntranetSiteForSingleWordEntryInAddressBar' (Force direct intranet site navigation instead of searching on single word entries in the Address Bar) is enabled, single word queries will still result in intranet navigations.\n\nPolicy options mapping:\n\n* Default (0) = Use default browser behavior.\n\n* DisableInterceptionChecksDisableInfobar (1) = Disable DNS interception checks and did-you-mean "http://intranetsite/" infobars.\n\n* DisableInterceptionChecksEnableInfobar (2) = Disable DNS interception checks; allow did-you-mean "http://intranetsite/" infobars.\n\n* EnableInterceptionChecksEnableInfobar (3) = Allow DNS interception checks and did-you-mean "http://intranetsite/" infobars.\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#intranetredirectbehavior"
IntranetRedirectBehavior_Part="Intranet Redirection Behavior"
IntranetRedirectBehavior_Default_DropDown="Use default browser behavior."
IntranetRedirectBehavior_DisableInterceptionChecksDisableInfobar_DropDown="Disable DNS interception checks and did-you-mean "http://intranetsite/" infobars."
IntranetRedirectBehavior_DisableInterceptionChecksEnableInfobar_DropDown="Disable DNS interception checks; allow did-you-mean "http://intranetsite/" infobars."
IntranetRedirectBehavior_EnableInterceptionChecksEnableInfobar_DropDown="Allow DNS interception checks and did-you-mean "http://intranetsite/" infobars."
IsolateOrigins_Policy="Enable site isolation for specific origins"
IsolateOrigins_Explain="Specify origins to run in an isolated process.\n\nBy default, Microsoft Edge isolates pages from each Site into its own process. This policy enables more granular isolation based on Origin rather than Site. For example, specifying https://subdomain.contoso.com/ will cause pages from https://subdomain.contoso.com/ to be isolated in a different process than pages from other Origins within the https://contoso.com/ Site.\n\nIf you enable this policy, each of the named origins in a comma-separated list will run in its own process.\n\nIf you disable or don't configure this policy, pages will be isolated on a per-Site basis.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#isolateorigins"
IsolateOrigins_Part="Enable site isolation for specific origins"
LocalBrowserDataShareEnabled_Policy="Enable Windows to search local Microsoft Edge browsing data"
LocalBrowserDataShareEnabled_Explain="Enables Windows to index Microsoft Edge browsing data stored locally on the user's device and allows users to find and launch previously stored browsing data directly from Windows features such as the search box on the taskbar in Windows.\n\nIf you enable this policy or don't configure it, Microsoft Edge will publish local browsing data to the Windows Indexer.\n\nIf you disable this policy, Microsoft Edge will not share data to the Windows Indexer.\n\nNote that if you disable this policy, Microsoft Edge will remove the data shared with Windows on the device and stop sharing any new browsing data.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#localbrowserdatashareenabled"
LocalProvidersEnabled_Policy="Allow suggestions from local providers"
LocalProvidersEnabled_Explain="Allow suggestions from suggestion providers on the device (local providers), for example, Favorites and Browsing History, in Microsoft Edge's Address Bar and Auto-Suggest List.\n\nIf you enable this policy, suggestions from local providers are used.\n\nIf you disable this policy, suggestions from local providers are never used. Local history and local favorites suggestions will not appear.\n\nIf you do not configure this policy, suggestions from local providers are allowed but the user can change that using the settings toggle.\n\nNote that some features may not be available if a policy to disable this feature has been applied. For example, Browsing History suggestions will not be available if you enable the 'SavingBrowserHistoryDisabled' (Deaktiver lagring av nettleserlogg) policy.\n\nThis policy requires a browser restart to finish applying.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#localprovidersenabled"
MSAWebSiteSSOUsingThisProfileAllowed_Policy="Allow single sign-on for Microsoft personal sites using this profile"
MSAWebSiteSSOUsingThisProfileAllowed_Explain="'Allow single sign-on for Microsoft personal sites using this profile' option allows non-MSA profiles to be able to use single sign-on for Microsoft sites using MSA credentials present on the machine. This option shows up for end-users as a toggle in Settings -> Profiles -> Profile Preferences for non-MSA profiles only.\n\nIf you disable this policy, non-MSA profiles will not be able to use single sign-on for Microsoft sites using MSA credentials present on the machine.\n\nIf you enable this policy or don't configure it, users will be able to use the Settings option to ensure non-MSA profiles are able to use single sign-on for Microsoft sites using MSA credentials present on the machine provided only a single MSA account exists on the machine.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#msawebsitessousingthisprofileallowed"
ManagedFavorites_Policy="Configure favorites"
ManagedFavorites_Explain="Configures a list of managed favorites.\n\nThe policy creates a list of favorites. Each favorite contains the keys "name" and "url," which hold the favorite's name and its target. You can configure a subfolder by defining a favorites without an "url" key but with an additional "children" key that contains a list of favorites as defined above (some of which may be folders again). Microsoft Edge amends incomplete URLs as if they were submitted via the Address Bar, for example "microsoft.com" becomes "https://microsoft.com/".\n\nThese favorites are placed in a folder that can't be modified by the user (but the user can choose to hide it from the favorites bar). By default the folder name is "Managed favorites" but you can change it by adding to the list of favorites a dictionary containing the key "toplevel_name" with the desired folder name as the value.\n\nManaged favorites are not synced to the user account and can't be modified by extensions.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#managedfavorites"
ManagedFavorites_Part="Configure favorites"
ManagedConfigurationPerOrigin_Policy="Sets managed configuration values for websites to specific origins"
ManagedConfigurationPerOrigin_Explain="Setting this policy defines the return value of Managed Configuration API for given origin.\n\n Managed Configuration API is a key-value configuration that can be accessed via navigator.device.getManagedConfiguration() javascript call. This API is only available to origins which correspond to force-installed web applications via 'WebAppInstallForceList' (Konfigurer en liste over administratorinstallerte nettprogrammer).\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#managedconfigurationperorigin"
ManagedConfigurationPerOrigin_Part="Sets managed configuration values for websites to specific origins"
ManagedSearchEngines_Policy="Manage Search Engines"
ManagedSearchEngines_Explain="Lets you configure a list of up to 10 search engines, one of which must be marked as the default search engine. Starting in Microsoft Edge version 100, you can configure up to 100 engines.\n\nYou do not need to specify the encoding. Starting in Microsoft Edge 80, the suggest_url and image_search_url parameters are optional. The optional parameter, image_search_post_params (consists of comma-separated name/value pairs), is available starting in Microsoft Edge 80.\n\nStarting in Microsoft Edge 83, you can enable search engine discovery with the optional allow_search_engine_discovery parameter. This parameter must be the first item in the list. If allow_search_engine_discovery isn't specified, search engine discovery will be disabled by default. Starting in Microsoft Edge 84, you can set this policy as a recommended policy to allow search provider discovery. You don't need to add the optional allow_search_engine_discovery parameter. Starting in Microsoft Edge 100, setting this policy as a recommended policy will also allow users to manually add new search engines from their Microsoft Edge settings.\n\nIf you enable this policy, users can't add, remove, or change any search engine in the list. Users can set their default search engine to any search engine in the list.\n\nIf you disable or don't configure this policy, users can modify the search engines list as desired.\n\nIf the 'DefaultSearchProviderSearchURL' (Nettadresse for søk for standard søkeleverandør) policy is set, this policy (ManagedSearchEngines) is ignored. The user must restart their browser to finish applying this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#managedsearchengines"
ManagedSearchEngines_Part="Manage Search Engines"
MathSolverEnabled_Policy="Let users snip a Math problem and get the solution with a step-by-step explanation in Microsoft Edge"
MathSolverEnabled_Explain="This policy lets you manage whether users can use the Math Solver tool in Microsoft Edge or not.\n\nIf you enable or don't configure the policy, then a user can take a snip of the Math problem and get the solution including a step-by-step explanation of the solution in a Microsoft Edge side pane.\n\nIf you disable the policy, then the Math Solver tool will be disabled and users will not be able to use it.\n\nNote: Setting the 'ComponentUpdatesEnabled' (Aktivér komponentoppdateringer i Microsoft Edge) policy to disabled will also disable the Math Solver component.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#mathsolverenabled"
MaxConnectionsPerProxy_Policy="Maximum number of concurrent connections to the proxy server"
MaxConnectionsPerProxy_Explain="Specifies the maximum number of simultaneous connections to the proxy server.\n\nSome proxy servers can't handle a high number of concurrent connections per client - you can solve this by setting this policy to a lower value.\n\nThe value of this policy should be lower than 100 and higher than 6. The default value is 32.\n\nSome web apps are known to consume many connections with hanging GETs - lowering the maximum connections below 32 may lead to browser networking hangs if too many of these kind of web apps are open.\n\nIf you don't configure this policy, the default value (32) is used.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#maxconnectionsperproxy"
MaxConnectionsPerProxy_Part="Maximum number of concurrent connections to the proxy server"
MediaRouterCastAllowAllIPs_Policy="Allow Google Cast to connect to Cast devices on all IP addresses"
MediaRouterCastAllowAllIPs_Explain="Enable this policy to let Google Cast connect to Cast devices on all IP addresses, not just RFC1918/RFC4193 private addresses.\n\nDisable this policy to restrict Google Cast to Cast devices on RFC1918/RFC4193 private addresses.\n\nIf you don't configure this policy, Google Cast connects to Cast devices on RFC1918/RFC4193 private addresses only, unless you enable the CastAllowAllIPs feature.\n\nIf the 'EnableMediaRouter' (Enable Google Cast) policy is disabled, then this policy has no effect.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#mediaroutercastallowallips"
MetricsReportingEnabled_Policy="Enable usage and crash-related data reporting (obsolete)"
MetricsReportingEnabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 88.\n\nThis policy is no longer supported. It is replaced by 'DiagnosticData' (Send required and optional diagnostic data about browser usage) (for Windows 7, Windows 8, and macOS) and Allow Telemetry on Win 10 (https://go.microsoft.com/fwlink/?linkid=2099569).\n\nThis policy enables reporting of usage and crash-related data about Microsoft Edge to Microsoft.\n\nEnable this policy to send reporting of usage and crash-related data to Microsoft. Disable this policy to not send the data to Microsoft. In both cases, users can't change or override the setting.\n\nOn Windows 10, if you don't configure this policy, Microsoft Edge will default to the Windows diagnostic data setting. If you enable this policy, Microsoft Edge will only send usage data if the Windows Diagnostic data setting is set to Enhanced or Full. If you disable this policy, Microsoft Edge will not send usage data. Crash-related data is sent based on the Windows Diagnostic data setting. Learn more about Windows Diagnostic data settings at https://go.microsoft.com/fwlink/?linkid=2099569\n\nOn Windows 7, Windows 8, and macOS, this policy controls sending usage and crash-related data. If you don't configure this policy, Microsoft Edge will default to the user's preference.\n\nTo enable this policy,'SendSiteInfoToImproveServices' (Send site information to improve Microsoft services) must be set to Enabled. If 'MetricsReportingEnabled' (Enable usage and crash-related data reporting) or 'SendSiteInfoToImproveServices' is Not Configured or Disabled, this data will not be sent to Microsoft.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management, or macOS instances that are that are managed via MDM or joined to a domain via MCX.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#metricsreportingenabled"
MicrosoftEdgeInsiderPromotionEnabled_Policy="Microsoft Edge Insider Promotion Enabled"
MicrosoftEdgeInsiderPromotionEnabled_Explain="Shows content promoting the Microsoft Edge Insider channels on the About Microsoft Edge settings page.\n\nIf you enable or don't configure this policy, the Microsoft Edge Insider promotion content will be shown on the About Microsoft Edge page.\n\nIf you disable this policy, the Microsoft Edge Insider promotion content will not be shown on the About Microsoft Edge page.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#microsoftedgeinsiderpromotionenabled"
MicrosoftOfficeMenuEnabled_Policy="Allow users to access the Microsoft Office menu"
MicrosoftOfficeMenuEnabled_Explain="When users can access the Microsoft Office menu, they can get access to Office applications such as Microsoft Word and Microsoft Excel.\n\nIf you enable or don't configure this policy, users can open the Microsoft Office menu.\n\nIf you disable this policy, users won't be able to access the Microsoft Office menu.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#microsoftofficemenuenabled"
NativeWindowOcclusionEnabled_Policy="Enable Native Window Occlusion (deprecated)"
NativeWindowOcclusionEnabled_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nThis policy is deprecated, use the ''WindowOcclusionEnabled' (Enable Window Occlusion)' policy instead. It won't work in Microsoft Edge version 92.\n\nEnables native window occlusion in Microsoft Edge.\n\nIf you enable this setting, to reduce CPU and power consumption Microsoft Edge will detect when a window is covered by other windows, and will suspend work painting pixels.\n\nIf you disable this setting Microsoft Edge will not detect when a window is covered by other windows.\n\nIf this policy is left not set, occlusion detection will be enabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#nativewindowocclusionenabled"
NavigationDelayForInitialSiteListDownloadTimeout_Policy="Set a timeout for delay of tab navigation for the Enterprise Mode Site List"
NavigationDelayForInitialSiteListDownloadTimeout_Explain="Allows you to set a timeout, in seconds, for Microsoft Edge tabs waiting to navigate until the browser has downloaded the initial Enterprise Mode Site List.\n\nThis setting works in conjunction with:\n'InternetExplorerIntegrationLevel' (Configure Internet Explorer integration) is set to 'IEMode'\nand\n'InternetExplorerIntegrationSiteList' (Configure the Enterprise Mode Site List) policy where the list has at least one entry\nand\n'DelayNavigationsForInitialSiteListDownload' (Require that the Enterprise Mode Site List is available before tab navigation) is set to "All eligible navigations" (1).\n\nTabs will not wait longer than this timeout for the Enterprise Mode Site List to download. If the browser has not finished downloading the Enterprise Mode Site List when the timeout expires, Microsoft Edge tabs will continue navigating anyway. The value of the timeout should be no greater than 20 seconds and no fewer than 1 second.\n\nIf you set the timeout in this policy to a value greater than the default of 2 seconds, an information bar is shown to the user after 2 seconds. The information bar contains a button that allows the user to quit waiting for the Enterprise Mode Site List download to complete.\n\nIf you don't configure this policy, the default timeout of 2 seconds is used. This default is subject to change in the future.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#navigationdelayforinitialsitelistdownloadtimeout"
NavigationDelayForInitialSiteListDownloadTimeout_Part="Set a timeout for delay of tab navigation for the Enterprise Mode Site List"
NetworkPredictionOptions_Policy="Slå på nettverksforutsigelse"
NetworkPredictionOptions_Explain="Enables network prediction and prevents users from changing this setting.\n\nThis controls DNS prefetching, TCP and SSL preconnection, and prerendering of web pages.\n\nIf you don't configure this policy, network prediction is enabled but the user can change it.\n\nPolicy options mapping:\n\n* NetworkPredictionAlways (0) = Forutsi nettverkshandlinger på alle nettverkstilkoblinger\n\n* NetworkPredictionWifiOnly (1) = Not supported, if this value is used it will be treated as if 'Predict network actions on any network connection' (0) was set\n\n* NetworkPredictionNever (2) = Don't predict network actions on any network connection\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#networkpredictionoptions"
NetworkPredictionOptions_Part="Slå på nettverksforutsigelse"
NetworkPredictionOptions_NetworkPredictionAlways_DropDown="Forutsi nettverkshandlinger på alle nettverkstilkoblinger"
NetworkPredictionOptions_NetworkPredictionWifiOnly_DropDown="Not supported, if this value is used it will be treated as if 'Predict network actions on any network connection' (0) was set"
NetworkPredictionOptions_NetworkPredictionNever_DropDown="Don't predict network actions on any network connection"
NonRemovableProfileEnabled_Policy="Configure whether a user always has a default profile automatically signed in with their work or school account"
NonRemovableProfileEnabled_Explain="This policy determines if a user can remove the Microsoft Edge profile automatically signed in with a user's work or school account.\n\nIf you enable this policy, a non-removable profile will be created with the user's work or school account on Windows. This profile can't be signed out or removed. The profile will be non-removable only if profile is signed-in with either on-premises account or Azure AD account that matches OS sign-in account.\n\nIf you disable or don't configure this policy, the profile automatically signed in with a user's work or school account on Windows can be signed out or removed by the user.\n\nIf you want to configure browser sign in, use the 'BrowserSignin' (Browser sign-in settings) policy.\n\nThis policy is available only on Windows instances that are joined to a Microsoft Active Directory domain, Windows 10 Pro or Enterprise instances that enrolled for device management.\n\nFrom Microsoft Edge 89 onwards, if there is an existing on-premises profile with sync disabled and machine is hybrid joined, it will auto-upgrade the on-premises profile to Azure AD profile and make it non-removable instead of creating a new non-removable Azure AD profile.\n\nFrom Microsoft Edge 93 onwards, if policy 'ImplicitSignInEnabled' (Enable implicit sign-in) is disabled, this policy will not take any effect.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#nonremovableprofileenabled"
OverrideSecurityRestrictionsOnInsecureOrigin_Policy="Control where security restrictions on insecure origins apply"
OverrideSecurityRestrictionsOnInsecureOrigin_Explain="Specifies a list of origins (URLs) or hostname patterns (like "*.contoso.com") for which security restrictions on insecure origins don't apply.\n\nThis policy lets you specify allowed origins for legacy applications that can't deploy TLS or set up a staging server for internal web development so that developers can test out features requiring secure contexts without having to deploy TLS on the staging server. This policy also prevents the origin from being labeled "Not Secure" in the omnibox.\n\nSetting a list of URLs in this policy has the same effect as setting the command-line flag '--unsafely-treat-insecure-origin-as-secure' to a comma-separated list of the same URLs. If you enable this policy, it overrides the command-line flag.\n\nFor more information on secure contexts, see https://www.w3.org/TR/secure-contexts/.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#overridesecurityrestrictionsoninsecureorigin"
OverrideSecurityRestrictionsOnInsecureOrigin_Part="Control where security restrictions on insecure origins apply"
PDFSecureMode_Policy="Secure mode and Certificate-based Digital Signature validation in native PDF reader"
PDFSecureMode_Explain="The policy enables Digital Signature validation for PDF files in a secure environment, which shows the correct validation status of the signatures.\n\nIf you enable this policy, PDF files with Certificate-based digital signatures are opened with an option to view and verify the validity of the signatures with high security.\n\nIf you disable or don't configure this policy, the capability to view and verify the signature will not be available.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#pdfsecuremode"
PaymentMethodQueryEnabled_Policy="Allow websites to query for available payment methods"
PaymentMethodQueryEnabled_Explain="Allows you to set whether websites can check if the user has payment methods saved.\n\nIf you disable this policy, websites that use PaymentRequest.canMakePayment or PaymentRequest.hasEnrolledInstrument API will be informed that no payment methods are available.\n\nIf you enable this policy or don't set this policy, websites can check if the user has payment methods saved.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#paymentmethodqueryenabled"
PersonalizationReportingEnabled_Policy="Allow personalization of ads, Microsoft Edge, search, news and other Microsoft services by sending browsing history, favorites and collections, usage and other browsing data to Microsoft"
PersonalizationReportingEnabled_Explain="This policy prevents Microsoft from collecting a user's Microsoft Edge browsing history, favorites and collections, usage, and other browsing data to be used for personalizing advertising, search, news, Microsoft Edge and other Microsoft services.\n\nThis setting is not available for child accounts or enterprise accounts.\n\nIf you disable this policy, users can't change or override the setting. If this policy is enabled or not configured, Microsoft Edge will default to the user's preference.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#personalizationreportingenabled"
PinningWizardAllowed_Policy="Allow Pin to taskbar wizard"
PinningWizardAllowed_Explain="Microsoft Edge uses the Pin to taskbar wizard to help users pin suggested sites to the taskbar. The Pin to taskbar wizard feature is enabled by default and accessible to the user through the Settings and more menu.\n\nIf you enable this policy or don't configure it, users can call the Pin to taskbar wizard from the Settings and More menu. The wizard can also be called via a protocol launch.\n\nIf you disable this policy, the Pin to taskbar wizard is disabled in the menu and cannot be called via a protocol launch.\n\nUser settings to enable or disable the Pin to taskbar wizard aren't available.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#pinningwizardallowed"
ProactiveAuthEnabled_Policy="Enable Proactive Authentication (obsolete)"
ProactiveAuthEnabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 90.\n\nThis policy is obsolete because it does not work independently of browser sign in. It does not work in Microsoft Edge after version 90. If you want to configure browser sign in, use the 'BrowserSignin' (Browser sign-in settings) policy.\n\nLets you configure whether to turn on Proactive Authentication in Microsoft Edge.\n\nIf you enable this policy, Microsoft Edge tries to seamlessly authenticate to websites and services using the account which is signed-in to the browser.\n\nIf you disable this policy, Microsoft Edge does not try to authenticate with websites or services using single sign-on (SSO). Authenticated experiences like the Enterprise New Tab Page will not work (e.g. recent and recommended Office documents will not be available).\n\nIf you don't configure this policy, Proactive Authentication is turned on.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#proactiveauthenabled"
PromotionalTabsEnabled_Policy="Enable full-tab promotional content"
PromotionalTabsEnabled_Explain="Control the presentation of full-tab promotional or educational content. This setting controls the presentation of welcome pages that help users sign into Microsoft Edge, choose their default browser, or learn about product features.\n\nIf you enable this policy (set it true) or don't configure it, Microsoft Edge can show full-tab content to users to provide product information.\n\nIf you disable (set to false) this policy, Microsoft Edge can't show full-tab content to users.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#promotionaltabsenabled"
PromptForDownloadLocation_Policy="Ask where to save downloaded files"
PromptForDownloadLocation_Explain="Set whether to ask where to save a file before downloading it.\n\nIf you enable this policy, the user is asked where to save each file before downloading; if you don't configure it, files are saved automatically to the default location, without asking the user.\n\nIf you don't configure this policy, the user will be able to change this setting.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#promptfordownloadlocation"
QuicAllowed_Policy="Tillat QUIC-protokollen"
QuicAllowed_Explain="Allows use of the QUIC protocol in Microsoft Edge.\n\nIf you enable this policy or don't configure it, the QUIC protocol is allowed.\n\nIf you disable this policy, the QUIC protocol is blocked.\n\nQUIC is a transport layer network protocol that can improve performance of web applications that currently use TCP.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#quicallowed"
QuickViewOfficeFilesEnabled_Policy="Manage QuickView Office files capability in Microsoft Edge"
QuickViewOfficeFilesEnabled_Explain="Allows you to set whether users can view publicly accessible Office files on the web that aren't on OneDrive or SharePoint. (For example: Word documents, PowerPoint presentations, and Excel spreadsheets)\n\nIf you enable or don't configure this policy, these files can be viewed in Microsoft Edge using Office Viewer instead of downloading the files.\n\nIf you disable this policy, these files will be downloaded to be viewed.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#quickviewofficefilesenabled"
RedirectSitesFromInternetExplorerPreventBHOInstall_Policy="Prevent install of the BHO to redirect incompatible sites from Internet Explorer to Microsoft Edge"
RedirectSitesFromInternetExplorerPreventBHOInstall_Explain="This setting lets you specify whether to block the install of the Browser Helper Object (BHO) that enables redirecting incompatible sites from Internet Explorer to Microsoft Edge for sites that require a modern browser.\n\nIf you enable this policy, the BHO will not be installed. If it is already installed it will be uninstalled on the next Microsoft Edge update.\n\nIf this policy is not configured or is disabled, the BHO will be installed.\n\nThe BHO is required for incompatible site redirection to occur, however whether redirection occurs or not is also controlled by 'RedirectSitesFromInternetExplorerRedirectMode' (Redirect incompatible sites from Internet Explorer to Microsoft Edge).\n\nFor more information about this policy see https://go.microsoft.com/fwlink/?linkid=2141715\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#redirectsitesfrominternetexplorerpreventbhoinstall"
RedirectSitesFromInternetExplorerRedirectMode_Policy="Redirect incompatible sites from Internet Explorer to Microsoft Edge"
RedirectSitesFromInternetExplorerRedirectMode_Explain="This setting lets you specify whether Internet Explorer will redirect navigations to sites that require a modern browser to Microsoft Edge.\nIf you set this policy to 'Disable' ('Prevent redirection', value 0), Internet Explorer will not redirect any traffic to Microsoft Edge.\n\nIf you set this policy to 'Sitelist', starting with Microsoft Edge major release 87 , Internet Explorer (IE) will redirect sites that require a modern browser to Microsoft Edge. (Note: The Sitelist setting is 'Redirect sites based on the incompatible sites sitelist', value 1).\n\nWhen a site is redirected from Internet Explorer to Microsoft Edge, the Internet Explorer tab that started loading the site is closed if it had no prior content. Otherwise, the user is taken to a Microsoft help page that explains why the site was redirected to Microsoft Edge. When Microsoft Edge is launched to load an IE site, an information bar explains that the site works best in a modern browser.\n\nIf you want to redirect all navigations, you can configure the Disable Internet Explorer 11 policy, which redirects all navigations from IE11 to Microsoft Edge. It also hides the IE11 app icon from the user after the first launch.\n\nIf don't configure this policy:\n  - Starting with Microsoft Edge major release 87, you will have the same experience as setting the policy to 'Sitelist': Internet Explorer will redirect sites that require a modern browser to Microsoft Edge.\n  - In the future, the default for your organization might change to automatically redirect all navigations. If you don't want automatic redirection, set this policy to 'Disable' or 'Sitelist'.\n\nFor more information about this policy see  https://go.microsoft.com/fwlink/?linkid=2141715\n\nPolicy options mapping:\n\n* Disable (0) = Prevent redirection\n\n* Sitelist (1) = Redirect sites based on the incompatible sites sitelist\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#redirectsitesfrominternetexplorerredirectmode"
RedirectSitesFromInternetExplorerRedirectMode_Part="Redirect incompatible sites from Internet Explorer to Microsoft Edge"
RedirectSitesFromInternetExplorerRedirectMode_Disable_DropDown="Prevent redirection"
RedirectSitesFromInternetExplorerRedirectMode_Sitelist_DropDown="Redirect sites based on the incompatible sites sitelist"
RelatedMatchesCloudServiceEnabled_Policy="Configure Related Matches in Find on Page"
RelatedMatchesCloudServiceEnabled_Explain="Specifies how the user receives related matches in Find on Page, which provides spellcheck, synonyms, and Q&A results in Microsoft Edge.\n\nIf you enable or don't configure this policy, users can receive related matches in Find on Page on all sites. The results are processed in a cloud service.\n\nIf you disable this policy, users can receive related matches in Find on Page on limited sites. The results are processed on the user's device.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#relatedmatchescloudserviceenabled"
RelaunchNotification_Policy="Notify a user that a browser restart is recommended or required for pending updates"
RelaunchNotification_Explain="Notify users that they need to restart Microsoft Edge to apply a pending update.\n\nIf you don't configure this policy, Microsoft Edge adds a recycle icon at the far right of the top menu bar to prompt users to restart the browser to apply the update.\n\nIf you enable this policy and set it to 'Recommended', a recurring warning prompts users that a restart is recommended. Users can dismiss this warning and defer the restart.\n\nIf you set the policy to 'Required', a recurring warning prompts users that the browser will be restarted automatically as soon as a notification period passes. The default period is seven days. You can configure this period with the 'RelaunchNotificationPeriod' (Angi tidsperioden for oppdateringsvarsler) policy.\n\nThe user's session is restored when the browser restarts.\n\nPolicy options mapping:\n\n* Recommended (1) = Recommended - Show a recurring prompt to the user indicating that a restart is recommended\n\n* Required (2) = Required - Show a recurring prompt to the user indicating that a restart is required\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#relaunchnotification"
RelaunchNotification_Part="Notify a user that a browser restart is recommended or required for pending updates"
RelaunchNotification_Recommended_DropDown="Recommended - Show a recurring prompt to the user indicating that a restart is recommended"
RelaunchNotification_Required_DropDown="Required - Show a recurring prompt to the user indicating that a restart is required"
RelaunchNotificationPeriod_Policy="Angi tidsperioden for oppdateringsvarsler"
RelaunchNotificationPeriod_Explain="Allows you to set the time period, in milliseconds, over which users are notified that Microsoft Edge must be relaunched to apply a pending update.\n\nOver this time period, the user will be repeatedly informed of the need for an update. In Microsoft Edge the app menu changes to indicate that a relaunch is needed once one third of the notification period passes. This notification changes color once two thirds of the notification period passes, and again once the full notification period has passed. The additional notifications enabled by the 'RelaunchNotification' (Notify a user that a browser restart is recommended or required for pending updates) policy follow this same schedule.\n\nIf not set, the default period of 604800000 milliseconds (one week) is used.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#relaunchnotificationperiod"
RelaunchNotificationPeriod_Part="Angi tidsperioden for oppdateringsvarsler"
RelaunchWindow_Policy="Set the time interval for relaunch"
RelaunchWindow_Explain="Specifies a target time window for the end of the relaunch notification period.\n\nUsers are notified of the need for a browser relaunch or device restart based on the 'RelaunchNotification' (Notify a user that a browser restart is recommended or required for pending updates) and 'RelaunchNotificationPeriod' (Angi tidsperioden for oppdateringsvarsler) policy settings. Browsers and devices are forcibly restarted at the end of the notification period when the 'RelaunchNotification' policy is set to 'Required'. This RelaunchWindow policy can be used to defer the end of the notification period so that it falls within a specific time window.\n\nIf you don't configure this policy, the default target time window is the whole day (i.e., the end of the notification period is never deferred).\n\nNote: Though the policy can accept multiple items in entries, all but the first item are ignored.\nWarning: Setting this policy may delay application of software updates.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#relaunchwindow"
RelaunchWindow_Part="Relaunch time window"
RemoteDebuggingAllowed_Policy="Allow remote debugging"
RemoteDebuggingAllowed_Explain="Controls whether users may use remote debugging.\n\nIf you enable or don't configure this policy, users may use remote debugging by specifying --remote-debug-port and --remote-debugging-pipe command line switches.\n\nIf you disable this policy, users are not allowed to use remote debugging.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#remotedebuggingallowed"
RendererAppContainerEnabled_Policy="Enable renderer in app container"
RendererAppContainerEnabled_Explain="Launches Renderer processes into an App Container for\nadditional security benefits.\n\nIf you don't configure this policy, Microsoft Edge will launch the renderer process in an app\ncontainer in a future update.\n\nIf you enable this policy, Microsoft Edge will launch the renderer process in an app container.\n\nIf you disable this policy, Microsoft Edge will not launch the renderer process in an app container.\n\nOnly turn off the policy if there are compatibility issues with\nthird-party software that must run inside Microsoft Edge's renderer processes.\n\nThis policy is only supported on Windows 10 devices.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#rendererappcontainerenabled"
RendererCodeIntegrityEnabled_Policy="Enable renderer code integrity"
RendererCodeIntegrityEnabled_Explain="Setting the policy to Enabled or leaving it unset turns Renderer Code Integrity on.\nSetting the policy to Disabled has a detrimental effect on Microsoft Edge's security and stability as unknown and potentially hostile code can load inside Microsoft Edge's renderer processes. Only turn off the policy if there are compatibility issues with third-party software that must run inside Microsoft Edge's renderer processes.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#renderercodeintegrityenabled"
RequireOnlineRevocationChecksForLocalAnchors_Policy="Specify if online OCSP/CRL checks are required for local trust anchors"
RequireOnlineRevocationChecksForLocalAnchors_Explain="Control whether online revocation checks (OCSP/CRL checks) are required. If Microsoft Edge can't get revocation status information, these certificates are treated as revoked ("hard-fail").\n\nIf you enable this policy, Microsoft Edge always performs revocation checking for server certificates that successfully validate and are signed by locally-installed CA certificates.\n\nIf you don't configure or disable this policy, then Microsoft Edge uses the existing online revocation checking settings.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#requireonlinerevocationchecksforlocalanchors"
ResolveNavigationErrorsUseWebService_Policy="Enable resolution of navigation errors using a web service"
ResolveNavigationErrorsUseWebService_Explain="Allow Microsoft Edge to issue a dataless connection to a web service to probe networks for connectivity in cases like hotel and airport Wi-Fi.\n\nIf you enable this policy, a web service is used for network connectivity tests.\n\nIf you disable this policy, Microsoft Edge uses native APIs to try to resolve network connectivity and navigation issues.\n\n**Note**: Except on Windows 8 and later versions of Windows, Microsoft Edge *always* uses native APIs to resolve connectivity issues.\n\nIf you don't configure this policy, Microsoft Edge respects the user preference that's set under Services at edge://settings/privacy.\nSpecifically, there's a **Use a web service to help resolve navigation errors** toggle, which the user can switch on or off. Be aware that if you have enabled this policy (ResolveNavigationErrorsUseWebService), the **Use a web service to help resolve navigation errors** setting is turned on, but the user can't change the setting by using the toggle. If you have disabled this policy, the **Use a web service to help resolve navigation errors** setting is turned off, and the user can't change the setting by using the toggle.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#resolvenavigationerrorsusewebservice"
RestrictSigninToPattern_Policy="Restrict which accounts can be used to sign in to Microsoft Edge"
RestrictSigninToPattern_Explain="Determines which accounts can be used to sign in to the Microsoft Edge account that's chosen during the Sync opt-in flow.\n\nYou can configure this policy to match multiple accounts using a Perl style regular expression for the pattern. If a user tries to sign in to the browser with an account whose username doesn't match this pattern, they are blocked and will get the appropriate error message. Note that pattern matches are case sensitive. For more information about the regular expression rules that are used, refer to https://go.microsoft.com/fwlink/p/?linkid=2133903.\n\nIf you don't configure this policy or leave it blank, users can use any account to sign in to Microsoft Edge.\n\nNote that signed-in profiles with a username that doesn't match this pattern will be signed out after this policy is enabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#restrictsignintopattern"
RestrictSigninToPattern_Part="Restrict which accounts can be used to sign in to Microsoft Edge"
RoamingProfileLocation_Policy="Angir katalogen for roamingprofiler"
RoamingProfileLocation_Explain="Configures the directory to use to store the roaming copy of profiles.\n\nIf you enable this policy, Microsoft Edge uses the provided directory to store a roaming copy of the profiles, as long as you've also enabled the 'RoamingProfileSupportEnabled' (Enable using roaming copies for Microsoft Edge profile data) policy. If you disable the 'RoamingProfileSupportEnabled' policy or don't configure it, the value stored in this policy isn't used.\n\nSee https://go.microsoft.com/fwlink/?linkid=2095041 for a list of variables you can use.\n\nIf you don't configure this policy, the default roaming profile path is used.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#roamingprofilelocation"
RoamingProfileLocation_Part="Angir katalogen for roamingprofiler"
RoamingProfileSupportEnabled_Policy="Enable using roaming copies for Microsoft Edge profile data"
RoamingProfileSupportEnabled_Explain="Enable this policy to use roaming profiles on Windows. The settings stored in Microsoft Edge profiles (favorites and preferences) are also saved to a file stored in the Roaming user profile folder (or the location specified by the administrator through the 'RoamingProfileLocation' (Angir katalogen for roamingprofiler) policy).\n\nIf you disable this policy or don't configure it, only the regular local profiles are used.\n\nThe 'SyncDisabled' (Disable synchronization of data using Microsoft sync services) only disables cloud synchronization and has no impact on this policy.\n\nSee https://go.microsoft.com/fwlink/?linkid=2150058 for more information on using roaming user profiles.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#roamingprofilesupportenabled"
RunAllFlashInAllowMode_Policy="Extend Adobe Flash content setting to all content (obsolete)"
RunAllFlashInAllowMode_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 88.\n\nThis policy doesn't work because Flash is no longer supported by Microsoft Edge.\n\nIf you enable this policy, all Adobe Flash content embedded in websites that are set to allow Adobe Flash in the content settings -- either by the user or by enterprise policy -- will run. This includes content from other origins and/or small content.\n\nTo control which websites are allowed to run Adobe Flash, see the specifications in the 'DefaultPluginsSetting' (Standard Adobe Flash-innstilling), 'PluginsAllowedForUrls' (Allow the Adobe Flash plug-in on specific sites), and 'PluginsBlockedForUrls' (Block the Adobe Flash plug-in on specific sites) policies.\n\nIf you disable this policy or don't configure it, Adobe Flash content from other origins (from sites that aren't specified in the three policies mentioned immediately above) or small content might be blocked.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#runallflashinallowmode"
SSLErrorOverrideAllowed_Policy="Allow users to proceed from the HTTPS warning page"
SSLErrorOverrideAllowed_Explain="Microsoft Edge shows a warning page when users visit sites that have SSL errors.\n\nIf you enable or don't configure (default) this policy, users can click through these warning pages.\n\nIf you disable this policy, users are blocked from clicking through any warning page.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sslerroroverrideallowed"
SSLErrorOverrideAllowedForOrigins_Policy="Allow users to proceed from the HTTPS warning page for specific origins"
SSLErrorOverrideAllowedForOrigins_Explain="Microsoft Edge shows a warning page when users visit sites that have SSL errors.\n\nIf you enable or don't configure the 'SSLErrorOverrideAllowed' (Allow users to proceed from the HTTPS warning page) policy, this policy does nothing.\n\nIf you disable the 'SSLErrorOverrideAllowed' policy, configuring this policy lets you configure a list of origin patterns for sites where users can continue to click through SSL error pages. Users can't click through SSL error pages on origins that are not on this list.\n\nIf you don't configure this policy, the 'SSLErrorOverrideAllowed' policy applies for all sites.\n\nFor detailed information about valid origin patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. * is not an accepted value for this policy. This policy only matches based on origin, so any path or query in the URL pattern is ignored.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sslerroroverrideallowedfororigins"
SSLErrorOverrideAllowedForOrigins_Part="Allow users to proceed from the HTTPS warning page for specific origins"
SSLVersionMin_Policy="Minimum TLS version enabled"
SSLVersionMin_Explain="Sets the minimum supported version of TLS.\n\nIf you set this policy to 'tls1.2', Microsoft Edge will show an error for TLS 1.0 and TLS 1.1 and the user will not be able to bypass the error.\n\nIf you don't configure this policy, Microsoft Edge will still show an error for TLS 1.0 and TLS 1.1 but the user will be able to bypass it.\n\nSupport for suppressing the TLS 1.0/1.1 warning was removed from Microsoft Edge starting in version 91. The 'tls1' and 'tls1.1' values are no longer supported.\n\nPolicy options mapping:\n\n* TLSv1 (tls1) = TLS 1.0\n\n* TLSv1.1 (tls1.1) = TLS 1.1\n\n* TLSv1.2 (tls1.2) = TLS 1.2\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sslversionmin"
SSLVersionMin_Part="Minimum TLS version enabled"
SSLVersionMin_TLSv1_DropDown="TLS 1.0"
SSLVersionMin_TLSv1_1_DropDown="TLS 1.1"
SSLVersionMin_TLSv1_2_DropDown="TLS 1.2"
SandboxExternalProtocolBlocked_Policy="Allow Microsoft Edge to block navigations to external protocols in a sandboxed iframe"
SandboxExternalProtocolBlocked_Explain="Microsoft Edge will block navigations to external protocols inside a\nsandboxed iframe.\n\nIf you enable or don't configure this policy, Microsoft Edge will block those navigations.\n\nIf you disable this policy, Microsoft Edge will not block those navigations.\n\nThis can be used by administrators who need more time to update their internal website affected by this new restriction. This Enterprise policy is temporary; it's intended to be removed after Microsoft Edge version 117.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sandboxexternalprotocolblocked"
SaveCookiesOnExit_Policy="Save cookies when Microsoft Edge closes"
SaveCookiesOnExit_Explain="When this policy is enabled, the specified set of cookies is exempt from deletion when the browser closes. This policy is only effective when:\n- The 'Cookies and other site data' toggle is configured in Settings/Privacy and services/Clear browsing data on close or\n- The policy 'ClearBrowsingDataOnExit' (Clear browsing data when Microsoft Edge closes) is enabled or\n- The policy 'DefaultCookiesSetting' (Configure cookies) is set to 'Keep cookies for the duration of the session'.\n\nYou can define a list of sites, based on URL patterns, that will have their cookies preserved across sessions.\n\nNote: Users can still edit the cookie site list to add or remove URLs. However, they can't remove URLs that have been added by an Admin.\n\nIf you enable this policy, the list of cookies won't be cleared when the browser closes.\n\nIf you disable or don't configure this policy, the user's personal configuration is used.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#savecookiesonexit"
SaveCookiesOnExit_Part="Save cookies when Microsoft Edge closes"
SavingBrowserHistoryDisabled_Policy="Deaktiver lagring av nettleserlogg"
SavingBrowserHistoryDisabled_Explain="Disables saving browser history and prevents users from changing this setting.\n\nIf you enable this policy, browsing history isn't saved. This also disables tab syncing.\n\nIf you disable this policy or don't configure it, browsing history is saved.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#savingbrowserhistorydisabled"
ScreenCaptureAllowed_Policy="Allow or deny screen capture"
ScreenCaptureAllowed_Explain="If you enable this policy, or don't configure this policy, a web page can use screen-share APIs (for example, getDisplayMedia() or the Desktop Capture extension API) for a screen capture.\nIf you disable this policy, calls to screen-share APIs will fail. For example, if you're using a web-based online meeting, video or screen sharing will not work.  However, this policy is not considered\n(and a site will be allowed to use screen-share APIs) if the site matches an origin pattern in any of the following policies:\n'ScreenCaptureAllowedByOrigins' (Allow Desktop, Window, and Tab capture by these origins),\n'WindowCaptureAllowedByOrigins' (Allow Window and Tab capture by these origins),\n'TabCaptureAllowedByOrigins' (Allow Tab capture by these origins),\n'SameOriginTabCaptureAllowedByOrigins' (Allow Same Origin Tab capture by these origins).\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#screencaptureallowed"
ScrollToTextFragmentEnabled_Policy="Enable scrolling to text specified in URL fragments"
ScrollToTextFragmentEnabled_Explain="This feature lets hyperlink and address bar URL navigations target specific text on a web page, which will be scrolled to after the web page finishes loading.\n\nIf you enable or don't configure this policy, web page scrolling to specific text fragments via a URL will be enabled.\n\nIf you disable this policy, web page scrolling to specific text fragments via a URL will be disabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#scrolltotextfragmentenabled"
SearchSuggestEnabled_Policy="Aktiver søkeforslag"
SearchSuggestEnabled_Explain="Enables web search suggestions in Microsoft Edge's Address Bar and Auto-Suggest List and prevents users from changing this policy.\n\nIf you enable this policy, web search suggestions are used.\n\nIf you disable this policy, web search suggestions are never used, however local history and local favorites suggestions still appear. If you disable this policy, neither the typed characters, nor the URLs visited will be included in telemetry to Microsoft.\n\nIf this policy is left not set, search suggestions are enabled but the user can change that.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#searchsuggestenabled"
SecurityKeyPermitAttestation_Policy="Websites or domains that don't need permission to use direct Security Key attestation"
SecurityKeyPermitAttestation_Explain="Specifies websites and domains that don't need explicit user permission when attestation certificates from security keys are requested. Additionally, a signal is sent to the security key indicating that it can use individual attestation. Without this, users are prompted each time a site requests attestation of security keys.\n\nSites (like https://contoso.com/some/path) only match as U2F appIDs. Domains (like contoso.com) only match as webauthn RP IDs. To cover both U2F and webauthn APIs for a given site, you need to list both the appID URL and domain.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#securitykeypermitattestation"
SecurityKeyPermitAttestation_Part="Websites or domains that don't need permission to use direct Security Key attestation"
SendIntranetToInternetExplorer_Policy="Send all intranet sites to Internet Explorer"
SendIntranetToInternetExplorer_Explain="For guidance about configuring the optimal experience for Internet Explorer mode see https://go.microsoft.com/fwlink/?linkid=2094210\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sendintranettointernetexplorer"
SendSiteInfoToImproveServices_Policy="Send site information to improve Microsoft services (obsolete)"
SendSiteInfoToImproveServices_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 88.\n\nThis policy is no longer supported. It is replaced by 'DiagnosticData' (Send required and optional diagnostic data about browser usage) (for Windows 7, Windows 8, and macOS) and Allow Telemetry on Win 10 (https://go.microsoft.com/fwlink/?linkid=2099569).\n\nThis policy enables sending info about websites visited in Microsoft Edge to Microsoft to improve services like search.\n\nEnable this policy to send info about websites visited in Microsoft Edge to Microsoft. Disable this policy to not send info about websites visited in Microsoft Edge to Microsoft. In both cases, users can't change or override the setting.\n\nOn Windows 10, if you don't configure this policy, Microsoft Edge will default to the Windows diagnostic data setting. If this policy is enabled Microsoft Edge will only send info about websites visited in Microsoft Edge if the Windows Diagnostic data setting is set to Full. If this policy is disabled Microsoft Edge will not send info about websites visited. Learn more about Windows Diagnostic data settings: https://go.microsoft.com/fwlink/?linkid=2099569\n\nOn Windows 7, windows 8, and macOS this policy controls sending info about websites visited. If you don't configure this policy, Microsoft Edge will default to the user's preference.\n\nTo enable this policy, 'MetricsReportingEnabled' (Enable usage and crash-related data reporting) must be set to Enabled. If 'SendSiteInfoToImproveServices' (Send site information to improve Microsoft services) or 'MetricsReportingEnabled' is Not Configured or Disabled, this data will not be sent to Microsoft.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sendsiteinfotoimproveservices"
SensorsAllowedForUrls_Policy="Allow access to sensors on specific sites"
SensorsAllowedForUrls_Explain="Define a list of sites, based on URL patterns, that can access and use sensors such as motion and light sensors.\n\nIf you don't configure this policy, the global default value from the 'DefaultSensorsSetting' (Default sensors setting) policy (if set) or the user's personal configuration is used for all sites.\n\nFor URL patterns that don't match this policy, the following order of precedence is used: The 'SensorsBlockedForUrls' (Block access to sensors on specific sites) policy (if there is a match), the 'DefaultSensorsSetting' policy (if set), or the user's personal settings.\n\nThe URL patterns defined in this policy can't conflict with those configured in the 'SensorsBlockedForUrls' policy. You can't allow and block a URL.\n\nFor detailed information about valid URL patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sensorsallowedforurls"
SensorsAllowedForUrls_Part="Allow access to sensors on specific sites"
SensorsBlockedForUrls_Policy="Block access to sensors on specific sites"
SensorsBlockedForUrls_Explain="Define a list of sites, based on URL patterns, that can't access sensors such as motion and light sensors.\n\nIf you don't configure this policy, the global default value from the 'DefaultSensorsSetting' (Default sensors setting) policy (if set) or the user's personal configuration is used for all sites.\n\nFor URL patterns that don't match this policy, the following order of precedence is used: The 'SensorsAllowedForUrls' (Allow access to sensors on specific sites) policy (if there is a match), the 'DefaultSensorsSetting' policy (if set), or the user's personal settings.\n\nThe URL patterns defined in this policy can't conflict with those configured in the 'SensorsAllowedForUrls' policy. You can't allow and block a URL.\n\nFor detailed information about valid URL patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sensorsblockedforurls"
SensorsBlockedForUrls_Part="Block access to sensors on specific sites"
SerialAskForUrls_Policy="Allow the Serial API on specific sites"
SerialAskForUrls_Explain="Define a list of sites, based on URL patterns, that can ask the user for access to a serial port.\n\nIf you don't configure this policy, the global default value from the 'DefaultSerialGuardSetting' (Control use of the Serial API) policy (if set) or the user's personal configuration is used for all sites.\n\nFor URL patterns that don't match this policy, the following order of precedence is used: The 'SerialBlockedForUrls' (Block the Serial API on specific sites) policy (if there is a match), the 'DefaultSerialGuardSetting' policy (if set), or the user's personal settings.\n\nThe URL patterns defined in this policy can't conflict with those configured in the 'SerialBlockedForUrls' policy. You can't allow and block a URL.\n\nFor detailed information about valid url patterns, please see https://go.microsoft.com/fwlink/?linkid=2095322.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#serialaskforurls"
SerialAskForUrls_Part="Allow the Serial API on specific sites"
SerialBlockedForUrls_Policy="Block the Serial API on specific sites"
SerialBlockedForUrls_Explain="Define a list of sites, based on URL patterns, that can't ask the user to grant them access to a serial port.\n\nIf you don't configure this policy, the global default value from the 'DefaultSerialGuardSetting' (Control use of the Serial API) policy (if set) or the user's personal configuration is used for all sites.\n\nFor URL patterns that don't match this policy, the following order of precedence is used: The 'SerialAskForUrls' (Allow the Serial API on specific sites) policy (if there is a match), the 'DefaultSerialGuardSetting' policy (if set), or the user's personal settings.\n\nThe URL patterns in this policy can't conflict with those configured in the 'SerialAskForUrls' policy. You can't allow and block a URL.\n\nFor detailed information about valid URL patterns, see https://go.microsoft.com/fwlink/?linkid=2095322.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#serialblockedforurls"
SerialBlockedForUrls_Part="Block the Serial API on specific sites"
SetTimeoutWithout1MsClampEnabled_Policy="Control Javascript setTimeout() function minimum timeout (deprecated)"
SetTimeoutWithout1MsClampEnabled_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nWhen the policy is set to Enabled, the Javascript setTimeout() with a timeout of 0ms will no longer be fixed to 1ms to schedule timer-based callbacks.\nWhen the policy is set to Disabled, the Javascript setTimeout() with a timeout of 0ms will be fixed to 1ms to schedule timer-based callbacks.\nWhen the policy is unset, use the browser's default behavior for setTimeout() function.\n\nThis is a web standards compliancy feature, but it may change task ordering on a web page, leading to unexpected behavior on sites that are dependent on a certain ordering.\nIt also may affect sites with a lot of setTimeout()s with a timeout of 0ms usage. For example, increasing CPU load.\n\nFor users where this policy is unset, Microsoft Edge Stable will roll out the change gradually on the stable channel.\n\nThis is a temporary policy that is planned to be removed in Microsoft Edge Stable 105.\nThis deadline may be extended if there is a need for enterprises.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#settimeoutwithout1msclampenabled"
ShadowStackCrashRollbackBehavior_Policy="Configure ShadowStack crash rollback behavior"
ShadowStackCrashRollbackBehavior_Explain="Microsoft Edge includes a Hardware-enforced Stack Protection security feature. This feature may result in the browser crashing unexpectedly in cases that do not represent an attempt to compromise the browser's security.\n\nUsing this policy, you may control the behavior of the Hardware-enforced Stack Protection feature after a crash triggered by this feature is encountered.\n\nSet this policy to 'Disable' to disable the feature.\n\nSet this policy to 'DisableUntilUpdate' to disable the feature until Microsoft Edge updates next time.\n\nSet this policy to 'Enable' to keep the feature enabled.\n\nPolicy options mapping:\n\n* Disable (0) = Disable Hardware-enforced Stack Protection\n\n* DisableUntilUpdate (1) = Disable Hardware-enforced Stack Protection until the next Microsoft Edge update\n\n* Enable (2) = Enable Hardware-enforced Stack Protection\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#shadowstackcrashrollbackbehavior"
ShadowStackCrashRollbackBehavior_Part="Configure ShadowStack crash rollback behavior"
ShadowStackCrashRollbackBehavior_Disable_DropDown="Disable Hardware-enforced Stack Protection"
ShadowStackCrashRollbackBehavior_DisableUntilUpdate_DropDown="Disable Hardware-enforced Stack Protection until the next Microsoft Edge update"
ShadowStackCrashRollbackBehavior_Enable_DropDown="Enable Hardware-enforced Stack Protection"
SharedArrayBufferUnrestrictedAccessAllowed_Policy="Specifies whether SharedArrayBuffers can be used in a non cross-origin-isolated context"
SharedArrayBufferUnrestrictedAccessAllowed_Explain="Specifies whether SharedArrayBuffers can be used in a non cross-origin-isolated context.  A SharedArrayBuffer is a binary data buffer that can be used to create views on shared memory.  SharedArrayBuffers have a memory access vulnerability in several popular CPUs.\n\nIf you enable this policy, sites are allowed to use SharedArrayBuffers with no restrictions.\n\nIf you disable or don't configure this policy, sites are allowed to use SharedArrayBuffers only when cross-origin isolated.\n\nMicrosoft Edge will require cross-origin isolation when using SharedArrayBuffers from Microsoft Edge 91 onward for Web Compatibility reasons.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sharedarraybufferunrestrictedaccessallowed"
SharedLinksEnabled_Policy="Show links shared from Microsoft 365 apps in History"
SharedLinksEnabled_Explain="Allows Microsoft Edge to display links recently shared by or shared with the user from Microsoft 365 apps in History.\n\nIf you enable or don't configure this policy, Microsoft Edge displays links recently shared by or shared with the user from Microsoft 365 apps in History.\n\nIf you disable this policy, Microsoft Edge does not display links recently shared by or shared with the user from Microsoft 365 apps in History. The control in Microsoft Edge settings is disabled and set to off.\n\nThis policy only applies for Microsoft Edge local user profiles and profiles signed in using Azure Active Directory.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sharedlinksenabled"
ShowMicrosoftRewards_Policy="Show Microsoft Rewards experiences"
ShowMicrosoftRewards_Explain="Show Microsoft Rewards experience and notifications.\nIf you enable this policy:\n   - Microsoft account users (excludes Azure AD accounts) in search and earn markets will see the Microsoft Rewards experience in their Microsoft Edge user profile.\n   - The setting to enable Microsoft Rewards in Microsoft Edge settings will be enabled and toggled on.\n\nIf you disable this policy:\n   - Microsoft account users (excludes Azure AD accounts) in search and earn markets will not see the Microsoft Rewards experience in their Microsoft Edge user profile.\n   - The setting to enable Microsoft Rewards in Microsoft Edge settings will be disabled and toggled off.\n\nIf you don't configure this policy:\n   - Microsoft account users (excludes Azure AD accounts) in search and earn markets will see the Microsoft Rewards experience in their Microsoft Edge user profile.\n   - The setting to enable Microsoft Rewards in Microsoft Edge settings will be enabled and toggled on.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#showmicrosoftrewards"
ShowOfficeShortcutInFavoritesBar_Policy="Show Microsoft Office shortcut in favorites bar (deprecated)"
ShowOfficeShortcutInFavoritesBar_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nThis policy didn't work as expected due to changes in operational requirements. Therefore it's deprecated and should not be used.\n\nSpecifies whether to include a shortcut to Office.com in the favorites bar. For users signed into Microsoft Edge the shortcut takes users to their Microsoft Office apps and docs.\n  If you enable or don't configure this policy, users can choose whether to see the shortcut by changing the toggle in the favorites bar context menu.\n  If you disable this policy, the shortcut isn't shown.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#showofficeshortcutinfavoritesbar"
ShowRecommendationsEnabled_Policy="Allow recommendations and promotional notifications from Microsoft Edge"
ShowRecommendationsEnabled_Explain="This policy setting lets you decide whether employees should receive recommendations and in-product assistance notifications from Microsoft Edge.\n\nIf you enable or don't configure this setting, employees receive recommendations / notifications from Microsoft Edge.\n\nIf you disable this setting, employees will not receive any recommendations / notifications from Microsoft Edge.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#showrecommendationsenabled"
SignedHTTPExchangeEnabled_Policy="Slå på støtte for signerte HTTP-utvekslinger (SXG)"
SignedHTTPExchangeEnabled_Explain="Enable support for Signed HTTP Exchange (SXG).\n\nIf this policy isn't set or enabled, Microsoft Edge will accept web contents served as Signed HTTP Exchanges.\n\nIf this policy is set to disabled, Signed HTTP Exchanges can't be loaded.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#signedhttpexchangeenabled"
SitePerProcess_Policy="Enable site isolation for every site"
SitePerProcess_Explain="The 'SitePerProcess' policy can be used to prevent users from opting out of the default behavior of isolating all sites. Note that you can also use the 'IsolateOrigins' (Enable site isolation for specific origins) policy to isolate additional, finer-grained origins.\n\nIf you enable this policy, users can't opt out of the default behavior where each site runs in its own process.\n\nIf you disable or don't configure this policy, a user can opt out of site isolation.  (For example, by using "Disable site isolation" entry in edge://flags.)  Disabling the policy or not configuring the policy doesn't turn off Site Isolation.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#siteperprocess"
SiteSafetyServicesEnabled_Policy="Allow users to configure Site safety services"
SiteSafetyServicesEnabled_Explain="This policy disables site safety services from showing top site info in the page info dialog.\n\nIf you enable this policy or don't configure it, the top site info will be shown.\n\nIf you disable this policy, the top site info will not be shown.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#sitesafetyservicesenabled"
SmartActionsBlockList_Policy="Block smart actions for a list of services"
SmartActionsBlockList_Explain="List specific services, such as PDFs, that don't show smart actions. (Smart actions are actions like "define" which are available in full and mini context menus in Microsoft Edge.)\n\nIf you enable the policy:\n   - The smart action in the mini and full context menu will be disabled for all profiles for services that match the given list.\n   - Users will not see the smart action in the mini and full context menu on text selection for services that match the given list.\n   - In Microsoft Edge settings, the smart action in the mini and full context menu will be disabled for services that match the given list.\n\nIf you disable or don't configure this policy:\n   - The smart action in the mini and full context menu will be enabled for all profiles.\n   - Users will see the smart action in the mini and full context menu on text selection.\n   - In Microsoft Edge settings, the smart action in the mini and full context menu will be enabled.\n\nPolicy options mapping:\n\n* smart_actions_pdf (smart_actions_pdf) = Smart actions in PDF\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#smartactionsblocklist"
SmartActionsBlockList_Part="Block smart actions for a list of services"
SpeechRecognitionEnabled_Policy="Configure Speech Recognition"
SpeechRecognitionEnabled_Explain="Set whether websites can use the W3C Web Speech API to recognize speech from the user. The Microsoft Edge implementation of the Web Speech API uses Azure Cognitive Services, so voice data will leave the machine.\n\nIf you enable or don't configure this policy, web-based applications that use the Web Speech API can use Speech Recognition.\n\nIf you disable this policy, Speech Recognition is not available through the Web Speech API.\n\nRead more about this feature here:\nSpeechRecognition API: https://go.microsoft.com/fwlink/?linkid=2143388\nCognitive Services: https://go.microsoft.com/fwlink/?linkid=2143680\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#speechrecognitionenabled"
SpellcheckEnabled_Policy="Aktiver stavekontrollen"
SpellcheckEnabled_Explain="If you enable or don't configure this policy, the user can use spellcheck.\n\nIf you disable this policy, the user can't use spellcheck and the 'SpellcheckLanguage' (Enable specific spellcheck languages) and 'SpellcheckLanguageBlocklist' (Tving deaktivering av stavekontroll for bestemte språk) policies are also disabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#spellcheckenabled"
SpellcheckLanguage_Policy="Enable specific spellcheck languages"
SpellcheckLanguage_Explain="Enables different languages for spellcheck. Any language that you specify that isn't recognized is ignored.\n\nIf you enable this policy, spellcheck is enabled for the languages specified, as well as any languages the user has enabled.\n\nIf you don't configure or disable this policy, there's no change to the user's spellcheck preferences.\n\nIf the 'SpellcheckEnabled' (Aktiver stavekontrollen) policy is disabled, this policy will have no effect.\n\nIf a language is included in both the 'SpellcheckLanguage' and the 'SpellcheckLanguageBlocklist' (Tving deaktivering av stavekontroll for bestemte språk) policy, the spellcheck language is enabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#spellchecklanguage"
SpellcheckLanguage_Part="Enable specific spellcheck languages"
SpellcheckLanguageBlocklist_Policy="Tving deaktivering av stavekontroll for bestemte språk"
SpellcheckLanguageBlocklist_Explain="Force-disables spellcheck languages. Unrecognized languages in that list will be ignored.\n\nIf you enable this policy, spellcheck will be disabled for the languages specified. The user can still enable or disable spellcheck for languages not in the list.\n\nIf you do not set this policy, or disable it, there will be no change to the user's spellcheck preferences.\n\nIf the 'SpellcheckEnabled' (Aktiver stavekontrollen) policy is set to disabled, this policy will have no effect.\n\nIf a language is included in both the 'SpellcheckLanguage' (Enable specific spellcheck languages) and the 'SpellcheckLanguageBlocklist' policy, the spellcheck language is enabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#spellchecklanguageblocklist"
SpellcheckLanguageBlocklist_Part="Tving deaktivering av stavekontroll for bestemte språk"
StricterMixedContentTreatmentEnabled_Policy="Enable stricter treatment for mixed content (obsolete)"
StricterMixedContentTreatmentEnabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 84.\n\nThis policy doesn't work because it was only intended to be a short-term mechanism to give enterprises more time to update their web content if it was found to be incompatible with stricter mixed content treatment.\n\nThis policy controls the treatment for mixed content (HTTP content in HTTPS sites) in the browser.\n\nIf you set this policy to true or not set, audio and video mixed content will be automatically upgraded to HTTPS (that is, the URL will be rewritten as HTTPS, without a fallback if the resource isn't available over HTTPS) and a 'Not Secure' warning will be shown in the URL bar for image mixed content.\n\nIf you set the policy to false, auto upgrades will be disabled for audio and video, and no warning will be shown for images.\n\nThis policy does not affect other types of mixed content other than audio, video, and images.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#strictermixedcontenttreatmentenabled"
SuppressUnsupportedOSWarning_Policy="Ignorer advarselen om at operativsystemet ikke støttes"
SuppressUnsupportedOSWarning_Explain="Suppresses the warning that appears when Microsoft Edge is running on a computer or operating system that is no longer supported.\n\nIf this policy is false or unset, the warnings will appear on such unsupported computers or operating systems.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#suppressunsupportedoswarning"
SyncDisabled_Policy="Disable synchronization of data using Microsoft sync services"
SyncDisabled_Explain="Disables data synchronization in Microsoft Edge. This policy also prevents the sync consent prompt from appearing.\n\nThis policy disables cloud synchronization only and has no impact on the 'RoamingProfileSupportEnabled' (Enable using roaming copies for Microsoft Edge profile data) policy.\n\nIf you don't set this policy or apply it as recommended, users will be able to turn sync on or off. If you apply this policy as mandatory, users will not be able to turn sync on.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#syncdisabled"
SyncTypesListDisabled_Policy="Configure the list of types that are excluded from synchronization"
SyncTypesListDisabled_Explain="If you enable this policy all the specified data types will be excluded from synchronization. This policy can be used to limit the type of data uploaded to the Microsoft Edge synchronization service.\n\nYou can provide one of the following data types for this policy: "favorites", "settings", "passwords", "addressesAndMore", "extensions", "history", "openTabs", and "collections". The "apps" data type will be supported starting in Microsoft Edge version 100. Note that these data type names are case sensitive.\n\nUsers will not be able to override the disabled data types.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#synctypeslistdisabled"
SyncTypesListDisabled_Part="Configure the list of types that are excluded from synchronization"
TLS13HardeningForLocalAnchorsEnabled_Policy="Enable a TLS 1.3 security feature for local trust anchors (obsolete)"
TLS13HardeningForLocalAnchorsEnabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 85.\n\nThis policy doesn't work because it was only intended to be a short-term mechanism to give enterprises more time to upgrade affected proxies.\n\nThis policy controls a security feature in TLS 1.3 that protects connections against downgrade attacks. It is backwards-compatible and will not affect connections to compliant TLS 1.2 servers or proxies. However, older versions of some TLS-intercepting proxies have an implementation flaw which causes them to be incompatible.\n\nIf you enable this policy or don't set it, Microsoft Edge will enable these security protections for all connections.\n\nIf you disable this policy, Microsoft Edge will disable these security protections for connections authenticated with locally-installed CA certificates. These protections are always enabled for connections authenticated with publicly-trusted CA certificates.\n\nThis policy can be used to test for any affected proxies and upgrade them. Affected proxies are expected to fail connections with an error code of ERR_TLS13_DOWNGRADE_DETECTED.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#tls13hardeningforlocalanchorsenabled"
TLSCipherSuiteDenyList_Policy="Specify the TLS cipher suites to disable"
TLSCipherSuiteDenyList_Explain="Configure the list of cipher suites that are disabled for TLS connections.\n\nIf you configure this policy, the list of configured cipher suites will not be used when establishing TLS connections.\n\nIf you don't configure this policy, the browser will choose which TLS cipher suites to use.\n\nCipher suite values to be disabled are specified as 16-bit hexadecimal values. The values are assigned by the Internet Assigned Numbers Authority (IANA) registry.\n\nThe TLS 1.3 cipher suite TLS_AES_128_GCM_SHA256 (0x1301) is required for TLS 1.3 and can't be disabled by this policy.\n\nThis policy does not affect QUIC-based connections. QUIC can be turned off via the 'QuicAllowed' (Tillat QUIC-protokollen) policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#tlsciphersuitedenylist"
TLSCipherSuiteDenyList_Part="Specify the TLS cipher suites to disable"
TabFreezingEnabled_Policy="Allow freezing of background tabs (obsolete)"
TabFreezingEnabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 86.\n\nThis policy doesn't work, use 'SleepingTabsEnabled' (Configure sleeping tabs) instead.\n\nControls whether Microsoft Edge can freeze tabs that are in the background for at least 5 minutes.\n\nTab freezing reduces CPU, battery, and memory usage. Microsoft Edge uses heuristics to avoid freezing tabs that do useful work in the background, such as display notifications, play sound, and stream video.\n\nIf you enable or don't configure this policy, tabs that have been in the background for at least 5 minutes might be frozen.\n\nIf you disable this policy, no tabs will be frozen.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#tabfreezingenabled"
TargetBlankImpliesNoOpener_Policy="Do not set window.opener for links targeting _blank"
TargetBlankImpliesNoOpener_Explain="If you enable this policy or leave it unset, the window.opener property is set to null unless the anchor specifies rel="opener".\n\nIf you disable this policy, popups that target _blank are permitted to access (via JavaScript) the page that requested to open the popup.\n\nThis policy will be obsoleted in Microsoft Edge version 95.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#targetblankimpliesnoopener"
TaskManagerEndProcessEnabled_Policy="Enable ending processes in the Browser task manager"
TaskManagerEndProcessEnabled_Explain="If you enable or don't configure this policy, users can end processes in the Browser task manager. If you disable it, users can't end processes, and the End process button is disabled in the Browser task manager.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#taskmanagerendprocessenabled"
TotalMemoryLimitMb_Policy="Set limit on megabytes of memory a single Microsoft Edge instance can use"
TotalMemoryLimitMb_Explain="Configures the amount of memory that a single Microsoft Edge instance can use before tabs start getting discarded to save memory. The memory used by the tab will be freed and the tab will have to be reloaded when switched to.\n\nIf you enable this policy, the browser will start to discard tabs to save memory once the limitation is exceeded. However, there is no guarantee that the browser is always running under the limit. Any value under 1024 will be rounded up to 1024.\n\nIf you don't set this policy, the browser will only attempt to save memory when it has detected that the amount of physical memory on its machine is low.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#totalmemorylimitmb"
TotalMemoryLimitMb_Part="Set memory limit for Microsoft Edge instances"
TrackingPrevention_Policy="Block tracking of users' web-browsing activity"
TrackingPrevention_Explain="Lets you decide whether to block websites from tracking users' web-browsing activity.\n\nIf you disable this policy or don't configure it, users can set their own level of tracking prevention.\n\nPolicy options mapping:\n\n* TrackingPreventionOff (0) = Off (no tracking prevention)\n\n* TrackingPreventionBasic (1) = Basic (blocks harmful trackers, content and ads will be personalized)\n\n* TrackingPreventionBalanced (2) = Balanced (blocks harmful trackers and trackers from sites user has not visited; content and ads will be less personalized)\n\n* TrackingPreventionStrict (3) = Strict (blocks harmful trackers and majority of trackers from all sites; content and ads will have minimal personalization. Some parts of sites might not work)\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#trackingprevention"
TrackingPrevention_Part="Block tracking of users' web-browsing activity"
TrackingPrevention_TrackingPreventionOff_DropDown="Off (no tracking prevention)"
TrackingPrevention_TrackingPreventionBasic_DropDown="Basic (blocks harmful trackers, content and ads will be personalized)"
TrackingPrevention_TrackingPreventionBalanced_DropDown="Balanced (blocks harmful trackers and trackers from sites user has not visited; content and ads will be less personalized)"
TrackingPrevention_TrackingPreventionStrict_DropDown="Strict (blocks harmful trackers and majority of trackers from all sites; content and ads will have minimal personalization. Some parts of sites might not work)"
TranslateEnabled_Policy="Aktiver oversettelse"
TranslateEnabled_Explain="Enables the integrated Microsoft translation service on Microsoft Edge.\n\nIf you enable this policy, Microsoft Edge offers translation functionality to the user by showing an integrated translate flyout when appropriate, and a translate option on the right-click context menu.\n\nDisable this policy to disable all built-in translate features.\n\nIf you don't configure the policy, users can choose whether to use the translation functionality or not.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#translateenabled"
TravelAssistanceEnabled_Policy="Enable travel assistance"
TravelAssistanceEnabled_Explain="Configure this policy to allow/disallow travel assistance.\n\nThe travel assistance feature gives helpful and relevant information to a user who performs Travel related task within the browser. This feature provides trusted and validated suggestions / information  to the users from across sources gathered by Microsoft.\n\nIf you enable or don't configure this setting, travel assistance will be enabled for the users when they are performing travel related tasks.\n\nIf you disable this setting, travel assistance will be disabled and  users will not be able to see any travel related recommendations.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#travelassistanceenabled"
TripleDESEnabled_Policy="Enable 3DES cipher suites in TLS"
TripleDESEnabled_Explain="'Warning: 3DES will be completely removed from Microsoft Edge in version 95 (around October 2021) and this policy will stop working then.\n\nIf the policy is set to true, then 3DES cipher suites in TLS will be enabled. If it is set to false, they will be disabled. If the policy is unset, 3DES cipher suites are disabled by default. This policy may be used to temporarily retain compatibility with an outdated server. This is a stopgap measure and the server should be reconfigured.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#tripledesenabled"
U2fSecurityKeyApiEnabled_Policy="Allow using the deprecated U2F Security Key API (deprecated)"
U2fSecurityKeyApiEnabled_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nThis policy is deprecated because it's intended to be a short-term mechanism to give enterprises more time to update their web content when it's found to be incompatible with the change to remove the U2F Security Key API. It won't work in Microsoft Edge version 104.\n\nIf you enable this policy, the deprecated U2F Security Key API can be used and the deprecation reminder prompt shown for U2F API requests is suppressed.\n\nIf you disable this policy or don't configure it, the U2F Security Key API is disabled by default and can only be used by sites that register for and use the U2FSecurityKeyAPI origin trial which ends in Microsoft Edge version 104.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#u2fsecuritykeyapienabled"
URLAllowlist_Policy="Define a list of allowed URLs"
URLAllowlist_Explain="Setting the policy provides access to the listed URLs, as exceptions to 'URLBlocklist' (Blokker tilgang til en liste over nettadresser).\n\nFormat the URL pattern according to https://go.microsoft.com/fwlink/?linkid=2095322.\n\nYou can use this policy to open exceptions to restrictive block lists. For example, you can include '*' in the block list to block all requests, and then use this policy to allow access to a limited list of URLs. You can use this policy to open exceptions to certain schemes, subdomains of other domains, ports, or specific paths.\n\nThe most specific filter determines if a URL is blocked or allowed. The allowed list takes precedence over the block list.\n\nThis policy is limited to 1000 entries; subsequent entries are ignored.\n\nThis policy also allows the browser to automatically invoke external applications registered as protocol handlers for protocols like "tel:" or "ssh:".\n\nIf you don't configure this policy, there are no exceptions to the block list in the 'URLBlocklist' policy.\n\nThis policy does not work as expected with file://* wildcards.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#urlallowlist"
URLAllowlist_Part="Define a list of allowed URLs"
URLBlocklist_Policy="Blokker tilgang til en liste over nettadresser"
URLBlocklist_Explain="Define a list of sites, based on URL patterns, that are blocked (your users can't load them).\n\nFormat the URL pattern according to https://go.microsoft.com/fwlink/?linkid=2095322.\n\nYou can define exceptions in the 'URLAllowlist' (Define a list of allowed URLs) policy. These policies are limited to 1000 entries; subsequent entries are ignored.\n\nNote that blocking internal 'edge://*' URLs isn't recommended - this may lead to unexpected errors.\n\nThis policy doesn't prevent the page from updating dynamically through JavaScript. For example, if you block 'contoso.com/abc', users might still be able to visit 'contoso.com' and click on a link to visit 'contoso.com/abc', as long as the page doesn't refresh.\n\nIf you don't configure this policy, no URLs are blocked.\n\nThis policy does not work as expected with file://* wildcards.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#urlblocklist"
URLBlocklist_Part="Blokker tilgang til en liste over nettadresser"
UserAgentClientHintsEnabled_Policy="Enable the User-Agent Client Hints feature (obsolete)"
UserAgentClientHintsEnabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 93.\n\nThis policy is obsolete because it was intended for short-term adaptation purposes only. It doesn't work in Microsoft Edge after version 93.\n\nWhen enabled the User-Agent Client Hints feature sends granular request headers that provide information about the user browser (for example, the browser version) and environment (for example, the system architecture).\n\nThis is an additive feature, but the new headers may break some websites that restrict the characters that requests may contain.\n\nIf you enable or don't configure this policy, the User-Agent Client Hints feature is enabled. If you disable this policy, this feature is unavailable.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#useragentclienthintsenabled"
UserAgentReduction_Policy="Enable or disable the User-Agent Reduction"
UserAgentReduction_Explain="The User-Agent HTTP request header is scheduled to be reduced. To facilitate testing and compatibility, this policy can enable the reduction feature for all websites, or disable the ability for origin trials, or field trials to enable the feature.\n\nIf you don't configure this policy or set it to Default, User-Agent will be controlled by experimentation.\n\nSet this policy to 'ForceEnabled' to force the reduced version of the  User-Agent request header.\n\nSet this policy to 'ForceDisabled' to force the full version of the  User-Agent request header.\n\nTo learn more about the User-Agent string, read here:\n\nhttps://go.microsoft.com/fwlink/?linkid=2186267\n\n\nPolicy options mapping:\n\n* Default (0) = User-Agent reduction will be controllable via Experimentation\n\n* ForceDisabled (1) = User-Agent reduction diabled, and not enabled by Experimentation\n\n* ForceEnabled (2) = User-Agent reduction will be enabled for all origins\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#useragentreduction"
UserAgentReduction_Part="Enable or disable the User-Agent Reduction"
UserAgentReduction_Default_DropDown="User-Agent reduction will be controllable via Experimentation"
UserAgentReduction_ForceDisabled_DropDown="User-Agent reduction diabled, and not enabled by Experimentation"
UserAgentReduction_ForceEnabled_DropDown="User-Agent reduction will be enabled for all origins"
UserDataDir_Policy="Set the user data directory"
UserDataDir_Explain="Set the directory to use for storing user data.\n\nIf you enable this policy, Microsoft Edge uses the specified directory regardless of whether the user has set the '--user-data-dir' command-line flag.\n\nIf you don't enable this policy, the default profile path is used, but the user can override it by using the '--user-data-dir' flag. Users can find the directory for the profile at edge://version/ under profile path.\n\nTo avoid data loss or other errors, don't configure this policy to a volume's root directory or to a directory that's used for other purposes, because Microsoft Edge manages its contents.\n\nSee https://go.microsoft.com/fwlink/?linkid=2095041 for a list of variables that can be used.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#userdatadir"
UserDataDir_Part="Set the user data directory"
UserDataSnapshotRetentionLimit_Policy="Limits the number of user data snapshots retained for use in case of emergency rollback"
UserDataSnapshotRetentionLimit_Explain="Following each major version update, Microsoft Edge will create a snapshot of parts of the user's browsing data to use in case of a later emergency that requires a temporary version rollback. If a temporary rollback is performed to a version for which a user has a corresponding snapshot, the data in the snapshot is restored. This lets users keep settings such as bookmarks and autofill data.\n\nIf you don't set this policy, the default value of 3 snapshots is used.\n\nIf you set this policy, old snapshots are deleted as needed to respect the limit you set. If you set this policy to 0, no snapshots are taken.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#userdatasnapshotretentionlimit"
UserDataSnapshotRetentionLimit_Part="Limits the number of user data snapshots retained for use in case of emergency rollback"
UserFeedbackAllowed_Policy="Tillat brukertilbakemeldinger"
UserFeedbackAllowed_Explain="Microsoft Edge uses the Edge Feedback feature (enabled by default) to allow users to send feedback, suggestions or customer surveys and to report any issues with the browser. Also, by default, users can't disable (turn off) the Edge Feedback feature.\n\nIf you enable this policy or don't configure it, users can invoke Edge Feedback.\n\nIf you disable this policy, users can't invoke Edge Feedback.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#userfeedbackallowed"
VerticalTabsAllowed_Policy="Configures availability of a vertical layout for tabs on the side of the browser"
VerticalTabsAllowed_Explain="Configures whether a user can access an alternative layout where tabs are vertically aligned on the side of the browser instead of at the top.\nWhen there are several tabs open, this layout provides better tab viewing and management. There's better visibility of the site titles,\nit's easier to scan aligned icons, and there's more space to manage and close tabs.\n\nIf you disable this policy, then the vertical tab layout will not be available as an option for users.\n\nIf you enable or don't configure this policy, the tab layout will still be at the top, but a user has the option to turn on vertical tabs on the side.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#verticaltabsallowed"
VideoCaptureAllowed_Policy="Allow or block video capture"
VideoCaptureAllowed_Explain="Control whether sites can capture video.\n\nIf enabled or not configured (default), the user will be asked about video capture access for all sites except those with URLs configured in the 'VideoCaptureAllowedUrls' (Sites that can access video capture devices without requesting permission) policy list, which will be granted access without prompting.\n\nIf you disable this policy, the user isn't prompted, and video capture is only available to URLs configured in 'VideoCaptureAllowedUrls' policy.\n\nThis policy affects all types of video inputs, not only the built-in camera.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#videocaptureallowed"
VideoCaptureAllowedUrls_Policy="Sites that can access video capture devices without requesting permission"
VideoCaptureAllowedUrls_Explain="Specify websites, based on URL patterns, that can use video capture devices without asking the user for permission. Patterns in this list are matched against the security origin of the requesting URL. If they match, the site is automatically granted access to video capture devices.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#videocaptureallowedurls"
VideoCaptureAllowedUrls_Part="Sites that can access video capture devices without requesting permission"
VisualSearchEnabled_Policy="Visual search enabled"
VisualSearchEnabled_Explain="Visual search lets you quickly explore more related content about entities in an image.\n\nIf you enable or don't configure this policy, visual search will be enabled via image hover, context menu, and search in sidebar.\n\nIf you disable this policy, visual search will be disabled and you won't be able to get more info about images via hover, context menu, and search in sidebar.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#visualsearchenabled"
WPADQuickCheckEnabled_Policy="Set WPAD optimization"
WPADQuickCheckEnabled_Explain="Allows you to turn off WPAD (Web Proxy Auto-Discovery) optimization in Microsoft Edge.\n\nIf you disable this policy, WPAD optimization is disabled, which makes the browser wait longer for DNS-based WPAD servers.\n\nIf you enable or don't configure the policy, WPAD optimization is enabled.\n\nIndependent of whether or how this policy is enabled, the WPAD optimization setting cannot be changed by users.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#wpadquickcheckenabled"
WebAppInstallForceList_Policy="Konfigurer en liste over administratorinstallerte nettprogrammer"
WebAppInstallForceList_Explain="Configure this policy to specify a list of web apps that install silently, without user interaction, and which users can't uninstall or turn off.\n\nEach list item of the policy is an object with a mandatory member:\nurl (the URL of the web app to install)\n\nand 5 optional members:\n- default_launch_container\n(specifies the window mode that the web app opens with-a new tab is the\ndefault.)\n\n- create_desktop_shortcut\n(True if you want to create Linux and\nMicrosoft Windows desktop shortcuts).\n\n- fallback_app_name\n(Starting with Microsoft Edge version 90,\nallows you to override the app name if it is not a\nProgressive Web App (PWA), or the app name that is temporarily\ninstalled if it is a PWA but authentication is required before the\ninstallation can be completed. If both\ncustom_name and\nfallback_app_name are provided,\nthe latter will be ignored.)\n\n- custom_name\n(Allows you to permanently override the app name for all web\napps and PWAs. Not currently supported in Microsoft Edge.)\n\n- custom_icon\n(Allows you to override the app icon of installed apps. The icons have to\nbe square, maximal 1 MB in size, and in one of the following formats:\njpeg, png, gif, webp, ico. The hash value has to be the SHA256\nhash of the icon file. Not currently supported in Microsoft Edge.)\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webappinstallforcelist"
WebAppInstallForceList_Part="Konfigurer en liste over administratorinstallerte nettprogrammer"
WebCaptureEnabled_Policy="Enable web capture feature in Microsoft Edge"
WebCaptureEnabled_Explain="Enables the web capture feature in Microsoft Edge that allows users to capture web content and annotate the capture using inking tools.\nIf you enable this policy or don't configure it, the Web capture option shows up in the context menu, Settings and more menu, and by using the keyboard shortcut, CTRL+SHIFT+S.\nIf you disable this policy, users can't access the web capture feature in Microsoft Edge.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webcaptureenabled"
WebComponentsV0Enabled_Policy="Re-enable Web Components v0 API until M84 (obsolete)"
WebComponentsV0Enabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 84.\n\nThis policy doesn't work because this policy allowed these features to be selectively re-enabled until Microsoft Edge version 85. The Web Components v0 APIs (Shadow DOM v0, Custom Elements v0, and HTML Imports) were deprecated in 2018, and have been disabled by default starting in Microsoft Edge version 80.\n\nIf you set this policy is set to True, the Web Components v0 features will be enabled for all sites.\n\nIf you set this policy to False or don't set this policy, the Web Components v0 features will be disabled by default, starting in Microsoft Edge version 80.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webcomponentsv0enabled"
WebDriverOverridesIncompatiblePolicies_Policy="Tillat at WebDriver overstyrer inkompatible regler (obsolete)"
WebDriverOverridesIncompatiblePolicies_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 84.\n\nThis policy doesn't work because WebDriver is now compatible with all existing policies.\n\nThis policy allows users of the WebDriver feature to override\npolicies which can interfere with its operation.\n\nCurrently this policy disables 'SitePerProcess' (Enable site isolation for every site) and 'IsolateOrigins' (Enable site isolation for specific origins) policies.\n\nIf the policy is enabled, WebDriver will be able to override incomaptible\npolicies.\nIf the policy is disabled or not configured, WebDriver will not be allowed\nto override incompatible policies.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webdriveroverridesincompatiblepolicies"
WebRtcAllowLegacyTLSProtocols_Policy="Allow legacy TLS/DTLS downgrade in WebRTC (deprecated)"
WebRtcAllowLegacyTLSProtocols_Explain="DEPRECATED: This policy is deprecated. It is currently supported but will become obsolete in a future release.\n\nIf you enable this policy, WebRTC peer connections can downgrade to obsolete\nversions of the TLS/DTLS (DTLS 1.0, TLS 1.0 and TLS 1.1) protocols.\nIf you disable or don't set this policy, these TLS/DTLS versions are\ndisabled.\n\nThis policy is temporary and will be removed in a future version\nof Microsoft Edge.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webrtcallowlegacytlsprotocols"
WebRtcLocalIpsAllowedUrls_Policy="Manage exposure of local IP addressess by WebRTC"
WebRtcLocalIpsAllowedUrls_Explain="Specifies a list of origins (URLs) or hostname patterns (like "*contoso.com*") for which local IP address should be exposed by WebRTC.\n\nIf you enable this policy and set a list of origins (URLs) or hostname patterns, when edge://flags/#enable-webrtc-hide-local-ips-with-mdns is Enabled, WebRTC will expose the local IP address for cases that match patterns in the list.\n\nIf you disable or don't configure this policy, and edge://flags/#enable-webrtc-hide-local-ips-with-mdns is Enabled, WebRTC will not expose local IP addresses. The local IP address is concealed with an mDNS hostname.\n\nIf you enable, disable, or don't configure this policy, and edge://flags/#enable-webrtc-hide-local-ips-with-mdns is Disabled, WebRTC will expose local IP addresses.\n\nPlease note that this policy weakens the protection of local IP addresses that might be needed by administrators.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webrtclocalipsallowedurls"
WebRtcLocalIpsAllowedUrls_Part="Manage exposure of local IP addressess by WebRTC"
WebRtcLocalhostIpHandling_Policy="Restrict exposure of local IP address by WebRTC"
WebRtcLocalhostIpHandling_Explain="Allows you to set whether or not WebRTC exposes the user's local IP address.\n\nIf you set this policy to "AllowAllInterfaces" or "AllowPublicAndPrivateInterfaces", WebRTC exposes the local IP address.\n\nIf you set this policy to "AllowPublicInterfaceOnly" or "DisableNonProxiedUdp", WebRTC doesn't expose the local IP address.\n\nIf you don't set this policy, or if you disable it, WebRTC exposes the local IP address.\n\nPolicy options mapping:\n\n* AllowAllInterfaces (default) = Allow all interfaces. This exposes the local IP address\n\n* AllowPublicAndPrivateInterfaces (default_public_and_private_interfaces) = Allow public and private interfaces over http default route. This exposes the local IP address\n\n* AllowPublicInterfaceOnly (default_public_interface_only) = Allow public interface over http default route. This doesn't expose the local IP address\n\n* DisableNonProxiedUdp (disable_non_proxied_udp) = Use TCP unless proxy server supports UDP. This doesn't expose the local IP address\n\nUse the preceding information when configuring this policy.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webrtclocalhostiphandling"
WebRtcLocalhostIpHandling_Part="Restrict exposure of local IP address by WebRTC"
WebRtcLocalhostIpHandling_AllowAllInterfaces_DropDown="Allow all interfaces. This exposes the local IP address"
WebRtcLocalhostIpHandling_AllowPublicAndPrivateInterfaces_DropDown="Allow public and private interfaces over http default route. This exposes the local IP address"
WebRtcLocalhostIpHandling_AllowPublicInterfaceOnly_DropDown="Allow public interface over http default route. This doesn't expose the local IP address"
WebRtcLocalhostIpHandling_DisableNonProxiedUdp_DropDown="Use TCP unless proxy server supports UDP. This doesn't expose the local IP address"
WebRtcRespectOsRoutingTableEnabled_Policy="Enable support for Windows OS routing table rules when making peer to peer connections via WebRTC"
WebRtcRespectOsRoutingTableEnabled_Explain="Controls whether WebRTC will respect the Windows OS routing table rules when making peer to peer connections, thus enabling split tunnel VPNs.\n\nIf you disable this policy or don't configure it, WebRTC will not consider the routing table and may make peer to peer connections over any available network.\n\nIf you enable this policy, WebRTC will prefer to make peer to peer connections using the indicated network interface for the remote address as indicated in the routing table.\n\nThis policy is only available on Windows.\n\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webrtcrespectosroutingtableenabled"
WebRtcUdpPortRange_Policy="Begrens området for lokale UDP-porter som brukes av WebRTC"
WebRtcUdpPortRange_Explain="Restricts the UDP port range used by WebRTC to a specified port interval (endpoints included).\n\nBy configuring this policy, you specify the range of local UDP ports that WebRTC can use.\n\nIf you don't configure this policy, or if you set it to an empty string or invalid port range, WebRTC can use any available local UDP port.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webrtcudpportrange"
WebRtcUdpPortRange_Part="Begrens området for lokale UDP-porter som brukes av WebRTC"
WebSQLInThirdPartyContextEnabled_Policy="Force WebSQL in third-party contexts to be re-enabled (obsolete)"
WebSQLInThirdPartyContextEnabled_Explain="OBSOLETE: This policy is obsolete and doesn't work after Microsoft Edge 100.\n\nThis policy is obsolete because it was intended to be a short-term mechanism to give enterprises more time to update their web content when it's found to be incompatible with the change to disable WebSQL in third-party contexts. It doesn't work in Microsoft Edge after version 100.\n\nWebSQL in third-party contexts (for example, cross-site iframes) is off by default as of Microsoft Edge version 97 and was fully removed in version 101.\n\nIf you enable this policy, WebSQL in third-party contexts will be re-enabled.\n\nIf you disable this policy or don't configure it, WebSQL in third-party contexts will stay off.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#websqlinthirdpartycontextenabled"
WebWidgetAllowed_Policy="Enable the Edge bar"
WebWidgetAllowed_Explain="Enables the Edge bar. When enabled, users can use the Edge bar to search the web from their desktop or from an application. The Edge bar provides a search box that shows web suggestions and opens all web searches in Microsoft Edge. The search box provides search (powered by Bing) and URL suggestions. The Edge bar also includes feed tiles that users can click to see more information on msn.com in a new Microsoft Edge browser tab or window. The feed tiles may include ads. The Edge bar can be launched from the Microsoft Edge settings or from the "More tools" menu in Microsoft Edge.\n\nIf you enable or don't configure this policy:\n  The Edge bar will be automatically enabled for all profiles.\n  In the Microsoft Edge settings, users will see option to launch the Edge bar.\n  In the Microsoft Edge settings, users will see the menu item to run the Edge bar at Windows startup (auto-start).\n    The option to enable the Edge bar at startup will be toggled on if the 'WebWidgetIsEnabledOnStartup' (Allow the Edge bar at Windows startup) policy is enabled.\n    If the 'WebWidgetIsEnabledOnStartup' is disabled or not configured, the option to enable the Edge bar at startup will be toggled off.\n  Users will see the menu item to launch the Edge bar from the Microsoft Edge "More tools" menu. Users can launch the Edge bar from "More tools".\n  The Edge bar can be turned off by the "Quit" option in the System tray or by closing the Edge bar from the taskbar. The Edge bar will be restarted on system reboot if auto-start is enabled.\n\nIf you disable this policy:\n  The Edge bar will be disabled for all profiles.\n  The option to launch the Edge bar from Microsoft Edge Settings will be disabled.\n  The option to launch start the Edge bar at Windows startup (auto-start) will be disabled.\n  The option to launch the Edge bar from Microsoft Edge "More tools" menu will be disabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webwidgetallowed"
WebWidgetIsEnabledOnStartup_Policy="Allow the Edge bar at Windows startup"
WebWidgetIsEnabledOnStartup_Explain="Allows the Edge bar to start running at Windows startup.\n\nIf you enable:\n  The Edge bar will start running at Windows startup by default.\n  If the Edge bar is disabled via 'WebWidgetAllowed' (Enable the Edge bar) policy, this policy will not start the Edge bar on Windows startup.\n\nIf you disable this policy:\n  The Edge bar will not start at Windows startup for all profiles.\n  The option to start the Edge bar at Windows startup will be disabled and toggled off in Microsoft Edge settings.\n\nIf you don't configure the policy:\n  The Edge bar will not start at Windows startup for all profiles.\n  The option to start the Edge bar at Windows startup will be toggled off in Microsoft Edge settings.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#webwidgetisenabledonstartup"
WinHttpProxyResolverEnabled_Policy="Use Windows proxy resolver"
WinHttpProxyResolverEnabled_Explain="This policy will be superseded by a similar feature in a future release. For more information, see https://crbug.com/1032820.\n\nUse Windows to resolve proxies for all browser networking instead of the proxy resolver built into Microsoft Edge. The Windows proxy resolver enables Windows proxy features such as DirectAccess/NRPT.\n\nThis policy comes with the problems described by https://crbug.com/644030. It causes PAC files to be fetched and executed by Windows code, including PAC files set via the 'ProxyPacUrl' (Set the proxy .pac file URL) policy. Since Network Fetches for the PAC file happen via Windows instead of Microsoft Edge code, network policies such as 'DnsOverHttpsMode' (Control the mode of DNS-over-HTTPS) will not apply to network fetches for a PAC file.\n\nIf you enable this policy, the Windows proxy resolver will be used.\n\nIf you disable or don't configure this policy, the Microsoft Edge proxy resolver will be used.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#winhttpproxyresolverenabled"
WindowOcclusionEnabled_Policy="Enable Window Occlusion"
WindowOcclusionEnabled_Explain="Enables window occlusion in Microsoft Edge.\n\nIf you enable this setting, to reduce CPU and power consumption Microsoft Edge will detect when a window is covered by other windows, and will suspend work painting pixels.\n\nIf you disable this setting Microsoft Edge will not detect when a window is covered by other windows.\n\nIf this policy is left not set, window hiding detection will be enabled.\n\nReferanse: https://docs.microsoft.com/DeployEdge/microsoft-edge-policies#windowocclusionenabled"
SUPPORTED_WIN7_V77="Microsoft Edge version 77, Windows 7 or later"
SUPPORTED_WIN7_V78="Microsoft Edge version 78, Windows 7 or later"
SUPPORTED_WIN7_V79="Microsoft Edge version 79, Windows 7 or later"
SUPPORTED_WIN7_V80="Microsoft Edge version 80, Windows 7 or later"
SUPPORTED_WIN7_V81="Microsoft Edge version 81, Windows 7 or later"
SUPPORTED_WIN7_V83="Microsoft Edge version 83, Windows 7 or later"
SUPPORTED_WIN7_V84="Microsoft Edge version 84, Windows 7 or later"
SUPPORTED_WIN7_V85="Microsoft Edge version 85, Windows 7 or later"
SUPPORTED_WIN7_V86="Microsoft Edge version 86, Windows 7 or later"
SUPPORTED_WIN7_V87="Microsoft Edge version 87, Windows 7 or later"
SUPPORTED_WIN7_V88="Microsoft Edge version 88, Windows 7 or later"
SUPPORTED_WIN7_V89="Microsoft Edge version 89, Windows 7 or later"
SUPPORTED_WIN7_V90="Microsoft Edge version 90, Windows 7 or later"
SUPPORTED_WIN7_V91="Microsoft Edge version 91, Windows 7 or later"
SUPPORTED_WIN7_V92="Microsoft Edge version 92, Windows 7 or later"
SUPPORTED_WIN7_V93="Microsoft Edge version 93, Windows 7 or later"
SUPPORTED_WIN7_V94="Microsoft Edge version 94, Windows 7 or later"
SUPPORTED_WIN7_V95="Microsoft Edge version 95, Windows 7 or later"
SUPPORTED_WIN7_V96="Microsoft Edge version 96, Windows 7 or later"
SUPPORTED_WIN7_V97="Microsoft Edge version 97, Windows 7 or later"
SUPPORTED_WIN7_V98="Microsoft Edge version 98, Windows 7 or later"
SUPPORTED_WIN7_V99="Microsoft Edge version 99, Windows 7 or later"
SUPPORTED_WIN7_V100="Microsoft Edge version 100, Windows 7 or later"
SUPPORTED_WIN7_V101="Microsoft Edge version 101, Windows 7 or later"
SUPPORTED_WIN7_ONLY_V77="Microsoft Edge version 77, Windows 7"
SUPPORTED_WIN7_ONLY_V86="Microsoft Edge version 86, Windows 7"
OBSOLETE_WIN7_V79_V85="Microsoft Edge version 79-85, Windows 7 or later"
OBSOLETE_WIN7_V81_V85="Microsoft Edge version 81-85, Windows 7 or later"
OBSOLETE_WIN7_V81_V88="Microsoft Edge version 81-88, Windows 7 or later"
OBSOLETE_WIN7_V84_V96="Microsoft Edge version 84-96, Windows 7 or later"
OBSOLETE_WIN7_V77_V84="Microsoft Edge version 77-84, Windows 7 or later"
OBSOLETE_WIN7_V86_V93="Microsoft Edge version 86-93, Windows 7 or later"
OBSOLETE_WIN7_V78_V83="Microsoft Edge version 78-83, Windows 7 or later"
OBSOLETE_WIN7_V77_V87="Microsoft Edge version 77-87, Windows 7 or later"
OBSOLETE_WIN7_V77_V90="Microsoft Edge version 77-90, Windows 7 or later"
OBSOLETE_WIN7_V85_V91="Microsoft Edge version 85-91, Windows 7 or later"
OBSOLETE_WIN7_V81_V84="Microsoft Edge version 81-84, Windows 7 or later"
OBSOLETE_WIN7_V79_V99="Microsoft Edge version 79-99, Windows 7 or later"
OBSOLETE_WIN7_V95_V98="Microsoft Edge version 95-98, Windows 7 or later"
OBSOLETE_WIN7_V77_V86="Microsoft Edge version 77-86, Windows 7 or later"
OBSOLETE_WIN7_V80_V94="Microsoft Edge version 80-94, Windows 7 or later"
OBSOLETE_WIN7_V79_V86="Microsoft Edge version 79-86, Windows 7 or later"
OBSOLETE_WIN7_V79_V92="Microsoft Edge version 79-92, Windows 7 or later"
OBSOLETE_WIN7_V78_V87="Microsoft Edge version 78-87, Windows 7 or later"
OBSOLETE_WIN7_V86_V94="Microsoft Edge version 86-94, Windows 7 or later"
OBSOLETE_WIN7_V80_V84="Microsoft Edge version 80-84, Windows 7 or later"
OBSOLETE_WIN7_V97_V100="Microsoft Edge version 97-100, Windows 7 or later"
OBSOLETE_WIN7_V77_V88="Microsoft Edge version 77-88, Windows 7 or later"